Memory errors and software detection

I have the 645EMax2 and admittedly, have a power supply issue in the process of resolution. However, I have two 512mb ddr 333mhz memory sticks from Seitec. I did a scan with DocMemory and Memtest86. Both gave errors at 485mb. I swapped them round and now have errors at 512+485 (ie 997mb) - showing it to be the stick and not the holder. Took it back to the supplier and they tested with GoldMemory (freeware I guess) and found no errors.
So, would the results depend on processor speed and or BIOS config. I agree this is not conclusive til I test with a new power supply but any ideas on the realtive merits of these software testers would be welcome. Any ideas in general would be welcome.
thanks

ps. not all ram (makes and models) will work with more that 1 stick of ram (ps. boot windows xp play game (battlefiled 1942(use lots of ram)
eg kinston 256 tiny big modulals (3x256 sticks) ok in 6547 (645) sis motherboard
apcer 512 stick one works / 2 stick fails to play game with out crashing at random.
make sure you set you timings to 2.5 safe(4) rate rame speed 333 etc

Similar Messages

RoboHelp 9 gives an out of memory error and crashes when I try to import or link a Frame 10 file or

I have Tech Suite 3. If I start a new RoboHelp project and try to import or link Frame files, RoboHelp tries for a while, then I get an Out of Memory error and the program crashes.
I opened one of the sample projects and was able to link to one of my frame files without any problem, so it seems to be an issue with creating something new.
Any suggestions?

It happens when I create a new project and then try to import or link frame docs to make up the content. It starts scanning, then crashes. I did get it to the conversion setting page once, but no further.
It does not happen if I open one of the supplied example projects and link a file. But then it doesn't let me choose, during import, any style mapping. And I can't delete the sample project fold
Twice now it has told me when I tried to import (not link, but import) that my .fm file could not be opened, and told me to verify that Frame is installed (it is) and that the file is a valid frame file (it is).
The docs and project are in separate folders on my C: drive.

Random memory errors and resetting

Hello folks
I've got a KT4V motherboard and an Athatlon 1800 XP. The problem is that I keep getting occasional memory errors or the machine will just reset. (';(')
The problems don't occur with any perticular program or after any perticualr period of time. It can be running all day on full load and then pop, it resets or gives me a memory error
My system temperature under full load is 45 C. With the system temperature around 30 C. So it's not an overheating problem. I've reinstalled win2k twice with no effect. I've installed the registry patch from the AMD website for systems using XP processors and AGP cards. My powerpack is 350W but it says pentium 4 ready so I guess it should work with my systms power requirements. I Have a heatsink for XP 2000+ and above as well as two extractor fans on the case. But they don't add much load.
Any Ideas

Hello
My specs
MSI KT4V
AMD 1800+
Dlink DE 528 PCI (cable modem)
Maxtor 10GB HD (don't know model off top of my head)
ASUS V8170 Magic GeForce 4
I've reinstalled windows for the nth time and this time I've taken APIC off in the bios. (That's not the power management thing)
So far it hasn't reset. Although given the nature of the problem It'll be a couple of days testing before I can be absolutly sure.
As for the powerpack. It gives a combined rating on the side and it's 200W for the 5 and 3.3V rails.

