Message not going to the receiver ABAP Proxy

I have a File-XI-ERP scenario.  The file communication channel is working fine but the sending to the ABAP proxy for transfer to ERP is not working.  I have created the right ID objects for the scenario.  Using the communication channel monitoring, the file gets to be read, transformed into the right message but sent to the wrong integration server (http://xidev:50000/sap/XI/engine?type=entry) instead of what is given in the communication channel.  Any suggestions on what to look at?

Hai,
    Check whether the ABAP Proxies are enabled in your ERP System or not. To do this Login to your ERP System --> Goto tcode: SPROXY
select option --> Goto --> Connection Test. this will check the connection b/n your ABAP proxy and the Integration Builder. the following parameters should be checked,
1.The address of the Integration Builder must be stored in the SAP system
=>Check/maintain with report SPROX_CHECK_IFR_ADDRESS
2.The HTTP connection of the ERP application server must function correctly
=>Check with report SPROX_CHECK_HTTP_COMMUNICATION
3.The Integration Builder server must be running correctly
=>Check with report SPROX_CHECK_IFR_RESPONSE
4. Proxy generation must interpret the data of the Integration Builder correctly
==>Check with report SPROX_CHECK_IFR_CONNECTION
Hope this helps..
regards,
Gopinathan.

Similar Messages

  • Proxy structures not getting populated in receiver ABAP proxy

    hello
    i am having HTTP-ABAP Proxy scenario where i am entering sales order information from HTTP and sending it to SAP CRM system. I am using ABAP receiver Proxy for getting the message.
    But when i debugged the code of receiver proxy i couldn't found the structures being filled by the data. i checked in SXMB_MONI of CRM which was containing data into its payload but no data into the structures. actually i have generated proxy of the interface which uses external definitions as data type.
    has anyone faced such problem before?
    thanks in advance.
    Regards
    Rajeev

    Hi Rajeev,
    There should not be any problem due to XSD u have used.Ur proxy is created sucessfully i guess?? There may be some discrepancy in ur code..
    check the server proxy....may be helpful for u..
    Server Proxy (Receiver Proxy)-
    /people/siva.maranani/blog/2005/04/03/abap-server-proxies
    File to ABAP Proxy
    /people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
    check the threads also...
    problem in proxy?
    Re: coding of Server proxy
    Re: coding of Server proxy
    regards
    BILL

  • I re-send a mail with 3 pdf attachmets to an outlook account and the attachments do not arrive to the receiver, if the receiver is a Windows PC. If the receiver is an iPhone the attachments can be accessed til the moment Unload the full message is pushed

    I re-send a mail with 3 pdf attachmets to an outlook account and the attachments do not arrive to the receiver, if the receiver is a Windows PC. If the receiver is an iPhone the attachments can be accessed til the moment Unload the full message is pushed

    It is NOT legitimate. It is SPAM
    The latest Firefox release is 7.0.1 which you should update to by visiting http://www.mozilla.org/en-US/firefox/new/

  • When deleting a user created folder from On My Mac in Mac Mail the sent messages that are part of conversations that reside there are not deleted, only the received mail gets deleted.

    When deleting a user created folder from On My Mac in Mac Mail the sent messages that are part of conversations that reside there are not deleted, only the received mail gets deleted. Any way for both the received and sent mail that resides there to be deleted?
    I create a lot of project folders where i keep all my conversations regarding the project. Once the project is finished i would like to just delete the folder and get rid of all the emails associated with it but when i delete the folder i've noticed that only received messages are deleted. Now I am stuck trying to sort through my sent folder for messages that were returned there after the conversations was supposedly deleted.

    Mail/Preferences/Viewing - un-check include related messages, delete the folder, then go back and reset yo include.

  • Message "not available in the us store"

    Why do I keep getting the message "not available in the us store" when I press the update button in the app store past purchases for  os x server 2.2.2?

    All I am trying to do is access the store, I have not even tried to view anything and I cannot change my view and cannot get into the store?! I am able to view iTunes University material, but as for music, movies, TV shows, app store, books, podcasts or ping, all same message. If I try to sign in, I am receiving an unknown error message...

