Menu Language Change AppleWorks 6

Hi,
I run eMac and iBook, both g4 os x 10.3.9 Spanish setted
On eMac AppleWorks runs in Spanish, as it should following international preferences options.
But, iBook with same preferences setting, same os x. AppleWorks runs in English. I cannot find the way to get it to run in Spanish.
Any ideas?

Welcome to Apple Discussions Matias
AppleWorks is not a multi-lingual program like TextEdit (included with OS X). It is actually an OS 8/9 program that was carbonized to run in OS X & it comes in many different language versions. To use a different language in AppleWorks, you need to install that version. If your iBook is fairly new & came with an Install DVD, you can install the Spanish version of AppleWorks. Insert the Install DVD, double-click on the install bundled software icon, click the arrow/triangle (if necessary) next to AppleWorks at the bottom of the list, check the box for the language you want, click Install (I think) & follow the directions.
Peggy

Similar Messages

  • Acrobat menu language changed to Korean

    Acrobat started up fine this morning, but all the menus are in Korean.  Since I can't understand what they say, I can't figure out where to 'click' to change the language back to US English. 
    Any help will be appreciated.

    Hey L.R.Cote,
    You might go to "Edit > Preferences> Language" and choose English under Application Language label.
    Now close Acrobat and launch it again.
    Let me know.
    Regards,
    Anubha

  • Firefox 4 -- just downloaded and menu & top bars are in some strange language - not english. I can't seem to get to a tools menu to change the language because I can't read the top menu.

    Just downloaded Firefox4 and can't read the top line menu because it's in some strange language with symbols instead of letters. How do I get it to display English in the top line menu?
    If I could read the menu, I'd go to tools and see if there were an option to change the menu language, but since I can't read the menu choices, I'd only be pushing meaningless buttons.
    [email protected]

    Thanks. I tried it and get the attached screen. I don't see anything which lets me change the language in the menu.
    Before I give up completely & just stick with Chrome or IE, I'll bring my laptop which has a correctly configured version of firefox 4 side by side with my desktop & use it as a template for clicking on the correct gibberish lines. I still don't see an option for changing menu bar language, but I'll search around a bit.
    It would help if I could get phone contact with someone at Mozilla, but they don't seem to list a phone number on their help page ----
    Alan Taplow
    844 John Fowler Road
    Plainfield VT 05667
    802-454-4675 Cell: 813-230-3940 [email protected]

  • Change the WebApp menu language to English

    Hi,<o:p></o:p>
    From some reason all of the menu language (when preview a document for example and click the bottom menu) shows in French. how can i change it to English?<o:p></o:p>
    Thanks a lot in advance<o:p></o:p>

    Hi,
    try the regional settings
    https://support.office.microsoft.com/en-nz/article/Change-regional-settings-for-a-site-e9e189c7-16e3-45d3-a090-770be6e83c1a
    Kind Regards,
    John Naguib
    Senior Consultant
    John Naguib Blog
    John Naguib Twitter
    Please remember to mark this as answered if it helped you

  • Changing the menu language

    i bought a new deskjet ink advantage 2645
    one of the kids changed somehow the menu language
    how can i revert to the factory settings regarding language or specifically to english ??
    your help would be greatly appreciated
    erez kazes

    Hello erez kazes, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing language issues.  I would like to help.
    From your home menu, hit the down arrow eight times, then press OK. Press OK again, and select english. 
    Please let me know if you have any questions.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Change Menu Language to English?

    Hello! My hubby bought me a Nokia 7373 as a gift - we are currently located in Germany. When I put my sim card in the phone, the menu displayed in German _ is there a way to change the menu language to english??

    You are going to have to find your way through the menus (sorry, I speak no Spanish):
    -Menu
    -Settings (spanner icon)
    -Phone (phone and spanner together icon)
    -Language settings
    -Phone Language
    You will probably find it set to 'Automatic', simply choose English from this list.

  • Cannot change menu language on severals computers i your compagny

    on severals computers in your company, even if we choose french or deutsch on start program, the menu bar stay in english (on user environement). on administrator environement no problem

    Cloud language change http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html

  • I need more INPUT (not MENU) languages in my E90!

