"Message number: FI311: Any commitment item has been entried in the positio

Hello,
when I try to post a customer invoice with fb70 tx , and I have created a derivation rule : cost center-->fund center, and also the G/L account that I am using in the posting has a commmitment item assigned , but the system shows the next error:
"Message number: FI311: Any commitment item has been entried in the position 00001 1000(Cocd)
6001000200(G/L account).
But in the tx Fb01, the system  run correctly and make the derivation
Which is the problem , some note to implement ?
Best Regards
Olga

Hi,
When you post a document, all lines have to receive FM assignment. I believe, you are receiving this message on the line of the customer. Go to FMDERIVE, activate a trace and you will see if you have rules missing to derive FM object.
Regards,
Eli

Similar Messages

  • How do I know what item has been selected in a select list?

    I built a select list where the user selects one item from the list and then searches using the searchfield. I need to know what item has been selected in the select list so that I can do branching and branch the user to a particular page. Can someone tell me how I can accomplish this?
    So if I want to search for Tea in the drinks category I would need to click on Drink in the select list and then type "Tea" and select search. After that I get redirected to a table called "Drinks" and there the search results will be displayed. please help!

    I tried to mach expressions... I made a simple list(with redirection):
    STATIC:Yes;Y,No;N and it displays fine. I then try to do branching where exp1=exp2 Where I tried to have the label "X" for E1 and "Y" for E2 and nothing happened. I tried to use the name of the list Xlist and it failed too. I tried Request=exp1 and didnt work either. I set the source for the list as static. I am not sure what I am doing wrong. When i tried !=exp nothing happened either... perhaps the values I am using are wrong? Pleas help me out.

  • Cycle counting - How many times an item has been counted?

    Hallo Gurus,
    do you know if there's a way to know how many times an item has been counted during the year?
    Thank you very much indeed.
                Mick

    Hi Mick,
    Check the below links. Hope they will help you.
    http://help.sap.com/saphelp_snc70/helpdata/EN/4c/c1b4b55b912a4ae10000000a42189b/content.htm
    http://help.sap.com/saphelp_46c/helpdata/en/4d/2b8e3d43ad11d189410000e829fbbd/content.htm
    Regards,
    Shilpa

  • I got the message "Your handheld has been registered with the wireless network" from blackberry?

    So I got my curve 9360 about 3 months ago and last night I got a message from blackberry saying "Your handheld has been registered with the wireless network". I don't have a data plan but after I got this message I was able to go on the internet without wifi.. I thought it was extremely weird and I was scared my carrier, Rogers, will charge me so I turned my data off. I asked my dad today and he said I could use it and we won't pay if they charge me.. I'm still really worried that I'll get a ridicous bill at the end of the month. So why did I randomly get data and will it charge me? What should I do? 

    I've heard through the Rogers support forums that Rogers is offering a free data trial to its users.  I haven't seen anything official yet, but I've heard that on atleast two occasions so far.
    For that reason, I would go ahead and enjoy your free data while it lasts.  If you're really worried about it, call Rogers to confirm it.  Just remember, you never signed a data plan agreement with them so they can't charge you for it.
    I hope that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Maximum Number of Items has been reached in FI

    Hi All
    We are working on MySAP ERP 2005.
    We received the following error massage:
    [Maximum number of items has been reached] we then updated table TTPYV using MATNR,MEINS,MENGE,PAOBJNR,POSN2,VBEL2,WERKS,ZEKKN 
    We had these same settings in R/3 4.7 and it worked very well.
    1. What are MySAP ERP 2005 requirements in order to get SD billing items summarized in FI? our client wants one invoice with more than 10000 items
    2. What are other IMG settings required in both FI/SD modules to get this working?
    3. Are there any User Exits required?
    4. Are there any CO settings required?
    5. Are there any G/L account settings required?
    Please assist
    Regards,
    Mutali

    I don't think you can. We had the same problem and had a good look at sap notes and posts from SDN etc. and came to the conclusion that you can only invoice up to 9999 items. Not entirely sure about that number, might be 999 items. In any case we decided to break down the billing list by creating more than one billing documents.
    You can do the same and then create an Invoice list, which is a document that will contain the values of all individual billing documents without posting any values to FI/CO

  • Just purchased an upgrade from CS5.5 to CS6 : "valid serial number but no eligible product has been detected"... Any ideas?

