Menus for Links

Hi Guys,
I am trying do menus on the link to a certain columns, can anybody please let me know for suggest some tutorial guide for doing this.
My Scenario
I have a quote number column and when the user click it should pull out 2 menus like----Quote Details and Quote Approve/Reject...
and the user click on any of them should be able to go to the sub-report or to a Sieble application.
I think Javascript needs to be used, just need pointer to do this quickly.
Thanks all for the help
Regards
Amit

This can be accomplished using Action Links. Enable Value Interaction for the column and create 2 Action Links as below
- One link must Navigate To BI Content i.e an existing report
- Another link to an external URL
[Assuming you are using OBI EE 11g]

Similar Messages

  • I don't have any drop down menus for burning playlist to disc

    I had a computer crash and reinstalled itunes. Everything works except the burner. I dont have any drop down menus for burning the playlists to disc. What do I do now?

    It has something to do with Segoe fonts in your Windows system.
    Refer to this link from itunesTRK for solution on windows 7:
    https://discussions.apple.com/thread/3782135

  • Context menu hotkey to open in new tab is different for links (T) & bookmarks (W); using T for bookmark deletes bookmark!--why?

    When I want to open a link in a new tab, I right-click and press T. I ''think'' that the same key used to work for opening bookmarks in new tabs, also. At least I developed a reflex that always chose T for a new tab, whatever I was right-clicking on. Then a while ago, probably after one of the updates I automatically install (some time in version 3.x), I started noticing something different and extremely frustrating: not only is the hotkey for opening bookmarks in new tabs now different (W instead of T), which is just poor design--but to add injury to insult, when my still-stubborn reflexes pressed T, the bookmark was ''deleted''. Gone. I have thousands of bookmarks, and I make them so I don't have to remember things. If one is lost, there may be no finding the page again.
    EDITED:
    Having posted this problem, I just realized that I've answered the why-it-happens part of the question. We're left with the why-was-it-allowed-to happen, but that's unimportant if we can put an end to the confusing behavior.
    T in the bookmark panel and menus is Cut, which is standard in all kinds of software, and that my lost bookmarks could be restored IF I remembered to paste them again immediately. (I swear I checked it out just before originally posting, and Cut didn't appear, though Copy did. Maybe I was hallucinating.) Anyway, knowing this will help with the long-term problem, but it's still a bad idea to have two different hotkeys for the same operation. Hence what needs to change is using T as the hotkey in the links context menu.
    Here's my proposal: Change the hotkeys for "Open in new window" and "Open in new tab" in both the right-click menu for links and the right-click menu for bookmarks. Right now we have:
    Links
    * Open Link in New Tab (T)
    * Open Link in New Window (W)
    Bookmarks
    * Open Link in New Tab (W)
    * Open Link in New Window (N)
    N0te that the bookmarks menu is mnemonically backwards; Window should be W. Both menus should be:
    * Open Link in New Tab (N)
    * Open Link in New Window (W)
    Can someone take care of this in an update, please?

    This also drives me nuts, I work in research online and use firefox as its tabbed browing is so good, and I ofetn have to open lots of links in rapid succession from web-pages - obviously I use right click T as the fasterst method of doing this, and I use it so ofetn that it is now a reflex.
    But, whenever I try to open a bookmark from my toolbar (much less often) I tend to deletye it, and if I am lucky enough to notice before I do anything else I have to go through a laborious process to undo the delete...
    Interesting to read the reason above, but I would suggest that this is something that needs to be standardised across all of a browser's context menus, otherwise browsing becomes jarring.
    I am all in favour of 'T' opening in a new tab from all context menus, but if this is not do-able I think you should consider picking a different letter. The N & W proposal above is good.
    Thanks!

  • Are there any responsive menus for mobile in BC?

