Message ID SXMS_MSG_GUID not getting displayed in alert inbox

Hi,
In ALRTCATDEF i have defined container element named SXMS_MSG_GUID which has ABAP Dict. Data Type SXMSMGUIDC. In the message title i have used that container element using &SXMS_MSG_GUID&. I am getting alert in my alert inbox in RWB but all the other texts are displayed except the message id. I even tried using dynamic text but no luck. Can anyone plz tell me how can i get the message id displayed in my alert inbox?
Please advice!!!
Regards,
Mateen.

Bhavesh,
The message is failing because of the error "NO_RECEIVER_CASE_ASYNC" says "No receiver could be determined". Its not related to an adapter error. I went through the note which you suggested but its not providing much help.
Regards,
Mateen.

Similar Messages

Alert is not getting displayed in Alert Inbox

Hi,
We have created a BPM with an Alert. The Alert is getting triggered in the PE but we are not able to see the alert in the alert inbox. It is neither being displayed in ALRTDISP transaction.
We have already subcribed that alert.

Hi,
Have to scheduled the background job SXMSALERT_PROCESS_DATA_GET to collect the alert message for further processing?
check this link,
http://help.sap.com/saphelp_nw04/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm
thanks,
sasi

Attachment in portal not getting displayed in SAP Inbox

Hi All.
While creating travel expense requests from Enterprise Portal, travelers create few attachments and then save the travel expense reports.
A workflow then gets triggered and these travel expense reports reach SAP Inboxes of the checkers [in the finance department].
The issue here is that these checkers do not have access to enterprise portal and they expect to see the attachments [that the traveler has created via the portal] via corresponding work items in their SAP Inboxes u2013 which currently is not happening!
I checked the trip transaction that got created [in the backend / in SAP] and found the u2018attachment listu2019 menu option in GOS being disabled [may be because there is not even one attachment that has come to the backend!]
What needs to be done so that the attachments can even be viewed from the backend / from SAP Inbox? Please suggest!
Br,
Hari

Hi,
You may have to check with the stylesheet, Check if the iVIews are using portal stylesheets from portal theme. If you want to use WD style sheets, The parameter for the web dynpro to use special theme "sap.useWebDynproStyleSheet" should be "true" (configuration adapter->webdynpro->sap.com->tcwddispwda) in visual admin. If you want to set this option for particular iViews only, then from the WD iView properties, set 'Supply Portal stylesheet' property to 'No'.
Regards,
Harini S

Message is not getting displayed.

Hi all,
I have a form with KEY_COMMIT Trigger with the code below:
DECLARE
cls_date DATE;
Duration NUMBER;
int_rate NUMBER(3,2);
PA_AMT    NUMBER(10,2);
TRMS      NUMBER;
I_RATE    NUMBER(4,2);
pl_id ParamList;
usernm VARCHAR2(20);
OLD_FDR_NO NUMBER;
BEGIN
PA_AMT:=:KEC_FDACCT_MSTR.AMOUNT;
TRMS:=SUBSTR(:GROUP_TYPE,1,2);
commit_form;
SELECT INT_RATE INTO I_RATE FROM FDSLAB_MASTR WHERE GROUP_TYPE=:GROUP_TYPE AND FDSLAB_NO=:KEC_FDACCT_MSTR.ACCT_TYPE;
DUARATION_DTL(PA_AMT,TRMS,I_RATE);
message('3- I want this message to be displayed.This is not getting displayed');
message(' ');
SELECT sap_code INTO :KEC_FDACCT_MSTR.sap_code FROM FDSLAB_MASTR WHERE GROUP_TYPE=:GROUP_TYPE AND FDSLAB_NO=:KEC_FDACCT_MSTR.ACCT_TYPE;
commit_form;
END;
In the above code, you can find DUARATION_DTL(PA_AMT,TRMS,I_RATE);
DUARATION_DTL is a Procedure which is coded in the Program Unit with the below code.
PROCEDURE DUARATION_DTL(PAMT NUMBER,QTR NUMBER,RATE NUMBER) IS
.........SOME variables declared..........
BEGIN
SOME IF ELSE statements
SOME INSERT statements
SOME UPDATE statements
COMMIT;
message('FDR No Saved Successfuly'||:KEC_FDACCT_MSTR.ACCT_FD_NO);
message('');
END;
When I run the form, Message('3') that is the message marked is not getting displayed.
Only the message in procedure DUARATION_DTL that is in green is getting displayed.
Can you let me know why?
Is there anything i should do to display this message,
Or is it because its buggy??
Help me please.
Thank You.
Oracle Forms 6i.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production

