Message class defined as part of report/program statement

Hi,
This is a very general question but I am not sure to what this refers to.
"Message class defined as part of report/program statement"
What does this mean or what is this referenced to?
Thanks
Edited by: David Rivera on Feb 3, 2010 10:36 PM

Hello,
it means when you are creating a report / program you can assign one message class to that...
like:
report Ztest message-id <message class>
then you can access all the messages defined in that message class...
Thanks
K.

Similar Messages

  • REPORT/PROGRAM statement missing.

    Hi,
    I have a report with two includes. In both the Include Programs,i am getting a error message 'REPORT/PROGRAM statement missing, or program type is I (INCLUDE).'
    Eg.
    Report reportname.  " program type Report
    include program1.    " program type Inlude
    include program2.    " program type Inlude
    start-of-selection.
    Please Help.
    Thanks & Regards,
    Jayapal.

    Hi ,
    This will not be any problem Jay. Since it is a Non executable program it will always show that error. You can activate the program.
    Do one thing create a test report program and call this include program in that report and execute. It will show you the result.
    I've created an example program for this, please have a look
      My Report Program :
    REPORT ZTEST.
    INCLUDE ZTESTINCLUDE.
    My Include Program :
    *&  Include           ZTESTINCLUDE
    data : a type i,
           b type i,
           c type i.
    a = 3.
    b = 2.
    c = a + b.
    write : / 'Result is :' , c.
    Try executing the Report it will show you the result 5. Tell the client this is not a problem. Check in the attributes of your Include program ( program1 ) if it is of type Include.
    Regards,
    Sai

  • REPORT/PROGRAM statement missing, or program type is INCLUDE error upgrade.

    Hi Experts,
    I have done the recording for FK05 and created functionmodule for the same. But when I use that function module in my custom program or if I try directly execute the FM, I am getting dump like syntax error. So I did syntax check and tried to activate, I am getting "REPORT/PROGRAM statement missing, or program type is INCLUDE error upgrade" error.
    Please help me soon to resolve this issue.
    Thanks in advance.
    Shreyansh

    Hi
    Goto main function group include name attributes tab and double click.
    once the include is opened, try to activate it. if shows errors then fix.
    regards
    Shiva

  • Error: REPORT/PROGRAM statement missing , program type is I (include).

    Hi,
    I have created a REPORT Program (Z Program) and also created a TOP INCLUDE. I am NOT using Function module. When I tried to syntex check the INCLUDE, system is giving
    following error:
    REPORT/PROGRAM statement missing, program type I (Include).
    Can you help me in resolving this error.
    Currently TOP include has only one statement to declare a Constant.
    Thanks,

    hi,
    take your program in se80.
    double click on the program name. Right click on it and press Activate. All the include will get activated and the problem will get solved.
    Regards,
    Renjith Michael.
    http://www.sourceveda.com/

  • Photoshop Elements 11 will not open. It gives an error message about a missing part of the program.

    I purchased a new HP Envy running Windows 8, with Photoshop Elements 11 preinstalled.  When I clicked on the icon the program would not open. It gave an error message stating part of the program was missing. The error message was in code and stated some parts of the program needed to run togeth, or side by side. Am I able to download a repair patch from Adobe customer support?

    Could you please attach a snapshot showing the error dialog?
    ~Andromeda

  • Is there a tool that could export objects used in a report program?

    Hello Experts,
    I'm new in ABAP programming, recently my team members wanted to find a tool in the SAP system, which could export a list of objects that used in a report program. For example, I want to figure out what function modules and classes are used in a report program, using the tool, I could get a list that have the name of the modules and classed used and even source code of them.
    The function of the tool acts like 'where-used list' showed in the SAP system, but the differences is I do not have to type the name of the objects. The tool is just focus on the specific report program and list the name and source code of the objects used in that report program.
    Hope I explain this clearly.
    Is SAP system has such tools? Please give me some hints on this.
    Thanks you all for the time and help in advance.

    Hi Anna,
    Welcome to ABAP world,
    Check this link
    How to identify various objects used in code
    hope this is useful to you.
    and also seach in the SCN you will find more.
    Regards!

