Message Rules Problem

I have 2 IMAP accounts, one from the university where I work, and another for personal use with lots of storage space. While I have plenty of quota on both accounts, I want to be able to make a backup copy of my University emails as they come in to my personal IMAP account.
Using the Message Rules, I have been able to do so, however, both messages on the accounts remain marked as unread. I have been trying to figure out how to make the new copied messages to the personal account be marked as read while keeping the original emails as unread.
The way it is now interferes with some of the Smart folders I have setup.
Thanks!
15" PowerBook G4   Mac OS X (10.4.3)   1GB RAM, 80GB HDD, DVD-R/CD-RW

Hi Erik,
I am on SP04 and i am able to select the parameter and drop down appears. Please see the screenshot below.
Regards,
Sriram

Similar Messages

  • The message "A problem has occurred trying to process your request. Please try again later. We apologise for any inconvenience this may have caused." is displyed when I try to log on to my internet banking. Please can you tell me why?

    Since upgrading to the latest version of Firefox, I'm now getting the message "A problem has occurred trying to process your request. Please try again later. We apologise for any inconvenience this may have caused." when I try to log onto my internet banking site. This occurs after going thru the first two steps of the login process. I don't get this problem when I login to all my other bookmarked sites, or when I use Internet Explorer. I'm using Windows XP. Any suggestions? (Note: I've just reloaded version 6 of Firefox, but it's not made any difference.)

    See here  >  http://support.apple.com/kb/HT1527
    From Here  >  http://support.apple.com/kb/TS1368
    More info here  >  http://www.apple.com/support/itunes/downloading/

  • Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

    Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?

    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

    HP Pavillion DV7 notebook PC
    Windows 7 64
    intel I5
    6 gig memory
    service pack 1
    I am trying to identify a problem with my HP Pavillion dv7 laptop
    Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
    I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
    I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
    any help would be great this PC has a lot of info on it and I dont think it is a lost cause
    thanks

    Hi duddy, sorry to hear that you are having issues with your computer over heating.  I have found a document that will assist you with Restoring the BIOS.  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
    I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue.    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
    If you are still having issues, please let me know and I will be happy to offer more assistance..
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • TS4083 My folders that message rules divert emails to don't update when I open Mail on my iPad or iPhone. Only the inbox does. I have to click on each folder for it to update. Is there a way around this? The folders update on my mac fine when i check mail

    My folders that my message rules on iCloud divert emails to don't update when I open Mail on my iPad or iPhone. Only the inbox does. I have to click on each folder individually for it to update. A real pain as I have about 30 folders. Is there a way around this ? The folders update on my mac fine when i check mail without having to select each one of them. Can the iPad and iPhone do the same thing?

    My Mac has 4 mail accounts coming into it, but you are correct, one of them is a POP account, (and unfortunately it is the main @ account, and is the one associated with my apple id, since we've had it for years).  I couldn't figure out how to replace this with the Imap version, short of deleting that account entirely. 
    Is this what I have to do? 
    Thanks for your help!

  • Shortly after launching into itunes, it freezes and I get the following message: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. How do I resolve this issue?

    Shortly after launching itunes, the program freezes and gives me the following message:A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. The program then closes, even if I have not completed what I am doing. How do I resolve this problem?

    That is what I thought. Cannot figure out how to turn it off, though.
    However, when I talked to her over the phone, she is definitely using Firefox. I tried to access her Internet Explorer, but it has been deactivated, I believe by Firefox.
    She primarily uses the Internet to communicate with her kids, grandkids, and great grandkids. Her e-mail account is with Yahoo Mail, and she uses Firefox to access it. Occasionally, she uses the web to look up information, and may have downloaded a virus.
    Do you think there's something in Yahoo Mail that conflicts with Firefox? Is there some remnant of Internet Explorer that needs to be deactivated? Could she have a virus?
    Any information would be gratefully appreciated. I live 7 hours away, and can only help her over the phone. I'm trying to develop a course of action that I can use with her. I know a little bit about Firefox, so need your expertise.

  • ITunes will not open, no message of problems

    iTunes does not show up whenever I click on it, and no message of problems comes onto the screen. Absolutely nothing at all happens. Help?

