Proxy runtime configuration in PI 7.1

Hi Experts,
How to do proxy runtime configuration in PI 7.1?
Please send any documents or link available for the same.
Regards,
Nidhi Kukreja

Proxy Configuration :
Create Logical System for ECC & PI both side.
On PI Configure :
1. Create RFC Destination from PI to ABAP (Type : H).
2. Make an entry in SXMB_ADM for Integration server.
3. Activate Services in SICF.
On ECC Configure :
1. Create RFC Destination from ABAP to PI (Type : H).
2. Make an entry in SXMB_ADM for Application server.

Similar Messages

  • Runtime Workbench Proxy Runtime Configuration

    Hi
    I'm trying to setup the RWB proxy runtime configuration. However our ERP system shows up as an ALE-Logical system and not a Business System in the Configuration tab of the RWB and doesnt appear at all in the Component Monitoring tab so we cant monitor messages from it through the RWB.
    We've tried deleting the business and technical system and re-registering them with RZ70 as well doing a CPA Cache refresh. But that hasnt resolved the issue.
    I have compared this system to another system in the SLD which does show up as a Business System and can be monitored through Component Monitoring. They seem to be exactly the same.
    Is there some kind of setting we are missing on the ERP system?
    Thanks
    Riaz

    Hi Riaz & kesava,
    RWB Proxy runtime setup can be seen from RWB->Component Monitoring under Components section Domain XI->Integration Engine.
    Check the following
    1)Can the SLD be reached?  - RFC destination, ping, getLCR server, read cache, BS defined
    2) Does the Integration Engine know the business system?   - Business system name = BS_100, Role = Application System
    3)Are roles in SXMS_CONF_ITEMS and SLD consistent?   - Role = Application System
    4)Has an Integration Server destination been defined?   Destination 'XIabcd100' to the Integration Server 
    Cheers
    Veera

  • Proxy Runtime configuration in Quality

    Dear All,
    I am sending data from XI to BI through server proxy.
    We have link between ERP quality and XI development. Do i have to do Proxy runtime configuration in quality server directly. Do I need to do it manually or transport from development?
    Regards.
    SM.

    > We have link between ERP quality and XI development. Do i have to do Proxy runtime configuration in quality server directly.
    > Do I need to do it manually or transport from development?
    You have to do this manually.

  • Idoc Communication Configurations and Proxy Runtime Configurations for PI

    We have a fresh PI 7.1 system, fresh ECC6 system, and an existing 4.6C system.
    is there any blog/doc with step-by-step instructioins/screenshots for following tasks:
    1. Configuring Abap proxy runtime between ECC6 and PI 7.1 Systems, for using sproxy from ECC6.
    2. Configuring for IDOC communication between ECC6 and PI 7.1
    3. Configuring for IDOC communication between 4.6C system and PI 7.1
    It involves creating of sm59 rfc destination creations, usage of idoc related transactions on PI system and the other system.. I searched on sdn/forum, but it seems to be addressing specific issues faced.
    Pls suggest any step-by-step instructions docs/blogs available.
    thanks in advance.
    Madhu.

    Madhu,
    Refer the links below:
    1. /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    2& 3 :
    https://wiki.sdn.sap.com/wiki/display/XI/SAPR3%28Idocs%29ToXI--Steps+Summarized
    http://www.riyaz.net/blog/xipi-settings-in-r3-partner-system-to-receive-idocs/
    /people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
    https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c&overridelayout=true
    http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-a-step-by-step-approach/
    Also, I  think u hv just started learning XI ..so following link might help:
    http://wiki.sdn.sap.com/wiki/display/NWTech/QAforPI-Onestopforall%28Part-1%29