    Though E90 Communicator is awesome in majority of functions, usability and comparatively perfect in production quality, it lacks some features that I as business-user definitely need.
    The most disappointing issue for me is the language issue. While the "normal" phones have 6 to 8 languages pro firmware/product code, the E90 has only 3!!! (Maybe 4 in APAC region but i do not care.)
    I'll try to explain shortly. As a businessman who lives in Germany and is a native Russian-speaker, I have a LOT of partners/clients/friends who do prefer to have a communication profile with me in Russian. I have almost the same amount of people with whom I need to communicate in German or French. The tragic truth is that I cannot approach this with the actual firmware situation on E90.
    If I would buy my Nokia E90 in Russia, I would get the predefined languages of English, Russian and Ukrainian. That is nice, but in this case I cannot write in German as it should be written, saying with Ö, Ä, Ü, ß and so on. I also could not use some of the French special characters. If I would use E90 only as a SMS machine, it might be OK. But I use it more likely as a travel PC replacement the device pretend to be, so I use e-mail and document editing, where the lack of those characters are intolerable.
    Besides all, I live in Germany and am a client of German service provider, so why should I probably buy the device outside of Germany? So think I and so I doing, saying I renewed my service contract and bought the E90.
    In German firmware I got another three (!!!) languages: German, English and Turkish. Wonderful. I may speak out about the pure discrimination from the Nokia side: in Germany we have the same amount of Russian speakers as Turkish fellow ones, both about 8,000,000 persons each. ;-) So why Turkish and not Russian, Italian or French? Every of those "communities" has equal rights, am I right?! Hei, Nokia! Do you hear my voice?!
    Is it really so hard to understand, that an ULTIMATE BUSINESS SOLUTION as E90 definitely would be preferred by the people, who really use it - really intensive - as a communication device?! Is it really hard to understand, that thousands of them would get e-mails and documents while on the road that definitely need to be urgent answered some other language than 3 preinstalled?! Should I change the firmware of my phone every time I need to answer e-mail in French or edit the financial contract for my Russian partner?!
    Ridiculous and disappointing - what else should I say?! Especially because I know, that the situation as easy to fix from the Nokia side as a single mouse click.
    I am sure there are people reading and writing to this Forum who needs for example Chinese Mandarin and German, or Hindi and Farsi, or Arabic and Spanish simultaniously. There is no way to understand why it is impossible to choose the INPUT languages - I do NOT speak about the MENU languages and never pretend to.
    So, because this Forum is Nokia's piece of land and Nokia has kindly allowed us to cry out here what I do really appreciate, I want definitely get the answer to following questions:
    1) Is it possible to add some INPUT (once again - NOT menu, just INPUT) languages to E90 firmware?
    2) If yes, when?
    3) If not, what is the reason? The reason - please, no "technical excuses", because I am not that stupid, OK? ;-)
    We are living in such a damn globalized world, aren't we? So let's be really globalized and let's help us ourselves to get out the most from this.
    Thanks to all for listening.

    Since Windows 98 is absolutely not a problem to add ANY input language in ANY localized version of the OS. I do know that Symbian OS has at least the same flexibility options.
    Once again: I do not pretend to have any other MENU language - I simply do not need it. But the possibility to choose more INPUT language is simply and quickly to add, that is what I am asking for.
    Maybe your statistic research is right, I do not want to argue with you. More than that, this is exactly I expected as an excuse option: "Marginal request". But no, it is not. The device would probably have higher customer interest when the free input would be represented.
    Your advice to use laptop instead of E90 is highly appreciated, but it is not unique enough to be accepted "as is". ;-) The idea of E90 as well as previous communicators was to give the customer an option to leave her/his laptop at home and make a 1 or 2 day business trip as lite as possible in every meaning of the word "lite". I have 2 laptops already, 1 Panasonic for traveling and IBM Z61p Workstation as a desktop replacement. I should say that Panasonic, while being one of the best travel-oriented devices on the market, with its almost 2 Kilo travel weight and about 1 minute power-up/power-down time is completely insufficient as a communicator replacement. In addition to it you need a businesscard-scanner and a digicam, you are constantly out of power and so on. It is or will be the same story with UMPC. The only option until now was HTC/Qtek 9000, the most powerful and well-equipped device on the market. But it is completely useless as a phone and its camera is a disaster, so I switched to E90 because of its awesome usability as a phone, a digicam and as a communicator simultaneously just because I HATE to carry on 12 hours a day here and there a 5 Kilo bag with laptop, phone, camera, cables, batteries and other damned stuff around. I am just SICK and TIRED of this and I dreamed about the device that can make free from all that - for YEARS!!!
    I remember my conversation with Nokia people at its CeBIT Stand in late 1990-es - the concept was already here, but the materialization of my dreams took Nokia R&D almost a decade. And now, when it is already in my hands, it lacks such a damn little thing to be as perfect as possible! ;-)
    I am not that crazy - "perfect" does not mean really perfect. Of course there are and there would be minor and major bugs with later fixes and improvements. Because of the possibility of fixes and improvements I insist on one of the most critical for me. I understand as well, that it needs neither additional research nor hardware changes. All you need to to do is a little software module to be added and/or replaced. The Occam Razor Rule is still in my mind. ;-)

