Message: "Logon failed. Details: Select one of the installed languages".
Hi all,
In Crystal Reports 2008 (version: 12.1.0.892) I want to make a new connection to our SAP ECC system (SAP Table, Cluster or Function). The available SAP systems as defined in my SAP Logon appear and I choose the ECC system. After entry of Client, Username and Password an error message appears:
"Logon failed. Details: Select one of the installed languages"
I'm quite sure the system tries to make the login in Dutch and that language is not installed in SAP ECC (just English and German). However, Crystal operates fully in English. Has anyone an idea why the login takes place in Dutch and how the language can be changed at login?
Thnx in advace,
Henk.
Hi Chris,
I am facing the same problem from Crystal Reports. I tried changing the locale as you instructed, but could not resolve the issue.
The difference here is, it was working perfect until a week before.
Appreciate your help on this.
Thanks & Regards,
Munir
Similar Messages
-
CCMSPING: Logon check error - Select one of the installed languages
Hi All,
For one SAP system I have logon check error (MTE: <SID>\Availability\<host>_<SID>I_<Instnr>\Logon-Check: RFC Error Message):
Select one of the installed languages
Could anybody help me resolve it?
Thanks a lot,
AlexanderCould you solve the problem?
Do you know the solution to this error message (Select one of the installed languages) regarding Logon-Check with CCMSPING?
Thanks in advance! -
SMQ1 in ECC sysfail (select one of the installed languages)
Hello Gurus
in our ECC system we are having sysfail error status in T code SMQ1 (select one of the installed languages), how to over come this
inputs are highly apprictedHi Sreeram,
For the faster response you should be more specific. As you mentioned SMQ1 i.e. you are having issue in ECC outbound. You should also mentioned the queue type, i.e. the queue is for BP, material etc... and the error message details, message class, message number.
Search service marketplace with the details and you should be able to find some oss note.
Thanks,
Vikash. -
JOB error: "Select one of the installed languages"
Dear all,
if we execute some standard program/function in background mode the job stops with the following error:
" Select one of the installed languages ".
If we execute the same standard program/function immediately after the above error all run without error.
We have the following patches level:
SAP_BASIS 700 0017 SAPKB70017
SAP_ABA 700 0017 SAPKA70017
PI_BASIS 2006_1_700 0007 SAPKIPYM07
ST-PI 2005_1_700 0006 SAPKITLQI6
SAP_BW 700 0019 SAPKW70019
SAP_AP 700 0014 SAPKNA7014
SAP_HR 600 0007 SAPKE60007
SAP_APPL 600 0014 SAPKH60014
EA-IPPE 400 0014 SAPKGPID14
EA-GLTRADE 600 0014 SAPKGPGD14
EA-RETAIL 600 0014 SAPKGPRD14
FINBASIS 600 0006 SAPK-60006INFINBASIS
EA-PS 600 0014 SAPKGPPD14
EA-FINSERV 600 0014 SAPKGPFD14
EA-HR 600 0007 SAPKGPHD07
EA-DFPS 600 0014 SAPKGPDD14
EA-APPL 600 0014 SAPKGPAD14
Any help?
Gino BonfiglioliHi Rohit,
thank you for your help
Every job that stopped show the following error:
Date Time Message text Me. cl. Me no. Me. ty
07.05.2009 09:24:55 Job started 00 516 S
07.05.2009 09:24:55 Select one of the installed languages 00 171 E
07.05.2009 09:24:55 Job cancelled after system exception ERROR_MESSAGE 00 564 A
I looked for any SAP notes but I didn't find the right one.
Gino -
RFC_ERROR_COMMUNICATION: Select one of the installed languages
Hi Experts,
When I try to test the JCO Connection created for ESS.
name : SAP_R3_SelfServiceGenerics.
I am getting the error message like below:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Select one of the installed languages
If I try to edit the same,I am getting Null Pointer Exception.
Can anyone help me out to resolve this error?
Regards,
KarthickAre you using an LDAP as your UME, or are the user records from from R/3 ?
Apparently (Ive never done it) you used to be able to force a default language by editing this file (back in the EP5 days):
<J2EE root>\WEB-INF\portal\system\properties\prtDefault.properties
Look at the following lines :
This is the default language to be used when none is specified
request.defaultlanguage=en
request.defaultcountry=us
If you prefer to have the same language for all users no matter their user locale, change the lines to this :
This is the default language to be used when none is specified
request.mandatorylanguage=en
request.mandatorycountry=us
I hope this works out for you -
Error "Select one of the installed languages"
Hi guys,
I'm completely new to WAD. So i'm trying to publish a simple application to see how it works. But when i select "Execute" my browser is opened but the webpage shown is an error 500 saying "Select one of the installed languages".