Added ram to mac pro, get ecc memory error and 4mem/9/40000006: B:0 C:0 R:0

I recently purchased a 2.8 8 core Mac pro (early '08 model). It came shipped with 2gigs of ram (one gig on riser card a, one gig on riser b).
I purchased 2 1gig sticks from ramjet, i followed a apple tutorial and installed the 2 original sticks in riser card A (slots 1 and 2), and the 2 new Ramjet sticks in riser card B (slots 1 and 2) for a total of 4gigs.
When I powered on the computer everything was fine, clicked the black apple logo to view "about this mac" and the 4gigs total memory showed up. However when i clicked "more info" then "memory"... it showed the status on one of the new ramjet sticks as "ecc error"
I rebooted the computer and the error message was gone, all sticks showed a status of "ok"
a few days went by and i was constantly checking the system profiler and the status would always show the sticks as "ok" and the computer acts totally normal, i run pro tools, logic pro, photoshop and it would run flawlessly.
The fact it showed an error a few days prior was still bugging me so i decided to call the applecare protection and consult with them... they said to remove and re-install the memory, reboot holding down the "option + command + R + P" to reset memory, then to reboot again holding down the "D" to do a Apple hardware Test.
the first test showed pass, i checked the extended test and that showed a 4mem/9/40000006: B:0 C:0 R:0 error, the second and 3rd tests froze and i had to push the power button to reboot.
I contacted Applecare once again and they said that since my computer was not acting funny nor freezing during apps or showing any errors that it should be fine, as long as the status said "ok" in system profiler and all four gigs registered in "about this mac" that no harm is going to happen.
when i asked what that long error code was she said it did not come up in her computer but she thinks its because its not official apple memory.
I tried searching online in forums to solve this but i cant find anything on that specific error code.
sorry for the long post but i wanted to be as detailed as possible to get the best advice
thanks and any help would be much appreciated.
and by the way i did contact ramjet and they are willing to replace my memory but there advice was also not to worry that its only giving that error due to the memory not being "official" apple memory, but if it registers and the computer acts totally normal to just leave it be.
thanks again,
David
Message was edited by: priv510
Message was edited by: priv510

thanks for the reply Kappy,
yes they have heat sinks and ramjet states they are "apple grade"
i downloaded the istat widget (not sure how accurate that is) and it says the apple sticks on A run at 32 degrees and the ones on B run at 31 degrees
the comp is practically brand new and when i opened it for the ram install it still looked brand new (no dust) its only a few weeks old.
I am going to return the sticks for sure to be safe but where im lost is.... yes it did show ecc error once, never again, its been a week now still no ecc error. I ran tech tool deluxe and everything passes, i ran "Rember memory test" and it passes, system profiler registers all 4 gigs and shows status as ok, computer acts totally normal? but the apple hardware test fails i guess im lost to why the comp says the ram is ok nd passes most tests just not the AHT test.
Thanks for your help i hope the new sticks dont show any error
David
O and I forgot to mention i called applecare again and requested a different agent to help me and he said Ecc stands for error correcting? so if it came up once and not again it did what it was suppose to do... corrected itself (now that sounds like more b.s to me but i have no idea about computer stuff )
Message was edited by: priv510

Out of Memory Error and large video files

I created a simple page that links a few large video files (2.5 gig) total size. On Preview or FTP upload Mues crashes and gives a Out of Memory error. How should we handle very large files like this?

Upload the files to your host using an FTP client (i.e. Filezilla) and hyperlink to them from within your Muse site.
Muse is currently not designed to upload files this large. The upload functionality takes the simple approach of reading an entire linked file into RAM and then uploading it. Given Muse is currently a 32-bit application, it's limited to using 2Gb of RAM (or less) at any given time regardless of how much RAM you have physically installed. We should add a check to the "Link to File..." feature so it rejects files larger than a few hundred megs and puts up a explanation alert. (We're also hard at work on the move to being a 64-bit app, but that's not a small change.)
In general your site visitor will have a much better experience viewing such videos if you upload them to a service like YouTube or Vimeo rather than hosting them yourself. Video hosting services provide a huge amount of optimization of the delivery of video that's not present for a file hosted on standard hosting (i.e. automatic resizing of the video to the appropriate resolution for the visitor's device (rather than potentially downloading a huge amount of unneeded data), transcoding to the video format required by the visitor's browser (rather than either having to due so yourself or have some visitors unable to view your video), automatic distribution of a highly viewed video to multiple data centers for better performance in multiple geographies, and no doubt tons of other stuff I'm not thinking of or am ignorant of.

