Meeting Place 8.0 - Mute and Unmute Particular Participant

Hi,
I have setup of Meeting place 8.0 Application Server (Express Media Server) and Web Server 8.0
Problem is when Meeting Chairperson (host), who schedules a meeting, can't Mute/ unmute other attendees (Particular Ones) in same meeting (Act as a moderator).
Now, If we provide Attendant privilege to the host, we gets those rights to Mute and Unmute of that meeting As well As all the other meetings running(which is an problem).
Can we have a meeting Chairperson with Mute/ Unmute access (Particular Ones) for only meeting which has been hosted by him.
Please provide some valuable inputs on the same.
Thanks & Regards,
Ashish Bagla

Hi Ashish,
If you have MeetingPlace Audio only solution, from telephone user interface there is no possible way to mute individual participants. You, as a host, can mute only all participants, and then individual participants can unmute themselves if they want to say something.
The only other alternative is to use Conference Manager. However, to be able to use this tool, the user/host has to be either Attendant or System Administrator type of user.
More about Conference Manager you can find here:
1. How to install Conference Manager:
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Installing_MeetingPlace_Conference_Manager
2. How to use Conference Manager:
http://docwiki.cisco.com/wiki/Cisco_Unified_MeetingPlace_Release_8.0_--_Using_MeetingPlace_Conference_Manager
I hope this will help.
-Dejan

Similar Messages

Mute and unmute button is actionscript 3.0

Hi,
I am wondering how to make a mute and unmute button is actionscript 3.0. I did it before in actionscript 2.0 but not in 3.0.
Here is my actionscript 2.0 code.
var sound = 1;
var slashMC = _root.attachMovie("slash","slash01",99);
slash01._visible = false;
slashMC._y = btn._y;
slashMC._x = btn._x;
var s:Sound = new Sound();
s.attachSound("Gravy");
s.start(1,999);
btn.onPress = function(){
if(sound==1){
s.stop();
slash01._visible = true;
sound = 0;
else if(sound==0){
sound = 1;
slash01._visible = false;
s.start(1,999);
Thanks

Try this:
    import flash.display.MovieClip;
    import flash.events.*;
    import flash.media.*;
    import flash.net.URLRequest;
        var isPlaying:Boolean = false;
        var snd:Sound = new Sound();
        var channel:SoundChannel = new SoundChannel();
        var pos:Number = 0;
        var soundVolume:Number = 1;
            snd.load(new URLRequest("something.mp3"));
            btn_Stop.addEventListener(MouseEvent.CLICK, stopMusic);
            btn_Stop.buttonMode = true;
            btn_Play.addEventListener(MouseEvent.CLICK, playMusic);
            btn_Play.buttonMode = true;
         function stopMusic(evt:Event):void
            channel.stop();
            pos = 0;
            isPlaying = false;
         function playMusic(evt:Event):void
            if(!isPlaying)
                channel = snd.play(pos);
                btn_Play.visible = false;
                btn_Pause.visible = true;
                isPlaying = true;

How can I mute and unmute my Mic using the button ...

I have a button on my mic that is a play/pause button. It works fine when playing music on my phone. Can I use this button to mute and unmute my mic when using skype? The Volume up and down buttons already work. Thanks

That cable set up you have is probably not going to work. The iOS devices seem a little sensitive to having the right connector for the right job. I have the USB connector (and the HDMI one too) which is in 2 parts: mini USB link and SD. My older Nikon D70s does not use SD cards, so I use the cable. When connected any images on the card (in the camera) are displayed in the built-in Photo app in an Imports album. Just touch the Import button and all are brought in. I use RAW and have found that the RAW images are transferred to the computer (MacBook Pro + Aperture) when I get home. A comparison (I kept the images on the card and imported from that too) shows that the resolution/size is identical. As an additional note as you mentioned this, video clips work the same.
With all the connectors, I carry a small bag for the devices I work with.