  • Java Proxy Runtime:  failure to locate proxy bean on inbound call

    Hello gurus of the SDN,
    I have been trying to get an inbound Java Proxy scenario to work in XI 3.0 but have not been able to get the JPR to recognize my generated and deployed java code.  My scenario is set up to call the java proxies generated from a message interface based on the MATMAS Idoc.  I successfully deployed the generated java proxies on the same host box as is running the XI instance.  The objects are named as follows
    Message interface on XI = Inbound_MATMAS04
    Generated proxy bean = Inbound_MATMAS04_PortTypeBean
    Implementing class = InboundMATMAS04_PortTypeImpl
    Implementing method = inboundMATMAS04
    I used the JPR transport servlet to register the interface and implementing class but am not sure if I did this correctly.  I used the following entry in my web browser:
    http://nadcp786:50000/ProxyServer/register?
    ns=urn:xiTrainingLabs:groupXX:SAP&
    interface=InboundMATMAS04&
    bean=InboundMATMAS04_PortTypeImpl&
    method=inboundMATMAS04
    I also tried using the localejb/ prefix for the bean name in the above step since the code is co-located.  When I trigger the scenario, the Idoc info is passed into XI and the Java Proxy Runtime is called, but I get the following error response back in the SOAP header:
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="PARSING">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Cannot locate proxy bean InboundMATMAS04_PortTypeImpl: com.sap.aii.proxy.xiruntime.core.XmlInboundException: Cannot locate proxy bean InboundMATMAS04_PortTypeImpl</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Finally, appended at the end of this post is the audit log of the messaging system showing that the JPR is called but without being able to locate the bean.  I think I am missing a configuration step somewhere, but can’t figure out what it is!!  Can anyone help me? 
    Many thanks in advance.
    Regards,
    Nick Simon
    Time Stamp     Status     Description
    2004-10-25 19:47:32     Success     The message was successfully received by the messaging system. Profile: XI URL: http://nadcp786.bcsdc.lexington.ibm.com:50000/MessagingSystem/receive/JPR/XI
    2004-10-25 19:47:32     Success     Using connection JPR. Trying to put the message into the receive queue.
    2004-10-25 19:47:32     Success     The message was successfully retrieved from the receive queue.
    2004-10-25 19:47:32     Success     The message status set to DLNG.
    2004-10-25 19:47:32     Success     Java proxy runtime (JPR) accepted the message
    2004-10-25 19:47:34     Error     JPR could not process the message. Reason: Cannot locate proxy bean localejbs/InboundMATMAS04_PortTypeImpl
    2004-10-25 19:47:34     Error     Delivery of the message to the application using connection JPR failed, due to: Cannot locate proxy bean localejbs/InboundMATMAS04_PortTypeImpl.
    2004-10-25 19:47:34     Error     The message status set to FAIL.
    2004-10-25 19:47:34     Error     Asynchronous error detected: Cannot locate proxy bean localejbs/InboundMATMAS04_PortTypeImpl. Trying to report it.
    2004-10-25 19:47:34     Error     Asynchronous error reported.
    Message was edited by: Nicholas Simon

    Hi
    How do you determine the JNDI naming of the a EJB?
    I have following entry in JNDI directory in the root
    Object Name FlightQueryIn
    Class Name javax.naming.Reference
    Context Name 
    Object Value Reference Class Name:
    Type: clientAppName
    Content: sap.com/JavaProxyEAR
    Type: interfaceType
    Content: remote
    Type: home
    Content: com.sap.aii.proxy.xiruntime.core.AbstractProxyInboundHome4
    Type: ejb-link
    Content: FlightSeatAvailabilityQueryIn_PortTypeBean
    Type: jndi-name
    Content: FlightQueryIn
    Type: remote
    Content: com.sap.aii.proxy.xiruntime.core.AbstractProxyInboundRemote4
    I tried to register the bean with JPR using:
    http://ctsapxid01:50100/ProxyServer/register?ns=http://sap.com/xi/XI/Demo/Airline&interface=FlightSeatAvailabilityQuery_In&bean=FlightQueryIn&method=flightSeatAvailabilityQueryIn
    I followed the following blog
    http://wiki.sdn.sap.com/wiki/display/Java/JavaProxyChangesinPI7.1fromPI7.0
    Thanks,
    Chris

  • Error in Runtime Workbench, Component Monitoring, Proxy Runtime

    Hi,
    I have the following error in the Runtime Workbench, under Component Monitoring->Integration Engines->Proxy Runtime. The error message is Ping Status: “Unable to logon to system xxx in language EN with user XIRWBUSER”. However, I am unable to find out where the account and password are specified in order to correct this. Any help would be appreciated.

