Measuring point reading conversion from FLTP to Decimal

Hi Friends,
I want to create view for measuring document (Plant Maintenance). In view I want to select following fields.
Counter Reading
Measurement Reading/Total Counter Reading
Counter Reading Difference
All above columns have data type FLTP where as I want to convert it into decimal and want to show using view.
Kindly suggest...
Pankaj

CALL FUNCTION 'MURC_ROUND_FLOAT_TO_PACKED'
EXPORTING
IF_FLOAT = v_values_tc-atflv
IF_SIGNIFICANT_PLACES = 15
IMPORTING
EF_PACKED = numerico
* EXCEPTIONS
* OVERFLOW = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE numerico TO v_atwrt_tc.

Similar Messages

Table for Measuring point Reading.

Dear Experts,
Please guide where can I find the database table for measuring point reading values namely READC which is a part of RIMR0 structure, for using in developemts.
Regards
Jogeswara Rao

hi
check in IMRG table, you can find the values in SI unit . convert the same using Functional module. consult with your technical team
regards
thyagarajan

Conversion from Binary to decimal - Need help

Hi guys,
I am new here and learnt some very basic Java before. I have a program that is in C++(to convert a binary number to decimal) that I found in the internet that interest me a lot. I am thinking whether this can be re-write in Java. I have tried to searh for solution but to no avail. I am wondering whether you guys can suggest a solution to this. Below are the source code in C++ :
#include <iostream.h>
#include <stdlib.h>
int main()
// part 1 : declaration
int Bin, Dec, TempBin;
int div;
char valid, again;
do {
// part 2 : Repeat asking the value of the binary number
Bin = TempBin = 0;
do {
cout << "Please input a binary number (1 to 10 bits) : ";
cin >> Bin;
TempBin = Bin;
do {
if ((TempBin % 10)==0 || (TempBin % 10)==1) // Note (1)
valid='Y';
else {
cout << "Invalid pattern! use 0's and 1's only\n\n";
valid='N';
break;
TempBin = (TempBin/10);
} while (TempBin>0);
} while (valid=='N');
// part 3 : Convertion
div = 1;
Dec = 0;
TempBin = Bin;
do {
Dec += (TempBin % 10)*div; // Note (2)
div *= 2;
TempBin = (TempBin/10);
} while (TempBin>0);
cout << "\nThe binary pattern " << Bin << " is equal to "
<< Dec << " in decimal pattern.\n" << endl;
// part 4 : try another number ?
cout << "\aTry another number (Y/N) : ";
cin >> again;
cout << "\n";
} while (again=='Y' || again=='y');
cout << "\n" << endl;
system("PAUSE");
return 0;
Appreciate your help. Thank you.
CK

So for Java, in your example, it takes a Java
String like "1001" and converts it to an int whose
value is one thousand and one. Can suggest a code for
this that takes user input str and convert to bin int.
I read books and noticed they are various ways to do
that. I am quite confused actually. It is like there
is no fix way to do that, unlike C++ which is more
easier to understand(in my opinion). Probably, because
I knew C better than Java.
The 'standard' way to take a String and convert it to an int...
int TempBin=Integer.parseInt(your_string);
You seem to be saying that you do not want to use the standard method, so you should not complain that there is no standard method. Here's some code that re-uses most of your modulo 10.
import java.io.*;
public class Test {
     public static void main(String []args) throws IOException {
          BufferedReader bf=new BufferedReader(new InputStreamReader(System.in));
          String result=null;
          while(true) {
               String input=bf.readLine().trim();
               try {
                    long v=Long.parseLong(input);
                    result=toBin(v);
                    System.out.println(result);
               } catch(NumberFormatException e) {
                         System.out.println("Only enter 1 or 0, nothing else!");
               System.out.println();
     public static String toBin(long btemp) {
          long temp=btemp;
          do {
               if ((temp % 10)!=0 && (temp % 10)!=1) {
                    System.out.println("Invalid pattern! use 0's and 1's only\n\n");
                    return null;
               temp = (temp/10);
          } while (temp>0);
          // part 3 : Convertion
          int div = 1;
          int Dec = 0;
          long TempBin = btemp;
          do {
               Dec += (TempBin % 10)*div; // Note (2)
               div *= 2;
               TempBin = (TempBin/10);
          } while (TempBin>0);
          return ""+Dec;

Reg : conversion from BigDecimal to Decimal

Hi All,
I have a BigDecimal value in my application . I want to change it to decimal value. What is the method to be used and what is the procedure?
Thanks in advance.

