Message id in the message mapping object
I'm working on a non BPM process and would like to add message id to a target field. How can do this in a simple way.
Thank you.
It works...
I used this code
GlobalContainer globalContainer1 = container.getGlobalContainer();
String b = (String) globalContainer1.getParameter("mymessid");
result.addValue(b);
Similar Messages
-
When I am writing an email, I get an alert message that says “The message could not be copied or moved to the drafts folder. Writing to the folder failed. To gain disc space, choose Empty Deleted and choose Compact Folders and try again.”
If I do that, I get a message saying “There was an error copying to the Sent folder,, retry?”
If I retry it sends the uncompleted email. All I can do is keep deleting the message and carry on. Then the whole business might repeat itself.
Help!
FrankBecause the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems... -
When I try to delete an email, I get a message whih says "The message connot be sent to the mailbox Trash. How can I delet messages?
Try going into Settings > Mail, Contacts, Calendars. Then select the account on the right-hand side of that screen, select Account, then Advanced, Deleted Mailbox, and under On The Server tap the 'Trash' folder (or whatever it is called by yor provider) so that it gets a tick against it - then come out of that series of popups by tapping on the relevant buttons at the top of them and then see if you can delete emails
-
i want to change the layout of my email messages so that the message is at the side of the headers not below them. i have just downloaded mozilla thunderbird on to my new laptop at i cant get the layout that I prefer back. please help . thanks june
''queenofpersia [[#question-1050056|said]]''
<blockquote>
i want to change the layout of my email messages so that the message is at the side of the headers not below them. i have just downloaded mozilla thunderbird on to my new laptop at i cant get the layout that I prefer back. please help . thanks june
</blockquote>
thank you so much Airmail. I had been told this was the way to do it but couldnt find the menu bar, but now I have. thank you so much for your help, so simple and yet it has made my day! best wishes june -
How to view source of email message without opening the message?
In addition to Verizon Email, I use Windows Live Mail. With Windows Live Mail I can view the source of a message without opening the message. This way I can find out if the message is legitimate or spam before potentially getting hit with malware from a bogus message by opening it. I can then set up a blocking rule so a bogus message from either the sender or the domain never appears in my Inbox. I have not found a way to do this in Verizon EMail.
Is there a way to view the source of a message without opening the message in Verizon EMail? Right clicking just opens the message which I do not want to do.computerbug,
You can get a preview of your email. Log into the Verizon account and go to email > in the top you will see
Conversations
Contacts
Calendars
Settings
Click on settings < General settings > Display and you will see 2 options for email view.
(Preview is not available, if the resolution is less than 1024 by 768 pixels)
Thanks,
Tonya D -
All the message dates in the message list changed in every mailbox to a recent date, I don't know why.. The dates within the messages' headlines themselves remained correct. How do I re-establish the correct dates also in the mailboxes' message list?
First thing is to forget all the complex configs and just try to schedule the report to run once now, no alerts, no notifications, no nothing.
Does that work?
Then you can build up the schedule, to see where the problem is coming from.
Sincerely,
Ted Ueda -
Message Tracking sees the message, but it was not delivered to the mailboxI
Hello ,
I have exchange 2010
2 HUB & CAS
2 Mailboxes
There are one mail lost , it is delivered buy it is not shown in the recipient mailbox .
I can see the mail delivered in Message Tracking sees the message, but it was not delivered to the mailbox .
I check the antispam , anti virus, transport rules and nothing
How we can investigate to check where this mail gone ?
Need help please
MCP MCSA MCSE MCT MCTS CCNAHi Yasser,
Does the issue only happen to one user with one specific message? Please check if the missing message is located in other mailbox folders such as Deleted Items folder, Junk E-mail folder. Also check the Inbox rules in Outlook.
If the message is still listed in the sender's send items folder, please close Outlook and only use OWA to re-send this message to the problematic recipient. Then check whether this recipient can receive this message in OWA or not.
Regards,
Winnie Liang
TechNet Community Support
Hello ,
how can i check all mails stuck in shadow redundancy or dumpster and not delivered ?
