Message:" At least system 10.3 required" But already running OSX 5.5!

Im trying to install the Syncrosoft Licence Control to get a serial number so I can activate my Cubase AI 4 software from the internet but keep getting the following message:
"ATTENTION!
The Syncrosoft License Control cannot be installed on this computer, because the installed operating system version is too old. At least system version Mac OS X 10.3 ('Panther') is required!"
I already have Mac OS X 10.5.5 installed and running on my G5 ! Please someone help !

This has absolutely nothing to do with iSync - which is for syncing Contacts and Calendars to mobile phones and PDAs.
Clearly there is an error in the installer, so you would need to go to the developer of the software for help.

Similar Messages

I get the following message when trying to open Firefox: "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."

I have tried rebooting the PC and can open Firefox once but if a close and try to reopen, same message pops up. Have also unistalled and reinstalled, to no avail.

For possible causes see [[Firefox is already running but is not responding]].

I keep getting this message, what do I do? "Firefox is already running. To open to a new window, you must first close the Firefox process or restart your system. I have done this at least 10x times.plus reinstall and reboot the system.

I was having a compatability issue with another entities website and platform. I was asked to upload my informaiton with Mozilla Firefox. I used this digital platform before employing Internet Explorer to complete my master's program. I am able to install the program, the link picture is on my mainpage, but I am not able to launch it.

Firefox is already running but is not responding
https://support.mozilla.com/en-US/kb/Firefox%20is%20already%20running%20but%20is%20not%20responding?s=firefox+is+already+running&as=s
Check and tell if its working.

After updating Firefox, cannot open at all, system tells me Firefox is already running, but it isn't. I can't even remove it from system???

After updating to Firefox 6, I cannot open Firefox at all. Nothing happens when I try. I went to Control Panel and tried to remove Firefox, but my system tells me that Firefox is already running, please close to continue. I do not have another copy running. Everything was working great until this last update.
I have tried all the recommendations on your site but nothing is helping - very frustrating!!!!!

After updating to Firefox 6, I cannot open Firefox at all. Nothing happens when I try. I went to Control Panel and tried to remove Firefox, but my system tells me that Firefox is already running, please close to continue. I do not have another copy running. Everything was working great until this last update.
I have tried all the recommendations on your site but nothing is helping - very frustrating!!!!!

I cannot access safari. Get error message: deals with system configuration. Tried basic reinstalling of OSx

Suddenly I am unable to access Safari when I click the icon. Read book and followed basic troubleshooting: reinstall Mac OS X & applications. Icon there but still cannot access. Error code reads: cannot be openned b/c problem; deals w/system config. System still under warranty. What am I doing wrong? Any thoughts out there?
angelia m

Suddenly I am unable to access Safari when I click the icon. Read book and followed basic troubleshooting: reinstall Mac OS X & applications. Icon there but still cannot access. Error code reads: cannot be openned b/c problem; deals w/system config. System still under warranty. What am I doing wrong? Any thoughts out there?
angelia m

When I click on Firefox.exe I get error message Can't start Firefox.exe as js3250.dll missing. When I try to re-download Firefox I get message saying can't download because Firefox is already running, but it isn't. How and where can I get js3250.dll?

Why punish me for a few too many keystrokes by deleting what I have already entered below my question. You're becoming MS.

See these posts about the same problem:
*[/questions/798251]
*[/questions/823473]

"uses a file type that is blocked from opening in this version" error message when opening a *.doc file with Word already running

Several customers running different versions of Office 2011 (14.4.1-14.4.5) on OSX varying from 10.7.5 to 10.9.5, running on various kinds of hardware (iMac/MacBook Pro/MacBook Air) of various ages are having issues opening *.doc files if the Word is already open. The error message that gets displayed is, "XXXX.doc uses a file type that is blocked from opening in this version"
When the customer tries to open the same file via File-Open, she gets "The file is locked for editing. you can open the file as read-only".
When trying to do so, she gets "Word cannot open this document. The document might be in use, the document might not be a valid Word document, or the file name might contain invalid characters".
If Word gets Force-quit, the same document opens without any problems.
1. Repairing Disk permissions was ran several times. and the volume was found to be OK.
2. I have noticed that in this scenario either deleting the normal.dotm or com.microsoft.word.plist (~/Library/Preferences) sometimes resolves the issue, sometimes it doesn’t. There is no pattern to follow. All versions of Office are affected, the fully updated and the non-updated ones.
3. I have tried completely removing the suite using Office 2011 Uninstall.app and/or Remove Office 2011 Uninstaller.pkg, then going through customer's library and manually removing all the Office references.
4. None of these systems had Office 2008 in the past.
Any help will be greatly appreciated.

