Message Correlation for EDIFACT in Oracle B2B

How do we setup message correlation in Oracle B2B for EDIFACT?

Please post your question in the B2B forum for guicker resolutions. The link is provided below
Integration - B2B

Similar Messages

Equivalent Idoc message type for EDIFACT BANSTA

Hi Experts,
I am trying to find out the equivalent IDOC message type for EDIFACT BANSTA. The purpose of the message is to show the item level statuses for a particular payment batch. There are lot of references about FINSTA01, however, this is for account level status response.
If anybody know the equivalent idoc message type for EDIFACT BANSTA, kindly let me know.
Thanks in advance.
Regards,
Ravi

Thanks raja shekar. I posted this thread in ABAP development forum.

Setting Message-ID email header from Oracle B2B backend in 11g

Hi,
Is it possible to set the Message-ID from the backend application via JMS header? Is there a JMS header exposed to set this message id in case of email transport? Will the email server able to honor this value that we set and send to Oracle B2B in 11g and send it as the email header (Message-ID)? Is this possible?
The idea here is if my backend application can set this Message-ID value of the request message, then the response message which would be a reply to the initial message will have the value of the Message-ID in the property in-reply-to. Now if this in-reply-to is also exposed an a JMS header to the backend application, then i will be able to co-relate the request and the response messages.
Please let me know at the earliest if this would be possible.
Regards
Kavitha

Kavitha,
Is it possible to set the Message-ID from the backend application via JMS header? Yes, please set the MSG_ID header (jca.jms.JMSProperty.MSG_ID). It will be used as Message-ID in Wire Message.
, then i will be able to co-relate the request and the response messages.Generic Mail does not support correlation as of now. You may consider logging an enhancement request with support. If you are exchanging XML messages then you may consider using content based correlation at B2B.
Regards,
Anuj

Composite repeator Not identified in Oracle B2B for EDIFACT

HI,
We are trying to parse an custom EDIFACT message through oracle B2B 11.g
B2B is successfully able to parse and convert the EDIFACT into XML; but, it is not able to recogonize the composite separator (group/segment separator are working fine)
ex: Group - Segment - Composite - Element1, Element2
group and segment repeatations are fine but the composite is not repeating for the second iteration.
any help on this is much appreciated
please do update if any configuration needs to be updated.
Best Regards,
Novshad

Hi Guru's,
Please respond to my problem.
Regards,
Novshad

Messages in Processing State for a long time on Oracle B2B 10 G

Messages posted for all the protocols (FTP,Email,Ebxml) are taking a long time to be processed .Usually after redeploying the agreements it was taking quite a bit of time to be processed . For one of the problems , we purged the entire configuration , imported the backed up export file and deployed all the agrreements for all the trading partners after which it is taking a long time for the messages to be processed (more than 5-6 hours) .
IS there any way to figure as to what the issue may be ?

Is this happening for inbound or outbound? Do you see any errors in the b2b.log?
Regards,
Anuj

How to send SOAP Message with Oracle B2B

Hi everyone,
I need your help to send out from Oracle B2B a SOAP message with attachment of any type of file (image, pdf, etc.). Possibly using a SOA composite application or another way, it doesn't matter. I already create an ebMS partnership with a custom document protocol and I already create a working SOA composite application to send only text message to my trading partner. I have tried this solution: http://anuj-dwivedi.blogspot.it/2011/04/ebms-attachment-handling-in-oracle-b2b.html but it doesn't work for my case... It is to be noticed that I don't give any schema to my component in the SOA application explained firstly, and I select opaque as schema.
Thanks to all, regards
Nello