Hi Bharath,
I think You want to convert BigDecimal to a double valueI (Since No 'Decimal'   type is there in java)
Trythe method,
public double bigDecimalToDouble( java.math.BigDecimal bigDecimalVal )
    //@@begin bigDecimalToDouble()
    double val1=Double.parseDouble(""+bigDecimalVal);
    return val1;
    //@@end
let me know whether oit is useful for you.
thanks
Smitha

How to make Measuring Point Description Field scrollable on the Detail Read Screen

In the Measuring Point Read Detail Screen (Rounds Manager), the description field does not have a scroll bar like it does on the Point Read Counter Detail Screen. This means that the end-user has to arrow-over to the right on the handheld device to see the entire description. We changed the transaction property to be the same as that on the measuring point field on the Counter screen but that did not resolve the issue. We are assuming that the field width is defined in columns but are not sure if columns is the same as pixels. It seems like there is some type of behind the sceens calculation based on the number of pixels used by the characters in the description. The transaction property does have word wrap activated but it seems to make no difference. Does anyone have any suggestions on what can be done to make the measuring point description have a scrollbar and have the description wrap? The Rounds Server is version 2.3.
Tags edited by: Michael Appleby

1. wall of unformatted code. Use \ tags when posting code.
2. you're not even asking a question. You're just saying "it doesn't work" and then you dump the code. What do you expect? That people now go to debug it for you?

Measuring Point Counter Overflow reading

Dear Masters,
I want to know whether there is any standard method by which i can create a notification in the system whenever any measuring point reading reaches its counter overflow reading?
Can I do the same with the range valued measuring points? That if the measuring point reading is out of the range defined in a measuring point, it should create a notification
Thanks in advance for your valuable time and answers.

Hi,
Try any of these User Exits.
IMRC0001 MeasPoint/MeasDoc: Exit before update (after COMMIT WORK)
IMRC0003 MeasDoc: Menu exit for customer-specific function
To create the Notification, use the FM BAPI_ALM_NOTIF_CREATE.
[Check this link as well|BAPI needed for Notification & Work order;
Regards,
Maheswaran.

Measuring point update by production order confirmation

Hi friends,
I created a prt as equipment and assigned it to the routing. I created a production order and when i confirm the same i am getting following error as:
Document MeasUnit has a different dimension to the characteristic unit
Message no. IR071
Diagnosis
The measurement unit on creation of the measurement document must have the same dimension as the measurement unit of the characteristic of the measuring point.
In this case, the measurement unit % does not suit the character unit EA of the measuring point 103.
System Response
Processing will not be continued.
Procedure
Use the possible entries help.
Please suggest the solution.

Hello Sir(s)
i have gone through entire post for the subject related to measuring point auto update from production order confirmation. I have tried the same but i dont know what i am missing.
if i put some value like 1 or 2 and appropriate UOM then only my measuring document is being updated with the same value not with the actual confirmed quantity.. i have already maintained standard formulla in prt view.
my basic requirement is to get actual value of produced quanity as counter update. means if 20 pieces have been produced and confirmed in co11n, then counter must bhe updated with the value of confirmed quantity.
please advice what value should i put as usage in routing master to get actuall counter update.
Will Highly appreciate your quick reply.
Snapshots
Regards.
Mohammad.

