Meaning of LineType field in JDT1 table
Hi,
Does anyone know the meaning of the LineType field in JDT1 table?
Hi,
I don't know the meaning of Line type.But all invoices posted with line type 3. The default value is zero.
Thanks.
Similar Messages
-
What is the meaning of MAIN_OBJECT field in table CRMD_SRV_REFOBJ
Hi,
Please help me in understanding the meaning of MAIN_OBJECT field in table CRMD_SRV_REFOBJ
Thanks
Sudhansu-1 represent value that is not assign in SAP.
Basically 1 is for manager...but when u create Database at that time it take as NOT initialized user.
Thanks
Kevin -
Meaning of field upgrade in table smodilog
Hi all ,
Do you know what is the meaning of field UPGRADE in table smodilog ?
the thing is that after upgrade of our test system , by using spau cr (that was imported during the upgrade in phase adjust_prp)
when I goto SPAU I see that the objects that appear there got the right version , but they are not adjusted .
If I delete the value from filed UPGRADE in table smodilog fo r one of these objects , The object is set to adjusted in SPAU.
Any ideas ,
Regards ,
OrenHi
The field SATZA means RECORD TYPE for confirmation & it gets updated when RECORD TYPES are copied from table TEVEN to AFRU.
Check the SAP standard report CORUSART.
Hope this helps.
Regards
Abhii -
Abbreviation of ST in the field origin of table JDT1
Dear Experts/Gurus,
I have a problem relate to define the abbreviation of ST in the field origin of table JDT1. it is not only ST and also other terms in the field. I have tried to find it out using ppt and help file but fail. where do I have to see it ? do you have ppt or pdf file explained about it ? I appreciate your answer so much. TIA
Rgds,Hi steve andre
The origin field is on OJDT and not JDT1. The field TransId on the table ojdt tells you which document it came from. But this field is numeric. So for example if the journal came from a Sales Invoice it will have 13. These numbers repreasent the actual DI API object also.
Here is a table of the values.
oChartOfAccounts ChartOfAccounts object. 1
oBusinessPartners BusinessPartners object. 2
oBanks Banks Object. 3
oItems Items object. 4
oVatGroups VatGroups Object. 5
oPriceLists PriceLists object. 6
oSpecialPrices SpecialPrices object. 7
oItemProperties ItemProperties 8
oUsers Users object. 12
oInvoices Documents object that represents a draft of sales invoice document. 13
oCreditNotes Documents object that represents a draft of sales credit note document. 14
oDeliveryNotes Documents object that represents a draft of sales delivery note document. 15
oReturns Documents object that represents a draft of sales return document. 16
oOrders Documents object that represents a draft of sales order document. 17
oPurchaseInvoices Documents object that represents a draft of purchase invoice document. 18
oPurchaseCreditNotes Documents object that represents a draft of purchase credit note document. 19
oPurchaseDeliveryNotes Documents object that represents a draft of purchase delivery note document. 20
oPurchaseReturns Documents object that represents a draft of a purchase return document. 21
oPurchaseOrders Documents object that represents a draft of purchase order document. 22
oQuotations Documents object that represents a draft of sales quotation document. 23
oIncomingPayments Payments object. 24
oJournalVouchers JournalVouchers object. 28
oJournalEntries JournalEntries object that represents a normal journal entry. 30
oStockTakings StockTaking object. 31
oContacts Contacts object. 33
oCreditCards CreditCards Object 36
oCurrencyCodes Currencies object. 37
oPaymentTermsTypes PaymentTermsTypes object. 40
oBankPages BankPages object. 42
oManufacturers Manufacturers 43
oVendorPayments Payments object that represents payments to vendors. 46
oLandedCostsCodes LandedCostsCodes 48
oShippingTypes ShippingTypes 49
oLengthMeasures LengthMeasures 50
oWeightMeasures WeightMeasures 51
oItemGroups ItemGroups object. 52
oSalesPersons SalesPersons 53
oCustomsGroups CustomsGroups 56
oChecksforPayment ChecksforPayment object. 57
oInventoryGenEntry Documents object that is used to enter general items to the inventory. 59
oInventoryGenExit Documents object that is used to exit general items from inventory. 60
oWarehouses Warehouses object. 64
oCommissionGroups CommissionGroups 65
oProductTrees ProductTrees object. 66
oStockTransfer StockTransfer object. 67
oWorkOrders WorkOrders object. 68
