Menu Connection Display Droputs

The menu bar display icon showing connection and time connected continually drops the time, slides the signal indicator to the right and then restores the time display. The signal strength remains constant at 3 of 4 bars and Internet Connect shows a connection exists. Any advice would be greatly appreciated.

Are you using layered menus? (Do you have the base layer checked to show?)
How are you making the menus?

Similar Messages

Menu/Toolbar Display Corruption Upon Resizing Window

We're experiencing an issue with one of our workstations where when the Adobe Reader X (10.1.3) window is resized, the Menu/Toolbar displays become corrupt and garbled on the screen (see the attached picture). The Toolbar appears on the top, the frame around the application disappears, and the menubar has to be hovered across for items to appear.
I have uninstalled and reinstalled Adobe Reader, updated the video card drivers, and ensured all Adobe/Microsoft updates have been applied to this workstation.
Dell Precision T3500
Intel Xeon W3530 (2.80 GHz)
6.00GB of Memory
NVIDIA Quadro FX 580
Windows 7 Ultimate x64

Was curious to how you were able to change the display resolution - I am unable to even see anything on my desktop... I have connected my power book to another monitor but have the same result.

TS5148 When I try to play a movie on Netflix from my IPad, I get a pop up saying: Cannot play video. "The connected display is not supported".

When I try to play a movie on Netflix from my IPad, I get a pop up saying: Cannot play video. "The connected display is not supported". I have updated my Apple TV, tried restarting it, and have tried using my IPod Touch all without any luck. This display has worked in the past. This just happen a couple days ago.
Any ideas out there?

I have been successfully using my Apple TV with my iPad2 to access Netflix through airplay (mirroring) and suddenly it won't work. It says "the connected display is not supported" What's up?
Also when I try to stream Netflix through my Apple TV menu on my television it says "An error occurred loading this content. Try again later. But trying again later doesn't work any better.
Now the only way I can watch Netflix is using my small iPad screen. It appears the problem is with streaming Netflix through my Apple TV

Need Help in installations and connecting displays. Please!

Hello Everyone,
Need Help in installations and connecting displays. Please!
Im planning on installing in a cafe shop : (Store Self improvement)
4 TV's (can be Built in Wi-Fi) Store menus
2 touch screen tablets. To be use as Emenu (digital Menu)
1 60' TV ( Built in Wi-Fi) as Entrainment displays and in store advertising
What do I need to organize my project and make it looks cool and how to manageand controll all of the displays TV.

TNSTAAFL
I DO NOT work for Best Buy, Geek Squad and any way affiliated with them. I am a self-employed repairman. I specialize in TV's and desktop computers. I do not take sides. If BB is wrong I will say so. If you are a moron with a false sense of entitlement, then I will tell you.

"Cannot play video - The Connected display is not supported" error message using Netflix 5.0.2 on my iPad

I'm running iOS 7.0.3 on my iPhone 4S and iPad (3rd gen) and have just upgraded to the current version of the Neflix app available in the Canadian App Store (5.0.2).
Although all other apps I've tried (e.g. Podcast, VLC) are able to properly output video & audio directly to my TV using the HDMI adapter (i.e. NOT via an Apple TV), the Netflix app pops up the error message "Cannot play video - The connected display is not supported". If I start a video and then plug the HDMI cable in, it will play for a few seconds and then halt with the same error message.
Netflix & Apple were supposed to have been working together to fix the previous issue with this scenario which was causing audio to be output but no video. The current Netflix app update was released yesterday and seems to have taken a step backward.
When I contacted Netflix support, they indicated that they have done whatever can be done from their side and this is now Apple's issue.
Any ideas?
Thanks!
Kiron