Help - Out of Memory error and intermittency problem in OIM

Hello to all.
I'm having some problems in my environment and I would drive to identify the real problem.
The environment I am using for the reconciliations is always the problem of out of memory, and often after this problem began to appear another problem of out of memory that is: java.lang.OutOfMemoryError: PermGen space
And when this problem started to appear also in the parallel User warned me of a problem he is going to happen in the following way, the User log in with your User OIM Web, but when we try to do any action, by clicking the users to search for example, the system of the message as if it had timed session, and it happens every time.
What has been there, when I looked in the log did not identify the cause of the problem, someone would tell me as a starting point, because I do not know what to do.
A doubt, we apply some patches that were described in doc.id 553266.1 (6685235, 5389650, 6454278, 6880142, 6808170),
patches that can be applied in a random or should be applied in order.
Sorry for my English, but my level is not very advanced.
Thanks,
Victor

Hi,
We also used to have memory problems earlier. The root cause was the memory grantinted to the JVM. We can configure the memory parameters from the application server.
In JBoss, we do it in following way:
File: [SERVER_HOME]/bin/run.conf (Linux box)
Line: JAVA_OPTS="-XX:PermSize=128M -XX:MaxPermSize=256M -Xms1280m -Xmx1280m"
You could try increasing the MaxPermSize to say about 2 GB. This should reduce the Out Of Memory Exception.
N.B.: If you done have the JAVA_OPTS as mentioned above, then try using the the way I am using it. It might help.

How can I access docs on a frozen Pages app? The Pages app froze up after attempted repair at the Genius bar last night. The IPAD was having significant memory errors, and staff backed it up to the ICloud, then wiped the IPAD clean and restored the apps.

How can I access documents on a frozen Pages app? The Pages app on my IPAD does not function after the IPAD was backed up on the ICloud, and then restored. I synced the IPAD, but this did not solve the problem. Other apps are working, just not Pages. Please help! These docs are badly needed for work. Thanks so much!

Have you tried closing the Pages app completely and seeing if it works ok when you re-open it ? From the home screen (i.e. not with Pages 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Pages app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Can anyone help with an out of memory error on CS2?

Hello,
I have been battling with an out of memory error on a dell laptop running 2gb of ram. I have had no prior issues with this laptop running CS2 until last week when I started getting the out of memory errors. I have seen several articles about this occuring on later versions of illustrator. Just prior to this issue appearing I had to delete and rebuild the main user profile on the computer due to it consistently logging into a temporary account.
Once the new profile was established and all user documents and profile settings were transferred back into it, this problem started showing up. The error occurs when clicking on files listed as Illustrator files, and when opening the illustrator suite. Once I click on the out of memory error it still continues to load illustrator. The files are located on a server and not on the remote computer. I have tried to copy the files to the local hard drive with the same result when I try to open them. I also tried to change the extension to .pdf and got no further. I tried to open a file and recreate the work and all I got was the black outline of the fonts. none of the other artwork appeared. once rebuilt, when trying to save, It gives the out of memory error and does not save the file.
Illustrator was installed on another dell laptop, same model, etc and works fine. no problem accessing network files. I just attempted to use Illustrator from the admin profile on the machine in question and it works fine and lightening fast. Just not from the new rebuilt profile. I have tried to uninstall and reinstall the software. it has not helped. could there be stray configuration settings that we transfered over to the new profile that should not have been?
Any insights will be helpful.
Thank You,
Brad Yeutter

Here are some steps that could help you:
http://kb2.adobe.com/cps/320/320782.html
http://kb2.adobe.com/cps/401/kb401053.html
I hope this helps!

Out of memory error with 80Kb file?

Hi, my pc has 2Gb of Ram, a page file that is setup correctly
and the physical ram is almost non-used (500Mb)
When I start DW and load a php file of 80Kb approx., it just
hangs/locks up. When I wait for it, it gives me an "out of memory"
error, and when you look in windows task manager, it just keeps
hogging up ram.
My laptop is a "simple", 1Gb Hp pavillion, and when I open
the file there, it just works like it's supposed to, using about
70Mb of ram, instead of the gigabyte(s) it does on my developer
machine....
Adjusting virtual memory has absolutely no effect.. It seems,
after some reading, that people using 2gb of ram, have the most
problems in this area?
Adobe, please help here !
EDIT: i just tested another file, 136Kb large, that loads
normal!, so it has to do with the files in specific... If you want
to test the files, just download "Simplemachines Forum" and load
the "load.php" or the "post.php" files from the source directory,
to trigger the lockup...

mmm... just tried using a "workaround" if you still can call
it that
Installed a virtual machine (xp) with less than 2gigs, and it
works... I really hope someone else has got these kind of errors
yet.... 2500$ + software, wich I can't use for now... Using
notepad2 for time being...

