Message R1206 BP Role FS0000 does not exist

Hi team support,
I have an error when I try to assign a new role to the BP, the system display the Message R1206 BP Role FS0000 does not exist. Then press enter and the message is error in conversion customizing for adress type. I have applied the note 584871 but I get the same error.
We are release 600 support package level 7. I 'm looking for a note oss to fix it.
Best regards,
Paula Andrea

Hi Paula,
It is quite late (and my experience relates to another module), but this may still help somebody:
I got the same eror (R1206) in Flexible Real Estate for role TR0600. To resolve it, I had to go to SPRO -> Flexible Real Estate Management (RE-FX) -> Business Partner -> Relevant settings for business partner in RE context -> Business partner roles -> Define BP roles (view V_TB003). Here I chose the required role and unticked "Hide" (V_TB003-XSUPPRESS). After that, the message disappered.
You may need to find a similar setting in your module and also untick "Hide" - this may resolve your issue as well. Try that.
Good luck!

Similar Messages

BP role UDM000 does not exist Message no. R1206

Hi Team,
I have created New BP role ZUDM0PY by copy of standard UDM000. Everything is working well , when I choose "Display BP" in Worklist   system throws error "BP role UDM000 does not exist Message no. R1206"
My doubt is if i am using BP role ZUDM0PY not UDM000 then why system throwing error for BP role UDM000? and what will be the solution.
Regards
Arun

Hi Arun.
I don't know why but 'Display Business partner' icon can shows only 'UDM000' now.
Please refer SAP Function UDM_WORKLIST_BUS_PARTNER_SHOW specified only 'UDM000' as follows.
*Prepare the parameters for displaying Bus Partner details
   SET PARAMETER ID 'BPO' FIELD 'UDM000'.
   SET PARAMETER ID 'BPOG' FIELD 'UDM000'.
   swc_create_object handle 'BUS1006' l_bpartnerid.
   swc_call_method handle 'DISPLAY' container.
No confidence but Is BP Role Cat. in configuration 'Define BP Roles' should be 'UDM000' ???

While creating SAP ISU Device category i got one error message like The material 5 does not exist or is not activated Message no. M3305

while creating SAP ISU Device category EG01 .i got one error message like The material 5 does not exist or is not activated Message no. M3305

I don't know EG01 transaction, but if SAP says "material 5 does not exist " then SAP is usually right.
Can you give an evidence that material 5 exists? e.g. screenshot from SE16 at table MARA, MARC and MAST

Error in Local Message System: RFC destination MB3AP1039 does not exist.

Error in Local Message System: RFC destination MB3AP1039 does not exist. Message was Not Created
Message no. BCOS088
Hi,
When iam creating a message from any system from HELP-CREATE SUPPORT MESSAGE it is throwing the above error message. Actually i need to send this message to SAP solution Manager Service Desk.
Can anyone help me in resolving the above issue.
Thanks & Regards,
Mirza Kaleemulla Baig.

Dear friend
You have to of following option
1.Define Service Desk destination in the R/3 systems:
Note: for this you need to log in the R/3 system.
Create the RFC between the Solution manager and R/3 system (Login to the R/3 system)
2.a. Go to transaction SM30.
b. In table/view field, enter BCOS_CUST. Then press the Maintain Button. See example below:
c. Press the Continue button in the following screen:
d. You should see the following screen, no entries should be seen in the table. Press the New Entries button:
e. In the next screen, enter the following information:
In the RFC Destination you should point to your Solution Manager destination RFC.
0ss_msg w sm_bsmclnt_back cust620 1.0
shailesh

I am getting this error message "ORA-01006: bind variable does not exist.