    Hi,
    it can be for some system configured on http destination or the sld system configured for this server.
    take a look at tx sxmb_adm for the http destination to discover witch destination is been used. then, on sm59, find the server that is been called for this http destination and check on that server if this user is ok there.
    to check sld, go to tx sld_apicust discover witch is the sld system configured for this server. After log on to sld system and check the user.
    Maybe the user is ok on the destination system, so, check the password on sm59 (if the problem is with an http dest) or sld_apicust (if the problem is the connection to sld).
    regards.
    roberti

  • Proxy Runtime error

    Hello..
         In FILE-XI-BW scenario... I'm getting error in adapter monitoring (integration engine --> Proxy runtime )
    Error is..  "Unable to log on to system D03 (BW system) in language en with user XIRWBUSER...
    Can any one tell me what might be the problem..
    Thanks..

    Hi Padma
    Can you check your configuration Tab in Runtime workbench. If there also you are getting this same error.
    Create a port in your business system using Tcode : we21.
    Also have you set in your proxy System the destination to Integration Server?
    If not:
    Goto sxmb_adm -> Integration Engine configuration -> Role of Business System = Application System with corresponding integration server dest//RFCdestinatio2yourIntegrationServer.
    Best Regards
    - lalit -

  • Integration Engine Proxy Runtime Error

    Hello,
    I have  ECC and PI server for my landsacpe. When i ran SXMB_IFR tcode in my ECC server i got the follwing error under Runtime work Bench
    Proxy Runtime - it is shows red color.
    Unable to log on to system ECC120   in language en with user PIRWBUSER  
    Details for Ping Status
    Message: Unable to log on to system ECD210 in language en with user PIRWBUSER
    Stacktrace:
    com.sap.aii.rwb.exceptions.OperationFailedException: Unable to log on to system ECD210 in language en with user PIRWBUSER
    at com.sap.aii.rwb.core.XIAbapRTCComponent.getConnector(XIAbapRTCComponent.java:114)
    at com.sap.aii.rwb.core.XIRTCComponent.ping(XIRTCComponent.java:209)
    at com.sap.aii.rwb.web.componentmonitoring.model.CompTestModel.doPing(CompTestModel.java:581)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doPing(CmDynPage.java:425)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.updateTests(CmDynPage.java:525)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.selectNode(CmDynPage.java:552)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.process_treeClick(CmDynPage.java:481)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.sapportals.htmlb.page.DynPage.doProcessCurrentEvent(DynPage.java:172)
    at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:115)
    at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
    at com.sapportals.htmlb.page.PageProcessorServlet.doPost(PageProcessorServlet.java:22)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmPageProcessor.doPost(CmPageProcessor.java:35)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
    at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
    at jsp_FC_Secure1229621978943._jspService(jsp_FC_Secure1229621978943.java:15)
    at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
    at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
    at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    When i checked  my PIRWBUSER password in abap and poratal level there is no conflicts. Password is correct.
    For integration i have created three RFC also
    LCRSAPRFC,SLDAPIRFC,SAPJ2EE all these RFC are working fine and there is no error.
    Can any one suggest me how to resolve this issue.
    I am waiting for your reply.
    Regards,
    Sankaranarayanan.G
    BASIS CONSULTANT