Status:\t10.0000 SUPPLY MEMORY ERROR + cannot install printer

Hi I have an HP Laserjet P1102w printer. I changed my router, and changed my laptop and now am not able to install the printer on the new laptop and router.
I have tried installing from the HP smart install program via USB cable. When i do this I get an error message saying that the installation failed and advising me to turn off the printer, turn it on again and try again.
I have tried resetting the printer to the default settings, then printing a test page and using the supplied IP address to access the printer. An error message says:
Status: 10.0000 SUPPLY MEMORY ERROR
I have tried ignoring this and going to the HP Smart Install Tab and installing the printer that way. When i did this I get a similar error message to before saying that the installation failed and advising me to turn off the printer, turn it on again and try again.
Could someone please advise me on what to do? Should I focus on trying to get the printer installed, then try to fix the supply memory error or fix the supply memory error and then try to install the printer? I'm a bit loathed to buy a new toner cartridge, if after doing this the printer may still fail to install.
Thanks in advance,
Paul
This question was solved.
View Solution.

Very good information. Since this printer is having such a hard time reconnecting try resetting the printer first. I have provided a link on how to restore this printer to factory defaults. I had a similar problem with this printer until I installed a very recent firmware update. This is how I finally was able to get it to install and connect:
Clicked on the Software and Drivers tab at www.hp.com/support and typed in my printer name (Laserjet P1102w) and pressed the enter key. Next I selected my operating system (you will need to know if your computer's system type is 32 bit or 64 bit or I would provide a link).
Under the Driver and Product installation I installed the HP Laserjet Full Feature Software and Drivers and proceeded to install it using the USB to wireless configuration.
After the test page printed, the printer disconnected from the network so with the USB cord still attached, I went to the same download page and installed the most recent firmware update: Version 20130213 which went very well I might add.
Next, I went to the Start button and selected All Programs>>HP>>HP Laserjet Professional P1100 series>>Wireless Configuration and finished getting my printer connected back to my network.
I strongly suggest the firmware update. I hope this information helps you out. Try the steps above and if it doesn't work let me know. I will look at the error message once you are able to get it installed. It may be that when you restore the printer to factory defaults you will also want to reboot the computer in case you are running low on available memory, hence the error message.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Memory error after C042 errors on users database

Hi,
We recently have memory error messages on the POA and on the Client.
The error seemed to follow several C042 errors:
The database function 53 reported error [C042] on user4mn.db
Error: Memory error. Memory function failure [8101] User:
I cannot find any process that is accessing the user database at that time (GWcheck, Backup)
The user also gets a memory error and has to restart the client.
any ideas?

On 9/7/2011 2:16 AM, pdjongh wrote:
>
> Hi,
>
> We recently have memory error messages on the POA and on the Client.
> The error seemed to follow several C042 errors:
> -The database function 53 reported error [C042] on user4mn.db
> Error: Memory error. Memory function failure [8101] User:-
>
> I cannot find any process that is accessing the user database at that
> time (GWcheck, Backup)
> The user also gets a memory error and has to restart the client.
>
> any ideas?
>
>
Have you run a full contents and structure check on the user?

E71 keeps giving out of memory error; I can't find...

My Nokia E71 (it's black so it may be an E71x, I guess) keeps giving me out of memory errors. I use my phone for nothing but voice calls, text messages, and emails. I have cleared all call logs, deleted all emails except 5 (they have no attachments) and cleared deleted emails, and deleted all text messages. I went into file manager and made sure there are no images, videos, etc. on the phone. I set up options to use memory card for emails. I've turned the phone off, waited 15 or 20 seconds, and turned it back on.
I did all this a couple weeks ago. Ever since then. every couple days I get these out of memory errors, and the phone memory shows me 119 MB used and something like 300K free. I'm at the point where every few emails that come in, I have to delete all emails, erase all text messages, etc. or the phone is just too low on memory to operate.
What else can I try? I don't have any additional applications installed. I've even tried to delete built-in apps such as RealPlayer but it didn't seem like that was possible.
This is getting really annoying. Please help!

