Message Envelope not found. Probably empty soap message. Error while testing web service

Hi Gurus,
I'm new to web service.
I have created an RFC and a web service to create a pdf. When I try to test the web service, I'm getting an error : "Message Envelope not found. Probably empty soap message." I have tried all the links available in google, but i'm unable to resolve the issue.
Can anyone help me to solve this.
Many thanks in advance.

Which version/platform are you using?
The thing you need to consider here is that the JDev proxy settings do not affect the BPEL server.
So if the BPEL server cannot connect to your webservice, it will not be because of any Jdev setting.
Check the proxy settings on your BPEL server (on 10.1.2 developer install it will be in obsetenv.bat, on 10.1.3 it will be a commandline property of the JVM - see AS Control administration page for the JVM)

Similar Messages

Authorization error while testing Web Service in SOAP UI

Hello All,
when i am trying to test my web service in SOAP UI i am getting following error.
<faultstring xml:lang="e">Authority check failed</faultstring>
</soap-env:Fault>
I am providing user id and password of my server also. we are using ECC 6.0 server. please let me know what needs to be checked.
Kumar.

Hi Kumar
Check with this thread for Authority check failed
Web Service Homepage: Authority check failed
Regards
Abhishek

503 Service not available error while testing web service in SOAMANAGER

Hi guys,
We have created a web service in ABAP and want to test it in soamanager.
When trying to test it using the "Open Web Service navigator for selected binding" link in web service administration page we get the error page--
503 Service not available
Error: -6
Version: 7000
Component: J2EE Server
Date/Time: Thu Jul 30 10:40:50 2009
Module: http_j2ee.c
Line: 820
Server: cmphr_HRC_10
Error Tag:
Detail: Cannot reach external Application Server on localhost:51000
we have enabled the wsdl service in SICF and also the APP SOA MANAGER service.
Can anyone please help.
Thanks in advance.
Regards
Prince

Hi,
Detail: Cannot reach external Application Server on localhost:51000
51000 is the port when the j2ee engine runs. As you dont have java stack am afraid this would not work.
Regards,
Vamshi.

Authorization error while consuming web service in SOAP UI

Hi,
I am an ABAPer and do not have much knowledge about SOAMANAGER configuration.
I have created a Web service and configured it using SOAMANAGER. I am trying to consume same web service using SOAP UI.
But, I am getting an error HTTP-401 unauthorized.
For authentication, I have selected "Transport level -User ID/Password" checkbox.
What else, I have to configure, please let me know.
Error log:
Login failed
What happened?
calling the URL <URL>.
The application was running in the system <System> . Here, no credentials were provided.
What can you do?
If you still have a user ID , contact your system administrator.
HTTP 401 - Unauthorized
Your SAP Internet Communication Framework Team
Regards,
Sneha

Hi Sneha,
In SOAP UI, after importing WSDL, dig it till Request1, select it and go to Request property.
Set Below things
1. Authentication Type = Preemptive
2. give username
3 give password
and send message.
Regards,
Mastan
Message was edited by: mastan vali

Error message: 'Codec not found..'

Hi all. This is a new error I've never seen before.
It's stopping me doing anything at all really.
As soon as I start up FCP and click on a sequence I get this message: 'Codec not found. You may be using a compression type without the corresponding hardware card.'
Then I click on OK and it says 'Error - Out of memory.'
I've heard rumours that it could be the fact I'm using a strange type of JPEG, but it still happens with PNGs.
I've made sure my scratch disks are all going to the right place. I also have 100gb of free space.
The version of FCP I'm using is 6.0.5. I'm using an iMac with OSX 10.4.11 (yes, I know it's old!) and I've downloaded the latest version of Quicktime.
Help, anyone? I have an assignment due in tomorrow.
Many thanks...

What formats are your sources and sequence? Have you tried resetting your fcp preferences?
https://discussions.apple.com/docs/DOC-2491
And here are some other troubleshooting steps
https://discussions.apple.com/docs/DOC-2591
We're here to help, but unless we approach this in a systematic manner, obvious things can slip thru the cracks. So go thru these things and just let us know if there's anything amiss.
I'm in NYC also, so if you are up against the wall, and feel like bringing your trusty macbook pro by my cutting room, I could probably take a quick look at it and see if there's anything obvious.