  • Microsoft Word 2008 top menu bar changed to chinese - ISSUE

    After opening a MSfile the Leopard top menu when using Microsoft Word 2008 has been changed to Chinesse. This issue only happen with this product and not with the rest of the Microsoft tools that I have installed in my MacBook (example: Powerpoint). I'm including a print screen (as you can see only the iOS menu is changed to chinesse and not the software menu). I extremely need to change it back to English!
    Thanks for any information and advice that you could provide

    Never heard of something like that. AFAIK, Office 2008 distributions do not contain localisation resources, so there would be no way for (US) Word to display menus in Chinese. Maybe you have a multi-lingual version? Check what's available in the Microsoft Language Register, although I was under the impression that it did not affect menu display. And… are you sure it's Word 2008 and not 2011?
    Btw, an unrelated issue. Did you recently open a Word doc having to do with Tibet?

  • Keyboard language changed only in Firefox not other programmes

    I have Firefox in English but I use a Spanish keyboard, meaning some keys like question marks or quotation marks are in different places, there are accents, a key for ç, etc. It has always worked normally but today, while the keyboard is working correctly with all other programmes in Firefox it works as if the settings were changed to an English (I think) keyboard.
    I don't have that problem with Chrome though, it's just Firefox. How is that possible (add question mark here, I can't guess what key I'im supposed to use for it).
    I haven't changed anything in the settings, so the only possibility could be some kind of shortcut I've accidentally pressed, even though I don't know how that's even possible, as I assumed you can't have several keyboard language settings selected at the same time depending on the programme you're using.
    I type in different languages so this is terribly annoying! Thanks for any help.

    It is possible that you have switched the keyboard layout by accident by using the key sequence to rotate the layout.
    * http://support.microsoft.com/kb/258824 - How to change your keyboard layout
    Windows remembers the keyboard layout setting per application and you may have changed the keyboard layout by accident via a keyboard shortcut.
    * http://support.microsoft.com/kb/306993 - HOW TO: Use the Language Bar in Windows XP
    * http://windows.microsoft.com/en-US/windows7/The-Language-bar-overview The Language bar (overview)
    Make sure that you have the Language bar visible on the Windows Taskbar
    * You can do that via the right-click context menu of the Taskbar: Toolbars > Language Bar
    * Check the keyboard language (keyboard layout) setting for the application that has focus via the icon on the Language bar
    * You need to do that while Firefox has focus because Windows remembers the keyboard layout setting per application
    * The default key combination to rotate the layout is the Ctrl+Shift or Alt+Shift combination that is used in Firefox for menu items, so it is quite possible to change the layout accidentally.
    * To avoid an unintentional switch, assign a specific key sequence (Alt/Ctrl+Shift+number) to select keyboard layouts and remove the key combination to rotate layouts (Alt+Shift or Ctrl+Shift)
    * Control Panel > Regional and Language Options > Keyboards and Languages > Change keyboards > Advanced key settings > Change key sequence

  • Language change makes me unable to log on my Macbook!

    Hi guys,
    So yesterday I changed my language from English to Vietnamese. My computer went on sleep. When I tried to log on, it didn't show up the dots(for the password field). I'm thinking the language change has messed up the keyboards! Could anyone tell me how to fix the problem? I really need to log on my computer as soon as possible. Thank you so much.
    By the way, I changed the language to Vietnamese VNI.

