Message Analyzer and RDMA NIC

Hi,
Is Message Analyzer compatible with RDMA cards, such as the Mellanox ConnectX-3 ?
In other words, can I capture with Message Analyzer the network traffic of this kind of NIC ?
thanks
Eric

Thanks Paul,
Using the scenario 'SMB Client with full payload' (I run Message Analyzer on my client), I can see the SMB2 traffic that is sent and received by both the Ethernet NIC and the RDMA NIC.
That's great!
A quick question:
In the trace, I have sometimes this message : "Microsoft_Windows_SMBClient, Transitioned to State: 180 Context: 0" or "Transitioned to State: 181 Context: 0".
Sometimes, I have "Session Setup Error: 0 Location: 537920470 Context: 13"
What does it mean? it is not a packet sent or received by the wire, right?

Similar Messages

  • Message Analyzer classes or videos?

    hi - I'm curious if you offer classes on using Message Analyzer and if not, have you considered offering one. I watched the 2 videos on the main page, and those helped getting starting, but it would be nice to get up and running
    more quickly, e.g., using powerShell scripts, etc.. More videos would be great. Just a thought.
    thx

    Yes, we are definitely considering this.  Thanks for the feedback.
    Paul

  • Looking at protocols on non default ports in Microsoft Message Analyzer

    I have previously been using Microsoft Network Monitor. I'd like to migrate to Microsoft Message Analyzer but I cannot find out how to view network traffic as a certain protocol (in my case TDS, the protocol SQL Server uses) unless it has the default port.
    For TDS the default TCP port is 1433 however I need to be able to look at TDS traffic coming on different TCP ports.
    It was possible to do this in Network Monitor by editing the switch statement in the TCP parser to add the ports I required along with 1433 and then rebuilding the parsers. In wireshark it's even simpler as you just select the traffic you want and say "View
    as TDS" however wireshark's TDS parsing is not as good as Microsoft's and we need the parsing to be as accurate as possible.
    Does anyone know how to parse traffic as particular protocols if they are not on the default port in Message Analyzer?
    Many thanks
    Rob

    With Message Analyzer and alternate Ports, you have to do much the same workaround we did with Network Monitor. We do plan to make it easier in the future, especially given the increased use of alternate ports, but for now changing the OPN (which is NPL
    for Message Analyzer), you can make it parse.
    You can make the change to TDS.OPN in C:\Users\YOURLOGINNAME\AppData\Local\Microsoft\MessageAnalyzer\OPNAndConfiguration\OPNs\Microsoft\MicrosoftCommon\TDS.OPN.  You can find the actor that is defined like this:
    autostart actor TDSOverTCP(ReassembledTCP.Server server)
    These "act" as a the endpoint looking to match messages from TCP.  You'll need to find each location where TDS.Port is defined and add your port.  So for instance in the first process rule, you'd changed:
        process server accepts s:ReassembledTCP.VirtualDataSegment
            where s.DestinationPort == Port.TDS && ((inboundCache != null && inboundCache.Buffer != null && inboundCache.Buffer.Count > 0) || IsTDSHeader(s.Payload))
    to
        process server accepts s:ReassembledTCP.VirtualDataSegment
            where (s.DestinationPort == Port.TDS || s.DestinationPort == 5555) && ((inboundCache != null && inboundCache.Buffer != null && inboundCache.Buffer.Count > 0) || IsTDSHeader(s.Payload))
    If you need more help, please let me know.  Keep in mind when you make an OPN change, we have to rebuild and cache things.  This might slow down the UI at first, but after everything you normally touch as been re-cached, it will be fast again.
    Paul

  • Message Analyzer

    Check out the Message Analyzer Wiki. . Post/comment Message Analyzer Operating Guide topics as articles; get feedback from Microsoft: 
    http://social.technet.microsoft.com/wiki/contents/articles/24023.microsoft-message-analyzer.aspx

    Thanks Paul,
    Using the scenario 'SMB Client with full payload' (I run Message Analyzer on my client), I can see the SMB2 traffic that is sent and received by both the Ethernet NIC and the RDMA NIC.
    That's great!
    A quick question:
    In the trace, I have sometimes this message : "Microsoft_Windows_SMBClient, Transitioned to State: 180 Context: 0" or "Transitioned to State: 181 Context: 0".
    Sometimes, I have "Session Setup Error: 0 Location: 537920470 Context: 13"
    What does it mean? it is not a packet sent or received by the wire, right?

  • Can I message back and forth from ipad2 to Macbook air?

    Can I message back and forth from ipad2 to mabook air?