oCreditPaymentMethods CreditPaymentMethods 70
oCreditCardPayments CreditCardPayments 71
oAlternateCatNum AlternateCatNum object. 73
oBudget Budget object. 77
oBudgetDistribution BudgetDistribution object. 78
oMessages Messages object. 81
oBudgetScenarios BudgetScenarios object. 91
oSalesOpportunities SalesOpportunities object. 97
oUserDefaultGroups UserDefaultGroups 93
oSalesStages SalesStages 101
oActivityTypes ActivityTypes object. 103
oActivityLocations ActivityLocations object. 104
oDrafts Documents object that represents a draft document (see Creating a draft document sample). 112
oDeductionTaxHierarchies DeductionTaxHierarchies object. 116
oDeductionTaxGroups DeductionTaxGroups object. 117
oAdditionalExpenses AdditionalExpenses object. 125
oSalesTaxAuthorities SalesTaxAuthorities object. 126
oSalesTaxAuthoritiesTypes SalesTaxAuthoritiesTypes object. 127
oSalesTaxCodes SalesTaxCodes object. 128
oQueryCategories QueryCategories object. 134
oFactoringIndicators object. FactoringIndicators 138
oPaymentsDrafts Payments object. 140
oAccountSegmentations AccountSegmentations object. 142
oAccountSegmentationCategories AccountSegmentationCategories object. 143
oWarehouseLocations WarehouseLocations object. 144
oForms1099 Forms1099 object. 145
oInventoryCycles InventoryCycles object. 146
oWizardPaymentMethods WizardPaymentMethods object. 147
oBPPriorities BPPriorities object. 150
oDunningLetters DunningLetters object. 151
oUserFields UserFieldsMD object. 152
oUserTables UserTablesMD object. 153
oPickLists PickLists object. 156
oPaymentRunExport PaymentRunExport object. 158
oUserQueries UserQueries object. 160
oMaterialRevaluation MaterialRevaluation object. 162
oCorrectionPurchaseInvoice Documents object that represents a draft of purchase invoice correction document. 163
oCorrectionPurchaseInvoiceReversal Documents object that represents a draft of reverse purchase invoice correction document. 164
oCorrectionInvoice Documents object that represents a draft of correction invoice document. 165
oCorrectionInvoiceReversal Documents object that represents a draft of reverse invoice correction document. 166
oContractTemplates ContractTemplates object. 170
oEmployeesInfo EmployeesInfo object. 171
oCustomerEquipmentCards CustomerEquipmentCards object. 176
oWithholdingTaxCodes WithholdingTaxCodes object. 178
oBillOfExchangeTransactions BillOfExchangeTransaction object. 182
oKnowledgeBaseSolutions KnowledgeBaseSolutions object. 189
oServiceContracts ServiceContracts object. 190
oServiceCalls ServiceCalls object. 191
oUserKeys UserKeysMD object. 193
oQueue Queue object. 194
oSalesForecast SalesForecast object. 198
oTerritories Territories object. 200
oIndustries Industries object. 201
oProductionOrders ProductionOrders object. 202
oPackagesTypes PackagesTypes object. 205
oUserObjectsMD UserObjectsMD object. 206
oTeams Teams object. 211
oRelationships Relationships object. 212
oUserPermissionTree UserPermissionTree object. 214
oActivityStatus ActivityStatus object. 217
oChooseFromList ChooseFromList object. 218
oFormattedSearches FormattedSearches object. 219
oAttachments2 Attachments2 object. 221
oUserLanguages UserLanguages object. 223
oMultiLanguageTranslations MultiLanguageTranslations object. 224
oDynamicSystemStrings DynamicSystemStrings object. 229
oHouseBankAccounts HouseBankAccounts object. 231
oBusinessPlaces BusinessPlaces object. 247
oLocalEra LocalEra object. 250
oSalesTaxInvoice Sales tax invoice. See TaxInvoices object and DocType property with the valid value botit_Invoice. 280
oPurchaseTaxInvoice Purchase tax invoice. See TaxInvoices object and DocType property with the valid value botit_Payment. 281
BoRecordset Recordset object. 300
BoBridge SBObob object. 305
oNotaFiscalUsage NotaFiscalUsage object. 260
oNotaFiscalCFOP NotaFiscalCFOP object. 258
oNotaFiscalCST NotaFiscalCST object. 259
oClosingDateProcedure ClosingDateProcedure object. 261
oBusinessPartnerGroups object. 10
oBPFiscalRegistryID BPFiscalRegistryID object. 278
Hope this helps -
How to deactivate the fields in a table control of a standard screen
Hi,
I have an requirement to deactivate the fields in a table control of a standard screen in ME22n transaction.I am using a BADI "ME_PROCESS_PO" and in item mathod i am looping at screen for the screen field name in the table control.But it is not working. Can anyone give me the possible solution . Thanx in advance.