    Hi,
    just purchased finally the upgrade for CS6 from CS5.5 Design Premium. I have a BIG problem. When I run the installation file, I put the serial for the upgrade => OK, then I have this message : "valid serial number but no eligible product has been detected", and asks me to put a serial of my actual version. I choose "Design Premium CS 5.5" with the good serial number and then I have this message : "the serial number did not match with a eligible product. Please enter an other serial"... Any ideas???
    Thank you and sorry for my bad english.

    Yes, I was sure about this, but their offices are closed now, so I tryed to see if somebody have an idea Thank you for your reply.

  • I am getting a message. What does it means "We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. "

    I have tried getting service support information from Apple Support Service. When entered my serial no. got this
    I am getting a message."We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. "
    What does it means???

    ashishtgb wrote:
    I dont have any idea . I brought out it new from the market.!
    Well, when you purchase from a non-official source you run the risk of getting who knows what from wherever. It appears this phone was replaced under warranty at some point, but not returned to Apple for refurbishment. Thus, the SN is no longer valid for warranty & service. If you can return it and get your money back, I'd suggest you do so.

  • Every time I open Iphoto I get the following message:  "A photo has been found in the iPhoto library that was not imported.  Do you want to import it?  Yes or No"  Any suggestions?

    Every time I open Iphoto I get the following message:  "A photo has been found in the Iphoto library that was not imported.  Does anyone have any suggestions?

    Quit iPhoto and to to the iPhoto library (by default in your pictures folder) - right click (control click) on it and select show package contents - find the folder named import (on importing) and drag it to the desktop - DO NOT MAKE ANY OTHER CHANGES - launch iPhoto and you will be fine.
    Open the import(ing) folder and if there is nothing in it that you need move it to the trash and empty the trash
    LN

  • When I send a text message I do not get any confirmathat it has been delivered.  Is there a way of getting an automated confiramtion of deleivery as I'm used to having this on a previous phone, and need to know that my texts have been delivered.

    When I send a text message I do not get any confirmation that it has been delivered.  Is there any way of getting an automated message confirmation delivery and time?  I was used to this with my old phone and need to know that my text message has been delivered to the recipient's phone, and when.

    Thanks.  So there's no means of knowing whether a text message has been delivered, not to mention time of delivery.  Perhaps I've gone for the wrong phone.  It might do a lot but seems to miss out on some basics.

  • Any existing function to validate an item when other item has been changed?

    Any existing function to validate an item when another item has been changed? Because these 2 fields are related. When one filed is changed, the other one should be blank and let the user to input again. I am using oracle custom.pll library.
    Any ideas?
    Amy

    Hi Vikram,
    Thanks for posting your issue,
    You can switch of alerts and set E-Mail Notification to Yes under your Workflow Tasks list > Settings > Advanced Settings. By doing so user specified in AssignedTo will receive e-mail notification when task is created and if task ownership is not changed
    during your workflow this will be the only mail sent by system.
    Since you are already using SharePoint designer you also have option to include Send an Email action in your workflow (after task is created). This option is better if you want to send some specific info to user.
    Also, browse the below mentioned URLs to create workflow step by step
    http://sharepointsolutions.com/sharepoint-help/blog/2010/03/create-a-detailed-custom-task-notification-with-a-sharepoint-designer-workflow/
    http://sharepoint-community.net/forum/topics/configure-email-notification-for-discussion-board-activity
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • When entering my phone serial number it shows "We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us."

    Hi,
    I had purchased an iPhone 5 last month and got the OS updated to iOS 7, yesterday.
    The data cable was of very bad quality and when I took it to the retailer for replacement, they said that its not covered under the one year warranty.
    Secondly, I have also been experiencing network coverage issues with this phone. So, I decided to contact apple care through the web. When entering my serial number/IMEI it says, "We're sorry, but this is a serial number for a product that has been replaced. Please check your information and re-enter your serial number. If your information is correct, you may need to contact us."
    Does anybody have any idea what the reason behind this could be.
    - First time with iPhone and frustrated.
    Briju

    If you purchased the iPhone from Apple or an authorized Apple reseller,
    contact them for assistance. If you purchased elsewhere, go back
    to that retailer and get them to give you a new iPhone or your money
    back.
    If you have checked the serial number carefully and re-entered it
    and that gave you the same error message, contact Apple if purchased
    from Apple or authorized retailer; otherwise you have been scammed
    and need to pursue the matter with the business you obtained the
    iPhone from.

  • Apologies, this item has been interrupted due to an error...