Hi Anuj and thanks for your help,
I need to send an ebXML message, with SOAP, and I try to send it with a .war application written in jsp connecting to http://10.85.28.24:8001/b2b/transportServlet to send the SOAP message. The errors reported is:
javax.xml.soap.SOAPException: Unable to receive message. Received a response from url: http://10.85.28.24:8001/b2b/transportServlet with HTTP status 200 and SOAP content-type: null.
the code I write is the following (to evaluate the two "null" in the super constructor)
<%!
public class EBMSSender extends SOAPRunner
private String cpaId;
private String service;
private String action;
private String mess;
private ArrayList<String> allegati=null;
public EBMSSender(String cpaId, String service, String action, String mess, ArrayList<String> file)
super("http://10.85.28.24:8001/b2b/transportServlet","null", "null");
this.cpaId = cpaId;
this.service = service;
this.action = action;
this.mess=mess;
this.allegati=file;
@Override
protected void prepareRequest(SOAPMessage soapMessage, SOAPBody soapBody) throws SOAPException
soapBody.addChildElement(SOAPUtility.createElement("CPAId", getNsPrefix(), getNsURI(),"agr3"));
soapBody.addChildElement(SOAPUtility.createElement("service", getNsPrefix(), getNsURI(),"OracleService"));
soapBody.addChildElement(SOAPUtility.createElement("action", getNsPrefix(), getNsURI(),"Oracletohermesb"));
soapBody.addChildElement(SOAPUtility.createElement("serviceType", getNsPrefix(), getNsURI(),"OracleServiceType"));
soapBody.addChildElement(SOAPUtility.createElement("convId", getNsPrefix(), getNsURI(), "convId"));
soapBody.addChildElement(SOAPUtility.createElement("fromPartyId", getNsPrefix(), getNsURI(), "Oracle"));
soapBody.addChildElement(SOAPUtility.createElement("fromPartyType", getNsPrefix(), getNsURI(), "Name"));
soapBody.addChildElement(SOAPUtility.createElement("toPartyId", getNsPrefix(), getNsURI(), "Hermes-b"));
soapBody.addChildElement(SOAPUtility.createElement("toPartyType", getNsPrefix(), getNsURI(), "Name"));
attach(soapMessage);
protected void attach(SOAPMessage soapMessage)
String h=mess;
DataHandler dh;
AttachmentPart ap = soapMessage.createAttachmentPart(h,"text/plain");
soapMessage.addAttachmentPart(ap);
if(allegati!=null)
for(int i=0; i<allegati.size();i++)
dh=new DataHandler(new FileDataSource(new File(allegati.get(i))));
ap=soapMessage.createAttachmentPart(dh);
ap.setContentType(new MimetypesFileTypeMap().getContentType(allegati.get(i)));
ap.setContentLocation(allegati.get(i));
soapMessage.addAttachmentPart(ap);
@Override
protected void processFault(SOAPFault soapFault) throws SOAPException{}
@Override
protected Object processResponse(SOAPMessage responseMessage,SOAPBody responseBody) throws SOAPException
SOAPElement messageId = SOAPUtility.getChild(responseBody, "message_id", getNsURI());
return null;
%>
The code works fine on the other trading partner side to send ebXML message to Oracle B2B. Apart from this solution (however,it would be my favorite), I find your blog and I try to implement your solution. It works: it sends files with only text payload to the other trading partner without any problem, but if I try to send for example an image in byte array written in a file .txt, the ebxml file received has the byte array with wrong characters. it may be that I have not provided the xsd schema? in case if I wanted to send an ebXML message with text and attachments, what xsd schema do I need to provide?
or is there another way to implement a SOA composite application to send SOAP messages with attachments?
Thank for your help!, regards
Nello

Dispatcher count values for scheduling downtime in oracle b2b 11g

Hi all,
I would like to know if anyone has implemented scheduling in oracle b2b. Please share your suggestions.
1) What should be the value for 'Outbound Dispatcher Count' & 'Inbound Dispatcher Count' in case of outbound & inbound transactions for large transactions. How do we define this value? Can you give some ratio for this value to this number of transactions? Currently we expect around 8000 messages to flow in span of two hours.
2) What could be the performance issues that we can come across if any after we are done with this setup ?
Thanks

8000 messages in 2 hours is not a huge load. Please set the below values before configuring downtime -
Outbound Dispatcher Count = 1
Auto Stack Handler= true
Auto Stack Handler Interval= 1
'Inbound Dispatcher Count' is not used for downtime feature.
There will be no impact on performance.
Regards,
Anuj

INVOIC02 message structure for B2B integration.

Is there any way to export INVOIC02 IDoc message structure in XML format?
I have tried WE60 (Documentation) transaction, but it only allows to export the structure in xsd format.
Edited by: Nicky Ben on Sep 14, 2009 11:57 AM
Edited by: Nicky Ben on Sep 14, 2009 11:59 AM

Hi Sarat,
1. Oracle B2B requires Oracle Application Server - Infrastructure and Middletier. You need to use Oracle Application Server 10.1.2 as it provides both these components. Oracle Application Server 10.1.3 doesn't contain all the Infra & Middle Tier components -
it only contains :-
* Oracle HTTP Server
* Oracle Application Server Containers for J2EE (OC4J)
* Oracle Enterprise Manager 10g Application Server Control
* Oracle Business Rules
* Oracle TopLink
2. You can download Application Server Integration(10.1.2.0.2) that contains Oracle Integration B2B. You can get more information about the other components at the download page for Oracle Application Server 10.1.2.
3. You can get information about Oracle B2B at the link :-
http://www.oracle.com/technology/products/integration/b2b/index.html
4. The Quick Start Document at this link should give you a summary about B2B - features, installation, configuration ,etc...:-
http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TN_001_Installation_Quickstart.pdf
Regards,
Sandeep