With Regards,
Ajit.>
Vivek Joshi wrote:
> Hello Router ,
> I do not want to set the focus , I want to get focus . User can click on any cell in the table and then press a button in the toolbar . Now in the event handler of the button i want to under which column User has set the focus .
> I hope , I am clear now .
> Thanks for your help
> Regards
> Vivek
An yet you keep getting suggestions of how to set the focus. I looked through the API documentation and I don't see anything that would suggest you can request to see where the current focus is. Perhaps someone might still come along with a solution, but my hopes wouldn't be too high at this point. I can pass the requirement onto Product Definition, as the use case does seem interesting. Perhaps it is something we have even considered in the past.
But for now, there might be a better way to solve your problem. It will probably mean redesign the interaction. What exactly are your requirements? Do you need to be able to get the data in a particular cell of table when a button is clicked? Just throwing out some ideas here, but maybe just use the lead selection to select the row, but then have a button choice to choose the action associated with the column you want. A hack for sure - but it might work. Also it doesn't help you right now, but in the near future update to NetWeaver 7.0, WDA does have a onColSelect event for the table. -
Changing the length of a key field in a table
Hi,
I want to increase the length of the field from 2 to 4 in a standard SAP table and deliver it to the customers. This field is a key field in table. This field from this table is also used in view and view clusters.
What is the implication of changing the length to the customers. The customers would have already data in this field and they should not loose any data. Will the existing data for customers remain at length 2 or do they have to do some conversion?
Regards,
Srini.
Edited by: Srinivasa Raghavachar on Feb 7, 2008 12:45 PMhi,
The database table can be adjusted to the changed definition in the ABAP Dictionary in three different
ways:
By deleting the database table and creating it again. The table on the database is deleted, the inactive
table is activated in the ABAP Dictionary, and the table is created again on the database. Data
existing in the table is lost.
By changing the database catalog (ALTER TABLE). The definition of the table on the database is
simply changed. Existing data is retained. However, indexes on the table might have to be built again.
By converting the table. This is the most time-consuming way to adjust a structure.
If the table does not contain any data, it is deleted in the database and created again with its new
structure. If data exists in the table, there is an attempt to adjust the structure with ALTER TABLE. If the
database system used is not able to do so, the structure is adjusted by converting the table.
Field 1 Field 2, Field 3
NUMC,6 CHAR 8 CHAR, 60
Field 1 Field 2 Field 3
NUMC,6 CHAR, 8 CHAR,30
The following example shows the steps necessary during conversion.
Starting situation: Table TAB was changed in the ABAP Dictionary. The length of field 3 was reduced
from 60 to 30 places.
The ABAP Dictionary therefore has an active (field 3 has a length of 60 places) and an inactive (field 3
still has 30 places) version of the table.
The active version of the table was created in the database, which means that field 3 currently has 60
places in the database. A secondary index with the ID A11, which was also created in the database, is
defined for the table in the ABAP Dictionary.
The table already contains data.
Step 1: The table is locked against further structure changes. If the conversion terminates due to an
error, the table remains locked. This lock mechanism prevents further structure changes from being
made before the conversion has been completed correctly. Data could be lost in such a case.
