Memory related Profile Parameters calculation in Production Env.

Hi All,
Current Physical mem available  Kb: 12581480 for our production system.
I want to set the values for abap/heap_area_dia, abap/heap_area_nondia and abap/heap_area_total , How to calculate these values.Is there any method to do the same???
Regards,
Prashant

Hi Juan,
Memory related parameters values in CI -:
PHYS_MEMSIZE               :              6500
abap/swap_reserve                           20971520
abap/heaplimit                              41943040
Parameters Values in App Server1-:
ztta/roll_area                              15000000   
abap/heap_area_nondia                       2000683008 
abap/buffersize                             760000     
Parameters Values in App Server2-:
ztta/roll_area                              15000000   
abap/heap_area_nondia                       2000683008 
abap/buffersize                             760000     
In Production Env RAM of CI is 12 GB and RAM of Apps servers in 4GB each.
Please suggest.
Regards,
Prashant

Similar Messages

  • Problem description: I have ordered a new iMac but my current one seems to be running very slowly.  I believe it to be a memory related problem but can't seem to identify what is causing it.  Help is greatly appreciated.

    Problem description:
    I have ordered a new iMac but my current one seems to be running really slowly.  I believe it to be a memory related problem but can’t seem to identify what is causing it.  Your help is greatly appreciated.
    EtreCheck version: 2.1.8 (121)
    Report generated March 7, 2015 at 4:01:26 PM PST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (24-inch, Early 2008) (Verified)
        iMac - model: iMac8,1
        1 2.8 GHz Intel Core 2 Duo CPU: 2-core
        2 GB RAM Upgradeable
            BANK 0/DIMM0
                1 GB DDR2 SDRAM 800 MHz ok
            BANK 1/DIMM1
                1 GB DDR2 SDRAM 800 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        ATI Radeon HD 2600 Pro - VRAM: 256 MB
            iMac 1920 x 1200
    System Software: ℹ️
        OS X 10.10 (14A389) - Time since boot: 23 days 18:5:35
    Disk Information: ℹ️
        ST3320820AS_Q disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 319.21 GB (195.05 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        HP Officejet 6000 E609n
        Apple, Inc. Keyboard Hub
            Primax Electronics Apple Optical USB Mouse
            Apple, Inc Apple Keyboard
        Apple Inc. Built-in iSight
        Western Digital External HDD 500.11 GB
            My Passport (disk1s1) /Volumes/My Passport : 500.11 GB (200.60 GB free)
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/Popcorn 4/Popcorn.app
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.aliph.driver.jstub (1.1.2 - SDK 10.7) [Click for support]
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.accountsd.plist
        [killed]    com.apple.AirPlayUIAgent.plist
        [killed]    com.apple.bird.plist
        [killed]    com.apple.CalendarAgent.plist
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.CallHistorySyncHelper.plist
        [killed]    com.apple.cloudd.plist
        [killed]    com.apple.cmfsyncagent.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.coreservices.uiagent.plist
        [killed]    com.apple.EscrowSecurityAlert.plist
        [killed]    com.apple.nsurlsessiond.plist
        [killed]    com.apple.pluginkit.pkd.plist
        [killed]    com.apple.printtool.agent.plist
        [killed]    com.apple.rcd.plist
        [killed]    com.apple.recentsd.plist
        [killed]    com.apple.sbd.plist
        [killed]    com.apple.scopedbookmarkagent.xpc.plist
        [killed]    com.apple.secd.plist
        [killed]    com.apple.security.cloudkeychainproxy.plist
        [killed]    com.apple.spindump_agent.plist
        [killed]    com.apple.telephonyutilities.callservicesd.plist
        22 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.AssetCacheLocatorService.plist
        [killed]    com.apple.awdd.plist
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.diagnosticd.plist
        [killed]    com.apple.emond.aslmanager.plist
        [killed]    com.apple.GSSCred.plist
        [killed]    com.apple.icloud.findmydeviced.plist
        [killed]    com.apple.ifdreader.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.nsurlsessiond.plist
        [killed]    com.apple.periodic-daily.plist
        [killed]    com.apple.periodic-monthly.plist
        [killed]    com.apple.periodic-weekly.plist
        [killed]    com.apple.softwareupdate_download_service.plist
        [killed]    com.apple.softwareupdated.plist
        [killed]    com.apple.spindump.plist
        [killed]    com.apple.tccd.system.plist
        [killed]    com.apple.wdhelper.plist
        [killed]    com.apple.xpc.smd.plist
        [killed]    org.cups.cupsd.plist
        20 processes killed due to memory pressure
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.sonos.smbbump.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    UNKNOWN Hidden (missing value)
        Jawbone Updater    Application  (/Applications/Jawbone Updater.app)
        Dropbox    Application  (/Applications/Dropbox.app)
    Internet Plug-ins: ℹ️
        Photo Center Plugin: Version: Photo Center Plugin 1.1.2.2 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
        CitrixICAClientPlugIn: Version: 11.2.0 [Click for support]
        iPhotoPhotocast: Version: 7.0
    3rd Party Preference Panes: ℹ️
        Citrix Online Plug-in  [Click for support]
        Flash Player  [Click for support]
        UE Smart Radio  [Click for support]
    Time Machine: ℹ️
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 319.21 GB Disk used: 124.16 GB
        Destinations:
            Time Machine Backups [Local]
            Total size: 3.00 TB
            Total number of backups: 98
            Oldest backup: 2013-08-28 05:45:36 +0000
            Last backup: 2014-12-30 19:39:32 +0000
            Size of backup disk: Excellent
                Backup size 3.00 TB > (Disk size 319.21 GB X 3)
    Top Processes by CPU: ℹ️
             5%    com.apple.WebKit.Plugin.64
             3%    WindowServer
             2%    sysmond
             0%    AppleSpell
             0%    com.apple.WebKit.Networking
    Top Processes by Memory: ℹ️
        41 MB    Finder
        41 MB    iTunes
        37 MB    Safari
        32 MB    com.apple.WebKit.Plugin.64
        32 MB    mds
    Virtual Memory Information: ℹ️
        53 MB    Free RAM
        501 MB    Active RAM
        463 MB    Inactive RAM
        398 MB    Wired RAM
        78.46 GB    Page-ins
        3.04 GB    Page-outs
    Diagnostics Information: ℹ️
        Mar 7, 2015, 12:41:34 PM    /Library/Logs/DiagnosticReports/Inkjet4_2015-03-07-124134_[redacted].crash
        Mar 5, 2015, 07:42:29 PM    /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-03-05-194229_[ redacted].crash