Reboot both the Mac and the server. Word opens .DOC files and Excel opens .XLS files. As you have found out by copying the files to the computer. It is the connection between the 2 computer that is causing the error.

Have purchased PE12, but says incompatible with OSX, but am running OSX 10.9.4 on macbook Intel Core Duo

Downloaded and purchased from the macstore. Not an activation issue. That is all ok. Recently upgraded system to OSX Mavericks. Completely up to date.
Spec of hardware is:
Model Name: MacBook
Model Identifier: MacBook5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MB52.0088.B05
Plenty of disk space.
Error message:
Check with the developer to make sure Adobe Photoshop Elements 12 Editor works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X.
Apple error report:
Process:         Adobe Photoshop Elements 12 Editor [1752]
Path:            /Applications/Adobe Photoshop Elements 12 Editor.app/Contents/MacOS/Adobe Photoshop Elements 12 Editor
Identifier:      com.adobe.pse12editor
Version:         ???
App Item ID:     768610744
App External ID: 192852631
Code Type:       X86-64 (Native)
Parent Process: launchd [159]
Responsible:     Adobe Photoshop Elements 12 Editor [1752]
User ID:         504
Date/Time:       2014-08-26 08:29:47.409 +0100
OS Version:      Mac OS X 10.9.4 (13E28)
Report Version: 11
Anonymous UUID: 4D1C6962-CF53-A0FB-7823-7FB238756D85
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: @executable_path/../Frameworks/AdobeLinguistic.framework/Versions/3/AdobeLinguistic
Referenced from: /Applications/Adobe Photoshop Elements 12 Editor.app/Contents/MacOS/Adobe Photoshop Elements 12 Editor
Reason: image not found
Binary Images:
    0x7fff6112a000 -     0x7fff6115d817 dyld (239.4) <042C4CED-6FB2-3B1C-948B-CAF2EE3B9F7A> /usr/lib/dyld
    0x7fff8637f000 -     0x7fff86564fff com.apple.CoreFoundation (6.9 - 855.17) <729BD6DA-1F63-3E72-A148-26F21EBF52BB> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x7fff87b96000 -     0x7fff87e94fff com.apple.Foundation (6.9 - 1056.13) <2EE9AB07-3EA0-37D3-B407-4A520F2CB497> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x7fff8c56f000 -     0x7fff8c5dbfff com.apple.framework.IOKit (2.0.1 - 907.100.13) <057FDBA3-56D6-3903-8C0B-849214BF1985> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x7fff8d0c6000 -     0x7fff8d0d4fff com.apple.opengl (9.6.1 - 9.6.1) <B22FA400-5824-36AF-9945-5FEC31995A0E> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
    0x7fff8f69b000 -     0x7fff8f69bfff com.apple.Carbon (154 - 157) <EFC1A1C0-CB07-395A-B038-CFA2E71D3E69> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x7fff90e86000 -     0x7fff910e0ff9 com.apple.security (7.0 - 55471.14.8) <EA03E140-2509-3A07-8440-2DC97C0D478B> /System/Library/Frameworks/Security.framework/Versions/A/Security
Model: MacBook5,2, BootROM MB52.0088.B05, 2 processors, Intel Core 2 Duo, 2 GHz, 2 GB, SMC 1.38f5
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
Memory Module: BANK 1/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.6f1 14216, 3 services, 15 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS543212L9SA02, 120.03 GB
Serial ATA Device: HL-DT-ST DVDRW GS22N
USB Device: Built-in iSight
USB Device: Seagate External Drive
USB Device: USB2.0 Hub
USB Device: RF Receiver
USB Device: DYMO LabelWriter 400
USB Device: Microsoft Wireless Optical Mouse® 1.00
USB Device: Apple Internal Keyboard / Trackpad
USB Device: IR Receiver
USB Device: BRCM2046 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus:

It is desperately important to delete all existing prefs on upgrading to mavericks:
Photoshop Elements and OS X Mavericks | Barbara's Sort-of-Tech Blog
At this point you would also need to delete all saved application states, too.

How do I change the "new messages" sound? (Thunderbird 31.3.0 on MacBookPro running OSX 10.9.5)

I followed the instructions at
https://support.mozilla.org/en-US/kb/how-customize-new-mail-sound
to change the "new messages" sound. It does play when I click on "Play" in the Preferences pane.
However, when new mail comes in, it plays the default sound. So why is it ignoring the Preference?

I was wrong. It's playing both the default sound AND the sound I selected. How do I get the default sound to stop?

I uninstalled Thunderbird but when i try to reinstall it I keep getting a message that the system must be rebooted to finalize the uninstall, over & over again.

