ME57 transaction with ALV scope of list
hi all!
i want to run ME57 transaction with ALV scope of list, but i'm facing a problem because if the list of requirements are bigger than 50 recors, the system says that 'Max. 50 requirements can be processed simultaneously' and I can not assign source of supply to all my list. I guess this will be customizable, because if I run it with A scope of list, there's no limit of processing.
how can I change that value in order to be able to process all the requirements of my list in ALV view?
thanks in advance.
Fabian
Hello Fabian ,
This limit is maintained in class CL_REQUISITION_AGGREGATE_MM
attribute N_EDIT_MAXIMUM initial value 50.
If you want , this value can be changed using transaction code SE24. However , please take note that this change is considered a modificationto the SAP standard system and will no longer be supported.
I hope this information has been helpful.
Best Regards,
Frank
Similar Messages
-
ME57 transaction with possibility to show in ALV layout
Hi experts,
I need change the alv grid in the transaction ME57. To this, I copied the program RM06BZ00 (scree, includes... )
When I try execute the program with ALV layout the message ''Scope of list ALV not defined (please correct)" shows.
To resolve this problem I change the parameter im_service in the ME_REP_GET_TABLE_MANAGER function (Way to function: program ZSAPFM06B / include ZFM06BF04 / Include ZFM06BF04_PRUEFEN_LSTUB)
When I change this parameter on Debug (manual change) the ALV shows correctly, but when I change in program code the message remains.
How the way to copy the Me57 transaction with possibility to show in ALV layout?
Follows the code change:
CALL FUNCTION 'ME_REP_GET_TABLE_MANAGER'
EXPORTING
im_service = 'RM06BZ00'
im_scope = l_scope
IMPORTING
ex_manager = gf_factory.
Thank you!
Edited by: Andréa Molina on Aug 4, 2011 5:12 PM
Edited by: Rob Burbank on Aug 5, 2011 9:22 AMI solved my own problem...
The change in im_service was right.
The problem is that:
The gf_factory back empty in some places and in standrad transaction back with values. The memory clean the gf_factory result.
So... the only way to show ALV is fill the gf_factory in anywhere the gf_factory is check.
The places are:
1. sapfm06b - fm06bf04 - fm06bf04_pruefen_lstub
Call in RM06BZ00 - perform pruefen_lstub(sapfm06b) using p_lstub.
2. sapfm06b - fm06bfsl - fm06bfsl_ban_aufbauen
Call in RM06BZ00 - ban_aufbauen(sapfm06b).
3. sapfm06b - fm06bf01- fm06bf01_submit
Call in RM06BZ00 - perform perform submit(zgb_sapfm06b) using sucomm.
If the gf_factory is filled in this places... The ALV will show! -
ALV Scope of List but not ZME55
Our Technical team Created a Z Tranx copying ME55.
ME55 was executing successfully in ALV Scope of List but not ZME55.
Error: Scope of list ALV not defined (please correct)
Any suggestions.
Is it a functional issue or a technical one?
Thanks in advance.
RijuHi,
In customizing:
Scope of list (ALV) is maintained in the below path:
SPRO->Materials management ->Purchasing->Reporting->Scope of list-
>Define scope of list is maintained. Please mantain your Z transaction.
Best Regards,
Arminda Jack -
Hi!
Here we are trying to amend the ME55 Tranx and have created a Z Tranx ZME55. How do I get the output in ALV format?
Now, If I select ALV, it is saying:
u201CScope of list ALV not defined (please correct)
Message no. ME287u201D
Is it a Functional change or a Technical Change?
Regards,
Riju.The standard transaction checks whether a entry has been maintained in the table T16LB or T16LL etc... these tables store the Scope of List for particular functional areas. If it doesnt find an entry in these tables it gives an error message. ME 287..
Check for location in the Z Transaction and the values for its search. You can remove the check(Select Statement) and add new conditions as this is a Copy of standard transaction.
Hope this helps !!
Kanchan -
Hi Experts,
I am modifying ME5j Transaction : Program : RM06BKPS
I just copied the standard program into Zprogram.
I haven't made any changes just copied to Zprogram.
when i am executing Zprogram
i gave Prject definition :XXXXXXXX
and Scope of list = ALV
I am getting error : Scope of list ALV not defined (please correct)
I am getting output for scope of list : A,B,B1,B2,B3,C,C1,D,F,G,H,I,J
I want output in ALV format..
Pls guide me
Regards.