    I think that the number of clicks to open a file is a rather shortsighted way to compare two operating systems.<<</div>
    Well excuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuse ME!
    I happen to think it's a pain to click twice on files when I'm used to clicking just once.
    But Tiger is a nice operating system. I enjoy that it has much more capabilities than the OS9. I mean, Tiger keeps up with the advancing internet. My beef is really against OS9. I can open OS9 in Tiger but not Tiger in OS9.

  • Gwcheck analyze and fix library

    my gwcheck log has this entry -
    *** Failure 'writing' GWCheck database (WpckCreateTaskRecord) ***
    GWCheck database pathname: [H:\Grpwise\po\ngwcheck.db]
    Date and time: 01/23/11 09:19
    Return code (hex): C037
    We have 4 post offices. I was in the middle of running analyze and fix on all the post offices when my server that hosts the gwia, webaccess, mta and the original post office abended. I successfully finished running analyze and fix on all my post offices. Went back to run analyze and fix on the library,the original post office is the only one attached to it and I get the above message. The stand alone gwcheck application never executes and I get one of those aggravating Microsoft popups asking to send error info to their site.
    Has anyone seen this error before? I am currently running a structural rebuild on the original post office hoping this will resolve my issue.
    Thanks

    waketech,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Smpatch analyze and download picks up just some Veritas patches

    smpatch analyze and download are picking up Veritas patches but only some of them. I found this out the hard way yesterday when only some of the SFRAC packages were patched during OS patching.
    Veritas support is aware and said other customers had called in with similar outages caused by this.
    Is anyone at Sun aware this is happening?
    Personally I find is disturbing that Sun is including any Veritas patches in the output by default. The fact that they are partially patching the installed product in some cases is reason enough not to do this.

    We assure our detectors and current files are kept up to date daily. (we're not updateconnection newbies ;-))
    We are not in the practice of doing the leg work for Sun support (especially since we pay for support), please ask them to do their own analysis of the patches they are supplying and QA work.
    Veritas provides very nice packages for both the SF packages and their patches, Sun should be directing customers to use those rather than going off and doing their own thing when it comes to Veritas products. Our sysadmins (all 20 of them) agree we should not allow Sun to patch our Veritas products, especially considering the ongoing QA issues with Sun's patch products.
    Thanks for responding.

  • Messages Beta and iChat email/account

    Trying to install Messages Beta instead of using iChat.
    Now the iChat window is open as before but I need to log  into Messages. Trying to do so with the same email/password as iChat fails.
    Any ideas? Do I need to create once again another new email?

    Scott, the same is happening for me. After a lot of messing about I have got the OSX app to recieve messages sent to my Apple ID and 3 other email addresses. I have also set those email addresses in the iOS app and signed on with my Apple ID on that too. So messages sent to any of my mail addresses come to both devices.
    Messages sent to my mobile number only go to my phone even though it's the same Apple ID and my phone number is registered with that ID.
    If I send from OSx, because I have set the 'caller ID' to be an email address that both iOS and OSx can recieve, the reply goes to both. However, this was not the case for the first hour of use, so I'm wondering if there is some server problem at Apple as it started working properly after a while.
    To me there is one vital missing peice and 1 nice to have. Messages sent to your phone number should also go to your OSx app. The Apple ID ties them together so there is no reason why this shouldn't work. The nice to have is the ability to set your 'caller ID' to be your mobile number from the OSx app in case the recipient doesn't have your email address in their address book.

  • Run Message Analyzer From Batch File

    New to Message Analyzer trying to run it from a batch file but have not found any good examples. Can anyone please provide some help? Trying to use C:\Program Files\Microsoft Message Analyzer>messageanalyzer.exe /logmode  but it just opens the GUI
    I need it to run command line only and output to a file of my choice.
    Raymond McAuliffe

    PowerShell is the way we support automation with Message Analyzer. Check out this blog:
    http://blogs.technet.com/b/messageanalyzer/archive/2013/10/29/using-powershell-to-automate-tracing.aspx

  • Difference between Bex Analyzer and Bex WAD

    Hi Every one,
    I am pretty new to SAP, and working on SAP BW Front end.
    I am pretty aware of Bex Analyzer and also Browser, but i always have a doubt about Bex WAD.
    In my present job i talk to the users and take the requirments and create queries in the Bex analyzer which i am comfortable doing it.
    I also know all the features of Analyzer and created quries and also published it on web, and also created workbooks and inserting multiple quries in the workbook etc etc..
    However i have zero knowledge on WAD and how it is useful to me, and as if now i haven't got any requirment from the client for me to create any report in WAD or do some thing in WAD.
    I have gone through SAP SDN help etc but i am not understanding it at all.
    So can any one explain me in a laymans terms what WAD is and how it will be useful to me?
    and also if possible send me link which has got PDF screen shots of what WAD is?
    Points is for sure.
    Regards,
    Ram