Step 2: The table in the database is renamed. All the indexes on the table are deleted. The name of the
new (temporary) table is defined by the prefix QCM and the table name. The name of the temporary
Step 3: The inactive version of the table is activated in the ABAP Dictionary. The table is created on the
database with its new structure and with the primary index. The structure of the database table is the
same as the structure in the ABAP Dictinary after this step. The database table, however, does not
contain any data.
The system also tries to set a database lock for the table being converted. If the lock is set, application
programs cannot write to the table during the conversion.
The conversion is continued, however, even if the database lock cannot be set. In such a case
application programs can write to the table. Since in such a case not all of the data might have been
loaded back into the table, the table data might be inconsistent.
You should therefore always make sure that no applications access the table being converted
during the conversion process.
Step 4: The data is loaded back from the temporary table (QCM table) to the new table (with MOVECORRESPONDING).
The data exists in the database table and in the temporary table after this step.
When you reduce the size of fields, for example, the extra places are truncated when you reload the
data.
Since the data exists in both the original table and temporary table during the conversion, the storage
requirements increase during the process. You should therefore verify that sufficient space is available in
the corresponding tablespace before converting large tables.
There is a database commit after 16 MB when you copy the data from the QCM table to the original
table. A conversion process therefore needs 16 MB resources in the rollback segment. The existing
database lock is released with the Commit and then requested again before the next data area to be
converted is edited.
When you reduce the size of keys, only one record can be reloaded if there are several records whose
key cannot be distinguished. It is not possible to say which record this will be. In such a case you should
clean up the data of the table before converting.
Step 5: The secondary indexes defined in the ABAP Dictionary for the table are created again.
Step 6: The temporary table (QCM table) is deleted.
Step 7: The lock set at the beginning of the conversion is deleted.
If the conversion terminates, the table remains locked and a restart log is written.
Caution: The data of a table is not consistent during conversion. Programs therefore should not access
the table during conversion. Otherwise a program could for example use incorrect data when reading the
table since not all the records were copied back from the temporary table. Conversions therefore
should not run during production! You must at least deactivate all the applications that use tables to
be converted.
You must clean up terminated conversions. Programs that access the table might otherwise run
incorrectly. In this case you must find out why the conversion terminated (for example overflow of the
corresponding tablespace) and correct it. Then continue the terminated conversion.
Since the data exists in both the original table and temporary table during conversion, the storage
requirements increase during conversion. If the tablespace overflows when you reload the data from the
temporary table, the conversion will terminate. In this case you must extend the tablespace and start the
conversion in the database utility again.
If you shorten the key of a table (for example when you remove or shorten the field length of key fields),
you cannot distinguish between the new keys of existing records of the table. When you reload the data
from the temporary table, only one of these records can be loaded back into the table. It is not possible
to say which record this will be. If you want to copy certain records, you have to clean up the table
before the conversion.
During a conversion, the data is copied back to the database table from the temporary table with the
ABAP statement MOVE-CORRESPONDING. Therefore only those type changes that can be executed
with MOVE-CORRESPONDING are allowed. All other type changes cause the conversion to be
terminated when the data is loaded back into the original table. In this case you have to recreate the old
state prior to conversion. Using database tools, you have to delete the table, rename the QCM table to
its old name, reconstruct the runtime object (in the database utility), set the table structure in the
Dictionary back to its old state and then activate the table.
If a conversion terminates, the lock entry for the table set in the first step is retained. The table can no
longer be edited with the maintenance tools of the ABAP Dictionary (Transaction SE11).
A terminated conversion can be analyzed with the database utility (Transaction SE14) and then
resumed. The database utility provides an analysis tool with which you can find the cause of the error
and the current state of all the tables involved in the conversion.
You can usually find the precise reason for termination in the object log. If the object log does not
provide any information about the cause of the error, you have to analyze the syslog or the short dumps.
If there is a terminated conversion, two options are displayed as pushbuttons in the database utility:
After correcting the error, you can resume the conversion where it terminated with the Continue
adjustment option.
There is also the Unlock table option. This option only deletes the existing lock entry for the table .
You should never choose Unlock table for a terminated conversion if the data only exists in the
temporary table, i.e. if the conversion terminated in steps 3 or 4. table for table TAB is therefore QCMTAB.