Hi AW, I actually don't want to display that message.
I want to know why is that message not getting displayed??
Is that because of the following Triggers??
Trigger:ON_MESSAGE:
if MESSAGE_CODE = 40400 then
message('FDR information saved successfully.');
message('');
else
message(MESSAGE_TEXT);
end if;
Trigger:ON_ERROR:
if ERROR_CODE = 40202 then
message('This field cannot be blank');
message(' ');
RAISE form_trigger_failure;
elsif ERROR_CODE = 41800 then
message('List of values is not available for this field.');
message(' ');
RAISE form_trigger_failure;
elsif ERROR_CODE = 40401 then
null;
else
message(ERROR_TEXT);
message(' ');
RAISE form_trigger_failure;
end if;
These above mentioned triggers are present in the form.
Is it because of these triggers , that the message is not getting displayed??
If yes, can you tell me why?

Dynamic mandatory field error message is not getting displayed in webui

Hi,
In Appointment if the importance is HIGH i made Location as mandatory.For this i enhanced BT126H_APPT/ApptDetails. In the get_p_location() method of BTACTIVITYYH i have written the code.
Now the problem is Error message for this dynamic mandatory field is not getting displayed in webui.
I debugged in DO_FINISH_INPUT error message is getting generated but it is not getting displayed in ui.
Can anybody tell where the problem is?
Thanks,
Hari.

Hi Hari,
Really sorry do not know how to convert this nug file to text
How ever quick solution for your problem would be just keep your validation in 'DO_VALIDATE_INPUT' method of the view controller.
Means even if the User clicks on SAVE , Since it fails here , it would not allow you to go further.
Thanks,
Rajesh P

Session Timeout Alert text is not getting displayed on web ui.

Hello,
In "Session Timeout Alert" pop up we are facing one issue. The pop up is getting displayed as per the value in rdisp/plugin_auto_logout parameter i.e. 1800. But the text is not getting displayed.
I have implemented the SAP Note 1877120 also. Any inputs to resolve this issue.
Thanks.

Hi Sigrid,
When we do pre activities related to OTR, need to save it in standard name space only ? could you guide me pls.
in the below we have Alias and package are standard.
1.) There are 4 texts which needs to be configured via SOTR_EDIT to get the translation according your languages implemented in your CRM.
a.) Start doing it by opening transaction SOTR_EDIT.
b.) Change to the language you would like to use.
c.) As ALIAS enter first CRM_IC_CMP_FRAME/SESSION_PING_TITLE. Click on Create and confirm the following dialogues.
d.) Enter CRM_IC_CMP_FRAME as package and the object type as WAPP.
e.) Finally enter the translation according your language from the english version (length of text: 25):
"Session Timeout Alert !"
f.) Save you changes
Repeat the steps a.) to f.) with the following aliases and options:
Jimmi

Problem in BADI, error message not getting displayed

Hello Experts,
I am facing a strange problem in BADI.
The requirement is that the user should not be allowed to change the plant field
on the screen of standard MM transctions for PO/PR amendment.
I have written the code in separate BADIs for PO and PR.
I am displaying an error message if the user tries to change the field.
For PO, it is working fine.But for PR, the same code is not working.
The control is going over to the BADI for PR and rest of the code is working fine.
But the error message is not getting displayed for PR amendment.
Can anybody please suggest the possible cause of problem and some solution to it.
Thanks in advance.

Hi
See the sample BADI code for PR which raises an exceptions and do accordingly
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method :            POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
    IF l_s_eban-estkz NE 'B'.
      CLEAR v_mtart.
      SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
      IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
        MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
      ENDIF.
    ENDIF.
    IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
      IF l_s_eban-knttp NE 'A'.
        IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' )
           AND l_s_eban-matnr EQ space.
          MESSAGE e000(zm_msg) WITH 'You cannot create'
            'a PR without material number'.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHOD.
<b>Reward points for useful Answers</b>
Regards
Anji

Support messages not getting displayed in Messages Tab - Solar01/02

Hi,
I am having an issue in displaying the support messages under the message tab of Solar01 and Solar02. If I try to create a new message, the notification pops up and also gets saved. But the message does not get displayed under the tab.
I can find that the message is properly created through transaction monitor.Even if I try to manually assign the support message number in Messages tab it gives an error saying the number does not exist.We are using SOLMAN 4.0 SP 11.
Please help. Points will be awarded for useful answers.
Regards,
J.Prabananth

Dear Prabanath,
       I am not too sure you will be able to assign numbers to support messages. Run the report CRM_DNO_MONITOR and get the full number from the report and insert the ticket number in issue messages tab and click on save and go back one screen, it will ask you if you want to save, select yes.
   That worked for me. Recently I have strugged to resolve this. We are on Solman 4.0 SP12. Check if you have all necessary permissions for you and do you have any thing in sm21 or st22 by any chance if the issue is related to support pack ?
     Let me know if there are any issues. I might be able to help you.
N

Total is not getting displayed in the ALV output.