    See if QuickTime will open. iTunes uses QT codecs to play everything.
    Sometimes QT will give an error message, where iTunes won't.
    Also here is an article with lots more ideas to try:
    http://docs.info.apple.com/article.html?artnum=93976

  • I rented a movie (dark shadows) but I can not see it, because a message appear "Problem loading...try again later". Is not a problem connection. I tried a lot of times to watch the movie and I didn't can.

    I rented a movie (dark shadows) but I can not see it, because a message appear "Problem loading...try again later". Is not a problem connection. I tried a lot of times to watch the movie and I didn't can.
    Thanks
    Celeste

    I rented a movie (The Hobbit)...but  it stops loading.
    The movie costs CHF 7.50.
    A phone call to the support team costs CHF 46.-- !!!!!
    What do you think I will do?
    Pisella Verde

  • XMII 12.0 SP2 message rules issues

    I'm running xMII 12.0 SP2 on NW 7.0 SP13 and I have some questions and comments.
    1. In the Message Processing Rules - Parameters section, what does the "Value" mean?  And why does it have to be set to "ReceivedMessageXML" for the "Name" checkbox to remain checked?  Is this some internal xMII parameter name which the message processor uses to map the input parameter?  It it must be "ReceivedMessageXML" why have it at all?  Are there other valid Values?
    2. Also in Message Processing Rules, there are some strange browser issues.  In IE 7, if you create a new Rule all the fields are cleared and server name defaults to the first choice in the combo.  If you look at the Message Type radio buttons, the IDOC button is missing.  You have to select a transaction before the button appears.  This doesn't occur in Firefox 2.0
    3. Still in Message Processing Rules with Firefox 2.0, when you click "New" rule, the category/transaction fields remain  from the previous rule (depending on whether the previous rule was a category or transaction type rule).  In IE 7, clicking "New" clears those fields.
    4. There's a browser issues in the portal too.  It works fine in IE 7, which is likely the officially supported browser, but in Firefox 2.0, the the top level portal items cannot be expanded to show their contents.  I'm guessing Firefox is not a supported browser...
    5. We ran the latest migration tool against our 11.5 code - approximately 70 transactions, a couple dozen irpts, javascript, images, 100 or so query templates and a smattering of display templates and it worked flawlessly.  I noticed that the migrated IDOC listener rules are named "Rule 1", "Rule 2", etc.  However, you cannot save rules with spaces in their names.  Is this intentional?  We copied/renamed them all anyway to match our naming scheme. 
    6. Does the xMII Best Practices document address naming conventions of some of these new xMII 12.0 features?  e.g. should message rule names have the company name as a prefix such as "Visiprise_DMO100_MATMAS"?
    Thanks much!
    -tim

    Partha, thanks for the response.  If you have a minute, I have a few more questions/comments:
    1. Are there other input message parameters available besides "ReceivedMessageXML"?
    2. If not, and you can only send in the "ReceivedMessageXML", why do you need to set the Value column to "ReceivedMessageXML"?  Isn't the checkbox enough to indicate which transaction input parameter you want the message XML mapped to?
    3. you say "if u select the check box against one or more transaction input params..." - why would you ever select more than one?  Isn't the entire message payload going to be sent as an XML type parameter?
    4. I like the idea of being able to set other input parameter values from the message rule.  The trick is to not check their checkbox, right?
    Thanks,
    -tim

  • RFC Message: Internal Problem, in REDWOOD CPS.

    We have Redwood CPS 7 connected up to SAP IS-U Supply.
    We keep getting random RFC errors when executing a script.
    Any Idea
      ERROR LOG   *******************
    ABAP_RUN: R/3 call BAPI_XBP_JOB_OPEN failed
    RFC error: XM034
    RFC Message: Internal problem (function BAPI_XBP_JOB_OPEN)
    TCTRETURNS/        : deleted
    /ERROR LOG   *******************

