Message no. DS017 Program 4FBU does not exist

When I run FM Report Painter "Budget Consumption", there is Message no. DS017 Program 4FBU does not exist. How could I resolve?
Regards
Ton

Hi Eli
Thank you for your advised. I found that the report "4FBUDCON" & "4FBUDGET" in library 4FM are not assigned to report group.
I use GR59 to import library "4FBC" & "4FBU" that missing from my target client. These report is in Library "4FM" and Table "FMRBCS" (compliance with reports). Then, I go to GR52 to generate Report Group but the message appeared :
- Report 4FM 4FBUDCON does not exist.
- Report group 4FBC does not contain any reports
So I try GRR3 to execute report and the system request to assign this report to report group. I assign report group 4FBC, the below message occurred.
- Objects with leading numerals may not be created.
My issue is related with T-Code FMRP_RW_BUDCON - Overview of Budget Consumption cannot be executed. SE93 advisewd that this T-Code related to Report Group 4FBC, while I cannot generate report group 4FBC.
In FME2, I tried execute all reports but It seem like not related to this t-code. Could you please advice more for report copying process from source client 000?
Regards,
Ton

Similar Messages

  • Program SMIGR_CREATE_DLL does not exist

    Hellio
    While doing a Hetergeneous System copy of Solution Manager system (Database Independent)
    and I am performing the Step to generate DDL.
    When I execute the SMIGR_CREATE_DLL ,
    I get the message "Program SMIGR_CREATE_DLL does not Exist".
    Can anyone suggest since this is SAP Standard program, how do I generate DDL required for the system export?
    Thanks

    Hi,
    > When I execute the SMIGR_CREATE_DLL ,
    > I get the message "Program SMIGR_CREATE_DLL does not Exist".
    >
    Program is SMIGR_CREATE_DDL not SMIGR_CREATE_DLL.
    Thanks
    Sunny