  • Message class for a given transaction

    Hi Experts,
        How to find the message class and number for a given program, t-code or package?
    Thanks in advance!!!
    Moderator message: please do more research before asking, show what you have done when posting.
    Edited by: Thomas Zloch on Feb 24, 2012

    Go SWo1,  do F4 help on the Object type field.  Click "Infomation System".  In the "Short Description" field, enter Sales and clic green check.  Of course you will see the buiness object for Sales Order in the list.  This is just one way of trying to find business objects.
    Regards,
    Rich Heilman

  • Debug ME22N transaction to find out the message class

    Hi All,
    I want to know the best way of debugging for the following process:
    Create ME22N
    went to item level account assignment and selected the cost center.
    Got an error message in the status bar
    I wanted to find out where the message class is used in the background program
    Any help is appreciated.
    Thanks

    Hi,
    Take the message id and message number from the error message..
    Go to SE91..
    Give ID and display..
    Choose the message number..
    Press the where used list button..It will show all the programs that is using this message number..
    Thanks,
    Naren

  • I downloader all the Adobe Presenter, looks like everything downloaded but when I open the program I get the following message: The file archive part of Presenter is missing. You need all parts in the same folder

    I downloadedall the Adobe Presenter, looks like everything downloaded but when I open the program I get the following message: The file archive part of Presenter is missing. You need all parts in the same folder

    HI There,
    It seems that Presenter is not fully downloaded. Please check you have downloaded .exe and .7z files successfully. In case you are still facing the issue then please click on the following link to chat with the support :  Chat
    with an Expert
    Regards,
    Mayank

  • How to keep the field open for input with error message in report program

    Hi,
      Need a help in solving the below issue.
    "How to keep the field open for input with error message in report program"
    Regards,
    C.Shasiraj.

    Hi...
    you have to use the event:
    <b>AT SELECTION-SCREEN ON <FIELD> EVENT.</b>
    u have to give an error message in this event.
    Consider the following <b>Example:</b>
    <b>PARAMETERS : NUMBER TYPE I.
    AT SELECTION-SCREEN ON NUMBER.
      IF NUMBER = 10.
        MESSAGE 'Number vakue is 10' TYPE 'E'.
      ENDIF.
    START-OF-SELECTION.
      WRITE NUMBER.
    </b>
    in this if u give the value of number = 10, it will not proceed further, if u give some other value other than 10 you will proceed further...
    Execute this program once u will understand....
    also Consider the following links :
    <b>Regarding events:</b>
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a237d9b511d1950e0000e8353423/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/79/34a23ad9b511d1950e0000e8353423/frameset.htm
    <b>Regarding messages:</b>
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c5/aa575426ad11d2954d0000e8353423/frameset.htm
    This is very useful.......
    Reward points if useful....
    Suresh....

  • Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION in Report

    Hi All,
    This is the frequent problem we are facing in BW production.
    While executing the BW reports
    We are getting the below error.
    No Space left in Shared memory.
    Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION in Report.
    An exception with the type CX_SY_EXPORT_NO_SHARED_MEMORY occurred, but was neither handled locally, nor declared in a RAISING
    Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    System error in program SAPLRRK0 and form INITIALIZE_DATA_ACCESS-01
    The problem solved when we restarted the server.
    but this is coming very frequent.
    Is there any permanent soln for this one.
    Pls advice.
    Thanks!
    Sanjay

    Hi,
    Check the below notes,
    Note 656060 - OLAP: Cache main memory displacement not functioning
    Note 1114164 - Termination in the cache due to insufficient shared memory
    Apply note 1114164  and check if issue resolves or not.
    Regards,
    Niraj

  • DOWNLOADING A REPORT PROGRAM CODE IN TO TEXT FILE

    I HAVE ONE SIMPLE REPORT PROGRAM SAY,
    *& Report  ZTEST25
    REPORT  ZTEST25.
    DATA : A(8) TYPE C.
    A = 'ANDHRA'.
    WRITE  A.
    THE ABOVE MENTIONED REPORT PROGRAM SHOULD BE DOWNLOADED TO A TEXT FILE USING ANOTHER REPORT PROGRAM BY USING PARAMETER.
    THE OUTPUT IN THE FLAT FILE SHOULD BE:
    REPORT  ZTEST25.
    DATA : A(8) TYPE C.
    A = 'ANDHRA'.
    WRITE  A.