Safari 7.0.6 crashes: Dyld Error Message: Symbol Not Found

After I did the latest MacOS update (10.9.5) Safari (7.0.6) no longer runs. I repaired permissions and also rebooted in safe mode so I could potentially remove any spurious plug-ins, but the last time I did this was with MaxOS 6 so I have no idea where to look in the current version.
The error message that pops up is:
Process:         Safari [1279]
Path:            /Applications/Safari.app/Contents/MacOS/Safari
Identifier:      com.apple.Safari
Version:         ???
Build Info:      WebBrowser-7537085010017001~4
Code Type:       X86-64 (Native)
Parent Process: launchd [194]
Responsible:     Safari [1279]
User ID:         505
Date/Time:       2014-09-26 08:16:17.066 +1000
OS Version:      Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: 84ADDFB5-CAD4-0759-3667-8E0B47E8E995
Sleep/Wake UUID: 51EC656E-25AB-4167-810D-D7A644340E28
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries, ignoring DYLD_* env vars
Dyld Error Message:
Symbol not found: __ZN3JSC10JSDataView6s_infoE
Referenced from: /System/Library/StagedFrameworks/Safari/WebCore.framework/Versions/A/WebCore
Expected in: /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
in /System/Library/StagedFrameworks/Safari/WebCore.framework/Versions/A/WebCore
(insert a 'shed load' of other lines of log data which you probably don't need, right?)

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

ORA--0001: Message -1 not found; product=RDBMS; facility=ORA

Hi All,
I am using pro*c to connect to DB. My application was working fine till today. All of a sudden without changing any application configuration I started getting error during connect.
Statement executed
EXEC SQL CONNECT :sqli_username IDENTIFIED BY :sqli_password USING :sqli_db_instance ;
All Bind variable populated correctly still getting following error.
ORA--0001: Message -1 not found; product=RDBMS; facility=ORA
I tried to debug and search on internet for problem however as you can see sqlca.sqlcode is negative value -0001 which is not mapped to logical oracle error.
I could see on oracle site
sqlca.sqlcode <0 - Means that Oracle did not execute the statement because of a database, system, network, or application error. Such errors can be fatal. When they occur, the current transaction should, in most cases, be rolled back.
But how will I understand what was exact reason for failure.
Any help or direction is very much appreciated ..
Thanks.

You probably want to make sure your $ORACLE_HOME is set correctly.
null

Hp 5535 will not scan, error message printer not found

I have a HP Envy 5535. I have only been able to scan one time with it. I scanned 22 documents, after running HP Scan Doc 4.4. Each time the HP Scan Doc states that everything is OK, yet as soon as I try to do even a test scan, I get the error message "Printer not found." I have also tried to run this scan with my McAfee virus firewall off, and it still doesn't work. I have also identified it on McAfee as part of my network.
This question was solved.
View Solution.

Hi @prazdancr,
Welcome to the HP Forums!
I am sorry that you cannot scan with your HP Envy 5535, but I am happy to help!
For further assistance I will need to know:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please try going through this scanning guide. A 'The computer is not responding' Error Message Displays During Scanning.
Hope to hear from you soon, and have a nice day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

GNU fortran90 doesn't work now. I get the error message:gfortran: warning: couldn't understand kern.osversion '14.0.0 ld: library not found for -lcrt1.o collect2: error: ld returned 1 exit status

GNU fortran 90 no longer works.
I get the error message:
gfortran: warning: couldn’t understand kern.osversion ‘14.0.0
ld: library not found for -lcrt1.o
collect2: error: ld returned 1 exit status

GNU fortran 90 no longer works.
I get the error message:
gfortran: warning: couldn’t understand kern.osversion ‘14.0.0
ld: library not found for -lcrt1.o
collect2: error: ld returned 1 exit status

Getting error message file not found unable to sync to ipod

90 percent of my music from my playlists wont load to my ipod. It has loaded in the past nut now i get message file not found unable to sync. Meanwhile I can play all of this music out of itunes I just cant seem to load it to my ipod. why? all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be. plaese help

+all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be.+
Yes, I'm sure they are related. I have no idea how your PC/itunes got into that state. What's happening now, is itunes thinks it doesn't know where the file is on your PC's hard drive, but when you double-click it, it mysteriously finds it.
I suspect after itunes finds it again, it will load to your ipod.
Is this music on an external HD?