    That certainly looks like a low memory issue, 2 GB ram is barely enough to run Mac OS X versions from Lion through Yosemite.  The high number of Page Outs and killed processes show very high memory pressure.
    Try adding memory, but be sure it is high quality, Mac certified memory such as that from OWC, http://www.macsales.com or Crucial, http://www.crucial.com

  • Dynamic profile parameters

    Hi
    I would like to get all the list of dynamic profile parameters at R/3 level.
    Could anyone please let me know if there is any OSS note availabe which lists out all the dynamic parameters? I tried but,couldn`t find the related ones.
    Is there any way to find out from R/3 level?
    regards,
    Vinodh.

    Dear Vinod,
    There is a table called TPFYPROPTY which lists you all the dynamically switchable parameters identified by dynamic indicator. you can view this table using transaction se16.
    you can also get into Rz11 and check the dynamically switchable check box value for that corresponding parameter.
    Reward points if useful.
    Sree

  • Profile parameters controlling idle passwords

    We are planning to activate the two profile parameters:
    login/password_max_idle_initial
    login/password_max_idle_productive
    on our productive ERP system to control the validity of idle initial & productive passwords.
    Our Basis-team are concerned about this, because the change will take effect on all clients on the system. Once in a while they need access to client 000, 001 & 066 and now they fear that the passwords on their personal accounts will be expired when they try log on to those clients (nobody, except the basis-guys have access to client 000,001 & 066)
    I would like to hear from you, how you handle this issue in your installation.
    Best regards,
    Peter Jæger