My code works fine like this:
DECLARE
v_JOBTYPE varchar2(8);
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
BEGIN
SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE
FROM R5EVENTS WHERE ROWID = :ROWID;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_JOBTYPE , 'X') IN ('BRKD','UNPLBRKD','FILTRA', 'LUB', 'FAC') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;
But I want to change the code to include a record (ACT_TRADE) from another table(R5ACTIVITIES). I am getting this error message "ORA-01006: bind variable does not exist - POST-UPDATE 200Before Binding". Any help would be appreciated.
DECLARE
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
V_CODE varchar2(8);
V_EVENT varchar2(8);
V_TRADE varchar2(8);
BEGIN
SELECT R5EVENTS.EVT_STATUS, R5EVENTS.EVT_FAILURE, R5EVENTS.EVT_CAUSE, R5EVENTS.EVT_ACTION, R5EVENTS.EVT_CODE, R5ACTIVITIES.ACT_EVENT, R5ACTIVITIES.ACT_TRADE
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, V_CODE, V_EVENT, V_TRADE
FROM R5EVENTS, R5ACTIVITIES WHERE V_CODE = :V_EVENT;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_TRADE , 'X') IN ('MTM','MTL','MTMGT', 'FTM', 'FTL', 'FTMGT', 'R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;

Thank you for your responses. Your feedback was helpful. This is what I ended up doing for a solution:
DECLARE
v_JOBTYPE varchar2(8);
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
v_GROUP varchar2(30);
BEGIN
SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE, USR_GROUP
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE, v_GROUP
FROM R5EVENTS, R5USERS WHERE R5EVENTS.ROWID = :ROWID
AND USR_CODE = O7SESS.CUR_USER;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(V_GROUP,'X') IN ('MTM','MTL','MTMGT','FTL','FTMGTS','PLANNER','DISPATCH','PMCOOR','R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;

Error message Indesign:Either the file does not exist, you do not have read access to it, or use the file in another application.

I've got problem with opening a file in InDesign. The file type is an InDesign Markup Document. The error message is: Either the file does not exist, you do not have read access to it, or use the file in another application. What's wrong?

Error message: Entry 1 WC 99 does not exist in T508A (check entry)

Can anyone please tell me what does the error message Entry "1 WC 99" does not exist in T508A (check entry) means? I was trying to 'generate work schedule manually' when got this error. In the above error message, 1 means employee subgroup grouping.....WC is Holiday Calender......and 99 is personal subarea grouping.....
I went to the table using se16 but could not make out how I can input those entries in the table....
Edited by: Parveez Sazzad on Feb 26, 2011 4:56 PM

you have to check this table from SM30 Tcode and give V_T508A table here we have to configure DWSR and than we have to generate the WSR

Error: "Message short text 26 107 does not exist"

Hi DS Expert,
We've upgraded our DS from 3.2 into 4.2.
But sometimes several jobs fail with error: "Message short text 26 107 does not exist".
This error does not occur in DS 3.2.
Please help...
Thank you.

Hi,
Such a message seems to be SAP/BI related.
check wether you had shortdumps in your connected SAP system.
In DS there are no "long/medium/short-" texts stored.

Audit vault 10.3 - role 'DV_STREAMS_ADMIN' does not exist

hi,
in the audit-vault-admin guide 10.3, step 2.3.1 - 8:
If you plan to add the REDO collect to your source database, then grant the Oracle source database user account the DV_STREAMS_ADMIN role.
The DV_STREAMS_ADMIN role enables the management of Oracle Streams processes to be tightly controlled by Database Vault, but does not change or restrict the way an administrator would normally configure Oracle Streams.
For example:
SQL> GRANT DV_SECANALYST TO srcuser_ora;
I got this error when grant that role to srcuser:
SQL> grant DV_STREAMS_ADMIN to srcuser1;
grant DV_STREAMS_ADMIN to srcuser1
ERROR at line 1:
ORA-01919: role 'DV_STREAMS_ADMIN' does not exist
Please support !