    Hi folks, I've created mobile/responsive menus in DW but not dynamic ones, so I'm not sure how to do CSS for the non static content, or to address the menu specifically. I know you can govern your menu with custom css, but I'm  nt sure how to write it for my menus.  Anyone have examples/extensions that allow for button style drop menus for mobile like linked in or facebook?
    Looking for  a starting place for the mobile templates..
    TIA,
    Jeff

    Network Service provider in Nepal
    http://en.wikipedia.org/wiki/Network_Service_Providers_in_Nepal

  • Disabling Right Click Menus for Network Magic's System Tray Icons for Standard and Guest Accounts

    OK, so I want to know how to disable the right click menus for Network Magic's system tray icons only for Vista's standard and Guest accounts?   I don't want other users signed in as a Standard account or guest account having the ability to disable the system tray icons for network magic.

    Hi, currently it's not possible to disable NM from being accessed by a Limited user account, but that is a good idea.
    My Cisco Network Magic Configuration:
    Router: D-Link WBR-2310 A1 FW:1.04, connected to Comcast High Speed Internet
    Desktop, iMac: NM is on the Windows Partition, using Boot camp to access Windows, Windows 7 Pro 32-bit RTM, Broadcom Wireless N Card, McAfee Personal Firewall 2009,
    Mac Partition of the iMac is using Mac OS X 10.6.1 Snow Leopard
    Laptop: Windows XP Pro SP3, Intel PRO/Wireless 2200BG, McAfee Personal Firewall 2008
    Please note that though I am a beta tester for Network Magic, I am not a employee of Linksys/Cisco and am volunteering my time here to help other NM users.

  • Canned Buttons for Links

    I want to use buttons for Links but don't want to try to create them myself.  Where can I find stock Buttons with script that I can drop into my html and css?
    I want a series of vertical buttons that might look something like this:
    I will stack them vertically in a non-scrolling Sidebar on the left side of the page.  Thanks.
    jds

    Using images for navigation menus (other than backgrounds) is not an ideal scenario for a lot of usability and maintenance reasons.  The biggest drawback is that each time your site changes, you have to re-craft a whole new set of images for the various link states (ick!). 
    My advice is to stick with HTML unordered lists <ul> <li> for site menus. 
    Example:
    <ul id="navigation">
    <li class="home">Home</a></li>
    <li class="about">About</a></li>
    <li class="search">Search</a></li>
    <li class="photos">Photos</a></li>
    <li class="contact">Contact</a></li>
    </ul>
    With the power of CSS you can style your navigation lists to look like buttons. 
    http://css.maxdesign.com.au/listamatic/vertical13.htm
    With CSS3 transform and IE filters, you can rotate them.
    http://davidwalsh.name/css-transform-rotate
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • ANN: Flash navigation menus for Dreamweaver

    WebAssist is proud to announce the release of FlashNav Menus,
    a collection
    of 9 search-engine friendly, Flash menus for Dreamweaver.
    FlashNav Menus
    were developed by master Flash programmer Dmitry Molchanov of
    f-source.com
    and combine easy to modify and search engine compatible HTML
    links with
    animated Flash menus.
    FlashNav Menus are $94.99.
    For more information, visit:
    http://www.webassist.com/professional/products/productdetails.asp?PID=124
    Best - Joe
    Joseph Lowery
    Vice President of Marketing, WebAssist
    Author, Dreamweaver 8 Bible

    carl wrote:
    > would you suggest to install the updater - without
    giving you any
    > responsibility for whatever you recommend
    The only problems that I am aware of with the updater are
    these:
    * Some third party extensions currently don't work with
    Dreamweaver 8.0.2.
    * The Test SQL Statement panel doesn't render correct results
    for MySQL
    functions.
    * The recordset dialog box strips out the MySQL CONCAT()
    function from
    SQL queries.
    Item 1 isn't a major concern to me, as I rarely use the
    extensions
    affected (mainly MX Kollection 3 and extensions created by
    Tom Muck).
    Items 2 and 3 do concern me, but since I'm aware of them, I
    can easily
    work around them.
    I have installed the 8.0.2 updater, and don't have any plans
    to
    uninstall at the moment. The changes to the server behaviors
    improve
    security, so that's an important reason to update. On the
    other hand, if
    you rely heavily on extensions created by InterAKT or Tom
    Muck, you may
    be better off waiting until they have updated their products,
    too.
    David Powers
    Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
    Author, "Foundation PHP 5 for Flash" (friends of ED)
    http://foundationphp.com/