I didn't find where i could select a language. I also checked that my browser has English language. But the message seems more to come from SAP side (it's kind of the same you get in SAPLogon.
Any help would be welcome :-).
Thanks in advance,
Thomashi
check this link
http://help.sap.com/saphelp_nw04/helpdata/en/9e/9f653ade969f4de10000000a114084/content.htm
or for internal modeling follow this procedure
The language settings enable you to set the following parameters for accessing worklists:
Source language
Target language
Translation area
Another target language in which translations or proposal pool entries can be displayed for reference purposes
The source and target language settings also apply to your statistics display in transaction SLLS.
Procedure
1. Call up transaction SE63.
2. Choose Utilities u2192Settings.
3. Select the Languages tab page.
4. Enter the translation area in which you usually translate. To display a list of available translation areas, use the input help.
5. Enter source and target languages for the worklists you want to call up.
6. In the Text Display in Other Language field, enter another target language in which you want to display translations or proposal pool entries when working in the short text editor. Otherwise, you need to select the required target language in a dialog box.
Result
These parameters take effect the next time you call up a worklist. You can change them manually if you want to call up a worklist for a target language other than your default target language
Regards
Santosh -
Select one of the installed languages- Idoc stuck in sm58
Hi,
We have observed a strange issue during testing.
Some interface Idocs going from R/3 system to XI got stuck in sm58 with error
Select one of the installed languages
Later it was found that language EN was not specified in RFC destination and in the user profile which was being used in this RFC.
It was fixed and interface was working fine.
What I was not able to understand was why other interfaces were processing Idocs successfully using the same RFC destination?
regards,
AnirudhHello,
Are your other interfaces still using the same RFC destination and port to PI , or do you have differnt? if different that could explain your issue..... -
RZ20 Error - Select one of the installed languages
Dear All Experts,
I am facing error in RZ20 with this below description -
Select one of the installed languages
Any of you have been encountered with same error please advice.
All of your valuable guidance will be appreciable.
Regards,
Tayyeb.Hello Tayyeb,
The reason is the Language you are trying to use is not installed in the System.
Ask your Basis Admin or Sys Admin to check the Transaction SMLT --> and check whether the language is installed in the system.
Thanks
SM -
Sneak Preview "select one of the installed languages"
Hello,
I have installed Sneak Preview 2004s ABAP.
If I logon with an empty language field, it runs fine, but in english.
I would like to use German, but when I enter "DE" into the field, I get above Error Message.
Is it possible to change Sneak Preview to German ?
Thanks
ArminHello,
meanwhile I have solved the problem.
For anybody, who has the same problem, the solution is here:
Edit the file:
<Drive:>\usr\sap\NSP\SYS\profile\NSP_DVEBMGS00_<hostname>
Find the line:
zcsa/installed_languages = E
Remark the line to:
#zcsa/installed_languages = E
Armin -
Revision: 1263
Author: [email protected]
Date: 2008-04-16 12:25:02 -0700 (Wed, 16 Apr 2008)
Log Message:
Update language selection code so that you can actually select one of the new languages I recently added.
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/Context.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/ContextStatics.javaRevision: 1263
Author: [email protected]
Date: 2008-04-16 12:25:02 -0700 (Wed, 16 Apr 2008)
Log Message:
Update language selection code so that you can actually select one of the new languages I recently added.
Modified Paths:
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/Context.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/ContextStatics.java -
Recurring "connection failed" when selecting TimeCapsule in the sidebar (internet connection works fine). Clicking "Connect As" starts the cyle over again but ends in "There was a problem connection to the server" message. Only fix is resetting TC.
The TC is the wifi base station, also have AirportExpress on the network, both of which work fine. The TC has an external disc connected as well, which is also visible in the sidebar but also cannot be connected to. Several MB computers use the network, all of which either can or cannot connect to the TC disc depending on when it is acting up.
Any ideas other than clicking "connect as" or powering down the network every time?Read up how to install 5.6 utility into ML.. it is pretty easy.
I downloaded 5.6
http://support.apple.com/kb/DL1482
Download unpkg
http://www.timdoug.com/unpkg/
Open the dmg to get the pkg.. drag it onto unpkg.. and it will create a directory under desktop with all the files.. drag the application to the utility directory.. or just run it direct.
Google if you want more explicit instructions.