I am using a laptop with Windows 7. For several weeks Thunderbird has been running very slowly & there are messages saying a script is running too long. So I decided to try to clean up all the mail boxes, but still get the messages...so then I decided to uninstall Thunderbird and this worked correctly & I rebooted the system (as it asked me to). But when I try to re- install Thunderbird I keep getting a message that the system must be rebooted to finalize the uninstall. I did this but the same thing happens each time I try to install...so now I have no mail application on my laptop. Most frustrating but fortunately I have an iPad...
Can someone please advise? Thanks in advance

you original problem is almost certainly your anti virus, I would also hazard a guess your new one is as well.
Thunderbird does not require a reboot on install, or uninstall.
try restarting the operating system in '''[http://en.wikipedia.org/wiki/Safe_mode safe mode with Networking]'''. This loads only the very basics needed to start your computer while enabling an Internet connection. Click on your operating system for instructions on how to start in safe mode: [http://windows.microsoft.com/en-us/windows-8/windows-startup-settings-including-safe-mode Windows 8], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows 7], [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-vista Windows Vista], [http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true" Windows XP], [http://support.apple.com/kb/ht1564 OSX]
; If safe mode for the operating system fixes the issue, there's other software in your computer that's causing problems. Possibilities include but not limited to: AV scanning, virus/malware, background downloads such as program updates.

I've recently upgraded my system to Mountain Lion, trying to run XCode. I am having the following message: This installation of Xcode 4.2.1 requires Mac OS X 10.7 Lion.

I've recently upgraded my system to Mountain Lion, trying to run XCode. I am having the following message: This installation of Xcode 4.2.1 requires Mac OS X 10.7 Lion.I've recently upgraded my system to Mountain Lion, trying to run XCode. I am having the following message: This installation of Xcode 4.2.1 requires Mac OS X 10.7 Lion. Please advise. Thanks

I've come across the same thing, and went to the Mac App Store and downloaded and installed Xcode through that.
However, it seems to have put the new Xcode.app straight into the Applications folder, whereas before (v 4.2.1) was installed in Developer\Applications\Xcode.app. In fact, it still is!
How do I uninstall everything that belongs to Xcode 4.2.1 from my system, but leaving Xcode 4.4. It seems parts of the new Xcode (4.4) have been put into the \Developer\ folder as well, so it's not obvious what I would need to delete... Can anyone shed some light on this?

I try to launch firefox get the following message "firefox is already running, but is not resonding. to open a new window, you must first close the existing firefox process, or restart your system" firefox is not running and restart doesn't work

when I launch firefox get the following message "firefox is already running, but is not resonding. to open a new window, you must first close the existing firefox process, or restart your system" firefox not running and a restart doesn't solve the problem

Download a fresh Firefox copy and save the file to the desktop.
*Firefox 12.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
See also:
*https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
*http://kb.mozillazine.org/Profile_in_use
*http://kb.mozillazine.org/Recovering_a_missing_profile

If I'm in Lightroom 5, and try to Edit in Photoshop CS6, I always get the following message: "This version of Lightroom may require the Photoshop Camera Raw plug-in version 8.6 for full compatibility." But I have updated to 8.6 and have no remaining updat

If I'm in LIghtroom 5, and try to Edit in Photoshop CS6, I always get the following message: "This version of Lightroom may require the Photoshop Camera Raw plug-in version 8.6 for full compatibility." But I have updated to 8.6 and have no remaining updates. How can I fix this?
If I click "Open Anyway" or "Render using Lightroom", I get the following message:
"Adobe Photoshop CS6 cannot be opened because of a problem.
Check with the developer to make sure Adobe Photoshop CS6 works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X."
Please tell me what to do so I can edit from Lightroom to Photoshop.

In Photoshop, if you choose Help - About Plug-in... - Camera Raw, does it say 8.6?
Seems to me there was some hiccup they found in the update process, which prompted this:
Camera Raw updates cannot be applied
I honestly don't know if the problem could apply to 8.6 as well, which is why I asked you to check to make very sure you really got it.
-Noel

I keep getting this message after closing Firefox and attempt to reopen-Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

I keep getting this message after closing Firefox and attempt to reopen-Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

See:
* http://kb.mozillazine.org/Recovering_a_missing_profile
* http://kb.mozillazine.org/Profile_in_use

I getthe message Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. It is NOT open I onlly have one computer

I installed FF on my new computer, Windows 7 Toshiba, I get the message''' Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system'''. It is NOT open I only have one computer.
I had a computer expert try everything and we cannot get it to open.

Look for the firefox process firefox.exe and kill it with for instance task manager. it is also worth watching for plugincontainer.exe.
The problem and solutions are explained in the articles:
* [[firefox is already running but is not responding]]
*[[firefox hangs]]

Message:" At least system 10.3 required" But already running OSX 5.5!

Similar Messages

Maybe you are looking for