  • Processing routine ENTRY in program ZRVADIN0111 does not exist for smartfor

    Hi ,
    This is the log , I am getting in vf02 ..
    ==========log==============
    Message Text
    Processing routine ENTRY in program ZRVADIN0111 does not exist
    Technical Data
    Message type__________ E (Error)
    Message class_________ VN (Output control)
    Message number________ 068
    Message variable 1____ ENTRY
    Message variable 2____ ZRVADIN0111
    Message variable 3____ 
    Message variable 4____ 
    Message Attributes
    Level of detail_______ 
    Problem class_________ 0
    Sort criterion________ 
    Number________________ 1
    ======================================end log========================
    My driver program is same as below and form is ZSUNDRY_INVOICES_VENU'
    ================my driver program ===================
    *& Report  ZRVADIN0111
    REPORT  ZRVADIN0111.
    TABLES : nast.
    *TYPES : BEGIN OF ty_header,
           vbeln TYPE vbeln_vf,
           fkdat TYPE fkdat,
           XBLNR TYPE XBLNR_V1,
           STCEG TYPE STCEG,
           kunrg TYPE KUNRG,
           name1 TYPE AD_NAME1,
           city1 TYPE AD_CITY1,
           post_code1 TYPE AD_PSTCD1,
           street TYPE AD_STREET,
           total TYPE NETWR_FP,
           END OF ty_header.
    DATA : sum TYPE i VALUE '0'.
    *TYPES : BEGIN OF ty_item,
           matnr TYPE matnr,
           arktx TYPE arktx,
           fkimg TYPE fkimg,
           VRKME TYPE VRKME,
           netwr TYPE NETWR_FP,
           MWSBP TYPE MWSBP,
           unipr TYPE NETWR_FP,
           END OF ty_item.
    DATA : gs_header TYPE zsd_inv_header,
           it_item TYPE STANDARD TABLE OF zsd_inv_items.
    FIELD-SYMBOLS : <fs_item> TYPE zsd_inv_items.
    DATA : gv_adrnr TYPE adrnr.
    *data: s_vbeln type vbeln_vf.
    *select-options : so_vbeln for s_vbeln.
    *START-OF-SELECTION.
    *form entry.
    *--- Get header
      SELECT SINGLE vbeln fkdat xblnr stceg kunrg bukrs
               FROM vbrk INTO gs_header
               WHERE vbeln = nast-objky.
      SELECT matnr arktx fkimg vrkme netwr mwsbp
           INTO CORRESPONDING FIELDS OF TABLE it_item
           FROM vbrp WHERE vbeln = gs_header-vbeln.
        LOOP AT it_item ASSIGNING <fs_item>.
          <fs_item>-unipr = <fs_item>-netwr / <fs_item>-fkimg.
          sum = sum + <fs_item>-netwr.
          ENDLOOP .
          gs_header-total = sum.
          CLEAR : gv_adrnr.
    SELECT SINGLE adrnr FROM kna1 INTO gv_adrnr WHERE kunnr = gs_header-kunrg.
       SELECT SINGLE name1 city1 post_code1 street FROM adrc
              INTO (gs_header-name1,gs_header-city1,gs_header-post_code1,gs_header-street)
              WHERE ADDRNUMBER = gv_adrnr.
    *end-OF-SELECTION.
    data: fm_name type rs38l_fnam.
    ****calling entry routine
    *FORM entry USING return_code us_screen.
    CLEAR retcode.
    xscreen = us_screen.
    PERFORM processing USING us_screen.
    CASE retcode.
       WHEN 0.
         return_code = 0.
       WHEN 3.
         return_code = 3.
       WHEN OTHERS.
         return_code = 1.
    ENDCASE.
    *ENDFORM.                    "entry
    calling smartfrom from ABAP
    call function 'SSF_FUNCTION_MODULE_NAME'
      exporting
        formname                 = 'ZSUNDRY_INVOICES_VENU'
      VARIANT                  = ' '
      DIRECT_CALL              = ' '
      IMPORTING
        FM_NAME                  = FM_NAME
      EXCEPTIONS
        NO_FORM                  = 1
        NO_FUNCTION_MODULE       = 2
        OTHERS                   = 3.
    if sy-subrc <> 0.
       WRITE: / 'ERROR 1'.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    CALL FUNCTION fm_name
      EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
      CONTROL_PARAMETERS         =
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
      OUTPUT_OPTIONS             =
      USER_SETTINGS              = 'X'
        IS_HEADER                  = gs_header
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
      TABLES
        IT_ITEMS                   = it_item
    EXCEPTIONS
      FORMATTING_ERROR           = 1
      INTERNAL_ERROR             = 2
      SEND_ERROR                 = 3
      USER_CANCELED              = 4
      OTHERS                     = 5
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    *call function FM_NAME
    EXPORTING
      ARCHIVE_INDEX              =
      ARCHIVE_INDEX_TAB          =
      ARCHIVE_PARAMETERS         =
      CONTROL_PARAMETERS         =
      MAIL_APPL_OBJ              =
      MAIL_RECIPIENT             =
      MAIL_SENDER                =
      OUTPUT_OPTIONS             =
      USER_SETTINGS              = 'X'
    IMPORTING
      DOCUMENT_OUTPUT_INFO       =
      JOB_OUTPUT_INFO            =
      JOB_OUTPUT_OPTIONS         =
    TABLES
       GS_MKPF                    = INT_MKPF
    EXCEPTIONS
       FORMATTING_ERROR           = 1
       INTERNAL_ERROR             = 2
       SEND_ERROR                 = 3
       USER_CANCELED              = 4
       OTHERS                     = 5.
    *if sy-subrc <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    *endif.
    end of call function module from abap
    *endform.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    can any body help me with proper code , i have to insert in driver program ..to retify error ...
    thanks
    Regards,
    Venu.

    Call transaction NACE (type V1 for Sales Order) look for the required output type and check program and form in processing routines. (and add code markups when you copy source code in forums)
    Regards,
    Raymond

  • StartInstance: Program SAPSTART does not exist (PASE or ILE)

    Hi
       Found that the client has 2 CRM systems using the same 700 Unicode (patch 72) kernel so had to split them.
    Stopped SAP on both systems
    Created a new lib for the QAS system
    RMVSAP QAS - unhook the QAS system
    LODSAPKRN to put SAPEXE in from R3SAV700U
    LODSAPKRN to put SAPEXEDB in from R3SAV700U
    APYSAP QAS
    so far so good.......
    The QAS CRM system wont start & we get the message
    "StartInstance: Program SAPSTART does not exist (PASE or ILE)"
    Any one come accross this one?
    Thanks
    Matt
    PS Happy New Year to all us AS/400 pilgrims.....

    Hi Margie,
    happy new year !
    tja, the recommendations ...
    I fully agree, that as of 7.10 (not out yet) this is necessary, advisable and so on. But with 6.40 and 7.00 Kernels it is really not an issue ...
    EXCEPT: The recommendation from SAP ...
    "Something about each requiring their own links to the exe programs and possibly stepping on each other."
    This is DEFINETELY wrong at the moment. For, sure, it is necessary to use APYR3KRN (or APYSAP) as you are used to from the past - and you need to do that for EACH SID if you would change the contents of the kernel lib.
    => If you are using one kernel lib MY recommendation is:
    Do NOT update the kernel lib itself, but use a different one instead.
    i.e.: if you go to a new kernel patch, copy the old lib first !
    Even when you update TP etc. only, do NOT do this in the old kernel lib, copy it first and then do the update. Otherwise, you might miss one of your 5 SIDs to use APYSAP there - which is REALLY necessary after every APYR3KRN since 6.40 ...
    If you go with this approach I had never any issues )
    Regards
    Volker Gueldenpfennig, consolut.gmbh
    http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