Hope this is helpful,Do reward. -
Invalid value in OPTION field of value table for IN itab operator. operato
Hi,
I am working on SELECT-OPTIONS to accept single and multiple values for company code. I am using CREATE_RANGE_TABLE and ADD_SELECTION_FIELD and all is good but I was prompted with error "Invalid value in OPTION field of value table for IN itab operator. operator" when I enter 2 single value.
SIGN OPTION LOW HIGH
| |CN01| |
| |SG02| |
However, below combinations working good for me and I don't get the above error.
SIGN OPTION LOW HIGH
I |BT |CN01|CN02|
| |SG02| |
SIGN OPTION LOW HIGH
| |SG02| |
I am using below coding.
DATA:
ls_cmp_restrictions TYPE if_wd_select_options=>t_complex_restrictions,
ls_rsoptions TYPE rsoptions.
CLEAR ls_rsoptions.
ls_rsoptions-bt = abap_true.
ls_rsoptions-cp = abap_false.
ls_rsoptions-eq = abap_true. " for enable only single value*
ls_rsoptions-ge = abap_false.
ls_rsoptions-gt = abap_false.
ls_rsoptions-le = abap_false.
ls_rsoptions-lt = abap_false.
ls_rsoptions-nb = abap_false.
ls_rsoptions-ne = abap_false.
ls_rsoptions-np = abap_false.
ls_cmp_restrictions-m_exclude = ls_rsoptions.
CLEAR ls_rsoptions .
ls_rsoptions-bt = abap_true.
ls_rsoptions-cp = abap_false.
ls_rsoptions-eq = abap_true. " for enable only single value*
ls_rsoptions-ge = abap_false.
ls_rsoptions-gt = abap_false.
ls_rsoptions-le = abap_false.
ls_rsoptions-lt = abap_false.
ls_rsoptions-nb = abap_false.
ls_rsoptions-ne = abap_false.
ls_rsoptions-np = abap_false.
ls_cmp_restrictions-m_include = ls_rsoptions.
* Create a reference to range table
lr_field = wd_this->m_helper->create_range_table( `BUKRS` ).
* Add the select-option to the group
wd_this->m_helper->add_selection_field(
i_id = `BUKRS`
i_value_help_structure = 'P0001'
i_value_help_structure_field = 'BUKRS'
it_result = lr_field
i_no_intervals = abap_true
i_no_extension = abap_false
i_complex_restrictions = ls_cmp_restrictions
i_use_complex_restriction = abap_true ).
FREE lr_field.
Edited by: Girish Nabar on Jul 22, 2011 12:35 PMHi Girish,
People are answering not for points, just to share the knowledge.
And I think the way of structure is wrong. i think we cannot pass two single values in your way. am not sure about .
low means it will accept single value. for one record in sign structure.
wait for other replys.
Regards
Srinivas -
Custom field in BP_PDBGP table not getting updated
Hi,
i am working in Contract management in SRM 7.0 Pack 6. I have aadded a custom field in partner table which appears in the partner table of contract header. It is a checkbox. when i check it the value gets saved in BBPPDBGP table for the first time after that if i try to uncheck it the value is not getting updated. I checked in the BBP_DOC_CHANGE_BADI, the value which is getting passed is correct but it doesn't update the databse accordingly.
Any suggestions? is this a standard bug?
NehaHi Virendra,
Thanks a lot for your suggestion.
Where should i check? If the data passing to BBP_DOC_CHANGE_BADI is correct then that means at the webdynpro side there should not be any problem and as per the standard after doc_change also it should save properly. i also checked the badi there is not dependent coding done over there. DOC_SAVE badi is also inactive for contract business object. Hence, i am not getting any clue where could be the problem.
Let me know if you want more details inorder to analyse this problem.
Thanks &Regards,
Neha -
How to move field symbol internal table to internal table with header line?
Dear all,
hi...hereby i would like to ask how i can move field symbol internal table to a internal table?
as i know field symbol internal table is without header line..
so, may i know how to do this....to move field symbol internal table to internal table which consist of header line and field and record will same as field symbol internal table...in additional, my field symbol internal table is dynamic table mean everytime will have flexible columns..?
Please advise...
Thanks
Regard,
ToToRo.