Vinay.Hi,
In customizing:
Scope of list (ALV) is maintained in the below path:
SPRO->Materials management ->Purchasing->Reporting->Scope of list-
>Define scope of list is maintained. Please mantain your Z transaction.
Best Regards,
Arminda Jack -
As per scope of list order type has changed in ME57
Hi,
I have created PR in doc type NB and using t-code Me57 i have tried to create PO, with selection scope of list A it is going correct means as per the requirement order type shows ZAB and when i select scope of list ZALV which has customized then tried to create PO now order type shows NB.
Please guide me.
Thanks
ShitalHi,
I have tried this and scope of list A is working but ZALV is not working
Thanks
Shital -
Hi,
I copy program RM06BA00 (transaction ME5A) to Z program.
when i run the z program and change the parameter scope of list to ALV i get the message
Scope of list ALV not defined .
any idea way and how solve the problem ?
thanks
Itziki got the problem
in fm
ME_REP_GET_TABLE_MANAGER --> l_factory(object) -->im_service(variable)
l_active = l_factory->is_active( im_service = l_service im_scope = im_scope ).
im_service variable has programe name, im_scope has "ALV" . then it execution goes in case statement where it checks the im_service with standard prog name.
as in case im_service has zprog, so it doesnt go to any when case and hence the prob.
any sugesstion..?????
Neha -
Config Scope of list ALV as default for reports ME5A / ME5J / ME5K
Hi all,
We had performed configuration SPRO> Materials management-> purchasing> reporting>maintain pur.list->scope of list->define default values for transaction to set ALV as default scope of list for a number of transactions.
It is all okay for transactions: ME2B, ME2C, ME2J, .... ME3B, ME3C, ME3J, ME3K, ME3L, ME3M. But for ME5A / ME5J / ME5K, the default of scope of list became "A" (3-line + n special) instead of "ALV" even the configruation had been done.
How can we solve this? Thanks.
Regards,
DonaldDear Donald,
For T-code ME5A / ME5J / ME5K Configuration path is Materials management-> purchasing> reporting-->maintain PURCHASE REQUSTION LISTS --->define default values for transactions to set ALV as default scope of list.
This will definately solve your problem.,
Thanks,
Shekhar Gaikwad -
Hi MM gurus ,
I have a query when i am executing the report for scope of list : I one line loop , can i get thr Release date column also ?
Pl guide .Hi
ME57 list is gove the release date also
sample data with scope of list "A" in selection screen:
Material Short text PGp Mat. gp.
Requisn. Item Requested qty. Un Deliv. date Requester Plnt SLoc
S C R OTy. I A Ordered qty. Un Release date Trackg.no. SPl. MC
990550 RTK ROVER POLE TN UHF B10 TBD
10003338 00010 1 EA D 28.04.2008 Didier Picho 3000 0002
N B NB L M 17.04.2008 ZDP
Thanks,
Kumar Arcot -
Dear Consultants,
We have taken a Z Copy of ME2N to add a few fields. Now we are not able display the report in ALV . But the ALV view is displayed in standard ME2N transaction. Kindly advise.
Regards
Irfan AhmedHi Irfan,
check in scope of list if you have maintained ZALV. -
Scope of list ALV not defined (please correct) in rm06bkps program
hi experts,
i have to add some fields in me5j t-code, for this i have copied the standard program as z prog. But at time of execution it gives an error
"Scope of list ALV not defined (please correct)
Message no. ME287"
At the time of debugging i found gf_factory object is not filled, but im unable to trace that variable
even i have searhed the same on SDN but the quetion is not answerd.
please help me out ASAP.
waiting for ur valuable replies..
thanks in advance
Nehai got the problem
in fm
ME_REP_GET_TABLE_MANAGER --> l_factory(object) -->im_service(variable)
l_active = l_factory->is_active( im_service = l_service im_scope = im_scope ).
im_service variable has programe name, im_scope has "ALV" . then it execution goes in case statement where it checks the im_service with standard prog name.
as in case im_service has zprog, so it doesnt go to any when case and hence the prob.
any sugesstion..?????
Neha -
Report with ALV tree and ALV list?