    Luckily for you, people have thought this to be usefull before and it was added to the [SDN Security Funactionality Wishlist |https://wiki.sdn.sap.com/wiki/display/Security/Abilitytoassignsecuritypoliciestospecific+users] some time ago.
    Last I heard, the status was that the code base for the feature was approved and already implemented. The application components to be able to use it will be delivered with a future release (so you are looking at sometime next year).
    Anyway, why don't you give the basis folks the ability to logon to client 000 from their SolMan using trusted RFC? This was the local password can be deactivated without any interuptions and when the do need it for some reason, they go via the SolMan and reset the password in SU01.
    Cheers,
    Julius

  • Understanding profile parameters...

    hi friends..  some profile parameters are starting with  rdisp/.... ztta/.... rspfpar   what does
    they mean..                       Thank you all...
    Moderator message: not directly related to ABAP development, please search for information before asking.
    Edited by: Thomas Zloch on Apr 20, 2011 10:49 PM

    Review the documentation for each parameter in RZ11 and ask a more specific question...

  • Create profile parameters using RZ10

    Hi friends,
    i have BW 3.1c and when i am trying the transaction RSA1 , it says YOU MUST ONLY WORK IN CLIENT 000 , i know that i have to create profile parameters using RZ10 before client copy but i dont know how to create/copy the profile parameters , if you can send me the step by step instrutions on how to create profile par using rz10 , your help will be much appreciated.
    Thanks Very Much
    Yach

    Hi,
    The solution is available in the note: 122679
    Set the default client as described in Note 116432 point (e) (setting the productive client) to the client that you will work with.
    In addition you must enter this default client in the field BWMANDT of the table RSADMINA (transaction SE16).
    With rgds,
    Anil Kumar Sharma .P

  • I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.​Please help me for that.

    I want to check all functions of PCI 6534.I have read the user manual..I have some memory related questions.Please help me for that.
    1.)If i am using the continuous output mode.and the size of generated data is less than 32 MB.If i want to preload the memory,what should i do?I want that first of all i load all my data to onboard memory & then i want to make start the transfer between 6534 & peripheral.Is it possible?As per me it should be.Plz tell me how should i do this?I think that in normal procedure the transfer between 6534-peripheral & outputting data from pc buffer to onboard memory works parallely.But i don't want this.Is it poss
    ible?
    (2).Similarly in finite input operation(pattern I/O) is it possible to preload the memory and then i read it?Because i think that the PC memory will be loaded automatically when 6534 acquires the data and then when we use DIO read vi the pc buffer data will be transferred to application buffer.If this is true,i do not want this.Is it possible?
    (3) One more question is there if i am using normal operation onboard memory will be used bydefault right?Now if i want to use DMA and if i have data of 512 bytes to acquire.How will it work and how should i do it?Please tell me the sequence of operations.As per my knowledge in normal DMA operation we have 32 Bytes FIFO is there so after acquisition of 32 bytes only i can read it.How it will known to me that 32 bytes acquisition is complete?Next,If i want to acquire each byte separately using DMA interrupts what should i do?Provide me the name of sourse from which i can get details about onboard memory & DMA process of 6534 specifically
    (4).In 6534 pattern Input mode,if i want to but only 10 bits of data.and i don't want to waste any data line what should i do?