  • Classical Report for linking/applying the goods receipts transaction

    Classical Report for linking/applying the goods receipts transaction quantities against oldest schedule line item dates and then downloading the file to Excel.
    o        Classical Interactive Reports for calculating average Day Payable Outstanding. Option 1) in summary by company code, vendor, currency. (w/ DPO calc) Option 2) in detail (w/o DPO calc) Option 3) special summary by vendor and roughly convert different currency into one currency of choice, using current YEARLY rate.
    thow to do these objects
    plz assist me
    and how to transfer the data from from one server to other like 3.1 to 5.0
    plz assist me
    Edited by: Alvaro Tejada Galindo on Feb 21, 2008 5:28 PM

    Hi,
    You can use Call Transcation tcode
    for calling the transaction u can pass values to the transaction by using SET PARAMETER ID and GET PARAMETER ID
    technique.
    For downloading use function module LIST_DOWNLOAD
    or GUI_DOWNLOAD.

  • Sharepoint 2013 - Search for link names on a single page

    Hi
    I am messing around with SP13 and trying to get my search result web part to only search for link names and display all results.
    I have created the search source to point at the sub site. If I search for part of a link name it will list all links in one long row as a single result.
    Example: One single page contains all links. Each link points to a .aspx page. The search source is pointing at this page and it can display results but only as a single result containing all links as one line of text.
    Say I have 1000+ links of which 50 has names such as Link1-Item1-Basket1, Link1-Item1-Basket2 up to Link1-Item1-Basket50.
    When I search for Link1-Item1 I would like my search results to display 50 results as 50 individual links.
    Is this possible?

    Hi,
    Yes, you can format the search results as you expected.  But you have to create a custom display template to format your results such as extract the links from each results and display it as separate link.
    Once display template created you have to map the display template to your search results web part.
    Please refer to the following articles.
    SharePoint 2013 Customize Display Template for Content By Search Web
    Part (CSWP) Part-1
    Introduction to SharePoint 2013 Display Templates
    Display Template Overview
    Please mark it answered, if your problem resolved.

  • I have a Windows 8.1 machine.  I used a projecteor a while back in a Power Point presentation.  Now my menus for Adobe are very small and hard to read.  The print command is so compressed that I cannot read or use it.  How do I fix this problem?

    I used a projecteor a while back in a Power Point presentation.  Now my menus for Adobe are very small and hard to read.  The print command is so compressed that I cannot read or use it.  How do I fix this problem?

    There is no application called "Adobe" - you are either working with Adobe Acrobat or the free Adobe Reader. Open up the preferences for the application (Edit>Preferences), then go to the "General" category and modify the settings for "Scale for screen resolution". You will have to restart the application after you do that. Does that fix your problems?

  • "not a valid location for linked resource" in Flash Builder 4.7

    Hi,
    I'm constantly running into the problem, that Flash Builder simply won't let one create a linked resource that points to a location on the same drive?
    I'm getting the infamous
    "...not a valid location for linked resource..."
    error message.
    I'm using FB 4.7 with Flash Professional CC.
    Is that supposed to work at all?
    I've 1 workspace where I've successfully created a linked resouce - but it fails for all others. Even when I'm setting up a new WS.
    And it's totally unclear to me why it had worked there but not in all others that I'm trying to create.
    André

    A year later, but I'm facing the same bug.
    If your ever found a solution I'd be glad to hear.
    I filed a bug with more details and my own workaround: 
      3697022

  • The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server ...