Much easier with a real tool instead of a toy.
Hold the option key when you select firmware update.. all the old ones will appear.
But this will not work on newer Gen4.. only on every other model and early Gen4. .I do not know when they turned the corner and started this only 7.6 nonsense. -
The Recovery attempt has failed.Sel​ect one of the following buttons:
HP Pavillion DV5-2074dx.Trying to restore system to factory settings with Recovery DVD's from HP. After 2 nd DVD loaded then a Supplemental cd is inserted, then system restarts. Looks like everything is going to continue, loading recovery system, but the a message "Recovery Manager" windows shows with the following message "The Recovery attempt has failed.Select one of the following buttons: Save log Details Retry . If Retry button chosed, program ask to insert the recovery media and restarts and try to reinstall the recovery system again. I tried 3 times already.I cleaned the DVD's , I tried with a New Hard drive, without battery, removed one at the time memory modules and the same resault. Please somebody may have a solution for it???
If your wifi is switched off, this will happen. Check to see if your wifi switch is on, and if not, try it again.
-
I was downloading a app from the app store and it downloaded about 85% then gave an error message download failed but when I reopen the app store to the purchases the resume button show but when i click it the same error comes up failed to download
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
I used to be able to email photos from my Lightroom software 5.7 for MAC quite successfully. I needed to change my password several days ago in my gmail account. Now when I try to email photos I receive a message saying "Failed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly."
I have been trying to get help from Adobe for 3 days. I have sent a message through "Get Support", 2 days ago, but no one has contacted me. I have tried by phone, but no one will help me. When I purchased Lightroom in May, 2014, I was able to receive phone help. I am now told that I don't qualify because I am not a Creative Cloud customer. I have been assigned a case number 186291729.
PLEASE HELP ME FIX THIS PROBLEMI, too, have this problem. I see no one is responding with a solution? Hello? Can someone please advise?
Oh, and, yes, I have manually verified repeatedly that the information I gave to Lightroom is correct, and I still get the same error message when I try to validate. -
Selecting one of the dual processor on Windows
I looking for a way to programactically select one of the processor on on Dual processor windows machine/
LabVIEW or CVi works. If dll is availiable that is alos fine.
I read couple a article in the discussion forum mentioned NI had a LabVIEW exe that does this.
Can any one point to it
Sincerely,
Naresh Kumar ShenkeshiNaresh,
The last topic applies to multiprocessor systems. Assigning certain threads to particular processors is something that must be done through SDK functions, it's NOT in the CVI libraries or LabVIEW. The reasons this functionality isn't included is because it's a very simple SDK call that CVI could not have made any simpler. The SDK function SetThreadIdealProcessor (ThreadId, ProcessNum) can be called to assign ThreadId to a zero based ProcessNum. The ThreadID can be obtained from a CVI call(for e.g) and the number of processors on the machine can be determined from a CVI call to CmtGetNumberOfProcessors. Keep in mind only Windows NT and 2000 support multiprocessors systems.
More detailed information on all these topics and some additional topics are in
cluded in the PDF below.
You can also find more details on SDK at the Microsoft Website: www.msdn.com
Finally the exe file you're mentionning was probably part of a demo and not available for download.
Regards,
Cyril Bouton
Applications Engineer
National Instruments
Cyril Bouton
Active LabVIEW Developper
Attachments:
MultithreadingOverview.pdf 78 KB
Maybe you are looking for
-
How do I download Firefox for Windows XP on an iMac?
I have just installed Windows XP on an iMac (which otherwise runs Mac OS 10.6.3). I want to download Firefox to run under XP on it, but of course I have no browser on that part of the machine, so I tried to download it through the Firefox on my Mac O
-
Is it possible to buy OS 10.4 Tiger
I have some software which doesn't run under Leopard. I'd like to make a partition with OS Tiger. Would anybody sell it?
-
Messages (in and out) frequently turn "from" or "to" information lines into gibberish, e.g., "(my name and email address) wrote:" appears as, "Yknnkco"Jcttcj" >d4jcttcjBekvoqo0pgv @" Similarly, when I copy and paste from MSWord to outgoing Mail messa
-
Wireless connection not working
For no apparent reason... I am getting this message "the settings saved on your computer for the network do not match the requirements of the network". I reset the router, checked all the connections to the modem etc. and went through the setup agai
-
Hello, I tried to figure out how to mute all silence parts in an audio but didn't find an easy way to do it with Audition.. It's difficult to choose every silent part of the track and apply mute effect on it.. So anybody knows how to achieve that eas