Correlation for JMS Messages possible? JMSCorrID in JMSHeader not accepted

Is Correlation for communication over JMS messages possible?
If I define the JMSHeader field "JMSCorrelationID" in a correlation set ("as usual") then I get
compiler errors:
Error ORABPEL-10036: invalid correlation set
BPEL seems not to accept JMSHeader fields for correlation but only fields from the actual payload msg.
Is this true?
Is there soemwhere a guide on how to correlate JMS messages?
Thank you
Michael

you can use the "Message Selector" on the JMS adapter to filter to achieve that;
here is extract from oracle help document
Message Selector
Specify filtering logic that enables you to receive messages that match a certain criteria. Enter an expression between 1 and 255 characters in length. Use SQL92 syntax in this field. The JMS server uses this criteria to filter messages received by this consumer. The message selector works with variables defined in standard JMS headers and user-defined properties. You cannot use variables or elements that are in the payload of the message.
For example, you can enter logic such as: JMSPriority > 3. Based on this, messages with a priority greater than 3 are consumed; all other messages are rejected. JMSType = 'car' AND color = 'blue' AND weight > 2500 Country in ('UK', 'US', 'France')
it's got some limitations but works fine for our requirements so far...

Sending ebms messages between Hermes 2.0 and Oracle B2B

Hi everyone,
I'm a italian student and for my master thesis I need to create a comunication between Hermes 2 and Oracle B2B. I just set the trading partnership and the agreement with a custom ebxml document protocol. To create the soa application for the comunication I follow this instruction: http://tomhofte.blogspot.it/2009/11/how-to-configure-ebxml-communication-in.html but when I deploy my application there is this message: "The web service invocation was successful. However, there was no response to the invocation from the server." and there are no errors. Does anyone know another way to develop this application or have some information about this application?
Any kind of help is welcome, thanks.

hi,
I solved the problem! :) the message: : "The web service invocation was successful. However, there was no response to the invocation from the server." still remaiins, however I send a message to hermes B. My mistake is that I follow the second procedure, proposed by the blog I posted in the first message, to create the mediator in jdeveloper. The first procedure instead is correct.
thanks Anuj Dwivedi, yuor post has been helpful!

Oracle error "No message file for" after Upgrade to 10.2.0.5

After upgrade from 9.2.0.8 to 10.2.0.5 i get the following error "No message file for"
(with both Users sidadm and orasid)
Platform AIX 64 bit
The installation und Upgrade with dbua works fine.
DB and SAP runs after the Upgrade.
then I tried
SQL> select xx from v$log;
select xx from v$log
ERROR at line 1:
ORA-00904: Message 904 not found; No message file for produstyle='font-
family:courier' ct=RDBMS,
facility=ORA; arguments: ["XX"]
The Environment is correct,
ORACLE_HOME,ORACLE_SID,PATH,LIBPATH have right Values.
I cant find any failure in Configuration or Install Logs.
So i tried the following:
Copy the complete Directorie /oracle/SID/102_64/rdbms/msg from a
10.2.0.4 Oracle Installation to the 10.2.0.5 home.
the result ist that the Messagefile could be read by Oracle an i get
the ORA-00904
Here the same Query:
SQL> select xx from v$log;
select xx from v$log
ERROR at line 1:
ORA-00904: "XX": invalid identifier
So I do the same procedure with an other System.
I detect:
the Patch 9952230 (SAP_102051_201011/9952230) delivers
both Message Files oraus.msg and oraus.msb which caused the problem.
Has anyone the same Problem?
Are there any other Impacts with wrong Message Files .
I raised a OSS Call, but no answer till today.
best regards
Uwe

I could not find anything is sap notes, but oracle recommends to update binary file oraus.msb in $ORACLE_HOME/rdbms/mesg
Download link:
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=10235783
You can find more details also in:
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=10235783.8
https://support.oracle.com/CSP/main/article?cmd=show&type=BUG&id=10235783
The problem with this solution. It is not officially released by SAP.