    here is complete code for  that
    report  z11dpk_assign1
            no standard page heading
            message-id z11dpk
            line-size  200                 "page width
            line-count 65(0).              "page length.
    T  A  B  L  E S  D  E  C  L  A  R  A  T  I  O  N                  *
    tables:  trdir,     " System Table TRDIR
             trdirt.    " Title texts for programs in
    D  A  T  A  D  E  C  L  A  R  A  T  I  O  N                       *
    Types
    Structure declaration for system table
    types: begin of struct_sys,
           name(40) type c,       " ABAP program name
           clas(4)  type c,       " Program class
           subc(1)  type c,       " Program type
           cnam(12) type c,       " Author
           cdat     type dats,    " Created on
           rstat(1) type c,       " status
           text     type repti,   " Report title
           c_box(1) type c,       " for check box
           end of struct_sys.
    Structure for internal table for report data
    types: begin of struct_report,
           line(500),
           end of struct_report.
    C  O  N  S  T  A  N  T  S  D  E  C  L  A  R  A  T  I  O  N  S
    data     : c_name(50)        type c,               " Program Name
               c_filename        like ibipparms-path,  " File name
               c_filename1       type string,          " File name
               c_ext(5)          value '.TXT',         " File extension
               c_textline(150)   type c,               " downloading status
               c_count           type c,               " no of pgm downlded
               c_count_text(100) type c.               " Text pgm downlded
    The CONSTANTS statement defines global and local constants.
    By using constants, you can read statically declared data objects,
    constants: c_const(8)        value 'UNTITLED'.
    I  N  T  E  R  N  A  L  T  A  B  L  E  D  E  C  L  A  R  A  T  I  O N
    data: it_sys    type standard table of struct_sys, " Itab for sys data
          it_report type standard table of struct_report with
          non-unique default key initial size 1000.    " Itab for rep data
    W  O  R  K  A  R  E  D  E  C  L  A  R  A  T  I  O  N  S
    data: wa_sys    type struct_sys,          " Work area for sys data
          wa_report type struct_report.       " Work area for report data
    I  N  I  T  I  A  L  I  Z  T  I  O  N
    initialization.
      clear  : wa_sys.
      refresh: it_sys,
               it_report.
      c_count = 0.
    S  E  L  E  C  T  I  O  N  -  S  C  R  E  E  N
      selection-screen  : begin of block blk3 with frame title text-015.
      selection-screen  : begin of block blk1 with frame title text-001.
      select-options    : s_name for trdir-name.              " Program name
      selection-screen  : end of block blk1.
      selection-screen  : begin of block blk2 with frame title text-002.
      parameters        : p_file type rlgrap-filename. " Path for loc folder
      selection-screen  : end of block blk2.
      selection-screen  : end of block blk3.
    A  T  S  E  L  E  C  T  I  O  N  -  S  C  R  E  E  N
    *The possible entries pushbutton for F4 appears beside the appropriate
    *fld (p_file) When the user activates this pushbutton or presses F4 for
    *the fld, the event is executed You can thus implement a self-programmed
    *possible entries routine for the input/output fields of the selection
    *screen
    at selection-screen on value-request for p_file.
    Value of Local file for upload/download is obtained by using this FM
      call function 'F4_FILENAME'
        importing
          file_name = p_file.
    S  T  A  R  T  -  O  F  -  S  E  L  E  C  T  I  O  N
    start-of-selection.
    CONCATENATE p_name '%' INTO z_name.
      select name
             clas
             subc
             cnam
             cdat
             rstat into table it_sys
                   from trdir
    *Sorts the selected records in ascending order by the specified column
    *references f1 ... fn (name)
                  where name in s_name order by name.
                  WHERE name LIKE 'Z11%'.
      if sy-subrc = 0.
        sort it_sys by name.
        clear wa_sys.
        loop at it_sys into wa_sys.
