Message Persist in Proxy runtime

Hi,
I want to look at a proxy message which was sent 10 days ago.
But in proxy runtime it does not show messages beyond 3 days.
Please help!

>
XIPHER wrote:
> Hi,
>
> I want to look at a proxy message which was sent 10 days ago.
> But in proxy runtime it does not show messages beyond 3 days.
> Please help!
Is that you can't see any messae which were sent 10 days agao.
Check with your BASIS team if they have not archieved the messages.
Regards,
Sarvesh

Similar Messages

  • Java Proxy Runtime:  failure to locate proxy bean on inbound call

    Hello gurus of the SDN,
    I have been trying to get an inbound Java Proxy scenario to work in XI 3.0 but have not been able to get the JPR to recognize my generated and deployed java code.  My scenario is set up to call the java proxies generated from a message interface based on the MATMAS Idoc.  I successfully deployed the generated java proxies on the same host box as is running the XI instance.  The objects are named as follows
    Message interface on XI = Inbound_MATMAS04
    Generated proxy bean = Inbound_MATMAS04_PortTypeBean
    Implementing class = InboundMATMAS04_PortTypeImpl
    Implementing method = inboundMATMAS04
    I used the JPR transport servlet to register the interface and implementing class but am not sure if I did this correctly.  I used the following entry in my web browser:
    http://nadcp786:50000/ProxyServer/register?
    ns=urn:xiTrainingLabs:groupXX:SAP&
    interface=InboundMATMAS04&
    bean=InboundMATMAS04_PortTypeImpl&
    method=inboundMATMAS04
    I also tried using the localejb/ prefix for the bean name in the above step since the code is co-located.  When I trigger the scenario, the Idoc info is passed into XI and the Java Proxy Runtime is called, but I get the following error response back in the SOAP header:
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="PARSING">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Cannot locate proxy bean InboundMATMAS04_PortTypeImpl: com.sap.aii.proxy.xiruntime.core.XmlInboundException: Cannot locate proxy bean InboundMATMAS04_PortTypeImpl</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Finally, appended at the end of this post is the audit log of the messaging system showing that the JPR is called but without being able to locate the bean.  I think I am missing a configuration step somewhere, but can’t figure out what it is!!  Can anyone help me? 
    Many thanks in advance.
    Regards,
    Nick Simon
    Time Stamp     Status     Description
    2004-10-25 19:47:32     Success     The message was successfully received by the messaging system. Profile: XI URL: http://nadcp786.bcsdc.lexington.ibm.com:50000/MessagingSystem/receive/JPR/XI
    2004-10-25 19:47:32     Success     Using connection JPR. Trying to put the message into the receive queue.
    2004-10-25 19:47:32     Success     The message was successfully retrieved from the receive queue.
    2004-10-25 19:47:32     Success     The message status set to DLNG.
    2004-10-25 19:47:32     Success     Java proxy runtime (JPR) accepted the message
    2004-10-25 19:47:34     Error     JPR could not process the message. Reason: Cannot locate proxy bean localejbs/InboundMATMAS04_PortTypeImpl
    2004-10-25 19:47:34     Error     Delivery of the message to the application using connection JPR failed, due to: Cannot locate proxy bean localejbs/InboundMATMAS04_PortTypeImpl.
    2004-10-25 19:47:34     Error     The message status set to FAIL.
    2004-10-25 19:47:34     Error     Asynchronous error detected: Cannot locate proxy bean localejbs/InboundMATMAS04_PortTypeImpl. Trying to report it.
    2004-10-25 19:47:34     Error     Asynchronous error reported.
    Message was edited by: Nicholas Simon

    Hi
    How do you determine the JNDI naming of the a EJB?
    I have following entry in JNDI directory in the root
    Object Name FlightQueryIn
    Class Name javax.naming.Reference
    Context Name 
    Object Value Reference Class Name:
    Type: clientAppName
    Content: sap.com/JavaProxyEAR
    Type: interfaceType
    Content: remote
    Type: home
    Content: com.sap.aii.proxy.xiruntime.core.AbstractProxyInboundHome4
    Type: ejb-link
    Content: FlightSeatAvailabilityQueryIn_PortTypeBean
    Type: jndi-name
    Content: FlightQueryIn
    Type: remote
    Content: com.sap.aii.proxy.xiruntime.core.AbstractProxyInboundRemote4
    I tried to register the bean with JPR using:
    http://ctsapxid01:50100/ProxyServer/register?ns=http://sap.com/xi/XI/Demo/Airline&interface=FlightSeatAvailabilityQuery_In&bean=FlightQueryIn&method=flightSeatAvailabilityQueryIn
    I followed the following blog
    http://wiki.sdn.sap.com/wiki/display/Java/JavaProxyChangesinPI7.1fromPI7.0
    Thanks,
    Chris