I need to create a report with layout as same as this one
[http://trangiegie.com/MyFile/output.JPG]
It looks like a report with combination of ALV tree and list. The tree works like a navigation bar. Wonder if there are any demo programs like this. Will appreciate any help.For Tree alone - You can check program : BCALV_TREE_02
Program Name Report title
BCALV_GRID_DND_TREE ALV Grid: Drag and Drop with ALV Tree
BCALV_GRID_DND_TREE_SIMPLE ALV GRID: Drag and drop with ALV tree (simple)
BCALV_TEST_COLUMN_TREE Program BCALV_TEST_COLUMN_TREE
BCALV_TEST_SIMPLE_TREE Program BCALV_TEST_SIMPLE_TREE
BCALV_TREE_01 ALV Tree Control: Build Up the Hierarchy Tree
BCALV_TREE_02 ALV Tree Control: Event Handling
BCALV_TREE_03 ALV Tree Control: Use an Own Context Menu
BCALV_TREE_04 ALV Tree Control: Add a Button to the Toolbar
BCALV_TREE_05 ALV Tree Control: Add a Menu to the Toolbar
BCALV_TREE_06 ALV tree control: Icon column and icon for nodes/items
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_DND ALV tree control: Drag & Drop within a hierarchy tree
BCALV_TREE_DND_MULTIPLE ALV tree control: Drag & Drop within a hierarchy tree
BCALV_TREE_EVENT_RECEIVER Include BCALV_TREE_EVENT_RECEIVER
BCALV_TREE_EVENT_RECEIVER01
BCALV_TREE_ITEMLAYOUT ALV Tree: Change Item Layouts at Runtime
BCALV_TREE_MOVE_NODE_TEST Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO Program BCALV_TREE_SIMPLE_DEMO
BCALV_TREE_VERIFY Verifier for ALV Tree and Simple ALV Tree -
Scope of list ALV for MM report
Hi,
somebody knows like creating a scope of list format that is ALV?exists some check to determine that the list format is ALV? I need to visualize report ME2L in ALV format.
Thanks,
RHi,
Go to path SPRO->Materials management ->Purchasing->Reporting->Scope of list->Define scope of list.
Select the scope of list for which you want to see the ALV, then click on the details button.
Check the box Use ALV grid control at the bottom.
This will provide ALV display.
P.S: If this answers your query, then please close the thread.
Regards -
Hi friends,
I have created one program with alv list, but i am unable to add one header and footer, also i have to add one logo to the program. Plese some one tell me a easy procedure to add a header, footer and also a logo. If you can show me one with example that would be very helpful.
This is my program, plz add the necessary parts.
*& Report Y_BOM2_ALV
REPORT y_bom2_alv LINE-SIZE 350 LINE-COUNT 350.
*& Include YINCLUDE1
TABLES : mast, stko, stpo.
TYPE-POOLS : slis.
DATA : BEGIN OF iall OCCURS 10,
matnr LIKE mast-matnr,
werks LIKE mast-werks,
stlan LIKE mast-stlan,
stlal LIKE mast-stlal,
stlst LIKE stko-stlst,
posnr LIKE stpo-posnr,
idnrk LIKE stpo-idnrk,
menge LIKE stpo-menge,
meins LIKE stpo-meins,
ausch LIKE stpo-ausch,
lgort LIKE stpo-lgort,
END OF iall.
DATA : i_repid LIKE sy-repid,
i_lines LIKE sy-tabix.
DATA : int_fcat TYPE slis_t_fieldcat_alv.
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE title1.
PARAMETER : p_werks LIKE mast-werks.
SELECT-OPTIONS : s_matnr FOR mast-matnr.
SELECTION-SCREEN END OF BLOCK a1.
INITIALIZATION.
title1(50) = ' Bill Of Material Input Screen '.
*& Include YINCLUDE2
START-OF-SELECTION.
SELECT mastmatnr mastwerks maststlan maststlal stko~stlst
stpoposnr stpoidnrk stpomenge stpomeins stpo~ausch
stpo~lgort INTO TABLE iall FROM stpo INNER JOIN stko ON
stpostlnr = stkostlnr INNER JOIN mast ON
stpostlnr = maststlnr WHERE mast~werks EQ
p_werks AND mast~matnr IN s_matnr.
IF sy-subrc <> 0 OR p_werks EQ ' ' OR s_matnr EQ ' '.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
titel = 'ERROR MESSAGE ( INPUT ERROR / WRONG INPUT ) '
textline1 = ' PLANT / MATERIAL Invalid or Empty '
textline2 = ' Plese enter plant no / material no again '
start_column = 20
start_row = 5.
EXIT.
ENDIF.
CLEAR i_lines.
DESCRIBE TABLE iall LINES i_lines.
IF i_lines LT 1.
WRITE: /
'No materials found.'.
EXIT.
ENDIF.
END-OF-SELECTION.
i_repid = sy-repid.