Hello all,
I have an iPad 2 16GB with iOS 7.0.3 and Netflix version 5.0.2. I cannot watch netflix on an External LCD monitor that I have through VGA out. I use bluetooth speakers, so the AirPlay is going to that for Audio. Before this update, this combo worked without an issue.
So as of Friday Nov. 8/2013, I contacted Netflix support, and they said they fixed the problem on their end, and the fix is on the Apple side of things, and to contact Apple support.
So, I contacted Apple support, and the first person I spoke to said I would have to agree to pay a $35 fee for 30 days of support to this problem since my unit is out of warranty. I said this isn't a hardware issue, it's a software issue, and I'm not willing to pay to fix a problem you created. So I got a Senior Level advisor on the line, and she was helpful, and she's looking into the issue for me and said she'll contact me sometime on Tuesday or Wednesday (Nov. 12 or 13) to let me know of the issue.
Here's the thing: this is a combination of Netflix and iOS not working correctly with any of the Apple Authorized Dongles. This is truly a code error that some hot shot programmer had major oversight on, and their management didn't catch it either. There was no reason for Netflix to rush to get this Netflix update going until Apple sorted out the bugs in iOS 7.
Anyway, if I hear anything from Donna (the advisor), I'll post it and let you guys know. In the mean time, good luck!

Creating a vertical dropdown menu that displays inline

I would like to change how my dropdown menu displays. First I'd like for it to dropdown directly underneath its menu item and in the process move the other links down. And remain visible until it is clicked again, thereby shifting other links back up.
Here is what I am trying to accomplish:
Main menu:
main link 1
main link 2
main link 3
main link 4
Then when user clicks on a link:
main link 1
   sub item
   sub item
   sub item
main link 2
main link 3
main link 4
And for it to remain displayed like the above until clicked again.
So in essence it could even look like this as a user is navigating:
main link 1
   sub item
   sub item
   sub item
main link 2
   sub item
   sub item
   sub item
main link 3
   sub item
   sub item
   sub item
main link 4
   sub item
   sub item
   sub item
And then each submenu disappear as its main link is clicked again.
Hope this makes sense and hope someone can help.
Thanks!
P.S. Im using Dreamweaver CS6

Bare bones example: (needs styling with css) (if you want a bit more of a smooth animation use - $(this).find('.sub_menu').slideToggle(); instead of $(this).find('.sub_menu').toggle(); in the jQuery script below highlighted in red
<!DOCTYPE HTML>
<html>
<head>
<meta charset="UTF-8">
<title>jQuery Drop Down Menu</title>
<style type="text/css">
ul {
margin:0;
padding:0;
list-style-type:none;
/* hide sub menu */
.sub_menu {
display: none;
    /* indent sub menu */
.sub_menu li {
padding-left: 10px;
        </style>
<script src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
<script type="text/javascript">
$(document).ready(function() {
$('.menu').click(function() {
$(this).find('.sub_menu').toggle();
</script>
</head>
<body>
<ul id="navigation">

<li class="menu"><a href="#">Menu 1</a>
<ul class="sub_menu">
<li><a href="#">Sub Navigation 1</a></li>
<li><a href="#">Sub Navigation 2</a></li>
<li><a href="#">Sub Navigation 3</a></li>
</ul>

</li>
<li class="menu"><a href="#">Menu 2</a>
<ul class="sub_menu">
<li><a href="#">Sub Navigation 1</a></li>
<li><a href="#">Sub Navigation 2</a></li>
<li><a href="#">Sub Navigation 3</a></li>
</ul>

    </li>
<li class="menu"><a href="#">Menu 3</a>
<ul class="sub_menu">
<li><a href="#">Sub Navigation 1</a></li>
<li><a href="#">Sub Navigation 2</a></li>
<li><a href="#">Sub Navigation 3</a></li>
</ul>
    </li>
</ul>
</body>
</html>

I have new IPad ...can't watch rented downloaded movie on my tv..error message is " The connected display is not authorized to play protected movies"... What is up with that???

I have new IPad ...can't watch rented downloaded movie on my tv..error message is " The connected display is not authorized to play protected movies"... What is up with that???