  • Error "Processing routine ENTRY in program ztest does not exist"

    Hi All ,
               I facing problem in Samrt form  driver program
            Error "Processing routine ENTRY in program ztest does not exist"
             when i given print through T.Code Me22n
             Can you suggest  me why i facing this problem.........
      This is below my driver program code:
    Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code
    Edited by: Rob Burbank on Mar 10, 2010 9:53 AM

    Hi nIck,
             I  write the code this way
              can you suggest me any changes are require
      FORM ENTRY USING RETURN_CODE TYPE I US_SCREEN TYPE C.
      PERFORM DATA_FETCH.
      PERFORM DATA_PROCESS.
      PERFORM CALL_FORM.
    ENDFORM.                    "entry
    *&      Form  data_fetch
          text
    FORM DATA_FETCH.
      PONUMBER = NAST-OBJKY.
    ENDFORM.                    "data_fetch
    Regards
    Raju
    Edited by: raju mahapatra on Mar 11, 2010 7:23 AM

  • Processing routine ENTRY in program ZINVOICE does not exist

    Hi all,
    I am finding an error after taking the print out of Excise Invoice in Tcode J1IP.
         We had a requirement where we created new output type and  changed  the driver program for the output assignment earlier this invoice was developed in script we changed it to a smartform. and assigned in NACE.
    Its working fine we r getting the printout also after getting the print out when I goto tcode VF02 a error log is being created
    when i click on the error log its showing
    Processing routine ENTRY in program ZINVOICE does not exist
    Zinvoice is the driver program.
    I hope to get inputs from you in resolving the issue.
    Hope to get the reply at the earliest
    Shivakumar K B
    9886920258

    This error message is quite tricky and misleading one.
    Make sure in your custom program, all the logic must be in a FORM-ENDFORM.
    form entry.
    Logic...
    endform.
    this form may have any name (not needed to be only ENTRY).
    The signification of the form is that this name will be given in the subroutine name in NACE transaction.
    the standard program RSNAST00 which triggers all the print program dynamically.
    it will fetch the name of the print program and form name from TNAPR table and calls the same.
    perform (TNAPR-RONAM) in (TNAPR-PROGNAME).
    At run time, the TNAPR-RONAM and progname will be filled with your z program name and the subroutine name.
    Rgds,
    SaiRam

  • Processing routine ENTRY in program zprog does not exist

    Hi experts,
    when i try to see print preview from ME23N it is showing status message like below....
    "Processing routine ENTRY in program prog does not exist"
    Message no. VN068
    Any help....
    Regards
    Ram

    As per my understanding, when you press print priview sap script is called by this.
    This sap script name and its driver routing in maintained in a database table .check t*
    As per the message this is missing.You need to update the processing routing in this table.
    Hope this helps you.

  • S_ALR_87012245: the Program RFMXCTOP does not exist ...

    Hi All,
    launching t.code S_ALR_87012245 SAP gives me dthe message: Program RFMXCTOP does not exist
    What does it depend on?
    Thanks
    Gandalf

    Hi,
    have a look at this OSS Note:
    https://service.sap.com/sap/support/notes/842283
    Best regards.

  • While creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

    while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305

    I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
    Can you give an evidence that material 5 exists? e.g. screenshot from  SE16 at table MARA, MARC and MAST

  • Message R1206 BP Role FS0000 does not exist

    Hi team support,
    I have an error when I try to assign a new role to the BP,  the system display the Message R1206 BP Role FS0000 does not exist.  Then press enter and the message is  error in conversion customizing  for adress type. I have applied  the note 584871 but I get the same error.
    We are release 600 support package level 7.  I 'm looking for a note oss to fix it.
    Best regards,
    Paula Andrea

    Hi Paula,
    It is quite late (and my experience relates to another module), but this may still help somebody:
    I got the same eror (R1206) in Flexible Real Estate for role TR0600. To resolve it, I had to go to SPRO -> Flexible Real Estate Management (RE-FX) -> Business Partner -> Relevant settings for business partner in RE context -> Business partner roles -> Define BP roles (view V_TB003). Here I chose the required role and unticked "Hide" (V_TB003-XSUPPRESS). After that, the message disappered.
    You may need to find a similar setting in your module and also untick "Hide" - this may resolve your issue as well. Try that.
    Good luck!

  • Error in Local Message System: RFC destination MB3AP1039 does not exist.

    Error in Local Message System: RFC destination MB3AP1039 does not exist. Message was Not Created
    Message no. BCOS088
    Hi,
         When iam creating a message from any system from HELP-CREATE SUPPORT MESSAGE it is throwing the above error message. Actually i need to send this message to SAP solution Manager Service Desk.
    Can anyone help me in resolving the above issue.
    Thanks & Regards,
    Mirza Kaleemulla Baig.