    Hi Tuhin,
    I have one more problem now. Intially i have configured my PI development portal.But after some days in  my PI server when i ran SXMB_IFR is detecting wrong poral now. I have tried to change from my EXCHANGE Profile under integratrion server parameters i have changed PORT,URL and others.
    but it is not come to effect. can you please help me where do i need to chage the portal?
    I am waiting for your reply.
    Regards,
    Sankar.G

  • Proxy Runtime errors in Integration Engines at RWB

    Hi Experts,
    We have configured the point to point configuration scenario in our landscape. I have two ABAP systems exchanges data using PI. I have configured both the ABAP systems as Application Systems and Corresponding Integration server as my PI system.
    In RWB of PI I can see both these systems as proxy run time under Integration Engines, but are in error status.
    Path to the same is Component Monitoring>Components>Integration Engines (here I can my systems as Proxy Runtime BSAB200, Proxy Runtime BSID200).
    When run the test got the below error.
    Can the SLD be reached?  RFC destination LCRSAPRFC does not exist
    Does the Integration Engine know the business system? 
    Are roles in SXMS_CONF_ITEMS and SLD consistent?
    Why do we need to create the RFC destination again when we select the related integration server as PI.
    Can any one throw some light whey are these errors are occured.
    Thanks,
    Chinna

    Can the SLD be reached? RFC destination LCRSAPRFC does not exist
    Reached to SLD but not to exchange profile.
    Does the Integration Engine know the business system?
    Yes.
    Why do we need to create the RFC destination again when we select the related integration server as PI.
    A central SLD scenario involves a central SLD, but not a central exchange profile.
    The exchange profile used is always the one on the Integration Server the
    application system connects to the exchange profile using the SM59 destination
    LCRSAPRFC.
    Regards
    Pothana

  • Proxy Runtime for Business System not visible in RWB.

    Hi,
    We are running SAP PI 7.10 SP7.
    The current landscape contains currently 2 SAP R/3 application systems and 1 SAP PI systerm that are all registered with the SAP PI SLD.
    There is Business Systems configure for both the Application systems in the SLD from the registration.
    In the ID it was possible to import these Bussiness systems and to use them in scenarios. It is even posible to post messages to both IE on these Business Systems. If tcode SPROXY is executed on both these business systems then it connects to the same ESR. On both business systems I have created a "PIRWBUSER" with the same password and roles as on SAP PI.
    Now my ploblem is that I only see one proxy runtime in the RWB under Integration Engines.
    Please can you assist in this matter?
    Regards
    Willie Hugo

    Hi,
    The problem is solved with patches to the following JAVA components.
    MESSAGING 7.19
    SAP_XIAF7.17
    SAP_XITOOL7.14
    Regards
    Willie Hugo

  • Difference between WS runtime and proxy runtime

    HI,
    I'm new to PI/XI. 1) Could anyone please explain about the real difference between WS runtime and Proxy runtime?
    2) How to configure the scenario's for WS communication and proxy communication?
    3) what is the adapter type we should use for this in ID?
    4) How to convert the proxy to webservice? etc.
    Thanks in adavnce
    Regards,
    Baskaran K

    I'm new to PI/XI.
    I would suggest that you first make use of the Search facility of SDN. If I am not wrong all your questions will be answered by a Search.
    Regards,
    Abhishek.

  • Runtime Workbench - Proxy Runtime

    In the Runtime Workbench, I got an error status in the component "Proxy Runtime".
    Result of Self-Test:
        Can the SLD be reached?   (successful)
        Does the Integration Engine know the business system? (error)
        Are roles in SXMS_CONF_ITEMS and SLD consistent? (error)
    Details:
        Tested: RFC destination, ping, getLCR server, read cache, BS defined
        Function LCR_GET_OWN_BUSINESS_SYSTEM failed (return code = 1)
        No role for business system defined in System Landscape
    Can anyone tell me how to solve this problem?