I had exact same problem and I have found a way to get round out!!!! Easy!
So the reason it doesn't allow it to play is for security to stop piracy etc.
Plug in the cable and VGA and aux cable and get everything set up so you are looking at the home screen.
1) select Videos
2) selected the film you want to watch
3) click the little play button
4) it will then come up with the message saying it can't play protected films blah blah blah
5) WITHOUT clicking ok double tap the home button to bring up the multitasking bar and swipe left to reveal the control panel
6) hold fast forward for a second or two and the movie with continue to play!
Stay in the multi tasking bar with the control panel, The message will stay there but don't worry. Kick back and enjoy your iPad movie on the big screen:)
I'm sure your saying thanks:) it was my pleasure realising I've outsmarted apples little security protection thing lol

HT204370 I get this after downloading: "The selected movie won't play on one of your connected displays." What do I do?

I get this after downloading a movie: "The selected movie won't play on one of your connected displays." What do I do?

I fixed it. I just had to unplug my second monitor and re-plug it in. All is better now.

Drop down list created by fireworks MX disappears behind Flash movie. Is there a way to have the menu list display front of Flash movie?

Drop down list created by fireworks MX disappears behind Flash movie. Is there a way to have the menu list displays in front of Flash movie, pls. let me know what I should do to have the drop down menue not disappear behind the Flash movie.
Thanks,
[email address removed by host]

Wrong forum... this is to discuss the operation of the forums, not products
You need a forum for Fireworks or Flash or maybe Dreamweaver
Go to the index at http://forums.adobe.com/index.jspa to find the correct forum for your question

Airport Extreme "Show Time Connected" Display

"SHOW TIME CONNECTED" problem
I have a relatively minor problem with my Airport Extreme. I have elected to have the “Show time connected” displayed in my menubar. For the last few months, and certainly since I upgraded to OS 10.7, the time connected display keeps resetting itself, sometimes actually back into negative time, showing as a negative time connected and gradually working its way up to zero. At other times it will seem to work accurately for a day or 2 and then reset itself back to 0.
This does not seem to affect my Airport Extreme function which does not disconnect or dysfunction. It seems that it is only the timer itself that keeps resetting itself. I know this is a minor issue but would be happy for any advice on how to correct it.
Thanks very much.

I ran OS 10.5 for 3 years with my Time Capsule and never saw a negative time. I recently updated to 10.6, but I don't think that that caused the problem, although I didn't check the apparent connected time on another computer.
"...only seems to affect a few users." is not a defense. Apple's job is to write software that always works, not that works mostly. I'm not sure that there would be a flood of reports. I think that most people don't turn this option on. It's an obscure setting (people ask where it is in other forum posts) and of little apparent value. I use it because it's the only reliable indicator that I am actually connected to the internet. I would not have upgraded the firmware on my TC except that the flashing yellow light (that I can't reset) made detecting other problems with the TC impossible.
I should also point out that on a recent trip I connected to a wi-fi router that does not support displaying the connected time. However, my computer continued to display the time that my TC had been connected when last it spoke to my computer. This does appear to be a 10.6 bug, as 10.5 never did this.

Menu Icons Display Strange

All my disabled buttons appear like this where they are gray. What can I do to fix this or what would cause them not appearing correctly?
Thanks!

Here are my System Specs
Dell Latitude E6500
Windows XP Pro Service Pack 3. 32 bit
Intel Core 2 Duo 2.66 Ghz
NVIDIA Quadro NVS 160M
The buttons seem to work fine, they just look all grayed out when they can't be selected.
Thanks for your help.
Alan Wayman [email protected]
Date: Thu, 10 Sep 2009 14:58:40 -0600
From: [email protected]
To: [email protected]
Subject: Menu Icons Display Strange
Hi again
Hmmm, new install. Aside from the funky icons does it seem to function?
What is your operating system? Vista, Windows 7, Windows XP and how many bits? 32 or 64.
Note that Adobe has no version of Captivate that has been blessed and purported to run flawlessly on 64 bit systems. We are seeing more and more folks arrive here that are using 64 bit systems and citing all manner of issues. Mostly surrounding capture and audio.
Cheers... Rick
| http://www.robowizard.com/pc.gif | Helpful and Handy Links
http://www.Adobe.com/cfusion/mmform/index.cfm?name=wishform&product=5
http://www.ShowMeSolutions.biz
http://sorcererstone.wordpress.com/
http://www.gooberguides.com |
>

Horizontal Menu Not Displaying Right in IE (Shocker!)