NB205 Win 7 - Speaker Mute and Unmute

Hi everyone, thanks for this thread -- indeed, very helpful.
I have a different issue under Windows 7 -- I can never reliably mute or unmute the NB205. Even if I click the mute icon (after clicking the volume icon in the taskbar), sound still plays through the speaker. The speaker icon in the taskbar is also stuck on 'mute.'
Of course, I could just reduce and raise the volume as needed, but the permanent mute icon on the taskbar drives me nuts.
I'm hoping that a driver re-install fixes this. I had a feeling that it's my Windows installation, but I have another machine with the same version of windows that does not reproduce the issue.
Do any NB205/Win7 users have this problem? If not, can any Win7 users mute and unmute the netbook a few times to try and reproduce it? Thanks again!
[Admin - split from another thread, edited title]
Solved!
Go to Solution.

hi, this is the closest thread that i found to my problem, i recently got a virus on my nb205 and i got it removed but the problem is that now there is absolutely no sound at all.. even when i start it up theres no little start up tone i cant even listen to my music ..... i checked all the sound things, nothings on mute and... is there anything that i could download or do that could bring the sound back?

Not working mute and unmute buttons

var myGlobalSound:Sound = new Sound();
myGlobalSound.start(0, 99);
playB.visible=true;
stopB.visible=false;
volControl_mc.dragger_mc._y = 0;
volControl_mc.dragger_mc.onEnterFrame = function() {
        myGlobalSound.setVolume(0-this._x);
volControl_mc.dragger_mc.onPress = function() {
        startDrag(this, false, 0, this._y, 41, this._y);
volControl_mc.dragger_mc.onRelease = volControl_mc.dragger_mc.onReleaseOutside=function ()
        stopDrag();
stopB.onRelease = function() {
       myGlobalSound.stop();
        playB.visible=true;
        stopB.visible=false;
playB.onRelease = function() {
        myGlobalSound.start(0, 99);
        playB.visible=false;
        stopB.visible=true;
But not working mute and unmute buttons. ??????

you're using an flvplayback component? if yes, open the flash helpfiles and check the section on the flvplayback class.

Am using ipad air, my question is under accessibility mute and unmute button is not working.

pls help me am using ipad air, under accesibility the mute and unmute button are not working.

Do you mean that you have Settings > General > Use Side Switch To set to 'Mute', and you have the switch on the right-hand side of your iPad, above the volume control, 'on' ? WIth that 'on' notification sounds should be muted (e.g. email notifications, game sounds etc), but the you should still be able to hear the Videos and Music apps and with headphones. Is that not happening, and if not you've tried toggling the switch on the side of your iPad on/off ?
iPad side switch : http://support.apple.com/kb/HT4085

Win 8.1 Sound mutes and unmutes randomly

Over the past week or so I have experienced a problem with the audio on my HP Envy Touchsmart 15-j002ax Notebook
Randomly, my sound will mute/unmute itself, sometimes many times in a row. I'm using the built in Radeon HD Audio with the newest HP drivers (according to the HP Support website)
When the speakers mute or unmute an icon appears automatically in the top let hand side of the the screen and it displays the percentage of volume, the same as the speakers icon in the system tray. However the percentage is displayed in a black box icon and is not the normal speaker icon. The f6 key on my keyboard illuminates when the random mute occurs and disappears when the random unmute occurs. Depressing the f6 key when a mute occurs does nothing. However pressing the volume adjustment keys f7 or f8 unmutes the speakers. Also if I display the system tray speaker icon and click the mute symbol the sound is unmuted
However, the random muting and unmuting keeps occurring and I cannot control it or any length of time

Hello, @jgunner1948
It appears that you're having issues with the audio in your notebook, that it's being randomly muted and unmute. I will attempt to assist you.
Start with this document: No Sound from the Speakers (Windows 8). This may have steps that can help you.
If nothing there helps, go into Device Manger > sound, video and game controllers > right click on the audio driver(s) choose to uninstall (make sure to check the box to delete the driver).
Download these drivers: HP ENVY TouchSmart 15-j002ax Notebook PC Drivers (which you may have) and install. Restart your notebook.
If this fails to help, try a System Refresh.
Start with this, let me know how it goes for you.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Mute and unmute audio in video clips

Making an hour long movie. I only want the original movie sound on 2 or 3 clips - the rest my own music. In the past I did it by dragging the movie sound (in Box A) to bottom to mute it then raising it where I wanted it to be heard. However, this would be a royal pain in this case. Is there a way to uncheck the original movie sound where I want my own music, then check it where I want to hear it? I can't seem to do so without making it all heard or none. Can anyone help with a quick way of doing this? Thanks,
Max

Hi Max:
You can extract all of the original audio. It will show up on the second line of the timeline.
Click on one of the extracted audio clips and Edit >'select All". Use the volume slider to mute all of the clips to "0".
If they aren't already, you will need to split the audio where you want to hear it and go back to the volume slider and increase the volume there.
Man, I'm not a very good teacher-hope you understood that one!
Sue

Meeting Place Web Servers ( Internal and External )DNS and IP Addressing

For the Meetingplace 8.5 what will be the IP addresses of the Internal Web Server ( Internal IP's from the same subnet as of the CUCM) and for the External one interface from the internal network subnet ( CUCM subnet) and the other Public IP address?
How we will be mapping the DNS FQDN for these IP addresses?
Do we need to have one internal DNS server and the other place in the DMZ?