          select single text
                 into wa_sys-text
                 from trdirt
                 where name  = wa_sys-name and
                       sprsl = sy-langu.
          modify it_sys from wa_sys index sy-tabix.
          clear wa_sys.
        endloop.
      endif.
      set pf-status 'MENU_ASSIGN1'.
      uline.
      write:/    sy-vline ,
             8   sy-vline,  text-009 color 4,         " Name of the Program
             55  sy-vline,  text-003 color 4,         " Class
             62  sy-vline,  text-004 color 4,         " Type
             68  sy-vline,  text-005 color 4,         " Created By
             80  sy-vline,  text-006 color 4,         " Created On
             92  sy-vline,  text-007 color 4,         " Status
             100 sy-vline,  text-008 color 4,         " Program text
             180 sy-vline.
      clear wa_sys.
      loop at it_sys into wa_sys.
        uline.
        write:/ sy-vline,
               5   wa_sys-c_box as checkbox,
               8   sy-vline,  wa_sys-name,
               55  sy-vline,  wa_sys-clas,
               62  sy-vline,  wa_sys-subc,
               68  sy-vline,  wa_sys-cnam,
               80  sy-vline,  wa_sys-cdat,
               92  sy-vline,  wa_sys-rstat,
               100 sy-vline,  wa_sys-text,
               180 sy-vline.
      endloop.
    at user-command.
      case sy-ucomm.
        when 'BACK'.
          leave screen.
        when 'EXIT'.
          leave program.
        when 'DOWN'.
          clear wa_sys.
          do.
            clear wa_sys.
            read line sy-index field value wa_sys-c_box wa_sys-name.
            if sy-subrc <> 0.
              exit.
            endif.
    *if check box is selected.....
            if wa_sys-c_box = 'X'.
              clear c_textline.
    *Assigns the contents of the source field to the target field as a new
    *value
              write text-010    to c_textline.         " Downloading
              write wa_sys-name to c_textline+12.
              write text-011    to c_textline+53.      "to
              write c_filename1 to c_textline+56.      " file name
    FM returns the Text to be displayed on screen
              call function 'SAPGUI_PROGRESS_INDICATOR'
                exporting
                  text = c_textline.
              c_count = c_count + 1.
    Reads the program prog from the database into the internal table itab.
    The line length of table itab should be at least 72 characters
              read report wa_sys-name into it_report.
              if sy-subrc <> 0.
                exit.
              endif.
    *p_file contains the character string untitiled
    This comparison is not case sensitive
              if p_file cs c_const.        " Untitled
    the string ''(space) replaces the untitled occurrence of the search
    ignore case is used as this search is case sensitive
                replace c_const in p_file with '' ignoring case.
              endif.
    Places the fields f1 to fn (n >= 2) after g (target field).
              concatenate p_file wa_sys-name  c_ext into c_filename1.
    *Data transmission of an internal table from the server to a file on the
    PC is done by this FM.
              call function 'GUI_DOWNLOAD'
                exporting
                  filename = c_filename1
                  filetype = 'ASC'
                tables
                  data_tab = it_report.
              if sy-subrc <> 0.
                message id sy-msgid type sy-msgty number sy-msgno
                        with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
              endif.
            endif.
          enddo.
          clear c_count_text.
          write c_count  to c_count_text+1.
          write text-030 to c_count_text+4.
    Nos Of Pgms downlded successfully
          message i205 with c_count_text.
      endcase.
    T  O  P -  O  F  -  P  A  G  E
    top-of-page.
      uline.
      write:/   sy-vline,
             10 text-020 color 2,  " Fujitsu India Limited
             70 text-021 color 2.  " List of ABAP Programs
      write:/   sy-vline,
             10 text-022 color 3, sy-datum color 3,    " Date
             70 text-023 color 3, sy-pagno color 3.    " Page No
    plz reward if helpful
    vivek