Hi,
Total is not getting displayed in the ALV output.
I m using :REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
Are there any issues with it as the same settings are working fine with REUSE_ALV_LIST_DISPLAY
source code:
DATA: layout TYPE slis_layout_alv,
      IT_eventS TYPE slis_t_event,
      fcat   TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      rec_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
TYPES: BEGIN OF ty_tab,
      belnr TYPE dberchz-belnr,
      belzart TYPE dberchz-belzart,
      net TYPE dberchz-nettobtr,
      END OF ty_tab.
DATA: lt_tab TYPE STANDARD TABLE OF ty_tab.
SELECT belnr belzart nettobtr
FROM dberchz
INTO TABLE lt_tab[]
WHERE belnr eq '000000000001'.
if sy-subrc ne 0.
ENDIF.
* defining layout
layout-colwidth_optimize = 'X'.
layout-def_status = 'X'.
*defning event
*event
*defining field catalog
fcat-col_pos = 1.
fcat-fieldname = 'BELNR'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 2.
fcat-fieldname = 'BELZART'.
fcat-tabname = 'LT_TAB'.
APPEND fcat.
fcat-col_pos = 3.
fcat-fieldname = 'NET'.
fcat-tabname = 'LT_TAB'.
fcat-do_sum = 'X'.
APPEND fcat.
*calling alv
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
    i_callback_program             = 'YZ_PLR'
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   IT_EXCLUDING                   =
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
    is_layout                        = layout
    it_fieldcat                      = fcat[]
    i_tabname                        = 'LT_TAB'
    it_events                        = IT_EVENTS[]
*   IT_SORT                          =
*   I_TEXT                           = ' '
tables
    t_outtab                         = lt_tab[]
* EXCEPTIONS
*   PROGRAM_ERROR                    = 1
*   MAXIMUM_OF_APPENDS_REACHED       = 2
*   OTHERS                           = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks,
Gaurav

Hi
No I don't think, this is my code (based on your code) and it works fine:
TYPE-POOLS SLIS.
DATA: BEGIN OF LT_TAB OCCURS 0,
       BELNR LIKE BSEG-BELNR,
       GJAHR LIKE BSEG-GJAHR,
       WRBTR LIKE BSEG-WRBTR,
       WAERS LIKE BKPF-WAERS,
      END OF LT_TAB.
DATA: LAYOUT     TYPE SLIS_LAYOUT_ALV,
      IT_EVENTS TYPE SLIS_T_EVENT,
      FCAT       TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      REC_FCAT   TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
START-OF-SELECTION.
FCAT-COL_POS       = 1.
FCAT-FIELDNAME     = 'BELNR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'BELNR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 2.
FCAT-FIELDNAME     = 'GJAHR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'GJAHR'.
FCAT-REF_TABNAME   = 'BSEG'.
APPEND FCAT.
FCAT-COL_POS       = 3.
FCAT-FIELDNAME     = 'WRBTR'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-CFIELDNAME    = 'WAERS'.
FCAT-REF_FIELDNAME = 'WRBTR'.
FCAT-REF_TABNAME   = 'BSEG'.
FCAT-DO_SUM        = 'X'.
APPEND FCAT.
FCAT-COL_POS       = 4.
FCAT-FIELDNAME     = 'WAERS'.
FCAT-TABNAME       = 'LT_TAB'.
FCAT-REF_FIELDNAME = 'WAERS'.
FCAT-REF_TABNAME   = 'BKPF'.
FCAT-DO_SUM        = SPACE.
APPEND FCAT.
SELECT * FROM BSEG INTO CORRESPONDING FIELDS OF TABLE LT_TAB
    WHERE BUKRS = 'MAAB'
      AND BELNR = '0000000001'.
LT_TAB-WAERS = 'EUR'.
MODIFY LT_TAB FROM LT_TAB TRANSPORTING WAERS WHERE WAERS = SPACE.
*CALLING ALV
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
    EXPORTING
      I_CALLBACK_PROGRAM = 'ZPROVAMAX5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
    EXPORTING
      IS_LAYOUT   = LAYOUT
      IT_FIELDCAT = FCAT[]
      I_TABNAME   = 'LT_TAB'
      IT_EVENTS   = IT_EVENTS[]
    TABLES
      T_OUTTAB    = LT_TAB[].
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
I've also inserted a currency field
Max