    Hi,
    This basically means that your back end system where you generate your proxy, was NOT registered in SLD properly.
    Proceed as follows in SLD:
    1. If your system has not been registered as a technical system, you will have to register it using transaction RZ70 (Prior to that, you also need to make sure the RFC destination SLD_UC has been properly configured to point to your SLD program registered in PI gateway )
    2. Create your business system referring to the technical system above, pointing to the client where you want to generate your proxy.
    Hope it helps,
    Lim...

  • PCK and Java Proxy Runtime

    Hello,
    I am a newbie to XI world and have some questions regarding PCK and Java Proxy Runtime. Is it possible to send the message from PCK by using Java Proxy Runtime as Sender?
    If yes what exactly configuration steps have to be done on PCK side like SLD & ExchangeProfile configuration according to Configuration Guide or XI Receiver Adapter with Receiver agreement creation?
    Thanks in advance,
    Viktar

    Hi Stefan,
    Thanks for information. We successfully checked a simple test scenarion JPR -> PCK -> File. It was necessary to configure properly XI Sender and File Receiver adapters on PCK.
    SLD and Exchange Profile were not required to be configurable but in this case we have to use MessageSpecifier interface in client proxy for sender and receiver determinations.
    Regards,
    Viktar

  • Alerts from Proxy Runtime

    Hi,
    I am in the position at the moment where I am able via the ALT framework to sent alerts generated from error message in sxmb_moni on the SAP PI system. This I achived using ALT Framework alert categories and Alert Rules Configuration in the RWB.
    However in A2A scenarios where messages are exchanged between SAP ECC systems SAP PI I would like to enquire about how the proxy runtime errors that occure on the SAP ECC side (Sending and Receiving) is captured and sent as alerts.
    So in essence if a message goes into an error state on the SAP ECC proxy side in sxmb_moni then I would like to receive an alert via mail to this end.
    Your assistance in this regard with be highly valued.
    Regards
    Willie Hugo

    Willem,
    However in A2A scenarios where messages are exchanged between SAP ECC systems SAP PI I would like to enquire about how the proxy runtime errors that occure on the SAP ECC side (Sending and Receiving) is captured and sent as alerts.
    Nothing that PI can do in this situation. PI can raise alerts on IE and AE errors. The ECC system needs to raise alert for errors happening at their end.
    So in essence if a message goes into an error state on the SAP ECC proxy side in sxmb_moni then I would like to receive an alert via mail to this end.
    What do you mean by "receiving an alert via email to this end"? You want the alert email to be sent to PI or to an individual? Either case, it can be achieved. Please elaborate your requirement.
    Regards,
    Neetesh

  • Error while opening the CAF runtime configurator

    Dear Experts,
    I am very much new to the CAF, and working on it initially.
    Let me explain what exactly i did.
    1. Created a New development Project.
    2. Created an entity under entity services.
    3. Created an operation under operation tab. This is a findby operation which uses one of the attributes as the search criteria.
    4. Saved the project.
    5. Right clicked on the project and selected Generate code.
    6. Now right clicked on the project, and then Selected BUILD, and in the popup i deselected Build if Neccesary check box.
    7. Now right click on the project and choosen Deploy to J2EE.
    8. Under Tasks/Properties tab, i am getting an error saying that, Failed to deply atleast one .Ear file. It also says that it needs administrator rights.even though user login which i used for SDM in the step 8 has Administrator role.
    9. Now, when i goto the browser, and type the url: http://<host>:<port>/caf, where replacing host with my hostname and port with the port, I am getting an exception.
    It says " Cluster wide exception.... " and some other thing.
    Finally, I am struck up with these two errors..
    1. Error while deploying it in to J2EE .
    2. Unable to open CAF runtime configurator.
    Hope i am clear in conveying the problem.
    Need you help and guidance.
    Regards,
    Shashikanth. D

    Hello,
    Please check the Character formats / Text stlyes/Paragarph defined within Main window, The error is because of some inconsistency withinthe layout component.
    Regards,

Maybe you are looking for