    Our setup is that we have two databases; a SQL Server 2008 database and an Oracle database (11g). I've got the oracle MTS stuff installed and the Oracle MTS Recovery Service is running. I have DTC configured to allow distributed transactions. All access to the Oracle tables takes place via views in the SQL Server database that go against Oracle tables in the linked server.
    (With regard to DTC config: Checked-> Network DTC Access, Allow Remote Clients, Allow Inbound, Allow Outbound, Mutual Authentication (tried all 3 options), Enable XA Transactions and Enable SNA LU 6.2 Transactions. DTC logs in as NT AUTHORITY\NetworkService)
    Our app is an ASP.NET MVC 4.0 app that calls into a number of WCF services to perform database work. Currently the web app and the WCF service share the same app pool (not sure if it's relevant, but just in case...)
    Some of our services are transactional, others are not.
    Each WCF service that is transactional has the following attribute on its interface:
    [ServiceContract(SessionMode=SessionMode.Required)]
    and the following attribute on the method signatures in the interface:
    [TransactionFlow(TransactionFlowOption.Allowed)]
    and the following attribute on every method implementations:
    [OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete = true)]
    In my data access layer, all the transactional methods are set up as follows:
    using (IDbConnection conn = DbTools.GetConnection(_configStr, _connStr))
    using (IDbCommand cmd = DbTools.GetCommand(conn, "SET XACT_ABORT ON"))
    cmd.ExecuteNonQuery();
    using (IDbCommand cmd = DbTools.GetCommand(conn, sql))
    ... Perform actual database work ...
    Services that are transactional call transactional DAL code. The idea was to keep the stuff that needs to be transactional (a few cases) separate from the stuff that doesn't need to be transactional (~95% of the cases).
    There ought not be cases where transactional and non-transactional WCF methods are called from within a transaction (though I haven't verified this and this may be the cause of my problems. I'm not sure, which is part of why I'm asking here.)
    As I mentioned before, in most cases, this all works fine.
    Periodically, and I cannot identify what initiates it, I start getting errors. And once they start, pretty much everything starts failing for a while. Eventually things start working again. Not sure why... This is all in a test environment with a single user.
    Sometimes the error is:
    Unable to start a nested transaction for OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLSERVERNAME". A nested transaction was required because the XACT_ABORT option was set to OFF.
    This message, I'm guessing is happening when I have non-transactional stuff within transactions, as I'm not setting XACT_ABORT in the non-transactional code (that's totally doable, if that will fix my issue).
    Most often, however, the error is this:
    System.Data.SqlClient.SqlException (0x80131904): The operation could not be performed because OLE DB provider "OraOLEDB.Oracle" for linked server "ORACLSERVERNAME" was unable to begin a distributed transaction.
    Now, originally we only had transactions on SQL Server tables and that all worked fine. It wasn't until we added transaction support for some of the Oracle tables that things started failing. I know the Oracle transactions work. And as I said, most of the time, everything is just hunky dorey and then sometimes it starts failing and keeps failing for a while until it decides to stop failing and then it all works again.
    I noticed that our transactions didn't seem to have a DistributedIdentifier set, so I added the EnsureDistributed() method from this blog post: http://www.make-awesome.com/2010/04/forcibly-creating-a-distributed-net-transaction/
    Instead of a hardcoded Guid (which seemed to cause a lot of problems), I have it generating a new Guid for each transaction and that seems to work, but it has not fixed my problem. I'm wondering if the lack of a DistribuedIdentifier is indicative of some other underlying problem. I've never dealt with an environment quite like this before, so I'm not sure what is "normal".
    I've also noticed that the DistributedIdentifier doesn't get passed to WCF. From the client, I have a DistributedIdentifier and a LocalIdentifier in Transaction.Current.TransactionInformation. In the WCF server, however there is only a LocalIdentifier set and it is a different Guid from the client side (which makes sense, but I would have expected the DistributedIdentifier to go across).
    So I changed the wait the code above works and instead, on the WCF side, I call a method that calls Transaction.Current.EnlistDurable() with the DummyEnlistmentNotification class from the link above (though with a unique Guid for each transaction instead of the hardcoded guid in the link). I now havea  DistributedIdentifier on the server-side, but it still doesn't fix the problem.
    It appears that when I'm in the midst of transactions failing, even after I shut down IIS, I'm unable to get the DTC service to shutdown and restart. If I go into Component Services and change the security settings, for example, and hit Apply or OK, after a bit of a wait I get a dialgo that says, "Failed ot restart the MS DTC serivce. Please examine the eventlog for further details."
    In the eventlog I get a series of events:
    1 (from MSDTC): "The MS DTC service is stopping"
    2 (From MSSQL$SQLEXPRESS): "The connection has been lost with Microsoft Distributed Transaction Coordinator (MS DTC). Recovery of any in-doubt distributed transactions
    involving Microsoft Distributed Transaction Coordinator (MS DTC) will begin once the connection is re-established. This is an informational
    message only. No user action is required."
    -- Folowed by these 3 identical messages
    3 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
    4 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
    5 (from MSDTC Client 2): 'MSDTC encountered an error (HR=0x80000171) while attempting to establish a secure connection with system GCOVA38.'
    6 (From MSDTC 2): MSDTC started with the following settings: Security Configuration (OFF = 0 and ON = 1):
    Allow Remote Administrator = 0,
    Network Clients = 1,
    Trasaction Manager Communication:
    Allow Inbound Transactions = 1,
    Allow Outbound Transactions = 1,
    Transaction Internet Protocol (TIP) = 0,
    Enable XA Transactions = 1,
    Enable SNA LU 6.2 Transactions = 1,
    MSDTC Communications Security = Mutual Authentication Required, Account = NT AUTHORITY\NetworkService,
    Firewall Exclusion Detected = 0
    Transaction Bridge Installed = 0
    Filtering Duplicate Events = 1
    This makes me wonder if there's something maybe holding a transaction open somewhere?