Hi Ali,
You need two Web Server one Internal and one External. While configuring you internal web server you also add external if external particpants are allowed or not.
For internal web server you want to make sure it's on the same subnet so internal particpants can access that one. For external you need to make sure the IP configured on external one is either natted ip or public ip so that when they type the external domain name it resolves to this external server ip address.
Let me know if you have more questions.
HTH
Arun

Meeting place , Webex Node Move to CWMS

Hi
The current setup is a meeting place version 8.x and webexnode version x.
We will move in UCS server with CWMS
CWMS: Cisco Webex Meeting Server
Do you have any useful links for this migration etc?
Please rate all useful posts
Regards
Chrysostomos
""Thinking is the hardest work there is , which is probably the reason why so few engage in it""

Hi,
You can visit the Planning guide for Cisco Webex Meeetings Server which says
Because of architectural differences,there is no migration path (for existing user accounts, customizations,
and meetings) from CiscoUnifiedMeetingPlace to Cisco WebExMeetings Server.These are two distinct
products.
http://www.cisco.com/en/US/docs/collaboration/CWMS/b_planningGuide.pdf
For more info, u can contact Csico SE/AM.
regds,
aman

Meeting Place 8.0 + Webex Node?

Hello to all,
We have purchased two IBM 7835 servers with the intention of building on as meeting place 8.0 (EMS) and one as a webex node,
The question I have is about the placement of the servers.
I have read the SRND and are still not sure where the webex node (collaboration) server is to be placed, the docs say this should typically be on the
inside network closest to participants
Also where is the best placement for the MP 8.0 server DMZ or Inside the nework,
I guess the collaborative model we are looking at is the
Cisco Unified MeetingPlace with Cisco WebEx Node for Cisco MCS
Any help or docs would be well appreciated.
Thanks
Rich

Hi all,
I encounter the same constraint, so I want to ask you :
We've deployed a Meeting place8.0.0.393 in LAN. Then a Webex Node for MCS will be added.
The concern is that Meeting place is deployed in that LAN, then the WebexNode will be installed there also (on premise).
Thus the DNS that will be used is like "myenterprise.local". ( mpapps1.myenterprise.local and wbxNode1.myenterprise.local)
Its not like .com or .org or any domain reachable from Intenet. the .local is not reachable from Internet.
So my question is : is it possible to use this domain.local in the place of the place of the FQDN of the webex node and Application Node fields?
Regards,
Antra

How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

Hi
I have Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate domain infrastructure.
Thanks in advance!!!
Sincerely yours
Sergey Bondarenko

Hi
Thanks for your attention for my humble problem.
I have performed Meeting Place Express configuration through the “net” command.
But now unfortunately I can't connect to meeting place through web browser. I just get blank page.
Though I can reach the server with help of ssh. I think my DNS works properly because I can resolve the ip address of cumpxvoice .uclab.com and cumpxweb. uclab.com with help of dig command.
Have you any idea?
A lot of thanks in advance!!
Sincerely yours Sergey Bondarenko
Here I have printed the net configuration output of Cisco meeting Place Express:
[root@cumpxvoice root]# net
This is the MeetingPlace Express network configuration utility.
Up to the point where you save changes, it is safe to hit ^C to get
out at any time, in which case nothing will have changed.
1) List current configuration
2) Configure Ethernet port 1
3) Configure Ethernet port 2
4) Configure service bindings
5) Set host names
6) Set domain name
7) Configure DNS service
8) Configure NTP service
9) Configure routing
10) Done
Select: 1
Primary/audio host name: cumpxvoice
HTTP host name:          cumpxvoice
RTMP host name:          cumpxweb
Domain name:             uclab.com
Service bindings:
Audio:                   port 1 (eth0)
Web browsing (HTTP):     port 1 (eth0)
Web conferencing (RTMP): port 2 (eth1)
Port 1 (device eth0):
IP Address:      10.62.60.116
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Port 2 (device eth1):
IP Address:      10.62.60.117
Network mask:    255.255.255.0
Default gateway: 10.62.60.1
Link setting:    autoneg on
Static routes:
Destination      Gateway          Network mask     Port
0.0.0.0          10.62.60.1       0.0.0.0          1
DNS Servers:
10.62.60.115
10.0.1.4