Measuring points in maintenance planning

Hi,
Can we use measuring point(not a counter) for preventive maintenance planning. for example - i need to perform the operation when a color of oil is changed from yellow to black. is it possible through measuring point?. it is possible means please share that procedures.
Regards
sathish

Hi Satish,
Yes, it is possible to generate a maintenance notification if the measuring point reading is not as per standards or target value. You require a user exit IMRC0001 to IMRC0005. Also read documentation for these user exits in tcode SMOD.
Regards,
Vaibhav Mishra

Triggering of Preventive Maintenance based on Measuring Point

Hi,
I have set measuring point & defined upper range limit and lower range limit. Now I want to trigger preventive maintenance, based on reading enter against measuring point specifically if measuring point reading is above or below defined upper range limit or lower range limit.
Letu2019s say example, If 10 and 5 is upper range limit and lower range limit, now in this case creation of notification / main order if user has enter measuring point value more than 10 or less than 5.
Regards,
Dipen Shroff

Hi,
You can do it via Condition Based Maintenance ..
IMRC0001- U can use this User exit
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a7/fa4c988f6611d29e8a0000e8323350/frameset.htm
regards
pushpa

Fetch Measurement Point

Hi Experts,
I need to read measurement points asssigned to an order( it's functional location).
We tried RFC MEASUREM_DOCUM_READ_TO_ORDER but it returns measurement documents
(readings).
In Our requirenment, the order is newly created and no measurement documents exists.
we need to give all the measurement points (only) that exists against the order( it's functional location)..
Could you please help in this.
Please suggest any table/RFC.
Rohit

Hope this thread would be helpful,
[BAPI for measuring point;

Deletion of Measuring points from the Notification

Hi
I have created a notication and attched manully some measuring point. (Extras-->Measuing document, New Entries and added the measuing points). I want to delete the measuring points from the notification. It displayes the msg "1 MeasDocs cannot be deleted as they already exist in the database"
Note:The measuring points are not attached to the tech object.
Please let me know how can we delete this MP's or what alternative i need to follow.
The system msg display below:
HELP msg "
1 MeasDocs cannot be deleted as they already exist in the database
     Message no. IR 018
Diagnosis
     You are trying to delete measurement documents that the system has
     already written to the database.
System Response
     The system cannot perform the function.
     You can only delete measurement documents online at the creation stage.
     Once you have saved a measurement document, you can only delete it using
     a special reorganization program."
Thanks & regards,
Mujeeb

hi
For using archiving programme take help of basis help see firstly create programme on archiving object
PM_IMRG whcih is the object for measuring document then by ebtering this prepare the archving file run in test mode
then deletion of data with date wise reading in test mode follwed afterwards.
you have to confirm the data before the deletion
Regards
chandrashekhar

Issue with fixed point number output from 9219 module for full bridge measurement (cRIO/FPGA)

Hi,
I have a question regarding the fixed point output acquired from a 9219 module (in FPGA on a cRIO) when setup to acquire a strain measurement (full bridge).
Software: Labview 2009
Hardware: cRIO-9012 (NI-RIO 3.2.1), NI-9219 module
The 9219 module is configured in the project as follow:
Ch0: Full-Bridge +/- 7.8mV/V
Ch1: Voltage +/- 4V
Ch2: Voltage +/- 15V
Ch3: Voltage +/- 60V
The calibration mode is 'Calibrated' so the FPGA outputs fixed point numbers.
My issue is that the precision of the fixed point number for Ch0 (strain) is "(fixed point <+/-32,-1>[-2.5e1,2.5e1]:1.16e-10)", which indicates that the fixed point number is a value between +/- 0.25 and not the +7.8mV/V as I expected?
The fixed point number does not change in precision whether the range for the strain measurement is set at +/- 7.8mV/V or +/-64mV/V (the two available options).
As the fixed point number doesn't change precision I'm assuming that changing the range of the strain measurement changes the resolution of the acquired number? And as such I will need to perform additional scaling on the fixed point number to convert it to the expected range?
There is no mention of scaling of the voltage or strain measurements mentioned in any documentation or examples, with the only scaling example provided for the thermocouple measurements.
Any help/clarification is much appreciated.
Regards,
Mike