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Work item not getting displayed in the portal

Hi experts,
We are creating a protoype for one of the standard HCM form for change in working time. When we initiate the process, the workflow is supposed to identify the agent(which is the manager in this case) and push the work item in the inbox of the manager.
In our issue, we are able to see the workitem in SAP inbox, but the same work item is not getting displayed in the portal.
If we try to approve from the SAP inbox, the hard coded message u201CWork item can only be executed using the Portal and the UWLu201D comes. [this comes through the method of one of the tasks 17900101 which we are using for approving the form]
We commented the message by using a Z class. Now we donu2019t get the hardcoded message, but still the workflow does not complete from here.
Can this be aan integration issue of the workflow tasks with the portal??Can someone elaborate on this??

<ItemType name="uwl.task.webflow.TS17900101.SAP_ECC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="SAP_ECC" externalType="TS17900101" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="ApproveFormApp"/>
            <Property name="WebDynproDeployableObject" value="sap.com/pa~asr~formstep"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
You have to say to your portal team to modify their XML file as above. In simple you hvae to configure the task in the portal and in the SWFVISU txn as follows with the following vizualization parameters
Task TS17900101 and visualization type is JavaWebDynpro
APPLICATION     ApproveFormApp
PACKAGE     sap.com/pa~asr~formstep

BOM is not getting displayed in case of centralized planning plant.

Dear All,
there are 2 plants for which we have centralized planning. the users have created Equipment BOM for the two plants. but in case of the second plant for which the planning plant is different from the maintenance plant, the BOM is not getting displayed in the Maintenance Order (i.e. in the components tab).
kindly through some light on it. whether i have to do some settings for it.
Regards,
Ritesh Kapoor

Hi,
Yes while using IH01, i have ticked the BOM explosion option, but when i am giving the plant there then only it is displaying the BOM of that equipment.
Also when i am creating an order for the same equipment, then it does not displays the BOm & shows the message which i have written in my previous mail.
Ritesh

Condition type freight is not getting displayed in print preview

Hi,
I created PO, and while seeing its print preview:
Condition type freight is not getting displayed.
Where i missed?
Uts

hi,
Inddition to M/08...(As given above)...
Also do check the smart form or SAP script...used for the output...check it with the ABAPer...whether the field is liable for o/p or not??
Smart form is attached at message type of message determination..
Regards
Priyanka.P

JSP is not getting displayed in add portlet repositery

Hi,
I have registered two servlet in provider.xml and I was able to
view that servlet as a portlet in add portlet repositery.
After that I wanted to add one more JSP as portlet under same
provider. So I have kept JSP in same directory where servlet is
kept. I have added JSP as portlet in Provider(i.e. provider.xml)
and given appPath and appRoot for that JSP. Whenever I am trying
to view my provider by giving following URL
http://servername/servlet/myprovider
I am getting message -
Congratulations! You have successfully reached your Provider's
Test Page.
in same page I am able to view my all portlets. in that list I
am able to view my JSP as a portlet.
Now I want to add JSP portlet in my page at that time that JSP
portlet is not getting displayed in add portlet repositery.
Can anybody tell why JSP is not getting displayed in portlet
repositery ? What should I do to get it displayed in portlet
repositery ?
Thanks in advance.
Biren

You have to refresh the Provider. They are a couple of ways to
do it.
1. Take a look at the release notes for PDK-Java.
http://portalstudio.oracle.com/servlet/page?_pageid=468&_dad=ops&
_schema=OPSTUDIO
It mentions and auto reload feature that will refresh the
provider on the PDK-Java side when you make changes to the
provider.xml. When you add portlet, you simply refresh the
repository in portal and add the new portlet to a page.
2. If you do not have the auto_reload parameter, you simply need
to refresh manually.
a. After updating the provider.xml, restart the HttpServer where
your PDK-Java Provider is located.
b. Refresh the Portlet Repository
Both these do the same thing, and should solve your problem
Sue

Characterestics is not getting displayed from ODS in Multiprovider

I have Join ODS and remote cube in Multiprovider.And data is not getting displayed from ODS fields neither char not KF getting displyed in Multiprovider.I have checked the identification in Char that Char is presend in both the Cube and ODS,But that Char has data in ODS and not in Cube so I checked Char from ODS in Identification.I am still not getting data from ODS.
Can anyone help me in it?

How many requests do u have in the ODS?
If u have only 1 then just right click on DSO and say delete data it will be faster than deleting by request wise....
What is the message u r getting when u r trying to delete the request?
Khaja

Message ID SXMS_MSG_GUID not getting displayed in alert inbox

Similar Messages

Maybe you are looking for