*& Include YINCLUDE3
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = i_repid
i_internal_tabname = 'IALL'
i_inclname = i_repid
CHANGING
ct_fieldcat = int_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
WRITE: /
'Returncode',
sy-subrc,
'from FUNCTION REUSE_ALV_FIELDCATALOG_MERGE'.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = i_repid
it_fieldcat = int_fcat
i_save = 'A'
TABLES
t_outtab = iall
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
WRITE: /
'Returncode',
sy-subrc,
'from FUNCTION REUSE_ALV_LIST_DISPLAY'.
ENDIF.Hi Tapodipta,
See below example and modify ur code according to ur requirement..
REPORT ZTEST_ALV_CHECK .
TYPE-POOLS: SLIS.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
L_LAYOUT type slis_layout_alv,
x_events type slis_alv_event,
it_events type SLIS_T_EVENT.
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
END OF ITAB.
SELECT VBELN
POSNR
FROM VBAP
UP TO 20 ROWS
INTO TABLE ITAB.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
x_events-NAME = SLIS_EV_END_OF_PAGE.
x_events-FORM = 'END_OF_PAGE'.
APPEND x_events TO iT_EVENTS.
CLEAR x_events .
x_events-NAME = SLIS_EV_TOP_OF_PAGE.
x_events-FORM = 'TOP_OF_PAGE'.
APPEND x_events TO iT_EVENTS.
CLEAR x_events .
x_events-NAME = slis_ev_end_of_list.
x_events-FORM = 'END_OF_LIST'.
APPEND x_events TO iT_EVENTS.
CLEAR x_events .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = L_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
it_events = it_events
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOP_OF_PAGE.
* BREAK-POINT.
WRITE: / 'TOP_OF_PAGE'.
ENDFORM.
FORM END_OF_LIST.
* BREAK-POINT.
"here you can use this for footer
WRITE: / 'FOR FOOTER'.
ENDFORM.
FORM END_OF_PAGE.
* BREAK-POINT.
WRITE: / 'END_OF_PAGE'.
ENDFORM.
Go through the link as well..
Re: ALV Footer
Hope it will solve ur problem..
<b>Reward points if useful..</b>
Thanks & Regards
ilesh 24x7 -
Hi,
I want to display on TOP of PAGE : X page / Total page with ALV LIST.
here is my code :
FORM eventtab_build USING lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = lt_events.
READ TABLE lt_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE gc_formname_top_of_page TO ls_event-form.
APPEND ls_event TO lt_events.
ENDIF.
READ TABLE lt_events WITH KEY name = slis_ev_end_of_list
INTO ls_event.
IF sy-subrc = 0.
MOVE 'END-OF-LIST' TO ls_event-form.
APPEND ls_event TO lt_events.
ENDIF.
ENDFORM. "eventtab_build
FORM top_of_page.
DATA: t_header TYPE slis_t_listheader,
wa_header TYPE slis_listheader.
DATA : lv_desc(15) TYPE c,
lv_month(2) TYPE c,
lv_year(4) TYPE c.
DATA : pageno(2) TYPE c.
lv_month = sd_augdt-high+4(2).
lv_year = sd_augdt-high(4).
SELECT SINGLE ltx FROM t247 INTO lv_desc WHERE mnr = lv_month
AND spras = sy-langu.
WRITE : /1 sd_bukrs-low.
SKIP 1.
WRITE : 50 'RELEVE DES ACHATS LIVRAISONS FACONS'.
WRITE : /52 '& TRAVAUX EFFECTUES AU MAROC'.
WRITE : /54 'OUVRANT DROIT AU DEDUCTION'.
SKIP 1.
WRITE : /1 'IDENTIFIANT FISCAL :', '1234',135 'REGIME : ENCAISSEMENT'.
SKIP 1.
IF NOT dtab-mwskz IS INITIAL.
WRITE : /54 'Code TVA: ',dtab-mwskz.
ENDIF.
WRITE : 135 'Page No :', sy-pagno RIGHT-JUSTIFIED.
WRITE : /2 'MOIS :',lv_desc,20 lv_year.
SKIP 1.
pageno = sy-pagno.
wa_header-typ = 'H'.
CONCATENATE 'PAGE NO : ' pageno ' of ' '****' INTO
wa_header-info SEPARATED BY space.
APPEND wa_header TO t_header.
CLEAR wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = gt_list_top_of_page.
it_list_commentary = t_header.
ENDFORM. "top_of_page
please, give me a guidance.