  • Message class RP

    we have an error message 'reserved for RP' when running a report . The message class is RP and number is 016. Can anyone tell what the message means .

    The message is defined as just & & & &, so the text is being generated in the program.  Run the transaction where you get the error in debug.  Put a watchpoint on sy-msgno = 16, and see what's causing the message to be generated.
    matt

  • Calling a Report Program In Web Dynpro Using Submit statment

    Hi all,
             Can any one suggest how can i call a report program form Web Dynpro using Submit statment. I tried to call it its showing Field symbols not defined error. Is their any other ways to call Report in a Web Dynpro?. I have posted the error message when i tried using SUBMIT ZRR AND RETURN CONTROL
    Field symbol has not yet been assigned.
    The error occurred on the application server mnghcmsap_HRS_00 and in the work process 1 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Form: CHECKBOX_OUT of program SAPLKKBL
    Form: GEN_LINE_OUT of program SAPLKKBL
    Form: DATA_OUT_SIMPLE of program SAPLKKBL
    Form: LIST_OUTPUT_NEW of program SAPLKKBL
    Form: FIRST_LIST_DISPLAY of program SAPLKKBL
    Module: LIST_DISPLAY of program SAPLKKBL
    Function: K_KKB_LIST_DISPLAY of program SAPLKKBL
    Method: PRINT_BACKEND of program CL_GUI_ALV_GRID===============CP
    Method: SET_TABLE_FOR_FIRST_DISPLAY of program CL_GUI_ALV_GRID===============CP
    Form: PBO of program SAPLSLVC_FULLSCREEN
    Edited by: VINMANO on Jul 22, 2009 2:54 PM

    HI,
    Its possible to call report program from Web dunpro...
    chk out dis link,
    calling report(se38) in webdynpro abap
    By the way are using field symbol anywhere and left it unassigned?
    Thanks,
    Divya.S

  • How to do the Validations in Report Programming?

    How to do the Validations in Report Programming?
    how to do screen Validations and Field Validations if posssible can any one send the code regarding the Validation ....
    Tks
    Durusoju