Can someone look and see why my menu wont display correctly in IE. I've used the same feature on other sights with no problems. I may have jacked up the code when tweaking the design. Any help would be appreciated. Cheers.
www.brand32.com/Evoke
I'll be happy to add code if needed.

Here is the CSS. Hopefully this will elicit some response. Thanks in advance for those who reply.
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
margin: 0px 0 0 0px;
padding: 38px 0;
list-style-type: none;
font-size: 100%;
cursor: default;
width: auto;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
position: relative;
text-align: left;
cursor: pointer;
float: left;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
z-index: 1020;
cursor: default;
width: 8.2em;
position: absolute;
left: -1000em;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
width: 8.2em;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
position: absolute;
margin: -5% 0 0 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
left: auto;
top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
background-color: #300607;
border: 0px solid #CCC;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
display: block;
cursor: pointer;
padding: 0.5em 0.75em;
color: #fff;
text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
color: #FFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
color: #FFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
background-repeat: no-repeat;
background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
position: absolute;
z-index: 1010;
filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
display: inline;
f\loat: left;
background: #FFF;

Since 10.8.5 an external connected display has problems

Hi there,
since my Update to 10.8.5 an external connected display via miniDisplayport to HDMI (or DVI) makes problems. If i turn on the display and the macbook (cold start), everything is working fine. But when i turn off the monitor or close the lid of the macbook and return later, he won't recognize the external display anymore. If i connect via HDMI, i have glitches all over the external display and then it turns black. If i connect via DVI, the external display stays black. Mac OS X doenst shows me an external connected display in the settings..
Does anyone else have this problem?
If i restart the Macbook, all is working fine again...

Apple support article.
Video Troubleshooting Internal and External Monitors

Menu parameter, display text and filter by ID

Is it possible with a parameter of type menu to display the text that has meaning to the user
But when filtering in my query send the ID's of the items the user selected in the menu?
For example I have a catalog with 50 reason descriptions in my DB, every reason description has an ID
So I display the 50 reason descriptions so that the user selects whatever he wants
When he runs the report how can I get the ID's of the reason descriptions he selected?
Thanks and Regards

for All option:
select description, id from table
union all
select "All", -999 from dual
in the query SQL:
where
colum1 = decode(:parameter1,-999,colum1,:parameter1)
for Multiple selection:
colum1 in (decode(:parameter1,-999,colum1,:parameter1) )
example to create a report:
1.create a list:
select rownum || '-' || t.tname tname, rownum tnum from tab t
union all
select 'All' tname, -999 tnum from dual
order by tnum
2. create a parameter using above list
3. create a data model with following sql:
select rownum || '-' || t.tname tname, rownum tnum from tab t
where rownum in ( decode(:PM_doc_id,-999,rownum,:PM_doc_id))
4. generate the layout
5.view this report to verify it.

Is there any way to edit the standard Firefox context menu for displayed Web pages?

Is there any way to edit the standard Firefox context menu for displayed Web pages? I frequently want to save a picture appearing on a page. Sometimes I "slip" and hit "Send Image" when I want "Save Image As", and have to sit and wait for a default send-mail page to come up, then close it, fiddling with its "are you sure" dialogs. This is a painful way to handle a slip-up. I basically NEVER want to e-mail an element directly from a page. Is there any way I can just delete "Send Image" from the context menu?

You can remove entries in the context menu with code in the userChrome.css file
*http://kb.mozillazine.org/userChrome.css
Some IDs are listed in this MozillaZine Knowledge Base article:
*http://kb.mozillazine.org/Chrome_element_names_and_IDs
To find the ID of others you will have to use the DOM Inspector.
* https://support.mozilla.org/kb/DOM+Inspector
* https://developer.mozilla.org/En/DOM_Inspector
* https://developer.mozilla.org/en/Introduction_to_DOM_Inspector
* DOM Inspector: https://addons.mozilla.org/firefox/addon/dom-inspector-6622/

Menu Connection Display Droputs

Similar Messages

Maybe you are looking for