    Hi Vishal,
    I'll try to answer your questions as best I can.
    1) It is definitely possible to preload data to the 32MB memory (per group) and start the acquisition after you have preloaded the memory. There are example programs on ni.com/support under Example Code for pattern generation and the 6534 that demonstrate which functions to use for this. Also, if your PC memory buffer is less than 32MB, it will automatically be loaded to the card. If you are in continuous mode however, you can choose to loop using the on-board memory or you can constantly be reading the PC memory buffer as you update it with your application environment.
    2) Yes, your data will automatically be loaded into the card's onboard memory. It will however be transferred as quickly as possible to the DMA FIFO on the card and then transferred to the PC memory buffer through DMA. It is not going to wait until the whole onboard memory is filled before it transfers. It will transfer throughout the acquisition process.
    3) Vishal, searching the example programs will give you many of the details of programming this type of application. I don't know you application software so I can't give you the exact functions but it is easiest to look at the examples on the net (or the shipping examples with your software). Now if you are acquiring 512 bytes of data, you will start to fill your onboard memory and at the same time, data will be sent to the DMA FIFO. When the FIFO is ready to send data to the PC memory buffer, it will (the exact algorithm is dependent on many things regarding how large the DMA packet is etc.).
    4) If I understand you correctly, you want to know if you waste the other 6 bits if you only need to acquire on 10 lines. The answer to this is Yes. Although you are only acquiring 10 bits, it is acquired as a complete word (16bits) and packed and sent using DMA. You application software (NI-DAQ driver) will filter out the last 6 bits of non-data.
    Hope that answers your questions. Once again, the example code on the NI site is a great place to start this type of project. Have a good day.
    Ron

  • Sql server Configuration option when moving packages from dev env to production env

    hi folks:
      Our SSIS engine is SQL2008R2 and I am in charge of ssis package development and deployment from dev env to production env. 
      This is what I've done using configurations to move packages from dev to production.
      1. on my local machine, I've created a database called SSIS_Config and a table that stores all 
      configration settings
      CREATE TABLE [dbo].[SSIS Configurations]
    ConfigurationFilter NVARCHAR(255) NOT NULL,
    ConfiguredValue NVARCHAR(255) NULL,
    PackagePath NVARCHAR(255) NOT NULL,
    ConfiguredValueType NVARCHAR(20) NOT NULL
    2. on dev ssis server, there is the same table [dbo].[SSIS Configurations] on SSIS_Config db which stores all configurations
    Once package has been deployed to dev env and run with success, I'll move it from dev to prod
    3. On Prod ssis server, there is the same table [dbo].[SSIS Configurations]  on SSIS_COnfig db which stores all configurations
    once ssis pkg has been deployed using deployment manifest, it runs without errors as all production db connection
    will be updated manually in the table [dbo].[SSIS Configurations] 
    Our production env is unique as it's completely locked down and the only way to connect is through remote in session. 
    At this moment, I am maintaining three [dbo].[SSIS Configurations]  tables : on my local machine, on SSIS dev server and on SSIS prod server. 
    This works fine so far as I am the sole developer... Soon, we will have more developers joined to develop ssis package .
    I am wondering if there is anyway to cut the table maintained on my local machine and only use ones on dev server and prod server ? 
    I've tried using the table on dev server to disperse connectionstrings, it works file on dev env.  However, when I deployed to product server,
    since there is no sql connection between dev and prod, the configuration information can not be retrieved and theirfore package is failed.
    Any ideas on how to move packages from local to dev to prod env.? 
     Thanks
     Hui
    --Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

    Thanks Nearby BI guy. Am I correct  that  in your SSIS packages, there is only one connection manager which gets ConnectionStr  populated from package configurations which is .xmlconfig
    file and  you then use expressions to populate  connectionStrs of other connection managers through the ssisconfiguration tables? 
    Also for the one on Production environment, the contents of .xmlconfig has to be manually
    changed in order to match the one on production env.
    Is that correct?
    I am thinking about using environment variables to point to the Config Database on each
    local/dev/prod environment, but some environments may have strict policy on the usage of environment variables.
     thanks
     Hui
    --Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --

  • Which R3-Profil-Parameters are Reported ?!?