    Hopefully we can get Tom or others in here to help.
    Does it boot into any of these modes?
    Holding Option/alt key at bootup.
    Holding SHIFT key at bootup.
    Target mode...
    http://support.apple.com/kb/HT1661
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214
    We might get clues with verbose mode...
    http://support.apple.com/kb/HT1492
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Reset Password from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Reset Password.
    Or do you have Firmware password protection in Mac OS X ...
    http://support.apple.com/kb/HT1352
    It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option, and Shift, as well as booting from anything but the Hard Drive.
    Force Removing Password Protection
    1) Add or remove DIMMs to change the total amount of RAM in the computer.
    2) Then, the PRAM must be reset 3 times. (Command + Option + P + R).
    http://www.securemac.com/openfirmwarepasswordprotection.php

  • Language changed to Dutch and i can't get it bck t...

    I changed my sim card on Nokia E52 and the languag changed automatically to dutch. and i can't return it back to english although i've chose english as my first language in settings.
    Please help

    ''david.abel wrote:''
    On the Firefox home page, the Arabic language has suddenly started to appear
    Is the language for the menus and other user interface elements still English? If so,
    # Click the ≡ Menu Button and choose Preferences.
    # Click the Content icon.
    # Below Languages, click the Choose button.
    # Make sure a specific variant of English like ''en-us'' is at the top, followed by ''en''. Remove any unwanted languages as well.
    [[Settings for fonts, languages, pop-ups, images and JavaScript|Settings for fonts, languages and pop-ups]]
    ''david.abel wrote:''
    Also, my browser history has started to take up part of the screen.
    I don't know what you mean by that. Please attach a screenshot.
    * [[How do I create a screenshot of my problem?]]

  • Get Keyboard language changes... Is it possible?

    Hi there,
    I was developing a command line app which runs in background, but i found some difficulties related to keyboard language...
    I need to know when the user changes the keyboard language (with international menu).
    I tried with TISCopyCurrentKeyboardInputSource() defined in Carbon.h, but it always returns the same keyboard language when my app runs in bg.
    What i need now is a command line app which run in bg and write to a file each language change... Is it possible???
    Thanks!!, and please help

    Hi,
    my app is not a key logger, and it does not run exactly in background. What i mean is that it runs into a while(true). My objective is to detect the changes of language and register it, and use this information in other external app. When i launch the function stand alone (not into a loop), it works perfectly, but when it runs into a loop, it always return the same language...
    Does Carbon have any special environment? Perhaps there are some incompatibilities when running Carbon TIS in command line applications...
    Thanks!

  • Language changed to russian

    I am using iTunes 11 on Windows 7. I installed the English version of iTunes. It worked fine for a couple of days but suddenly the language changed to Russian or another similar language. Can't really say what language it was since I don't know it. I uninstalled, cleaned up the registry and reinstalled iTunes but surprisingly the language was still not English.
    Any idea what the reason can be?
    Thank you.

    Well I eventually found the English on the drop down menu on the General Preferences tab and changed the language back to English. But nevertheless, I find it very strange that the language changed with no reason.
    I don't think the installation was corrupted since it worked for a couple of days after the install without any issue. I synced my phone, listened to music and updated the apps without any problem. A reinstallation didn't solve the problem. So I uninstalled all Apple related software and cleaned the install folders and configuration files on the harddrive as much as I could and cleaned up the Windows registry. However, after a clean reinstallation of the English version of iTunes, the language still remained the same non-English language. So there must have been a configuration file some where left on the harddrive. But isn't strange that the existing configuration file was not overwritten by the new installation? I tried the same installation with another user account on the same computer and the language was not English.

  • I got a Macbook Air. My system language is russian but the login password is english. I pu the laptop into sleep mode, then wanted to log in again, but the language seems to have switched to russian, there's no language change button! How do I log in now?

    I got a Macbook Air. My system language is russian but the login password is english. I put the laptop into sleep mode, then wanted to log in again, but the language seems to have switched to russian, there's no language change button! How do I log in now?

    Severia,
    I tried your solution, but it did not work with my laptop. After I restart the laptop, the language does not change and I cannot type the password in English language. Do you have any other suggestion?
    Thank you.

Maybe you are looking for