MCP MCSA MCSE MCT MCTS CCNA -
Dear all.
In my app use the MFMessageComposeViewController control to send SMS message.The message content will be inserted to Message Inbox of iPhone.
How to do not insert the message content in the Message Inbox when use this control?Because my message content has been encrypted. I don't want user can see them.
ThanksI can't remember the steps, but if i'm not wrong, there are many "next" to click, and at the last windows, there is one dialog box with "do not show this message again".Maybe something to do with the registry, to enable to view this dialog box again. Date: Thu, 2 Feb 2012 06:38:24 -0700
From: [email protected]
To: [email protected]
Subject: How to enable the option "do not show this message again" in dreamweaver cs5
Re: How to enable the option "do not show this message again" in dreamweaver cs5
created by Murray ACP in Dreamweaver - View the full discussion
So, you open Site manager, click New, and then what? I'm trying to understand which dialog you dismissed. Can you help me?
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4180872#4180872
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4180872#4180872. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
When sending email message appears "sending the message failed because you exceeded your sending limit. A copy has been placed in your outbox"
Who's the provider? Do they have a limit?
https://discussions.apple.com/message/22929931#22929931 -
I change phones and i am not getting regular txt messages because somehow the messages are still sending through imessage which i no longer have.... I deleted my phone number from the account though as per instructiions from the phone carrier and is still not working...Any help?
Hello jn_andrade,
It sounds like you are no longer getting text messages becuase your Apple ID is still using your phone number for iMessage. I would use these steps to unlink your phone number from your account:
Unlink a phone number
To remove a phone number from an Apple ID, sign out of FaceTime and Messages on your iPhone:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
This should remove your phone number from other devices using the same Apple ID with FaceTime and Messages. If the phone number is still available on other devices after you sign out of FaceTime and iMessage on the iPhone, you may need to sign out of iMessage and FaceTime on all your devices, then sign in to FaceTime and Messages again on devices you want to use.
Note: If you no longer have access to the iPhone that is using the number you want to remove, reset your Apple ID password.
From: iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/ht5538
Thank you for using Apple Support Communities.
Regards,
Sterling -
the bar that says sending message wont go away it just keeps saying sending message yet all the messages are gone and recieved and it just stays there, ive tried restarting booting, syncing everything i cant think of
Double tap the home button to bring up the multi-tasking bar, tap & hold any icon until they all start to wiggle, tap the red minus sign & close every app listed, tap home button when finished. Then reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release. -
My husband and I both have an i phone. When I send him a message it also sends it back to my phone. The same happens when he messages me. His messages are also picked up on my i pad.How can we correct this?
Are you both using the same Apple ID?
Also check Settings > Messages > Send & Receive > make sure it only contains your unique phone number and e-mail address de-select those entries belonging to your husband.
Do the same on his phone (de-select yours) -
Is there a way to mass/multi delete photos in all messages without deleteing the message
i have iOS 7, iPhone 4s and Mavericks.
i know i can tap and hold on the photo and the "more" option appears, then flip through the conversation and select individual messages to delete within that conversaion. but i have so many ongoing texts that i dont want to delete, and most have many photos within the message that go months back that i dont need. i dont want to delete the entire conversation but i dont need the photos embedded in the message. im tired of deleting photos from the message as soon as i read or sent a photo text. is there an option in the phone or an app that will mass delete embedded photos within all texts. either iphone or mac app would work... or a script... anything! i would even be happy with selecting all phones to delete across all messages the way the camera roll allows you to delete. its seems like an obvious option.
thanksOpen the Settings app > Notifications > Messages. Scroll down adn turn OFF "View In Lock Screen". You may want to consider setting Alert style to none, but this will not impact what happens when the screen is locked.
-
When sending an email message with attachment, the message disappears.
I send and receive messages without any problems but when I try sending a message with an attachment (using Documents to Go, IAnnotate PDF, IWork,) the message somehow disappears (it is not sent to the destination and not listed on "Sent" messages folder. Is anyone having the same issue?