  • Runtime Workbench Proxy Runtime Configuration

    Hi
    I'm trying to setup the RWB proxy runtime configuration. However our ERP system shows up as an ALE-Logical system and not a Business System in the Configuration tab of the RWB and doesnt appear at all in the Component Monitoring tab so we cant monitor messages from it through the RWB.
    We've tried deleting the business and technical system and re-registering them with RZ70 as well doing a CPA Cache refresh. But that hasnt resolved the issue.
    I have compared this system to another system in the SLD which does show up as a Business System and can be monitored through Component Monitoring. They seem to be exactly the same.
    Is there some kind of setting we are missing on the ERP system?
    Thanks
    Riaz

    Hi Riaz & kesava,
    RWB Proxy runtime setup can be seen from RWB->Component Monitoring under Components section Domain XI->Integration Engine.
    Check the following
    1)Can the SLD be reached?  - RFC destination, ping, getLCR server, read cache, BS defined
    2) Does the Integration Engine know the business system?   - Business system name = BS_100, Role = Application System
    3)Are roles in SXMS_CONF_ITEMS and SLD consistent?   - Role = Application System
    4)Has an Integration Server destination been defined?   Destination 'XIabcd100' to the Integration Server 
    Cheers
    Veera

  • Proxy Runtime Error in RWB.

    Hi All,
    I am getting following error,
    Please, help me to solve this problem
    Message: Neither the messager server nor the application server can be reached for system DSM
    Stacktrace:
    com.sap.aii.rwb.exceptions.OperationFailedException: Neither the messager server nor the application server can be reached for system DSM
    at com.sap.aii.rwb.core.R3System.getJCOPool(R3System.java:863)
    at com.sap.aii.rwb.core.R3System.getJCOPool(R3System.java:726)
    at com.sap.aii.rwb.core.R3System.getJCOPool(R3System.java:698)
    at com.sap.aii.rwb.core.R3System.getRepository(R3System.java:910)
    at com.sap.aii.rwb.core.BusinessSystem.getRepository(BusinessSystem.java:802)
    at com.sap.aii.rwb.core.XIAbapRTCComponent.getConnector(XIAbapRTCComponent.java:97)
    at com.sap.aii.rwb.core.XIRTCComponent.ping(XIRTCComponent.java:209)
    at com.sap.aii.rwb.web.componentmonitoring.model.CompTestModel.doPing(CompTestModel.java:580)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doPing(CmDynPage.java:307)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.updateTests(CmDynPage.java:381)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.selectNode(CmDynPage.java:397)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.process_treeClick(CmDynPage.java:348)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
    at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:115)
    at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
    at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
    at jsp_FC_Secure1221049856634._jspService(jsp_FC_Secure1221049856634.java:24)
    at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
    at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
    at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Thanks In Advance
    Mahesh

    Hi Seshagiri,
    Actually, i am getting this error in message Monitoring dropdown, i have Proxy Runtime Receiver System option. when i am selecting the same i am getting the following error.
      javax.ejb.CreateException: Neither the messager server nor the application server can be reached for system DSM
    javax.ejb.CreateException: Neither the messager server nor the application server can be reached for system DSM
         at com.sap.aii.mdt.server.integrationengine.IntegrationEngineMonitoringBean.ejbCreate(IntegrationEngineMonitoringBean.java:456)
         at com.sap.aii.mdt.api.server.IntegrationEngineHomeImpl1_0.create(IntegrationEngineHomeImpl1_0.java:195)
         at com.sap.aii.mdt.api.server.IntegrationEngineHome_Stub.create(IntegrationEngineHome_Stub.java:57)
         at com.sap.aii.mdt.util.MonitoringBeanCache.getMonitoringBean(MonitoringBeanCache.java:305)
         at com.sap.aii.mdt.util.WebUtil.getMonitor(WebUtil.java:351)
         at jsp_monitor_new1221049881372._jspService(jsp_monitor_new1221049881372.java:140)
         at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
         at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:427)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:358)
         at com.sap.aii.rwb.web.messagemonitoring.viewcontroller.MmDynPage.doProcessBeforeOutput(MmDynPage.java:69)
         at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:123)
         at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
         at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at jsp_FC_Secure1221049856634._jspService(jsp_FC_Secure1221049856634.java:24)
         at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
         at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

  • Give me description about JAVA Proxy Runtime and JAVA Proxy Server

    Give me description about JAVA Proxy Runtime and JAVA Proxy Server with some examples.