    I have a Sap Solution Manager (SSM) with Enhancement Package1 which gets data for the EWA (Early Watch Alerts) once a week (on sundays) from the connected SAP Systems. The data is then saved in a set of tables named "DSWPBI_*", i.e.
    DSWPBI_Server
    DSWPBI_Sysdata
    DSWPBI_System
    For Auditing Issues i am specially interested in the R3-profil-parameters which are stored in the table DSWPBI_Server. My question regarding the values for these parameters is:
    Which value will be stored (and reported later) when a profil parameter is changed dynamically (means the parameter will be activated without restarting the system). For example the dynamically changeable parameter xyz may be set to the value "1" in the instance profil but is dynamically changed to "2" during operations. Which of these values will be found (and reported) in the table DSWPBI_Server ?
    Is it the value "2" because it is the momentarily active one or is it "1" because it is the value saved in the profile file (and will be active after the next reboot) ???
    Thanks you for your help,
    Christoph

    will assign points to any suggestion

  • Actual activity price calculation for production order

    Hi
    Can any one guide me in how many ways we can assign actual activity price calculation for production order?
    I knew only one way by assigning PPP2 costing variant?
    I have another doubt is: if we don't mention any material valuation indicator (moving average, standard) in valuation variant, how system will calculate material prices? is there any other way, to recognize the prices by system?
    regards,
    Ramesh B

    Dear,
    Costing variant PPP2 is linked to some valuation variant inn OPL1
    System will check the valuation of material and activity according to this valuation variant
    For material valuation there are many stg acceding to which system will take the price the raw material,
    Valuation strategy for material component
    Strategy sequence that determines the valuation of the materials used in the cost estimate.
    Use
    The materials are valuated using the price in the material master record or the values calculated in a material cost estimate.
    Procedure
    You can enter a single strategy, or you can enter multiple strategies in the form of a strategy sequence. If you enter multiple strategies, the priority of the strategy determines what price or what values are selected.
    Examples
    Assume that the following strategy sequence is entered for material valuation:
    1. Planned price 1
    2. Standard price
    3. Moving average price
    If the system finds a value in the Planned price 1 field (costing view), this value is taken as the value for valuating the material.
    If the system does not find a value, the value in the Standard price field (accounting view) is used.
    If the material does not have a standard price, the system uses the value from the Moving average price field.
    if you have not mentioned, then system will give error that "valuation stg not found"
    Valuation strategy for internal activities and processes-
    Strategy sequence that determines how internal activities and processes are valuated in costing.
    Use
    The activities and business processes used are valuated with the prices from Cost Center Accounting or Activity-Based Costing to determine the production costs or process costs. The prices can either be calculated iteratively through price calculation, or entered manually by the user.
    Procedure
    You can enter either a single strategy or more than one strategy in the form of a strategy sequence. If you enter more than one strategy, the priority of the strategy determines which price is selected.
    Examples
    The following strategy sequence is entered:
    1. Actual price of the previous period
    2. Plan price of the previous period
    3. The most current plan price
    If the system finds a price for the activity type, this price is used for valuating the internal activities. If no price was calculated for the previous period, the plan price from the previous period is used to valuate the activity type.
    If the system cannot find a plan price for the previous period, it looks for a future plan price, using the next price in the posting period to valuate the internal activities. For example, if plan prices have been entered for periods 2 and 3, and a plan price is calculated in period 1 for period 4, the system uses the price from period 3 in accordance with the valuation strategy Most up-to-date plan price.
    Again if you have not mentioned, then system will give error that "valuation stg not found".
    You can use any costing variant for actual (PPP2)and planned(PPP1) according to your requirement.. check in OPL1

  • Accessing Exchange Profile Parameters programatically (using Java/ ABAP)

    Hi All,
    Exchange Profile parameters can be accessed using the URL http://<server>:<port>/exchangeProfile
    Does anyone know how to access 'Exchange Profile parameters' programatically. (from java).
    Code snippet for the same would be of great help.
    Regards,
    Siva Maranani

    Hi,
    Is there any way to access exchange profile parameters using Java?
    I need to access exchange profile from an UDF.
    Thanks in advance.
    Pedro Leal

  • DB02 ! Alert Monitor ! Profile Parameters ! Compatible value : 11.2.0

    Hi,
    My system is :
    SAP ECC 6.0 EHP 5 last SP available.
    Database Oracle 11G 11.2.0.2.0
    In transaction DB02 , Alert Monitor ,  Profile Parameters,  there is a red alert in "compatible "
    value : 11.2.0 <> 10.2.0
    How can i corret this red alert ?
    Also in DB02 , Space Management,  Segments , Mosta Allocate extents in any segments,  has red alert.
    How can i fix it ?
    Thanks.