How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B

Hi Friends,
How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
External Trading Partner is sending the EDI 856 via AS2 URL to our Oracle B2B Server.
In the inbound 856 agreement, we have checked the option of Funtional Ack and also Functiona Ack handled by B2B is yes.
We have the outbound agreement which is sending that Functional ack 997 (auto generated by oracle b2b) and we have specified the Outbound AS2 channel of the Partner.
997 doc is being sent to external partner using AS2 channel, but the filename is generating as '40101'.
Please can you let me know how to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
Appreciate your valuable answers!!
Thanks,
Amirineni

Amirineni,
AFAIK, there is no option to set the file name when the 997 is generated automatically by B2B.
Alternatively, if this is a must requirement, you can generate the FA from backend and send to B2B with MSG_TYPE =9. In this case, you can set the header with filename (How to set the actionname property in B2B 11g)

Correlation in Oracle B2B Transactions

Hi All, I am trying to find how do we co-relate EDI transactions when used Generic File as protocol.
Outbound Scenario:
When an EDI transaction is sent to a Trading Partner and if the host is expected to receive a TA1 acknowledgment from Trading Partner, how do we ensure the TA1 sent by Trading partner is related to the EDI transaction sent by Host.
Please advise...

Correlation with TA1 works on the basis of Interchange Control Number. Element I12 of TA1 contains the Interchange Control Number on the basis of which Oracle B2B correlates it with the corresponding request.
Regards,
Anuj

Oracle XML Gateway Message Designer for Oracle EBS R12.1.2

Goog Day to everyone!
I'm Looking for the tool "XML Gateway Message Designer". I have found in Metalink(Oracle Support) the note ID 557101.1, here explain how to get the message designer for Oracle Apps R12. It says that you have to download the patch 4066964. This patch install the Oracle Workflow Builder (2.6.3.0.1) and the Oracle XML Gateway Message Designer (2.6.3). This tools are supported to be used with Oracle Apps 11.5.10 and 12.0.X.
The release of Oracle Apps that I'm using is 12.1.2.
Questions:
- The version of the Message Designer that you get from patch 4066964 works for OraApps R12.1.2 ?
- The version of the Workflow Builder that you get from patch 4066964 works for OraApps R12.1.2 ?
- If the version of Message Designer doesn't work with OraApps R12.1.2, where can I find one that works with it?
Thanks for your advice.
LCJ

Hi Hussein,
Thanks for replay.
I downloaded the rapid install package from e-delivery. The B53824-01_4of4 was the OWB installer, and it has a readme file that says: "+This patch contains Oracle Workflow Builder (version 2.6.3.0.1) and Oracle XML Gateway Message Designer (version 2.6.3). These client tools are supported for use with an Oracle E-Business Suite Release 12.1 instance.+"
I believe, as well as you, that it should be work for 12.1.2.
I'm gonna make some test, and in a few days I will post my results.
Thanks for the help.
LCJ

Suggestion needed for processing Big Files in Oracle B2B

Hi,
We are doing a feasibility study for Using Oracle AS Integration B2B over TIBCO. We are presently using TIBCO for our B2B transactions. Now since my client company planning to Implement Fusion Middleware (Oracle ESB and Oracle BPEL), we are also looking at Oracle AS Integration B2B for B2B transactions (On other words we are planning to replace TIBCO by Oracle Integration B2B if possible).
I am really concern about one thing that is receiving and processing any "BIG FILE" (15 MB of size) from trading partner.
Present Scenario: One of our trading partner is sending Invoice documents in a single file and that file size can grow upto 15 MB of size. In our existing scenario when we receive such big files from trading partner (through TIBCO Business Connect - BC), Tibco BC works fine for 1 or 2 files but it crashes once it received multiple files of such size. What exactly happening is Whatever Memory that TIBCO BC is consuming to receive one such big file, are not getting released after processing and as a result TIBCO BC throws "OUT OF MEMORY" error after processing some files.
My questions:
     1. How robust the Oracle AS Integration B2B is, in terms of processing such big files?
     2. Is there any upper limit in terms of size that Oracle AS Integration B2B can handle for receiving and processing data?
     3. What is the average time required to receive and process such big file? (Lets say we are talking about 15MB of size).
     4. Is there any documentation availble that talks about any such big files through Oracle B2B?
Please let me know if you need more information.
Thanks in advance.
Regards,
--Kaushik

Hi Ramesh,
Thanks for your comment. We will try to do POC ASAP. I will definitely keep in touch with you during this.
Thanks bunch.
Regards,
--Kaushik

Message Correlation for EDIFACT in Oracle B2B

Similar Messages

Maybe you are looking for