    Hi,
    Java proxy runtime :
    Using the Java proxy runtime you can receive messages or send messages to the Integration Server.
    This will help you
    http://help.sap.com/saphelp_nw04/helpdata/en/64/7e5e3c754e476ee10000000a11405a/frameset.htm
    Java proxy server :
    The connection to the Integration Server by using the Java proxy runtime.
    This will help you
    http://help.sap.com/saphelp_nw04/helpdata/en/87/5305adc23540b8ac7bce08dbe96bd5/frameset.htm
    Regards
    Agasthuri Doss

  • Error in Runtime Workbench, Component Monitoring, Proxy Runtime

    Hi,
    I have the following error in the Runtime Workbench, under Component Monitoring->Integration Engines->Proxy Runtime. The error message is Ping Status: “Unable to logon to system xxx in language EN with user XIRWBUSER”. However, I am unable to find out where the account and password are specified in order to correct this. Any help would be appreciated.

    Hi,
    it can be for some system configured on http destination or the sld system configured for this server.
    take a look at tx sxmb_adm for the http destination to discover witch destination is been used. then, on sm59, find the server that is been called for this http destination and check on that server if this user is ok there.
    to check sld, go to tx sld_apicust discover witch is the sld system configured for this server. After log on to sld system and check the user.
    Maybe the user is ok on the destination system, so, check the password on sm59 (if the problem is with an http dest) or sld_apicust (if the problem is the connection to sld).
    regards.
    roberti

  • Integration Engine Proxy Runtime Error

    Hello,
    I have  ECC and PI server for my landsacpe. When i ran SXMB_IFR tcode in my ECC server i got the follwing error under Runtime work Bench
    Proxy Runtime - it is shows red color.
    Unable to log on to system ECC120   in language en with user PIRWBUSER  
    Details for Ping Status
    Message: Unable to log on to system ECD210 in language en with user PIRWBUSER
    Stacktrace:
    com.sap.aii.rwb.exceptions.OperationFailedException: Unable to log on to system ECD210 in language en with user PIRWBUSER
    at com.sap.aii.rwb.core.XIAbapRTCComponent.getConnector(XIAbapRTCComponent.java:114)
    at com.sap.aii.rwb.core.XIRTCComponent.ping(XIRTCComponent.java:209)
    at com.sap.aii.rwb.web.componentmonitoring.model.CompTestModel.doPing(CompTestModel.java:581)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doPing(CmDynPage.java:425)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.updateTests(CmDynPage.java:525)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.selectNode(CmDynPage.java:552)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.process_treeClick(CmDynPage.java:481)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
    at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:115)
    at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
    at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
    at jsp_FC_Secure1229621978943._jspService(jsp_FC_Secure1229621978943.java:15)
    at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
    at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
    at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    When i checked  my PIRWBUSER password in abap and poratal level there is no conflicts. Password is correct.
    For integration i have created three RFC also
    LCRSAPRFC,SLDAPIRFC,SAPJ2EE all these RFC are working fine and there is no error.
    Can any one suggest me how to resolve this issue.
    I am waiting for your reply.
    Regards,
    Sankaranarayanan.G
    BASIS CONSULTANT

    Hi Tuhin,
    I have one more problem now. Intially i have configured my PI development portal.But after some days in  my PI server when i ran SXMB_IFR is detecting wrong poral now. I have tried to change from my EXCHANGE Profile under integratrion server parameters i have changed PORT,URL and others.
    but it is not come to effect. can you please help me where do i need to chage the portal?
    I am waiting for your reply.
    Regards,
    Sankar.G

  • Proxy Runtime for Business System not visible in RWB.