Need Urgent Help on Meeting Place Integration with CUCM 7.1 and AS5400 PSTN Gateway

Hi,
This is first time I am on this forum.
I have already tried going through a lot of docs on docwiki.cisco.com but couldn't find complete configuration help.
I have to integrate Meeting Place 8.X with an existing CUCM and an E1 gateway (PSTN Gateway) AS5400.
The CUCM is already part of a Telepresence Environment. I need to create a SIP trunk between AS5400 and CUCM 7.1 and then create a Trunk between AS5400 and Cisco Unified MP 8.X and then between CUMP and CUCM.
I need help on AS5400 SIP Configs as well as parameters I need to cover on CUCM (Though I have done some basic dial-peer configs but they haven't been of much help).
Then I also need help on AS5400 SIP configs with CUMP 8.0
Any docs on Integration between CUMP and TP3000 will be of great help too.
Rgds,
Asim

I can get the Ricoh to register as sip endpoint, it answeres then imediatly disconnects. Doing a monitor with Wireshark looks like it attempts to negotiate t38 but fails. Any idea why this fails?
|160.260684000|         INVITE SDP (g711U)            |                   |SIP From:
|         |(5060)   ------------------> (5060)   |                   |
|160.338806000|         INVITE SDP (t38)              |                   |SIP Request
|         |(5060)   <------------------ (63435) |                   |
|160.339545000|         491 Request Pending           |                   |SIP Status
|         |(5060)   ------------------> (5060)   |                   |
|160.547894000|         406 Not Acceptable            |                   |SIP Status
|         |(5060)   <------------------ (63435) |                   |

Cisco Meeting Place Express 2.1.1.2 and not working anymore

Hello, we currently have cisco meeting place express 2.1.1.2; however are now having issues with it. We are unable to dial to the internal extension that was previously working to login to the meetings and only get a busy signal everytime. Furthermore, whenever someone tries to schedule a new meeting via the web form, it says "request to server timed out. please try again".
I tried reaching out to Cisco TAC support; however it's no longer a supported item and am looking for assistance here. The TAC engineer was able to help assist with updating the system clock; however I believe the problems started happening after we updated the clock and rebooted the server. Now we are unable to schedule and attend any meetings (busy signal everytime) at all. I tried restarting the server itself as well as via the command line. I also now see an error during CLI restart, which I have listed directly below:
Stopping MeetingPlace SNMP/R:                              [ OK ]
Stopping mpe-tomcat-main: bash: /root/.bashrc: Permission denied
                                                           [ OK ]
Stopping mpe-tomcat-securewebservices: bash: /root/.bashrc: Permission denied
                                                           [ OK ]
Shutting down breeze:                                      [ OK ]
Shutting down fmsmaster:                                   [ OK ]
Shutting down fmsadmin:                                    [ OK ]
Stopping MeetingPlace application: /etc/init.d/mpx_app: line 264: 4955 Segmentation fault      (core dumped) ${shutdown_bin} ${shutdown_arg_1} ${shutdown_arg_2} ${shutdown_arg_3} >>${non_verbose_shutdown_output} 2>&1
                                                           [FAILED]
    ERROR: returncode = 139
Stopping MeetingPlace License Manager:                     [ OK ]
Stopping MeetingPlace database:                            [ OK ]
Stopping MeetingPlace Java RMI: Shutting down RMI Registry:
                                                           [ OK ]
Stopping Cisco MeetingPlace Express:                       [ OK ]
Starting MeetingPlace Java RMI: Starting RMI Registry:
starting daemon
mpxadmin
                                                           [ OK ]
Starting MeetingPlace database:                            [ OK ]
Starting MeetingPlace License Manager:                     [ OK ]
Starting MeetingPlace application:                         [ OK ]
    already running
Starting breeze:                                           [ OK ]
Starting fmsmaster:                                        [ OK ]
Starting fmsadmin:                                         [ OK ]
Starting mpe-tomcat-main: bash: /root/.bashrc: Permission denied
                                                           [ OK ]
Both the admin and user web interfaces work on the home pages, but can't seem to schedule any new meetings or login to any existing ones, with busy signal as well. Anyone have any ideas? We need assistance with this ASAP since it's our voice collaboration solution. Thanks in advance for any help.