    The statement executed from the sql server. (Installed version sql server 2008 64 bit standard edition SP1 and oracle 11g 64 bit client), DTS enabled
    Below is the actual sql statement issued
    SET XACT_ABORT ON
    BEGIN TRAN
    insert into XXX..EUINTGR.UPLOAD_LWP ([ALTID]
              ,[GRANT_FROM],[GRANT_TO],[NO_OF_DAYS],[LEAVENAME],[LEAVEREASON],[FROMHALFTAG]
              ,[TOHALFTAG] ,[UNIT_USER],[UPLOAD_REF_NO],[STATUS],[LOGINID],[AVAILTYPE],[LV_REV_ENTRY])
              values('IS2755','2010-06-01',
    '2010-06-01','.5',     'LWOP'     ,'PERSONAL'     ,'F',     'F',     'EUINTGR',
    '20101',1,1,0,'ENTRY')
    rollback TRAN
    OLE DB provider "ORAOLEDB.ORACLE" for linked server "XXX" returned message "New transaction cannot enlist in the specified transaction coordinator. ".
    Msg 7391, Level 16, State 2, Line 3
    The operation could not be performed because OLE DB provider "ORAOLEDB.ORACLE" for linked server "XXX" was unable to begin a distributed transaction.
    Able to execute the above statement successfully without using transaction.We need to run the statement with transaction.

  • Best practice for linking fields from multiple entity objects

    I am currently transitioning from PHP to ADF. I'm looking for the best practice for linking data from multiple entity objects.
    Example:
    EO 'REQUESTS' has fields: req_id, name, dt, his_stat_id, her_stat_id
    EO 'STATUSES' has fields: stat_id, short_txt_descr
    'REQUESTS' is linked to EO 'STATUSES' on: STATUSES.stat_id = REQUESTS.his_status_id
    'REQUESTS' is also linked to EO 'STATUSES' on: STATUSES.stat_id = REQUESTS.her_status_id
    REQUESTS.his_status_id is independent of REQUESTS.her_status_id
    When I create a VO for REQUESTS, I want to display: REQUESTS.name, REQUESTS.dt, STATUSES.short_txt_descr (for his_stat_id), STATUS.short_txt_descr (for her_stat_id)
    What is the best practice for accomplishing this? It appears I could do it a few different ways:
    1. Create the REQUESTS VO with a LOV for his_stat_id and her_stat_id
    2. Create the REQUESTS VO with the join to STATUSES performed within the query for the VO. This would require joining on the STATUSES EO twice (his_stat_id, her_stat_id)
    3. I just started reading about View Links - would that somehow do what I'm looking for?
    I also need to be able to update his_status_id and her_status_id through the by selecting a STATUSES.short_txt_descr from a dropdown.
    Any suggestions on how to approach such a stupidly simple task?
    Using jDeveloper 11.1.2.2.0 if that makes a difference in the solution.
    Thanks ahead of time,
    CJ

    CJ,
    I vote for solution 1 as it's just your use case. As you said you what to update the his_status_id and her_status_id through the by selecting a STATUSES.short_txt_descr by a drop down. This is exactly the LOV solution.
    ViewLinks are used fro master detail navigation (which you don't do here) and Joining the data make it difficult to update (and you still need a LOV for the drop down box.
    Timo

  • The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.