    Hi,
    We are running SAP PI 7.10 SP7.
    The current landscape contains currently 2 SAP R/3 application systems and 1 SAP PI systerm that are all registered with the SAP PI SLD.
    There is Business Systems configure for both the Application systems in the SLD from the registration.
    In the ID it was possible to import these Bussiness systems and to use them in scenarios. It is even posible to post messages to both IE on these Business Systems. If tcode SPROXY is executed on both these business systems then it connects to the same ESR. On both business systems I have created a "PIRWBUSER" with the same password and roles as on SAP PI.
    Now my ploblem is that I only see one proxy runtime in the RWB under Integration Engines.
    Please can you assist in this matter?
    Regards
    Willie Hugo

    Hi,
    The problem is solved with patches to the following JAVA components.
    MESSAGING 7.19
    SAP_XIAF7.17
    SAP_XITOOL7.14
    Regards
    Willie Hugo

  • Base64 in Proxy Runtime

    Hi gurus,
    I'm planning to use Base64 for sending/receiving binary data to R/3. I generated a proxy for a receiver interface which has a field of type Base64 and it is generated as RAWSTRING.
    When I send a test XML through a web service (for my SOAP-PI-Proxy scenario) which has a correct Base64 data in the relative field, the proxy runtime in R/3 throws "Error in Control Framework" in SMQ2, even before the message reaches the proxy code.
    How does the proxy runtime handle Base64? Does it actually convert it to RAWSTRING or I should use different xsd types for inbound interfaces(such as hexString maybe?). If yes, how to convert?
    And what about sending? Is it possible to send Base64 from client proxies?
    Regards,
    Gökhan

    what is the Type that you have defined in DT of XI/PI....it should be xsd:base64Binary.......then you can build your proxy accordingly to accept the base64 message...check it out...
    Regards,
    Abhishek.

  • PCK and Java Proxy Runtime

    Hello,
    I am a newbie to XI world and have some questions regarding PCK and Java Proxy Runtime. Is it possible to send the message from PCK by using Java Proxy Runtime as Sender?
    If yes what exactly configuration steps have to be done on PCK side like SLD & ExchangeProfile configuration according to Configuration Guide or XI Receiver Adapter with Receiver agreement creation?
    Thanks in advance,
    Viktar

    Hi Stefan,
    Thanks for information. We successfully checked a simple test scenarion JPR -> PCK -> File. It was necessary to configure properly XI Sender and File Receiver adapters on PCK.
    SLD and Exchange Profile were not required to be configurable but in this case we have to use MessageSpecifier interface in client proxy for sender and receiver determinations.
    Regards,
    Viktar

  • PI Proxy runtime RFCSYSTEM

    Hi Every one,
    when i try to active Proxy runtime RFCsystem on runtime workbench i am not able to activate it. i here by enclosing the with following error, Kindly do the needful ASAP
    An error occurred: Message: Exception in Method: CentralTrexManager: activateIndex( String ). TrexException: Failed to activate Trex service. Message: Message: OperationFailedException in Method: CentralTrexManager: setAbapActivation( Sxms_Indexing_Activate_Input ). CentralTrexException: JCO call failed. Root cause: null; severity: FATAL; localized message: Unable to log on to system LXI in language en with user PIRWBUSER; To-String: com.sap.aii.rwb.exceptions.OperationFailedException: Unable to log on to system LXI in language en with user PIRWBUSER; To-String: Class: com.sap.aii.rwb.web.trex.CentralTrexException : Message: OperationFailedException in Method: CentralTrexManager: setAbapActivation( Sxms_Indexing_Activate_Input ). CentralTrexException: JCO call failed. Root cause: null; severity: FATAL; localized message: Unable to log on to system LXI in language en with user PIRWBUSER; To-String: com.sap.aii.rwb.exceptions.OperationFailedException: Unable to log on to system LXI in language en with user PIRWBUSER
    regards
    Ramesh

    Hi Ramesh,
    The PIRWBUSER is used for retrieving data from your R3 backend proxy and XI system.
    This user must exist in your R3 proxy system ie.. backend  with the same password that is in your XI system.
    So, check whether the password is the same in Exchange Profile, in XI and in your R3.
    Furtheremore, check that this user is not locked in any system.
    Regards
    joel

  • Alerts from Proxy Runtime

    Hi,
    I am in the position at the moment where I am able via the ALT framework to sent alerts generated from error message in sxmb_moni on the SAP PI system. This I achived using ALT Framework alert categories and Alert Rules Configuration in the RWB.
    However in A2A scenarios where messages are exchanged between SAP ECC systems SAP PI I would like to enquire about how the proxy runtime errors that occure on the SAP ECC side (Sending and Receiving) is captured and sent as alerts.
    So in essence if a message goes into an error state on the SAP ECC proxy side in sxmb_moni then I would like to receive an alert via mail to this end.
    Your assistance in this regard with be highly valued.
    Regards
    Willie Hugo