    Raj,
    Thanks for the reply, but i still did not get the understanding about WAD. i have studied the link which you sent me.
    I am still not able to understand how it is helpful for people like me,
    See i create my report in Query designer, and i can execute the query in Analyser. and if i want i can execute it in the Web from my query designer, and also i can create chart on the web if i want.And i can Broadcaste it in the Web.
    and also if i want i can create it in the workbook and create chart in that work book.
    Then what is the point of Web Application Designer (WAD).
    See i have created the Query in Designer in Development say Sales report Query on the infoprovider for SD, now what should i do with it in WAD.
    How can i get it in WAD, i went to start> all Programs>Bex> WAD and i logged in to development and a sereen opend. And from here what i can do, i mean how can i open my created query in WAD?
    As you guys know i am new to SAP itself, but i dont see any advantage about WAD, i read all the articals and there i found that i can create Web Items, HTML etc etc, but i already have HTML, when i execute my query from the Designer i get it in Web Browser...
    See my question is simple, i have a query which i have created in the Query Designer, now how can i get it to WAD and after getting it what can i do with it??
    If any one has a screen shots of there pls send me.
    And Sanjeev has sent me a PDF which i saw earlear and i done the same in my WAD but i am not about to get it to work.
    I have given the points to every one but still what i need i did not get yet.
    Regards,
    Ram

  • Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it drops a message again and again, preventing me to do anything about the setting.

    Problem with internet. When i open System preferences, Network, message drops down: 'your network settings have been changed by another application'. I click OK, but it dropps the message again and again, preventing me to do anything about the setting.

    A Fix for "Your network preferences have been changed by another application" Error 
    In the Library/Preferences/SystemConfiguration/ folder delete the following:
    com.apple.airport.preferences.plist
    NetworkInterfaces.plist
    preferences.plist
    com.apple.nat.plist
    You will have to re-configure all your network settings since deleting.
    (10.4.10)
    Use Software Update to update your OS to last version of Tiger.  Install all the other updates that goes along w/it.

  • I am having trouble installing Itunes 11.1.1.  I get an error message 2502 and 2503.  Any help in this regard would be appreciated.

    I am having troble installing Itunes 11.1.1.  I get erro message 2502 and 2503.  Any help?

    Windows 7 32 bits
    I had the same issue which is now solved. For your information, the following procedure was successful:
    Check permissions within the Installer folder. To do this, follow these steps.
    1. Click on Start and in the Start Search bar > type in > c: /windows/installer.
    2. Right click on c: /windows/installer at the top under programs and click properties.
    3. Click on the security tab > Verify if System and Administrator account has Full access permissions.
    Note : I ran into problem with locating the C:\windows\installer directory. For some reason Windows Explorer wouldn't show it even though I don't have it hidden. I ended up using the ExplorerXP application to locate the directory. ExplorerXP is available at http://www.explorerxp.com/

  • Iphone 5 - I am trying to delete message threads and once I do, I go to text someone else and it won't send. HELP? I just don't want those messages on my phone anymore.

    Iphone 5 - I am trying to delete message threads and once I do, I go to text someone else and it won't send. HELP? I just don't want those messages on my phone anymore. I have tried to restart my phone but when I do, the "deleted" threads show back up on my phone. I use iOS 7.1.

    Hello Makayla,
    It sounds like you're deleted message threads keep coming back after you restart the devie. I recommend starting by quitting all the running apps on your phone:
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it. 
    When you have done that restart the device and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    If the issue persists, backup your device to iTunes and then restore it as a new device and verify that it works. 
    How to erase your iOS device and then set it up as a new device or restore it from backups
    If it does, then restore your backup to either verify it still works and the software just needed reinstalled, or isolate the issue to the backup file itself. 
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • HT201413 I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the sign that says this application has failed because MSVCR80.dll was not found.

    I am having a problem updating itunes to the latest version on my windows xp i get the error message 126 and the banner that says this application has failed because MSVCR80.dll was not found. anyone have a fix suggestion? thanks

    Click here and follow the instructions.
    (98724)

  • Write message to Job log with message class and message number

    hi folk,
    When running a background job I'm able to write a message to the job log using the statement - Message "some text..." type 'I'.
    In the Job log I can see the message "some text.." with a "default" message class and message number (but in my report i don't specify any message ID) so I have no idea it comes from.
    Then I try to send a message where I specify the message class/number etc...using message id 'Z1' number 000 with "some text..." In the job log I now can see the "right" message class "Z1" and the number 000, but the message is empty?
    Please advice how to write a message with the message class and message number.
    Best regards
    LinhNg

    Hi Linh,
    How did you provide the text "Some message"? Did you hard code it or used a text element?
    Regards,
    Immanuel.

Maybe you are looking for