Hello Mike,
Hopefully I can help clarify some of the behavior you are seeing.
My issue is that the precision of the fixed point number for Ch0 (strain) is "(fixed point <+/-32,-1>[-2.5e1,2.5e1]:1.16e-10)", which indicates that the fixed point number is a value between +/- 0.25 and not the +7.8mV/V as I expected?
For calibrated values on the FPGA VI, the returned data is a Voltage measurement, not a directly calculated strain value. Based on the specified ranges for the 9219 in a Full bridge configuration, 250 mV will encompass all possible input values, at the module provided excitation (2-2.7V dependent on the sensor gage resistance).
The fixed point number does not change in precision whether the range for the strain measurement is set at +/- 7.8mV/V or +/-64mV/V (the two available options).
As you may notice from the fix-point definition, the fixed point data contains 32-bit precision which is larger than the acquired precision of 24-bits provided by the 9219. The fixed point data-type is coded to accept input encompassing both the range and precision of the instrument; such that, no additional coercion of the input data values is required based on user-defined software settings, i.e. the bridge sensitivities +/- 7.8mV/V or +/-64mV/V.
As the fixed point number doesn't change precision I'm assuming that changing the range of the strain measurement changes the resolution of the acquired number? And as such I will need to perform additional scaling on the fixed point number to convert it to the expected range?
The documentation does not clearly define that by varying the discrete levels of strain input (+/- 7.8mV/V or +/-64mV/V) the range of the ADC on the module is also adjusted. I am working to follow up further on this topic, to provide a clarification on the module documentation. As for scaling, the voltage values acquired regardless of the ADC resolution will still be related strain via the bridge sensitivity. The resolution of the ADC will simply define the smallest measurable change in the strain value.
There is no mention of scaling of the voltage or strain measurements mentioned in any documentation or examples, with the only scaling example provided for the thermocouple measurements.
For converting the acquired voltage values to a strain measurement, I would recommend the documentation linked here for a detailed explanation on strain calculation. Often, users will forward the acquired voltage data as fixed point values through a DMA FIFO to the RT controller on the Compact RIO; such that, they may handle conversion from voltage to strain using floating point math in real-time.
I hopes these responses provided a bit of clarity. I will continue to work to provide additional information on the 9219 specification information. Please post back any further questions.
Cheers!
Edit: Forgot to add the link.
Message Edited by Pcorcs on 04-14-2010 04:55 PM
Patrick Corcoran
Application Engineering Specialist | Control
National Instruments

I am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

i am facing problem while reading values from properties file ...i am getting null pointer exception earlier i was using jdeveloper10g now i am using 11g

hi TimoHahn,
i am getting following exception in JDeveloper(11g release 2) Studio Edition Version 11.1.2.4.0 but it works perfectly fine in JDeveloper 10.1.2.1.0
Root cause of ServletException.
java.lang.NullPointerException
at java.util.PropertyResourceBundle.handleGetObject(PropertyResourceBundle.java:136)
at java.util.ResourceBundle.getObject(ResourceBundle.java:368)
at java.util.ResourceBundle.getString(ResourceBundle.java:334)
at org.rbi.cefa.master.actionclass.UserAction.execute(UserAction.java:163)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

Copy Measuring Point from 1 FL to other FL

Hi,
I need to copy the Measuring Point( General Data, Counter Data & Classfication) from 1 Func Location to another Func Location.
Please suggest me...
regards,
Venkatesan Anandan

HI,
As suggest Pete, Plese go to IL01 and enter the referece functional location, then press enter
once you press enter pop will appear , where you select measuringpoint, class etc as required by you
then automatically data will transfer to new functionallocation which u creted.
regards
Krishna

Functional module to Copy measurement points from one equipment to another

HI,
Please give some body function module to Copy measurement points from one equipment to another which is not assign to functional location.

To Copy Measuring Points from one equipment to another , Go to transaction IE10 and copy all the relevant data that need to be copied Check the measuring point check box, it would copy the characteristic for measuring point to the newly created equipment and would create a system generated number for the measuring point. Both the measuring points would have the same characteristics and if they are attached to each other in a hierarchy then the measurement document readings could also be transferred from one measuring point to another.. You could use the following Function Module "EQUIPMENT_COPY" to copy the measuring point from one equipment to another if equipment has already been created.
Regards...
Edited by: Usman Kahoot on Jun 9, 2010 2:37 PM

Measuring point reading conversion from FLTP to Decimal

Similar Messages

Maybe you are looking for