    Willem,
    However in A2A scenarios where messages are exchanged between SAP ECC systems SAP PI I would like to enquire about how the proxy runtime errors that occure on the SAP ECC side (Sending and Receiving) is captured and sent as alerts.
    Nothing that PI can do in this situation. PI can raise alerts on IE and AE errors. The ECC system needs to raise alert for errors happening at their end.
    So in essence if a message goes into an error state on the SAP ECC proxy side in sxmb_moni then I would like to receive an alert via mail to this end.
    What do you mean by "receiving an alert via email to this end"? You want the alert email to be sent to PI or to an individual? Either case, it can be achieved. Please elaborate your requirement.
    Regards,
    Neetesh

  • TS3694 Have error message ....Runtime Error! program: C:\Program Files (X86)\itunes\iunes.exe   R6034

    Have error message ....Runtime Error! program: C:\Program Files (X86)\itunes\iunes.exe   R6034

    Apple's advice on this issue can now be found here: TS5376: iTunes 11.1.4 for Windows: Unable to install or open.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See the user tip Backup your iTunes for Windows library with SyncToy for a suggested strategy.
    If you have difficulty downloading the iTunes setup file try clearing your browser's cache or using an alternate browser.
    If content is missing from the library following the repair see Empty/corrupt iTunes library after upgrade/crash.
    For device connectivity issues following the repair see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
    MobileMe is a discontinued service and should be removed if present. See HT2992: MobileMe: Uninstalling the MobileMe Control Panel for Windows for details.
    tt2

  • Proxy runtime configuration in PI 7.1

    Hi Experts,
    How to do proxy runtime configuration in PI 7.1?
    Please send any documents or link available for the same.
    Regards,
    Nidhi Kukreja

    Proxy Configuration :
    Create Logical System for ECC & PI both side.
    On PI Configure :
    1. Create RFC Destination from PI to ABAP (Type : H).
    2. Make an entry in SXMB_ADM for Integration server.
    3. Activate Services in SICF.
    On ECC Configure :
    1. Create RFC Destination from ABAP to PI (Type : H).
    2. Make an entry in SXMB_ADM for Application server.

  • Proxy Runtime error

    Hello..
         In FILE-XI-BW scenario... I'm getting error in adapter monitoring (integration engine --> Proxy runtime )
    Error is..  "Unable to log on to system D03 (BW system) in language en with user XIRWBUSER...
    Can any one tell me what might be the problem..
    Thanks..

    Hi Padma
    Can you check your configuration Tab in Runtime workbench. If there also you are getting this same error.
    Create a port in your business system using Tcode : we21.
    Also have you set in your proxy System the destination to Integration Server?
    If not:
    Goto sxmb_adm -> Integration Engine configuration -> Role of Business System = Application System with corresponding integration server dest//RFCdestinatio2yourIntegrationServer.
    Best Regards
    - lalit -

Maybe you are looking for

  • Problem with Bridge CS6 and zooming to 100%

    When I click on a file to zoom to 100% it zooms to 800%. I had the same problem in CS5 and fixed it by deleting the com.adobe.bridge.plist, but this does not work with CS6 and I don't even find the plist. I have a Mac with OS X 10.8.2. I found two pl

  • Is there a way to edit the text in a completed video?

    Hello community, I am completly new to Ae and I have a question: How can I edit text in downloaded video sequence? I can't find any kind of text layer and it doesn't work with the text tool as well. I hope someone can help! Thank you!

  • Customer table with delivery class 'A' asking for a request

    Hello. I've built an customer table and defined the delivery class 'A' ... Application table (master and transaction data). Data Browser/Table View Maint. 'X' ... Display/Maintenance Allowed. Why is this type of table definition asking for a change r

  • Small error in Spyr Data Set overview

    Just a small error in the Spyr Data Set overview page which might confuse beginners trying to understand new things like Xpath. http://labs.adobe.com/technologies/spry/articles/data_set_overview.html Under Figure 4. Selected nodes for XPath "/gallery

  • How To Install Flash Player in i phone 4g ios 5.1.1

    How To Install Flash Player in i phone 4g ios 5.1.1