Steps 6 and 7 mention DB Vault
You can raise an SR with Oracle for a documentation change.
If the source database has Oracle Database Vault installed, then log in as a user who has been granted the DV_OWNER (Database Vault Owner) role and add the source database user to the Oracle Data Dictionary realm.
For example:
SQL> CONNECT preston
Enter password: password
Connected.
SQL> EXEC DBMS_MACADM.ADD_AUTH_TO_REALM('Oracle Data Dictionary', 'SRCUSER_ORA', null, dbms_macutl.g_realm_auth_participant);
SQL> COMMIT;
If the source database has Oracle Database Vault installed, then grant the Oracle source database user account the DV_SECANALYST role.
The DV_SECANALYST role enables the user to run Oracle Database Vault reports and monitor Oracle Database Vault. This role also enables the Oracle source database user to collect Database Vault audit trail data from the source database.
For example:
SQL> GRANT DV_SECANALYST TO srcuser_ora;

IDoc message Document or line item does not exist for invoice reference

Hello,
We activated IDoc message type FIDCC2. When cancelling documents which were created before the activation date the cancellation documents aren't posted in the receiving system. Message 'Document or line item does not exist for invoice reference' appears. How can I process these items (the reference document can't exist in the receiving system so the only option is to remove it from the IDoc?)?
Regards, Jan

This is just a guide. Adapt it to your situation. I get this kind of error message where in the case, someone has marked for deletion a line item in the purchase order. In this regard, the IDoc errors out because the line item number being referenced is marked for deletion.
You can either delete the IDoc or have the deletion flag taken off the line item number in the PO or document number to enable you reprocess the IDoc number in question.
Elias

Role 'Administrator' does not exist!

Hi experts,
We're getting the following error during the installation of Solution Manager 7.0 EHP1. Error occurs in the phase of "Configure System Landscape Directory"
Do you have any idea about this issue ? Quick answers will be appreciated
Thanks in advance for your help.
ConfigMainExt state200
TYPE=A<BR>STATE=<BR>INFO_SHORT=java.lang.Exception: java.lang.Exception: Role 'Administrator' does not exist!
     at com.sap.ctc.util.UserConfig.addActionToRole(UserConfig.java:238)
     at com.sap.ctc.util.UserConfig.performFunction(UserConfig.java:65)
     at com.sap.ctc.util.ConfigServlet.doGet(ConfigServlet.java:74)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
//<BR>CONFIGURATION=

Hi Gokhan,
I assume that you're installing a JAVA system on Windows.
This error is related to language selection of OS. Kindly change the language as English from control panel -> region & language. ( all settings must be EN except keyboard ). Since system locale is not English, you get this error during the installation ( ABAP does not give an error like that )
You also need to restart the installation from scratch. ( before starting the new installation, re-login to the OS to activate new system locale settings )
I hope this helps.
Regards,
Alper Ozdemir
SAP R/3 NetWeaver Consultant

Error Message about drafts folder ("Mailbox does not exist")

Hi, after adding a third account to my Thunderbird desktop, I keep receiving the following Error Message every 30 seconds or so:
"the current operation on drafts did not succeed. the mail server for account [email protected] responded: Mailbox does not exist"
Can anyone help fixing this? Sending and receiving mail seems to work just fine.
Thanks so much,
Eli

Th'''anks for your answer!
I tried what you suggested, however I don't appear to have a "Drafts" folder at all where you said, will it be enough to create one and then subscribe and configure it?
EDIT: I now created a new folder named "Drafts" from the main interface, then did what Mr Rodríguez suggested, which appears to be working.
Thanks so much for your help!!

I cannot download word documents. Error message says assocated helper application does not exist.

Tried downloading word document from email. error message Associated helper application does not exist

To open a document you must have installed an Android application for it. The file is downloaded but can be opened with Firefox, but with the specific app from Android.
Try installing a documents app and for sure it will work.