    AT SELECTION-SCREEN - selscreen_event
    Syntax
      | { ON {para|selcrit} }
      | { ON END OF selcrit }
      | { ON BLOCK block }
      | { ON RADIOBUTTON GROUP radi }
      | { }
      | { ON {HELP-REQUEST|VALUE-REQUEST}
      |   FOR {para|selcrit-low|selcrit-high} }
      | { ON EXIT-COMMAND }.
    Alternatives:
    1. ... OUTPUT
    2. ... ON {para|selcrit}
    3. ... ON END OF selcrit
    4. ... ON BLOCK block
    5. ... ON RADIOBUTTON GROUP radi
    6. ... { }
    7. ... ON {HELP-REQUEST|VALUE-REQUEST} FOR
          {para|selcrit-low|selcrit-high} }
    8. ... ON EXIT-COMMAND
    Effect
    These additions allow individual evaluation of specific elements of the selection screens of the program. The information as to which selection has triggered the event is contained in the system field sy-dynnr.
    Alternative 1
    ... OUTPUT
    Effect
    This event is triggered at the screen event PBO of a selection screen. In the event block, the selection screen can be prepared through assignments to the data objects of parameters and selection criteria and through dynamic screen modifications.
    Note
    The assignments to input fields in the event block AT SELECTION-SCREEN OUTPUT always affect the selection screen and overwrite the user inputs from previous displays of the same selection screen. Assignments in the event blocks LOAD-OF-PROGRAM oder INITIALIZATION, on the other hand, only have an effect at first program start.
    Alternative 2
    ... ON {para|selcrit}
    Effect
    This event is triggered at the screen event PAI of a selection screen if the content of the input field of a parameter para or a line of a selection criterion selcrit was passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or an error message in the event block makes the fields para and selcrit ready for input again.
    No parameter that is defined as a radio button can be specified. For this purpose, the addition ON RADIOBUTTON GROUP is provided.
    Note
    If a user action takes place in the dialog box for the multiple selection of a selection criterion selcrit, the entries of the selection table are passed to the program, line by line. For each line, the event AT SELECTION-SCREEN ON selcrit is triggered.
    Alternative 3
    ... ON END OF selcrit
    Effect
    This event is triggered after the selection table selcrit has been fully passed to the program after a user action in the dialog box for the multiple selection has taken place. In the event block, the entire selection table can be checked.
    Alternative 4
    ... ON BLOCK block
    Effect
    This event is triggered at the screen event PAI of a selection screen if all the input fields of a block block of the selection screen were passed to the ABAP program. In the event block, the user inputs can be checked. Sending a warning or an error message in the event block makes all the fields of the block block ready for input again.
    Alternative 5
    ... ON RADIOBUTTON GROUP radi
    Effect
    This event is triggered at the screen event PAI of a selection screen if all the fields of a radio button group radi of the selection screen were passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or error message in the event block makes all the radion buttons of the block radi ready for input again.
    Note
    The individual fields of a radio button group are not passed individually and do not trigger the event AT SELECTION-SCREEN ON par.
    Alternative 6
    Effect
    The event AT SELECTION-SCREEN itself is triggered as the last event of selection screen processing if all the input values were passed to the program. In this event block, all the user inputs can be checked. Sending a warning or an error message in the event block makes all the screen fields ready for input once again.
    Alternative 7
    ... ON { HELP-REQUEST | VALUE-REQUEST } FOR
        {para|selcrit-low|selcrit-high} }
    Effect
    The two events ON HELP-REQUEST and ON VALUE-REQUEST are triggered at the screen events POH and POV of a selection screen if - for the input field of a parameter para or one of the input fields of a selection criterion selcrit - the field help F1 or the input help F4 was called. Other selection events are not triggered.
    In the event blocks, a self-defined field or input field can be programmed, which overrides any helps possibly defined in the ABAP Dictionary.
    Notes
    These event blocks can only be implemented for fields of the selection screen that are defined in the same ABAP program and not in a possibly linked logical database.
    With the events for the field and input help, no data is transported between the selection screen and the ABAP program. As with general screens, suitable function modules must be used for these. The parameters and selection criteria changed for the input help are transported to the selection screen.
    Alternative 8
    ... ON EXIT-COMMAND
    Effect
    This event is triggered if the user has called one of the functions Back, Exit or Cancel. In the event block, possible clean-up actions can be executed.
    Example
    In these executable programs, a standard selection screen and a further selection screen are defined. In the event blocks AT SELECTION-SCREEN, the inputs in the selection screens can be specially handled using the name p_carrid and the screen number in sy-dynnr.
    REPORT demo_at_selection_screen.
    Global data
    DATA: sflight_tab TYPE TABLE OF sflight,
          sflight_wa  LIKE LINE  OF sflight_tab.
    Selection screens
    PARAMETERS p_carrid TYPE spfli-carrid.
    SELECTION-SCREEN BEGIN OF SCREEN 500.
      SELECT-OPTIONS s_conn FOR sflight_wa-connid.
      DATA s_conn_wa LIKE LINE OF s_conn.
    SELECTION-SCREEN END OF SCREEN 500.
    Handling selection screen events
    AT SELECTION-SCREEN ON p_carrid.
      IF p_carrid IS INITIAL.
        MESSAGE 'Please enter a value' TYPE 'E'.
      ENDIF.
      AUTHORITY-CHECK OBJECT 'S_CARRID'
                          ID 'CARRID' FIELD p_carrid
                          ID 'ACTVT'  FIELD '03'.
      IF sy-subrc = 4.
        MESSAGE 'No authorization for carrier' TYPE 'E'.
      ELSEIF sy-subrc <> 0.
        MESSAGE 'Error in authority check' TYPE 'A'.
      ELSE.
        IF sy-ucomm = 'ONLI'.
          CALL SELECTION-SCREEN '0500'.
        ENDIF.
      ENDIF.
    AT SELECTION-SCREEN.
      IF sy-dynnr = '0500'.
        IF s_conn IS INITIAL.
          MESSAGE 'Please enter values' TYPE 'W'.
        ELSE.
          SELECT *
                 FROM sflight
                 INTO TABLE sflight_tab
                 WHERE carrid = p_carrid AND
                       connid IN s_conn.
          IF sy-subrc <> 0.
            MESSAGE 'No flights found' TYPE 'E'.
          ENDIF.
        ENDIF.
      ENDIF.
    Main program
    START-OF-SELECTION.

Maybe you are looking for