Getting authorization error message: Required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

I have recently purchased this MacBook used and am trying to authorize it on the iTunes Store but even after uninstalling iTunes and re-installing it with a fresh copy I'm getting this error message: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." And I have no idea of where or how to fix this issue. Any help or suggestions will be greatly appreciated. I even tried to deauthorize this computer and got the same error message. HELP!

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

Itunes install error message - program not found ...x64/difxinst64.exe

itunes install error message - program not found ...x64/difxinst64.exe
no problems with ITunes on Dell Inspiron Windows 7 until yesterday. ITunes version 11.0.2. iphone won't connect stating required software is not installed. uninstall and install 64 bit version of iTunes. I have 64 bit version already. I have uninstalled and reinstalled 5 times already. When re-installing ITunes get error message c:\programdata\34be82c4-e596-4e99-a191-52c6199ebf6\x64\difxinst64.exe. file does not have a program associated with it for performing this action. please install or create an association in the Default Programs control panel. iTunes install continues after the difxinst64.exe error message but then get the iphone cannot be used error message again. therefore, I can't sync my iphone with iTunes until I figure this out.
can't win for losing. had iTunes on my windows 7 laptop for 4 years. first time I've ever encountered this.

I am a PC Tech and had a customer with this issue. Ran across this post in my search and ended up finding the solution on my own. The problem isn't with the iTunes software but the installer for the GEARAspi drivers. Really the issues is with the file type asssociations in the windows registry. On the system I was working on the HKCR key for .exe should point to the exefile key but pointed to nothing. To fix it create a new txt document and paste the following in (only paste what is in between the [code][/code] tags):
[code]
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\.exe]
@="exefile"
"Content Type"="application/x-msdownload"
[HKEY_CLASSES_ROOT\.exe\PersistentHandler]
@="{098f2470-bae0-11cd-b579-08002b30bfeb}"
[/code]
Now change the extension from .txt to .reg. Then right click and select merge. iTunes should now install properly.

Sqlldr: Message 2100 not found - No msg files in my RDBMS\Mesg dir

Hi All,
I am trying to use sqlldr on an WIN2003R3 server. This is not working and I get an error message:
MESSAGE 2100 NOT FOUND: WHEN ATTEMPTING TO START SQLLDR.
I searched the internet and there it states that this should have to do with my ORACLE_HOME or ORACLE_BASE environment variables or path. I checked those, but they seem fine.
On metalink it states two possiblities, for WIN NT,
- Removing the ORACLE_HOME env. variable
- Copy the files from another Oracle installation
(Metalink Note:171648.1 and Note:1081848.6).
I tried the first, but still doesnot work. Unfortunately I can't try the second, because all other Oracle installations I have access to are the same version, so they all have the same files in the RDBMS\Mesg directory.
My questions are:
- How many files should there be in the mentioned directory? (Now I've got 4: kgpus.msb, ocius.msb, oraus.msb, smgus.msb )
- Where can I get the missing files, or is there any other way to get around this?
- any ohter suggestions?
Thanks in advance. Any help will be appreciated,
Regards,
Toin.
Message was edited by:
Toin
Fixed a typo.
Message was edited by:
Toin

The problem is that my SQL Loader is not working under WIN NT. This is a known issue, one of the suggestions I found on metalink is to manually copy the message files that should be in ORACLE_HOME\DBMS\Mseg from another Oracle installation.
I cannot do this, because all my Oracle installations are the same. So the questions is where can I find the appropriate message files, so I can get my SQL Loader to run??
Thanks.
Toin.

Have upgraded to 6.0.2 on my MacBook and get error message "Server Not Found" everytime i use Firefox; however, if i then click on my Gmail or other sites from bookmark toolbar it connects. means an extra step and that never happened before

when i first click on Firefox the URL: www.27yhbnhy6tfgvrbcfre3.com shows up and the error message "Server not Found". but i can connect to any website by just clicking on a bookmark from the toolbar (or typing in a url). this never happened with previous versions of Firefox

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Message Envelope not found. Probably empty soap message. Error while testing web service

Similar Messages

Maybe you are looking for