    Hi there. Recently i have changed motherboards/processors in my desktop PC (but kept the same hard drive). Since then, when i go to view Sky Go on my desktop, i get the following error message: “Apologies, this item has been interrupted due to an error. Please click play to resume watching. [t:6013 / c:4110 ].” I have worked through the steps on the support page and none of these have remedied the problem. I decided to leave it to the new month as I thought maybe it a was a maximum device limit issue, but I have removed what was my old PC and have tried to view a channel on this device, yet the same error message occurred. I have cleared all browser cookies, have reinstalled Silverlight and have set permissions for chrome or adblocker, not to block SkyGo. I have also tried viewing on Internet Explorer and Firefox and have the same issue.  Can anyone else lend any ideas on how to sort this?  Thanks 

    Login to Sky Go and click 'Watch live TV' from the home page. It will attempt to show Sky News and fail with the error [t6013-c1501].
    2. Right click on the error and you should see the Menu option 'Silverlight'. Select this and a dialog should appear. Click the 'Application Storage' tab and delete any entry that relates to sky go. Click OK to close the dialog.
    3. Close the browser (if you don't the next bit will fail as it will be using the file you need to rename).
    4. Open explorer and navigate to the folder C:\ProgramData\Microsoft\PlayReady
    Note: This folder might be hidden on your PC, if so in explorer select Organize->Folder and Search Options->View->Show hidden files and folders and click OK.
    5. Rename the file mspr.hds to mspr.hds.OLD
    Note: Don't rename/delete the folder C:\ProgramData\Microsoft\PlayReady or you will get the error [t6000-c1501]. The folder must exist in order for the new file to be created by Silverlight.
    6. Log back into Sky Go and click 'Watch live TV', this time you should see a message saying something like downloading security components.

  • TS4036 Help plz this massage comes up when i restore from iCloud.  You have reached your device limit also says Ur apple id has been restored to the maximum number of the time last 90 days.

    Help plz this massage comes up when i restore from iCloud.  You have reached your device limit also says Ur apple id has been restored to the maximum number of the time last 90 days.

    Have you shared your AppleID with anyone - family member or spouse?  Any given AppleID can only be associated with 10 devices at a time (five of which can be computers).  Once you reach that limit, the 90 day timeout applies before that AppleID can be associated with another, new, device.
    You can see the explanation here - http://support.apple.com/kb/HT4627
    All you can do is wait the 90 days, sorry but I know of no way around that.  If you think the message indicates an error though, then use the Express Lane web support pages to send a note to the AppleID support folks.

  • Error message: ni: A frame has been dropped and the acqusition has been canceled

    I use a NI PCIe 1433 framegrabber with a Basler spl4096-140km line camera.
    Using triggered acqusition with an external source, I can get a framerate of 68500Hz in NI-MAX.
    When I use the Matlab image acquisiton toolbox to acquire data, I however very often get the error message: 'ni: A frame has been dropped and the acqusition has been canceled". This happens even at much lower framerates (20kHz) and only seems to go away when acquiring data slowly.
    Computer is a Dell Precision 7600 and I assume there should be no issues with RAM or the PC being slow. The error does not go away when reducing the data size (i.e. reducing the ROI to one single point that is readout).
    Do you have any pointers why this error message appears and what can be done about it?
    Thank you!
    Reto

    Hello,
    I encountered the same problem and I think it is because the allowcation of storage in matlab cannot catch up with that of the camera so that it will drop frames when the buffer is full.
    I also want to know how to solve that.
    Yang

  • Can I tell at server-level if a message has been displayed in the Reading Pane in Outlook?

    Hello,
    Does anyone know if there are any traces at server-level (Exchange 2010) if a message has been displayed in the Reading Pane of Outlook 2010? The message would still be marked as Read in the recipient's mailbox.
    Thanks,
    - Alan.

    Hi,
    If you want to know whether an email has been read by recipient, you can either request a read receipt or enable the tracking for read status for messages by using the
    Set-OrganizationConfig –ReadTrackingEnabled:$True command.
    A related blog for your reference.
    Question: Is it possible to check if a message has been read, even when the sender forgot to check the box “Request a Read receipt for this message”?
    http://blogs.technet.com/b/ilvancri/archive/2010/04/13/question-is-it-possible-to-check-if-a-message-has-been-read-even-when-the-sender-forgot-to-check-the-box-request-a-read-receipt-for-this-message.aspx
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

Maybe you are looking for