@EricHarmon
Although all user data would be deleted, have you tried resetting device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by user)?
Happy to have helped forum with a Support Ratio = 42.5

Out of Memory Error in Java Agents running in lotus notes

I have a java agent running inside lotus notes jvm. It runs fine for some days but after some days start giving out of memory error and terminates.
I need to restart agent manager in notes to enable java agent running. Is there a way to catch out of memory error so that on its catch i could restart agent manager.
Regards,
Saitu

Dear Peter,
The agent is written in java and
I need to know a way to enter catch block of 'OUTOFMEMORYERROR'.
My whole code is in a try block with two catches, one for outofmemoryerror and another for exception. When outofmemory error occurs control passes to the exception catch and not outofmemoryerror catch.
Since out of memory is an error and not an exception, is there a way to catch it or run some code when out of memory occurs.
Regards,
Saitu

FCP - Out of Memory Error in 10.6.6

Running a MacBook Pro 17" (A1261) and while I edit, I got a "Out of Memory" Error and an "Invalid Operation". Can't reopen the sequence on my MacBook but it opens with no problem on a Mac Pro.
Gonna re-install the OS and see if that helps.

I just had something very similar happen. A sequence that I've been editing for over a month now no longer opens (since installing the 10.6.6 update) I'm getting the same "out of memory" and I/O error codes.
I'm at a loss what to do. Other editing projects open fine. But so far I haven't been able to open
any of the project files I've vaulted from the last six weeks.
Does anyone have any idea what changes 10.6.6 might have made to cause this and how
it could be rectified. I really need to get back into my project file.

'Out Of Memory' issue and over large Project File...

Hi everyone, my issue is a common one but yet to find out reasons why after trying many suggestions.
I am working in Final Cut Pro 6 on an edit 35 minutes long. It's a holiday video edit of a snowboarding trip filmed on GoPro HD and a small handy Sony Handycam. All rushes are transcoded to ProRess 422. I have cut the edit and doing the final touches with the colour using Synthetic Appertures Color Finesse 3. My project file starts off at a mere 17MB before colour grading/correction from what I can tell seems pretty normal. By the time I get to around half way my Project ile has increased greatly to over 70MB, FCP becomes slow and unstable then I start to get crashes and reloads of the project take around 15 minutes or more to open. This seems quite a jump to me once grading starts?
Originally I did have around 6 sequences of footage (one for each day of shooting on holiday) where each contained all the usable clips I could possibly use for the edit. Then a Master sequence where I would paste my desired clips to for trimming and editing to music. (all music in AIFF)
I have deleted all folders in the browser that arent in use now and the only sequence I have now is the master, nothing else at all! No Motion graphics but some text at the start of the edit, nothing animated. No stills, but I do have some freeze frames but I'd say no maore than 20 over the whole 35 minutes. I have deleted unused render files and trashed preferences.
I did see somewhere that someone suggested splitting the edit in to two different projects? There wasnt a clear explanation of this.
I'm running....
iMac 24 inch - early 2009
2.66 GHz Intel Core 2 Duo
8GB 1067 DDR3
NVIDIA GeForce 9400 256 MB
OS X10.8.2
Hope this is all you need to help me get this edit completed and exported off. Any more info you need just ask!
Thanks in advance.
GK

Hi Nick
I have already successfully rendered 20 minutes of the project with no issues. As the project file has increased it has become troublesome. Beach balling when pasting the colour finesse attributes to my next clip for instance.
When I attempt to render now its instantly fails with a "Out Of Memory" error and eventually crashes FCP.
Thanks.

Memory errors and software detection

Similar Messages

Maybe you are looking for