Best regards.Hi Please refer this program. You have not written exact problems here. Anyways refer below code:-
REPORT ZRIL_ALVEVENTS .
TYPE-POOLS : SLIS.
DEFINITION OF DATA INTERNAL TABLE
DATA : IT_SFLIGHT TYPE STANDARD TABLE OF SFLIGHT.
DEFINITION OF FIELDCATALOG INTERNAL TABLE
DATA : WA_FCAT TYPE SLIS_FIELDCAT_ALV, "WORK AREA FOR FIELD CATALOG
IT_FCAT TYPE SLIS_T_FIELDCAT_ALV.
DEFINITION FOR EVENT TABLE
DATA : IT_EVENTS TYPE SLIS_T_EVENT,
WA_EVENTS TYPE SLIS_ALV_EVENT. "WORK AREA FOR EVENT"
DEFINE THE NAME LIST HEADER
DATA : FORMNAME TYPE SLIS_FORMNAME VALUE 'TOP_OF_LIST'.
DEFINE THE TABLE FOR LIST OF ACTION ON EVENT SPECIFIED IN LIST HEADER
DATA : IT_ACTION TYPE SLIS_T_LISTHEADER,
WA_ACTION TYPE SLIS_LISTHEADER. " WORK AREA FOR LIST OF "
*POPULATE DATA FROM SFLIGHT TABLE
SELECT * FROM SFLIGHT INTO TABLE IT_SFLIGHT.
MAKE THE FIELDCATALOG TABLE FOR SFLIGHT
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME =
I_STRUCTURE_NAME = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME =
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = IT_FCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
GET THE LIST OF EVENTS IN EVENT INTERNAL TABLE
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = IT_EVENTS
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
GET THE NAME OF EVENT (TOP-OF-LIST) FROM LIST OF EVENTS IN EVENT TABLE
READ TABLE IT_EVENTS
WITH KEY NAME = SLIS_EV_TOP_OF_LIST
INTO WA_EVENTS.
IF READ OPERATION SUCCESSFUL
MOVE NAME OF LIST HEADER INTO WORK AREA OF EVENTS
AND APPEND THAT WORK AREA TO EVENTS TABLE THAT CONTAINS LIST OF
EVENTS
IF SY-SUBRC = 0.
MOVE FORMNAME TO WA_EVENTS-FORM.
APPEND WA_EVENTS TO IT_EVENTS.
ENDIF.
SPECIFY ONE ACTON ON EVENT IN WORK AREA AND APPEND THAT ACTION TO
TABLE OF ACTION
WA_ACTION-TYP = 'H'.
WA_ACTION-INFO = TEXT-001.
APPEND WA_ACTION TO IT_ACTION.
CLEAR WA_ACTION.
WA_ACTION-TYP = 'S'.
WA_ACTION-KEY = TEXT-002.
WA_ACTION-INFO = TEXT-003.
APPEND WA_ACTION TO IT_ACTION.
CALL THE SUBROUTINE TO DISPLAY THE LIST
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT =
IT_FIELDCAT = IT_FCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = IT_EVENTS
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_SFLIGHT
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FUNCTION MODULE THAT WILL BE CALLED AUTOMATICALLY WHEN THE
TOP-OF-LIST EVENT IS TRIGGERED.
FORM TOP_OF_LIST.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_ACTION
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
Regards
Abhii..
Edited by: Abhii on Nov 10, 2009 1:00 PM
Maybe you are looking for
-
File transfer from MacBook Pro into external hard drive
I can't copy files from the MacBook into an external hard drive. In the 'Get Info' section, it says read-only. However, the hard drive have just been recently bought. I had the same problem with our previous hard drive. Although the previous hard dri
-
Credit card instead of redeem card
I downloaded Final Cut Pro X and wanted to use a redeem code, but it used my credit instead. How do I fix this? Thanks for anyone's help!
-
ACSM files cause Adobe Digital Editions to crash
So, I've been reading these forums trying to find an answer, but I haven't read about someone with the same problem. (If you know of a discussion where a solution was already posted, please link me if possible.) So, I decided to post this issue and s
-
I am using a fixed position etext template for ACH. I need to add a line at the top called the security record that needs to in the following exact format: ADD ID=BHGUSRF1 BID='NWFACH99999999' (with the 9's representing the bank id) However it errors
-
Error with "Open/Create/Replace File" function with cancel button
I've attached a very simple VI that embodies what I want to do with my Open File function. I simply want to stop the rest of my program (theoretically encased in the Case Structure) from running if the user deigns not to specify a file location. Howe