    I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
    The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
    Here is code that illustrates what I am doing:
    DECLARE @MDX varchar(max);
    SET @MDX='
    SELECT
    [Measures].[Extended Service Count]
    } ON COLUMNS,
    NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
    ON ROWS
    FROM (
    SELECT
    {[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
    FROM [MyCube]
    /* Test 1 */
    EXECUTE(@MDX) at SSASLinkedServer;
    /* Test 2 */
    DECLARE @ResultsB TABLE (
    Manufacturer varchar(255)
    , ExtendedServiceCount float
    INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
    Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
    Other articles I've found so far don't seem to apply to my case.  I am not creating any explicit transactions in my code.   When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
    Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
    Any ideas?
    -Tab Alleman

    Hi Tab,
    In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
    http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
    One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
    If you have any feedback on our support, please click
    here.
    Regards,
    Elvis Long
    TechNet Community Support

  • OLEDB provider VFPOLEDB for linked server returned message "Invalid path or file name"

    Hello,
    I'm hoping someone can shed some light on this.  I'd researched this error for days, reading all the post in this forum, however none of them address my issue.
    We use VFP 9 .dbf tables (free tables).  I setup a linked server to query the tables.  As first we were not able to view the tables in SQL Server Mgmt Studio (MSMS) until I sorted out the permissions.  I can query the tables if I copy over
    to the server so they are local tables.  However, across the network I am continually getting the error above and the following error:
    "Cannot initialize the data source object of OLE DB provider VFPOLEDB for linked server XXX."
    Here are the steps I've performed...
    Installed a 32 bit instance of SQL Server Express 2008 R2 using Windows Authentication on server 2 (the 64 bit instance could not see the VFP OLE DB provider, as we all know, because the provider is only 32 bit)
    Installed the latest VFP OLE DB from http://www.microsoft.com/en-us/download/details.aspx?id=14839.
    In the VFPOLEDB provider, I enabled Nested queries, Level zero only, Allow inprocess, and Supports 'Like' operator.
    Setup a linked server using the following query:
    EXEC master.dbo.sp_addlinkedserver
    @server = N'LinkedAC',
    @srvproduct = N'Visual FoxPro 9',
    @provider = N'VFPOLEDB',
    @datasrc = N'"\\server1\share\TIW\KOKAC"',
    @provstr = N'VFPOLEDB.1'
    At first I could not view the tables when expanding default>Tables, it failed due to a "catastrophic failure".  That can't be good ;-).  After digging around, I surmised it was because I'd set the SQL Instance to run as NT Authority\NetworkService.
    I created a new user, LinkedVFP, and added to the SQL Instance (using Windows Authentication), mapped the user to the master database with the db_datareader role.  I also added the LinkedVFP user to the network share.  I was then able to browse
    the tables in MSMS and query the data when local, but still not across the network.
    I'm using Crystal Reports to try and query the data from my local workstation using SELECT * FROM OPENQUERY(mylinkedserver, 'select * from table1').  This produces the two errors I mentioned above.
    To clarify, the VFP tables are on server 1 and the linked server is on server 2.  I've read about service account delegation, but unclear if this is the issue.  I went into our domain controller (neither server 1 or 2), AD User and Computers, and
    for server 2 I enabled 'Trust this computer for delegation to any service (Kerberos only)'. 
    Can anyone shed some light on this for me?
    Thanks!
    Aaron McVanner

    Hi Aaron,
    Thank you for your question. I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated. 
    If you have any feedback on our support, please click
    here.
    Regards,
    Elvis Long
    TechNet Community Support

Maybe you are looking for