  • Torch 9800 missed messages/messages not going through, dropped calls

    What is the deal, messages that I send are not going to the recipient, calls are dropped, used my geek squad insurance and have replaced the phone 3 times and got a new sim card too. must be something i am doing or not doing to cause this. Any suggestions?????

    Hello Plude
    Start with the article below to troubleshoot issues with the cellular connection. It will walk you through checking for carrier updates and also restoring your iPhone as well.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Regards,
    -Norm G.

  • When using facetime, my picture is not seen on the receiving end. How do i fix?

    When using FaceTime, my picture is not seen on the receiving end.  Help!

    Part of training the junk filter is also to mark good messages 'As Not Junk'.
    http://kb.mozillazine.org/Junk_Mail_Controls#Training_the_Junk_Mail_Controls

  • My sms are not memorized from the receiver

    hi,
    i have a Nokia 1200. From few a have this problem:
    the sms the sms that i send are not memorized from the receiver . It is only possible read it when arrive and cancel it.I've tried to move the sim card to another phone and i have not problem.
    Anyone have had the same problem?
    hi
    Alfredo

    Puh! I think you need to rephrase that since it is impossible to understand what you could have meant...probably that´s why nobody has replied yet...
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • My ibook g4 took a install from apple update . Why is it not going past the screen where is shows Mac OS X

    My ibook g4 took a install from apple update . Why is it not going past the screen where is shows Mac OS X

    Did you verify the hard drive before installing the update? You could have had hard drive corruption where the computer did not know where all the files are and something didn't get installed correctly.
    Did you repair permissions?  The installer may not have been able to overwrite a file if the permissions on files were not set correctly.
    Frankly, the easiest thing will be to re-install the operating system from the installer disc.  While booted to the disc make sure you run Disk Utility First Aid to repair the drive and permissions, then install.  Many of us prefer to download updates from Apple rather than rely upon Software update. we use SU to tell us what we need but we download them separately.
    For which operating system was this update?  Apple hasn't brought out a new system update for G4s in quite a while.

  • I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

    I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

    When clips won't play without rendering in the Timeline, it usually means that the clip's specs don't match the Sequence settings.
    A .mov file could be made from any number of codecs; the QuickTime Movie designation is merely a container for video files of all kinds.  Since FCE only works with the QuickTime DV codec and the Apple Intermediate Codec (AIC) natively, if your mov files aren't one of those two, you need to convert them PRIOR to importing into your FCE project.
    -DH

  • My pic cd is not going inside the mac

    my pic cd is not going inside the ma

    also, when i click on one of the other tabs, the about tab stays highlighted. not sure why this is happening to this one tab and not the other
    s.

  • User decision activity not going to the agents(Position Maintained).

    Hi All,
    I assigned a specific Position in the agent field of  the user decision activity. But after assigning, the decisiion step is not going to the expected agent but it getting executed by the WF-BATCH user.
    I have checked the same in the Tcode : PO13 and the corresponding user is the only one maintained for that position.
    Kindly guide what can be the possible reasons. Is there any thing i am missing.
    Thanks,
    Neslin.

    Thanks.Yes.Latest start and latest end are already maintained and there is a Rule when the latest start missed also.  kindly let me know how i can avoid this also..
    How to check whether the position is maintained to the SAP user id?.I have seen the user maintained under the position in Tcode PO13..
    The deadline is calculated 4 days after sydatum.
    One more thing the Workitem got reserved by the WF-batch and executed by WF-batch.
    Edited by: neslin on Jul 28, 2009 7:49 AM

  • TS3899 In the past I have been able to retreive all messages not deleted in the inbox of my mailbox.  This week I have not been able to acces messages received prior to 9/10/13.  what can I do to retrieve messages eceived prior to 9/10/13.

    Until recently I have been able to retrieve all messages not deleted i m mailbox "inbox".  Today I can only retrieve messages from 9/10/13 to present.  How can i retreive all previously sent messages that were not deleted?

    Settings > Mail, Contacts, Calendars > Tap the account in question > Mail days to sync - increase the time to sync.