Edited by: @ToToRo@ on Aug 20, 2009 6:16 AMHello,
Try this way:
If both the type of internal tables are same then you can directly assign dynamic internal table to static internal table.
itab = <itab>.
Suppose you have field symbol internal table <itab> which is different in structure from ITAB.
Now, you can create <wa> as follow:
FIELD-SYMBOLS <wa>.
DATA wa TYPE REF TO DATA.
CREATE DATA wa TYPE LINE OF <itab>.
ASSIGN wa->* to <wa>.
This way your work area is read.
Using [ASSIGN COMPONENT|http://help.sap.com/saphelp_nw04/helpdata/EN/fc/eb3923358411d1829f0000e829fbfe/content.htm] syntax you can read required component of <wa>.
Finally you can use that value to load static internal table.
You can also refer to my thread on [Dynamic table|Re: Creating Dynamic table].
Hope this helps!
Thanks,
Augustin.
Edited by: Augustarian on Aug 20, 2009 10:06 AM -
Adding new field in customized table ZPM_QMEL_EXT
Hi all,
My requirement is to add a new field in ZPM_QMEL_EXT table numeric field no of months due (ZZ_CO_MON_DUE) .
Its value will be calculated as the # of invoices that were paid vs. what has not been paid and then from there, value of this field will be fetched.It has to be populated during the time of notifcation screen entry (iw51). The logic will be similar to this
SELECT FAEDN FROM DFKKOP INTO TABLE IT_DU_DT
WHERE GPART EQ WA_QMEL-KUNUM AND
VKONT EQ WA_QMEL-ZZ_VKONT.
SORT IT_DU_DT BY FAEDN ASCENDING.
READ TABLE IT_DU_DT INTO WA_DU_DT INDEX 1.
MOVE WA_DU_DT-FAEDN TO DUE_DT.
CALL FUNCTION 'HR_MONTHS_BETWEEN_TWO_DATES'
EXPORTING
I_DATUM_BIS = SY-DATUM
I_DATUM_VON = DUE_DT
IMPORTING
E_MONATE = NO_MT.
IF NO_MT IN P_DU_MT.
WA_QMEL-DUE_MONTHS = NO_MT.
Awaiting your kind help .
Thanks
hariom.Hi,
There is only one option to include extra field for standard tables that is Append Structure other than we don't have any option.
For Customizing tables we can use Append structure as well as Include Structure.
Rules: Append Structure should be in last in Field column but include structure you can insert in any where it means between the fields.
Delivery class option and data class will take care automatically while upgrading the sap system one version to Another version.(upgrading).
For that you should maintain the those properties when data base table creation.
i hope the above information may helpful to you.
Best Regards
Sreenivas Pachva -
Account Balance - LineMemo Field on JDT1
Hello SDN Community,
On the Account Balance for each BP the details field brings de invoice and sales order document numbers.
How does this field LineMemo on Table JDT1 is written by the system?
When an invoice was made directly without a sales order, this field is empty, and i need to reflect the invoice number.
Thank you.
Regards,
GuillermoL.-Hi Guillermo
In B1UP there is a module called Toolbox and within that there is an option called Journal Remark system. This gives you the option to define a template on how the remark should be constructed - example <docnum> - <cardcode> - <date>
everytime you then add a document this themplate will be used for the journal remark
You can learn more about this feature here: http://service.boyum-it.com/education/b1-usability-package/e-learning/toolbox/#c6693
And you can try a 20 day demo here: http://license.boyum-it.com/b1up -
Field OBJNRZ in Tables FMIFIIT and FMIOI
Hi all,
I need fill the field OBJNRZ in tables Tables FMIFIIT and FMIOI but I dont know if the User exit EXIT_SAPLFMRI_001 and EXIT_SAPLFMRI_001 need abap code for to be filled (OBJNRZ) or only is needed activate this user exit.
Regards,
AlbertoHi Rob,
At that point the accounting records of FM documents in our system are carried out in the table FMIFIIT if what you mean.
what is meant is that the OBJNRZ object field can be filled through the application as you say with the values of Cost Center, Order of CO (Element Maintenance or PEP).