Hi Jaime,
Are you saying, you are getting junk characters in the email attachment? Then pls check the following. Since you want to send Japanese fonts, please pass language 'J' in both objpack-obj_langu = '3' & doc_chng-obj_langu = '3' instead of '3' please replace it with 'J'.
Another thing which you may have to check is the SCOT device type. As I understand from my basis colleague, this may also affect your attachment fonts since the emails are sent through SCOT. Go to transaction SCOT-> Settings-> Device types for format conversion. Check whether wrong device type is defined for Japanese there. Hope this helps
Regards,
Gokul -
Modify the message type for the Message no. CK239
Hi,
I would like to change the message type E to W for the message CK239.
Is it possible?
Thanks.
Jean-MarcHi,
yep, agree with Eli. Please check this [thread|Re: T-code SE91 queries ??; on the issue of changing messages.
Rgds
Karl -
Anyone Else Not Get New Message Indicator in the Messages Section of the Menu Screen?
I have been on the phone with Technical Support numerous times and they don't seem to have an answer to this question, so I thought I would see if anyone else has experienced this. And before anyone suggests this, technical support's answer has been to pull the plug on the box to reset it and this has not worked.
The issue is with the "Messages" portion of the "Menu" screen. I know Verizon does not offer a light on your STB to let you know you have a message. Instead, you are supposed to be able to go into the Menu screen and see the word "NEW" next to "Messages" along with the picture of an envelope to let you know you have a new message.
For whatever reason, I don't get either of these indicators. I never thought I had a message until I was at a friend's house and they went into their Menu and they had "NEW" next to their Messages along with the envelope indicator. I went home and saw that I had about five messages in my Messages box, some of which were very old.
While this is not a huge deal, it still bugs me that Verizon has no answer. I thought my STB may have an issue, but other than this, they work fine. (By the way, neither of my STB give me either indicator).
So I was just wondering if anyone else had this issue, and if so, how did you get it fixed? Did Verizon have to come out and do something, did Technical Support need to do something on their end, or did you need to get new STB? One time Technical Support tried to tell me that it may be an issue with Fios in my area, but that theory was shot down when I went to my friend's house. I have never gotten either indicator, and I have had Fios for almost one year.
I would appreciate any information you have. Thanks.
Solved!
Go to Solution.VZ_Kim wrote:
Hi MiMeQu,
The indicator in the menu and the visual indicator on the front of the stb should both alert you of messages.
emphasis added in quote
It would be nice if the Verizon employees had the correct information when posting here. The indicator light hsa never been operational since I got TV service 3 1/2 years ago (as Matcarl said). The reason given by Verizon was "It confused too many users when the light came on and created excess calls to the FSC".
As for the envelope in the menu, mine used to work but also stopped working on my DVR (7216) about a month ago. To confuse matters my 2500s (2 of them) still show the envelope when there is a message.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
Maybe you are looking for
-
How do I import video from Canon Legria HF20 to iPad 2?
I have the camera connection kit, and iMovie App. The kit will import photos, but the iPad does not react at all when trying to send video files to iPad 2. Is there a utility App for iPad that will make the file format recognisable? Or is it possible
-
I like the 'landscape mode' that Nike+ goes into when you lock the ipod touch/phone and rest it horizontally. What bugs me is that because it is in lock mode the screen turns off after a few seconds. I wonder if the ability to put the application in
-
Hi Iam doing File-XI-File scenario,where i send .txt file from source to Target with out any changes. I simply pick it form source directory and place in Target. Now if there is any Space between charcters inSource ,it is replacing with '#' in target
-
Just Updated to Firefox 26.0...Hanging Worse Than Ever.
I just updated to FireFox 26.0 a few hours ago, and now when I visit a site like Wonkette.com, the browser hangs are worse than ever before...and they were bad before. My browser is hanging (becomes completely unresponsive) minutes at a time before i
-
Applying Different Product Classifications To Different Groups
Sorry if I'm missing the obvious here, but I see no way of applying different product classification updates to different groups of PCs either through WSUS or through GPOs. Originally in my environment we had one WSUS policy which my predecessor had