    Dear friend
    You have to of following option
    1.Define Service Desk destination in the R/3 systems:
    Note: for this you need to log in the R/3 system.
    Create the RFC between the Solution manager and R/3 system (Login to the R/3 system)
    2.a. Go to transaction SM30.
    b. In table/view field, enter BCOS_CUST. Then press the Maintain Button. See example below:
    c. Press the Continue button in the following screen:
    d. You should see the following screen, no entries should be seen in the table. Press the New Entries button:
    e. In the next screen, enter the following information:
    In the RFC Destination you should point to your Solution Manager destination RFC.
    0ss_msg   w   sm_bsmclnt_back    cust620     1.0
    shailesh

  • I am getting this error message "ORA-01006: bind variable does not exist.

    My code works fine like this:
    DECLARE
    v_JOBTYPE varchar2(8);
    v_STATUS varchar2(8);
    v_FAILURE varchar2(8);
    v_CAUSE varchar2(8);
    v_ACTION varchar2(8);
    BEGIN
    SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE
    INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE
    FROM R5EVENTS WHERE ROWID = :ROWID;
    IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_JOBTYPE , 'X') IN ('BRKD','UNPLBRKD','FILTRA', 'LUB', 'FAC') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
    RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
    END IF;
    END;
    But I want to change the code to include a record (ACT_TRADE) from another table(R5ACTIVITIES). I am getting this error message "ORA-01006: bind variable does not exist - POST-UPDATE 200Before Binding". Any help would be appreciated.
    DECLARE
    v_STATUS varchar2(8);
    v_FAILURE varchar2(8);
    v_CAUSE varchar2(8);
    v_ACTION varchar2(8);
    V_CODE varchar2(8);
    V_EVENT varchar2(8);
    V_TRADE varchar2(8);
    BEGIN
    SELECT R5EVENTS.EVT_STATUS, R5EVENTS.EVT_FAILURE, R5EVENTS.EVT_CAUSE, R5EVENTS.EVT_ACTION, R5EVENTS.EVT_CODE, R5ACTIVITIES.ACT_EVENT, R5ACTIVITIES.ACT_TRADE
    INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, V_CODE, V_EVENT, V_TRADE
    FROM R5EVENTS, R5ACTIVITIES WHERE V_CODE = :V_EVENT;
    IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_TRADE , 'X') IN ('MTM','MTL','MTMGT', 'FTM', 'FTL', 'FTMGT', 'R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
    RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
    END IF;
    END;

    Thank you for your responses. Your feedback was helpful. This is what I ended up doing for a solution:
    DECLARE
    v_JOBTYPE varchar2(8);
    v_STATUS varchar2(8);
    v_FAILURE varchar2(8);
    v_CAUSE varchar2(8);
    v_ACTION varchar2(8);
    v_GROUP varchar2(30);
    BEGIN
    SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE, USR_GROUP
    INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE, v_GROUP
    FROM R5EVENTS, R5USERS WHERE R5EVENTS.ROWID = :ROWID
    AND USR_CODE = O7SESS.CUR_USER;
    IF NVL(v_STATUS, 'X') = 'C' AND NVL(V_GROUP,'X') IN ('MTM','MTL','MTMGT','FTL','FTMGTS','PLANNER','DISPATCH','PMCOOR','R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
    RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
    END IF;
    END;

  • Error message Indesign:Either the file does not exist, you do not have read access to it, or use the file in another application.

    I've got problem with opening a file in InDesign. The file type is an InDesign Markup Document. The error message is: Either the file does not exist, you do not have read access to it, or use the file in another application. What's wrong?

  • Error message: Entry 1 WC 99 does not exist in T508A (check entry)

    Can anyone please tell me what does the error message Entry "1 WC 99" does not exist in T508A (check entry) means? I was trying to 'generate work schedule manually' when got this error.  In the above error message, 1 means employee subgroup grouping.....WC is Holiday Calender......and 99 is personal subarea grouping.....
    I went to the table using se16 but could not make out how I can input those entries in the table....
    Edited by: Parveez Sazzad on Feb 26, 2011 4:56 PM

    you have to check this table from SM30 Tcode and give V_T508A table here we have to configure DWSR and than we have to generate the WSR

  • Error: "Message short text 26 107 does not exist"

    Hi DS Expert,
    We've upgraded our DS from 3.2 into 4.2.
    But sometimes several jobs fail with error: "Message short text 26 107 does not exist".
    This error does not occur in DS 3.2.
    Please help...
    Thank you.

    Hi,
    Such a message seems to be SAP/BI related.
    check wether you had shortdumps in your connected SAP system.
    In DS there are no "long/medium/short-" texts stored.

Maybe you are looking for