Greetings
alberto -
Delete L.H.S spaces from field in database table but not for Report
Dear Experts
I m facing a problem...actaually i have replaced 999 by blank in a field of database table record.
Like : 999 abcde
999999 hjklmn
9999 klplmj
99999 hjsfhh
I have replaced 9 by blank. and using CONDENSE statement i have avoid the left hand side spaces of 9 in the database table.
Means the data is updated in database table following below using Condense.
Like: abcde
hjklmn
klplmj
hjsfhh
Now, the problem is that these spaces is showing in the Report. The left hand side spaces is not deleting from the Report. But these spaces is not showing in the databse table.
Plz tell me wat is the reason and wat is the solution to avoid these space from the Report.
Note: That field is Character Field. KNA1-STRAS
Thanks and Regards,
SwapnikaHello
Try to use
SHIFT c LEFT DELETING LEADING SPACE.
instead of
CONDENSE... -
Update Yes/No field in access table through oracle procedure
Hi,
How to update Yes/No field in access table through oracle procedure. all other fields like AutoNumber, Text I can update it. Yes/No field how to update? Please, any one can help me?
Thanks and Regards,
Sudha.Sudha Teki wrote:
select "fldPost" from tblPHd@ODBCLNKNot quite sure what you mean, but the way you select the column would indicate a case sensitive column name
Look at this example
SQL> create table t
2 ("this" varchar2(10))
3 /
Table created.
SQL> insert into t values ('hello')
2 /
1 row created.
SQL> select *
2 from t
3 /
this
hello
SQL> select this
2 from t
3 /
select this
ERROR at line 1:
ORA-00904: "THIS": invalid identifier
SQL> select "this"
2 from t
3 /
this
helloIs your column name also case sensitive? -
Adding a Button for a field in a table
Hi there,
I don't know if it is possible, but I can't find any information of this. How can I make a field in a table searchable? That means I want to include a button besides this field in the table, so that user can click on the button to search for, eg to search for Material Number, using this button.
Anyone can help?No that is wrong. What I want to do is as follows:
In a table, there is a button in the field where user can click on to activate the OVS. When they click this button, OVS will open up a screen with the search citerias and the results in the table in the OVS (This is auto generated window and I can't modify directly onto the window).
What is happening now is when I click on the button to activate the OVS, what came out is just the fields.. the labels are all gone.
I tried to create Simple Type but it seems I do not know the correct way to use it so that the fields for OVS can be displayed with the labels. I tried many ways but the labels just don't show up.
You proposed that I do a Simple Type Binding but the problem is the window is automated, I can do binding onto the generated window.
What else can I try? I read all the tutorials and wiki, it seems that all the labels are generated so beautifully and automatically.. but mine is empty..!!
From what I analysed, in the OVS windows, the number of citeria fields generated are based on the number of fields input for the model and the number of result column is based on the number of fields in the model output. But there is just no Label.
PS: My data is bound to the backend using Adaptive Webservices, therefore I am using the model to search for the data.
Any help or advise is greatly appreciated!
Edited by: Jackson Yap on Feb 25, 2009 10:28 AM
Maybe you are looking for
-
ERROR CODE in CREATING JOB SCHEDULER
Please, I'm having an issue with the below code, does someone can figure out what is not going on? BEGIN DBMS_SCHEDULER.CREATE_JOB JOB_NAME => 'GATHER_DEV_TABLES_STATISTICS', JOB_TYPE => 'STORED_PROCEDURE', JOB_ACTION => 'DBMS_STATS.GATHER_SCHEMA_STA
-
it displays a message that says "the server encountered an error processing registration"
-
Catch 22 on a defective router
My Linksys E4200v2 router died (no blinking lights when a network cable is attached). I bought the router in Jan. the Hard ware warrenty is good for another 170 days but CISCO technical support says they can not help me since the 90 days technical su
-
Unable to open bookmarks in Adobe Reader 11 that were made in Adobe 10
We are unable to open bookmarks in Adobe Reader 11 that were made in Adobe 10. The OS is Windows 7. Thanks for your help!
-
we are using same laptop with my wife for our 2 iphones and when sincronizing, she's getting my apps and is requested for my apple id and password when getting a new app on her device. How can i fix that issue?