    Hello,
    these checks are performed with settings as per DB17.
    http://help.sap.com/saphelp_nw70/helpdata/EN/25/5215e970077e4fb366e5ce25629aac/frameset.htm
    In transaction DB02 , Alert Monitor , Profile Parameters, there is a red alert in "compatible "
    value : 11.2.0 10.2.0
    How can i corret this red alert ?
    If your DB is 11.2.0 10.2.0, please update check condition in DB17
    Also in DB02 , Space Management, Segments , Mosta Allocate extents in any segments, has red alert.
    Note 666061 - FAQ: Database objects, segments and extents
    http://help.sap.com/saphelp_nw04s/helpdata/en/25/5215e970077e4fb366e5ce25629aac/content.htm
    thanks
    ashish

  • Changing dynamic profile-parameters in batch

    Hello,
    want to change dynamic profile parameters (rdisp/btctime) in batch.
    I know that i can change this in Transaction RZ11 - but i must change it, depending on our
    batchstrategy in the night.
    best way for me - is to change it via batchprogram - with variant 'parameter' - 'value'.
    thank you for help
    best regards
    L.Misof
    R&S

    Hi,
    why don't you use the operation modes for increasing batch work processes in night ?
    Thanks
    Sunny

  • A handy query which lists all important DG related init parameters

    Version : 11.2/10.2
    Do you guys have a handy query which I could run at Primary and Standby sites which will lists all important
    Data Guard related init parameters.
    Something like below but a query that list important Dataguard related init.ora parameters
    col name format a35
    col display_value forma a20
    set pages 25
    SELECT name, display_value FROM v$parameter WHERE name IN ('db_name',
    'db_block_size','undo_retention',
    'shared_servers',
    'memory_target','sessions',
    'processes',
    'session_cached_cursors',
    'sga_target',
    'pga_aggregate_target',
    'compatible',
    'open_cursors',
    'nls_date_format',
    'db_file_multiblock_read_count',
    'cpu_count',
    'cursor_sharing')ORDER BY name;

    Yes more parameters from Mseberg..
    Adding one more important parameter LOCAL_LISTENER which plays a big role in dataguard with RAC too..
    sys@ORCL> SELECT name, display_value FROM v$parameter WHERE name IN ('db_name','db_unique_name','log_archive_config','log_archive_dest_2','log_archive_dest_state_2','fal_client','fal_server','standby_
    file_management','standby_archive_dest','db_file_name_convert','log_file_name_convert','remote_login_passwordfile','local_listener') order by name;
    NAME                           DISPLAY_VALUE
    db_file_name_convert
    db_name                        orcl
    db_unique_name                 orcl
    fal_client
    fal_server
    local_listener
    log_archive_config
    log_archive_dest_2
    log_archive_dest_state_2       enable
    log_file_name_convert
    remote_login_passwordfile      EXCLUSIVE
    standby_archive_dest           %ORACLE_HOME%\RDBMS
    standby_file_management        MANUAL
    13 rows selected.
    sys@ORCL>

  • Reading system profile parameters programatically in ABAP

    Hi,
    Does anyone know how to read system profile parameters like icm/host_name_full using ABAP?
    Thanks in advance!
    Regards
    Erick

    You can use the following code to get the values.  Really it is just reading a file which is stored on the application server.
    report zrich_0001.
    types: begin of tpar,
           status type sy-index,
           name(60) type c,
           user_wert(60) type c,
           default_wert(60) type c,
           end of tpar.
    data: par_usub type table of tpar  with header line.
    data: par_sub  type table of tpar  with header line.
    call 'C_SAPGALLPARAM' id 'PAR_USUB' field par_usub-*sys*
                          id 'PAR_SUB'  field par_sub-*sys*.
    loop at par_usub.
      write:/ par_usub-name(30), par_usub-user_wert(20),
              par_usub-default_wert(20).
    endloop.
    Regards,
    RIch Heilman

Maybe you are looking for