During import ora-01917 user or role does not exist "High Priority"

Hi,
When i import the data the following error occured.
imp system/[email protected] fromuser=dmv_ace_ruh touser=dmv_ace_ruh file=F:\dmvaceruh.dmp log=F:\dmvaceruhimp.log ignore=y
fromuser=dmv_ace_ruh (exported by another database i.e database name is ACE)
OS = Sun solaris
touser=dmv_ace_ruh (database name is SAI)
OS = windows server 2003
Database Common 10g
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.02.01 via direct path
Warning: the objects were exported by DMV_ACE_RUH, not by you
import done in AR8MSWIN1256 character set and AL16UTF16 NCHAR character set
export client uses WE8MSWIN1252 character set (possible charset conversion)
. importing DMV_ACE_RUH's objects into DMV_ACE_RUH
. . importing table "DMV_COVER_RISK_SMI_DISC_LOAD" 0 rows imported
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT ALTER ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PREM_ACE_RUH' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT DELETE ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PREM_ACE_RUH' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT INDEX ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PREM_ACE_RUH' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT INSERT ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PREM_ACE_RUH' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT SELECT ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PREM_ACE_RUH' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT UPDATE ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PREM_ACE_RUH' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT REFERENCES ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PREM_ACE_RUH' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT ON COMMIT REFRESH ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'PREM_ACE_RUH' does not exist
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT QUERY REWRITE ON "DMV_COVER_RISK_SMI_DISC_LOAD" TO "PREM_ACE_RUH""
IMP-00003: ORACLE error 1917 encountered
Regards
S.Azar
DBA
Edited by: azarmohds on Oct 5, 2009 5:11 AM

oradba wrote:
What's not clear with this error message? The mentioned role ''PREM_ACE_RUH' does not exist in the target database. So granting privileges to this role cannot work.
Werner''PREM_ACE_RUH' this is one of the user of ACE database. but i exported DMV_ACE_RUH user data only...
but i cannot import the dmv_ace_ruh data to same user name of SAI database..
regards
S.azar

Exit Button in Travel Assistant - Area does not exist message

My client is on EHP2 for SAP NW 7.0 SP15 & EHP5 for SAP
ERP 6.0 SP12. I believe the portal is also in the process of being upgraded
from 7.01 to 7.4 (although the issue I am having occurs in both new and old
portal systems).
The Homepage Framework was originally customised for Travel
Management to use predominantly Z* Area Group Pages/Areas etc (rather than the
SAP-standard config) and is all working fine apart from one issue with the Exit
button in the Travel Assistant application (FITV_POWL_ASSISTANT).
Note that the FITV_POWL_ASSISTANT application is called with
parameter SAP_FITV_EXIT_OP=CallAreaPage. The presence of this parameter means
the Exit button is available within the application, and the area page should
be called when the button is pressed.
When pressing the Exit button however the message “Critical
Error: Area ZASSISTANT_TRAVEL_ERP2005 does not exist” is raised.
The Travel Assistant portal role contains the same iViews as
the Travel Employee portal role, but has an extra iView called “Self Services Assistant”
which appears as an additional subtab in the portal.
The parameters passed within this iView are:
“sap.xss.menuarea=ZASSISTANT_TRAVEL_ERP2005&sap.xss.menuargrp=ZSAPDEFAULTTRA_ERP2005&sap.xss.menuhdr=SAPDEFAULT&sap.xss.menunobuffer=true”.
Press Exit:
What I don’t understand is that the area page is appearing correctly
and the application is called without issue but when pressing Exit the
navigation can’t return to the area page.
Can anyone suggest what might be causing this error?

Thanks for the suggestions Siddharth.
We do have FIN_TRAVEL_1 active but the business function mentioned in note 1577326 is not.
In the end the issue was resolved by changing the Link Resource assigned to the ZASSISTANT_TRAVEL_ERP2005 Area Page to a resource with a different portal PCD URL, so that now the correct page is called when Exit is pressed.
I think the way this Area Page was implemented was not ideal as all other Area Pages in our setup are called from a separate Area Group Page/tab, whereas this one was not.

Message R1206 BP Role FS0000 does not exist

Similar Messages

Maybe you are looking for