  • Response message error in queue when using ABAP proxy

    I am using an abap proxy for the first time, and some of the response messages are getting stuck in the sender's (R/3) inbound queue.  To resolve them, I have to either reset the status or execute the LUW.  Sometimes, this doesn't even work. 
    Here is my "asynchronous" scenario:
    R/3 -> <proxy> -> PI -> <file adapter> -> File
    The R/3 system that I'm using has not used PI before, so I'm thinking something is missing from the set-up on the R/3 side.  On the errors I finally do get to process, I get the following error in the SXMB_MONI on the sender (R/3) side (the PI SXMB_MONI shows successful).  Can someone help me understand what a response message is and how it is different from an acknowledgement?  Also, help me to understand what could be causing the response messages to get stuck in the R/3 queue.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Integration Server -->
       - <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
        <SAP:Context />
        <SAP:Code p1="MessageId"
                          p2="4962B2EDB60A003BE1008000A2844D1A"
                          p3="00000000000000000000000000000000"     
                          p4="">PROTOCOL.WRONG_HEADER_IN_RESPONSE</SAP:Code>
        <SAP:Text language="EN">Response message header contains the value 00000000000000000000000000000000 in element MessageId instead of the expected value 4962B2EDB60A003BE1008000A2844D1A</SAP:Text>
      </SAP:ErrorHeader>

    Ultimate testing tool for services is soapUI (Freeware)
    http://www.soapui.org/
    If you can invoke your service from soapUI and you receive a response, then PeopleSoft is working fine and the request handling in the calling system is incorrect.
    Try downloading soapUI and try invoking your service (not that a fan of SendMaster).
    Hakan

  • Lost message from XI 3.0 to ABAP proxy

    Hi,
    we are currently trying to send a message from SAP Rel. 4.5B by RFC to XI 3.0 and then posting it by ABAP proxy technology to an SAP System 4.7 based on WebAS 6.20
    Everything seems to be fine while the message is marked "successfully processed" in the XI but we cannot find the message in the destination system. It seems that the message gets lost in the XI.
    We've already checked our parameters and everything seems to be well maintained.
    <b>Does anybody has had a similar problem? Could this be a communication problem between XI 3.0 and 2.0?</b>
    Thanks for any comment.
    Christina

    Hi Colin,
    just to be sure that we are talking about the same.
    In the Integration Engine we defined in SM59 one entry of type "R/3 connection" with the parameters
    - target host: /H/SAP01L0C.cdc.xxxx.com
    - system number: 40
    - gateway host and gateway service
    In the Integration Builder (Configuration Runtime) we defined one communication channel for the destination system with the parameters:
    - Transport Protocol: HTTP 1.0
    - Message Protocol: XI 2.0
    - Adapter Engine: Integration Server
    - Adressing Type: URL Address
    - Target Host: SAP01L0C.cdc.xxxx.com
    - Service Number: 8440
    - Path: /sap/xi/engine?type=receiver
    and the part with the authentication data including logon language and client.
    Do we have to make an additional entry in SM59 in the Integration Engine of type "HTTP Connections to R/3 System"?
    Regards,
    Christina

Maybe you are looking for

  • Run shell commands using java program

    Hi guys, I am trying to run shell commands like cd /something and ./command with arguments as follows, but getting an exception that ./command not found.Instead of changing directory using "cd" command I am passing directory as an argument in rt,exec

  • How do i use a Aux channel with reverb from two different patches

    I have a Concert with an Aux channel strip for Reverb and i want two seperate patches to both use Send 1 with different amounts/level of reverb but when i move the fader on the patch and then go to the other patch the fader has moved back to the down

  • Receiving mail, but can't send mail with attachments?

    Hello, I can't send mails anymore, I have been able to send some without any attachments (i.e. reply doesn't work as it automatically attaches the original text). This started 3 days ago. Also, my mail doesn't seem to recognize powerpoint and word do

  • Apply different styles to text within a Text field?

    I am working on an application that consumes a user-generated HTML file and displays it on part of a Flex screen. The main problem is HTML can look something like this (for example): Hello <span class="greeting">Mr. Smith</span>, how are you doing <s

  • Photoshop CS6 clear anchor point

    Hi Small problem with paths :/ Clearing anchor point so that it's cuts the path line also to the next anchor (like point to point, cuts segment of path) not the whole path... Sometimes it works using delete or backspace But no clue why does not alway