Amlesh,
Here is the pertinent output:
/common/log/taos-log-a/core/core.1947.11.ConfSchd.1183266069
/common/log/taos-log-a/core/core.1837.6.gyromain.bin.1183266161
/common/log/taos-log-a/core/core.1859.6.cpgs.1183266206
/common/log/taos-log-a/core/core.1951.11.ConfSchd.1184475669
/common/log/taos-log-a/core/core.1946.11.ConfSchd.1185685269
/common/log/taos-log-a/core/core.1836.6.gyromain.bin.1185685332
/common/log/taos-log-a/core/core.1880.6.cca.1185685452
/common/log/taos-log-a/core/core.1858.6.cpgs.1185685452
/common/log/taos-log-a/core/core.1950.11.ConfSchd.1185771671
/common/log/taos-log-a/core/core.1863.6.cpgs.1185771865
/common/log/taos-log-a/core/core.1884.6.cca.1185771865
/common/log/taos-log-a/core/core.1991.6.nmpagent.1185771865
/common/log/taos-log-a/core/core.1950.11.ConfSchd.1185858067
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1188018079
/common/log/taos-log-a/core/core.1969.11.ConfSchd.1188190869
/common/log/taos-log-a/core/core.2008.6.vui.1188190988
/common/log/taos-log-a/core/core.2029.6.nmpagent.1188190988
/common/log/taos-log-a/core/core.1998.6.poclient.1188190988
/common/log/taos-log-a/core/core.1970.11.ConfSchd.1189227671
/common/log/taos-log-a/core/core.1862.6.gyromain.bin.1189227762
/common/log/taos-log-a/core/core.1883.6.cpgs.1189227807
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1189918866
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1190005281
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1190178068
/common/log/taos-log-a/core/core.1886.6.cca.1190178237
/common/log/taos-log-a/core/core.2012.6.nmpagent.1190178237
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1191906070
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1191906162
/common/log/taos-log-a/core/core.1886.6.cca.1191906248
/common/log/taos-log-a/core/core.1865.6.cpgs.1191906248
/common/log/taos-log-a/core/core.1950.11.ConfSchd.1192424479
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1192424571
/common/log/taos-log-a/core/core.1863.6.cpgs.1192424613
/common/log/taos-log-a/core/core.1951.11.ConfSchd.1192597270
/common/log/taos-log-a/core/core.1969.11.ConfSchd.1192683669
/common/log/taos-log-a/core/core.1903.6.cca.1192683817
/common/log/taos-log-a/core/core.1951.11.ConfSchd.1193029270
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1193029360
/common/log/taos-log-a/core/core.1864.6.cpgs.1193029400
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1193720467
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1193720565
/common/log/taos-log-a/core/core.1864.6.cpgs.1193720610
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1195452071
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1195452170
/common/log/taos-log-a/core/core.1864.6.cpgs.1195452213
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1196834481
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1197007273
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1197007371
/common/log/taos-log-a/core/core.1864.6.cpgs.1197007413
/common/log/taos-log-a/core/core.1952.11.ConfSchd.1198044080
/common/log/taos-log-a/core/core.1843.6.gyromain.bin.1198044184
/common/log/taos-log-a/core/core.1842.6.gyromain.bin.1199858530
My understanding is these core files are crash dumps and are safe to delete?
Jared

Meeting place and SRST feature

Hi all,
I am new to Voice communication. So, i need help from you guys.
One of my customer one to have cisco Meeting place express on their premises. Basic requirement is -
i) Voice, video and document sharing
ii) PSTN and PABX integration with the solution [SRST feature]
Can you share design and BoM?
Thanks i advance.
Russell

MeetingPlace Express is end of sale and cannot be ordered any longer.
Also, this is not the correct channel for sales/BoM assistance. You need to work with Cisco Presales assistance and/or your Cisco AM if you require assistance on that front.

Meeting Place 8.0 - Mute and Unmute Particular Participant

Similar Messages

Maybe you are looking for