    Hi,
    if this is a random issue I assume that the authorizations of the CPS communication user are OK, otherwise please verify:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/49/bb35b8623a489aa63abd9f5ebf2448/frameset.htm
    If this random issue happens only if you execute your custom script, I would assume that the script wants to create a job with invalid data. For example: some data is missing or wrong like start date/time, job class, job user, job name.
    Let's analyze what you have posted here:
    RFC error: XM034
    RFC Message: Internal problem (function BAPI_XBP_JOB_OPEN)
    -> XM034 point to the XMI log
    -> use transcation RZ15 to analyze the XMI log
    -> XM034 means "problem detected" (see appendix 8 of document ftp://ftp.sap.com/pub/icc/bc-xbp/BCXBPDOC70V3.pdf)
    I locked into the code and indeed it seems that function BAPI_XBP_JOB_OPEN returns this message if the job cannot be created.
    So if Sys- and XMI-Log cannot help you in solving this issue, I would create a message for dev. support.
    Cheers,
    Martin
    http://service.sap.com/jsm

  • Message rule for sent messages

    Hi,
    I have successfully converted and repaired all my Outlook Express mail to Apple Mail 3.5 with Emailchemy. I have aprox 450 folders and 5000 mails. I have used more than 200 rules to organize my incoming messages but I cannot find the way to store "sent messages" in the right folder. I don´t want to store my replies in sent messages. I need my reply inside the folder where the message rule previously stored my incoming message. is it possible?
    Warmest regards,

    There are several possibilities.
    The simplest of course is not to bother. When you reply to a message, Mail puts a link (a little anti-clockwise curved arrow) in the status column of the original message, and clicking on that brings up the reply.
    You could set up Smart mailboxes. This would leave the replies in the Sent mailbox, but also make them visible in the appropriate Smart box. The rules for the various Smart boxes would have to be designed to pick up both original messages and replies.
    If you really must get the replies into the same folder as the originals, you will need some sort of Applescript. You could for example have a Mail rule, fired by any incoming message, which runs an script to look at all messages in the Sent box, and identifies the box to move each to. How is your scripting?
    Another script-based possibility is to have a script to generate the replies. Since it would know which box it was working from, it would know which box to put the reply in, and it would require less maintenance (as your requirements change) than the previous.
    Perhaps the best solution for you, requiring the least effort, would be to use the Mail option to automatically CC (or BCC) yourself. The resulting copy is an incoming message - so your 200 rules should pick it up and move it to the appropriate mail box.
    AK

  • Can I make Message Rules in Thunderbird similar to Windows Live Mail?

    Can I make Message Rules in Thunderbird similar to Windows Live Mail? I use Windows 7 Home Premium.

    http://kb.mozillazine.org/Filters_(Thunderbird)

  • I have changed my PC, deactivated Adobe Acrobat and tried to load on new PC. Got to registration and get the message " A problem was encountered while trying to send information over internet" this is 8 standard

    I have changed my PC, deactivated Adobe Acrobat and tried to load on new PC. Got to registration and get the message " A problem was encountered while trying to send information over internet" this is 8 standard
    When I try to use it to make pdf files I get the message "Missing PDFMaker files
    It is a proper copy with serial numbers

    Moving this discussion to the Acrobat Installation & Update Issues forum.

  • My dreamweaver cs5.5  on window 7started working stop  showing message  A problem caused programe to

    my dreamweaver cs5.5  on window 7started working stop  showing message  A problem caused programe to stop work correctly       

    What's the error message you received?
    What do your logs tell you?
    What were you doing just before you got the error message?
    Nancy O.

  • How do I transfer Mail Message Rules between Macs?

    How do I transfer Mail Message rules from an iMac running OS X 10.6.8 to an iMac running OS X 10.8.5? The names of the plist files don't match.

    The easiest way to accomplish this is to *create a new admin account* in the System Preferences/Accounts Pref Pane. Once the new admin account *(make sure the Allow user to administer this computer is checked in the new account)* is set up and performing like it should (by logging into it and verifying that you can actually administer the computer), change your primary account (the account that owns your emails) to a standard account by un-checking the *Allow user to administer this computer* in the Accounts Pref Pane. You can still administer the computer with your standard account, you will have to provide your admin login and password in the Authentication dialog boxes.
    Hope this helps.
    D.
    Message was edited by: D. Fraser

Maybe you are looking for