Message server hogs CPU when clients are disconnected

Hi, I have a problem where java process for the Sun One Message Queue (3.0.1) hogs the cpu when a client is disconnected. I am trying to use the MQ in an environment where clients might crash and try to reconnect in an unpredictable fashion. Most of the time, when I kill the client and restart it, I do not see the problem. Sometimes, however, doing so makes the java process of mq take almsot 100% of Cpu and it does not go down unless i kill the mq process.
I am using asynchrnous message listeners with transactions, on a persisted queue, although i saw this problem when transaction was disabled.
Does anyone have any idea what might be the source of the problem? I hope it's just a matter of configuring MQ correctly, but i could figure it out. Help would be greatly appreciated.

Are you running the enterprise edition and
using round-robin queues with multiple
receivers ?
If so, you may be running into a timing related bug
in multiple receivers that has been fixed in service
pack releases of the software
You should contact sun support to discuss testing with
the lastest service pack.
If not, can you provide more information (platform,
# and type of receivers, etc) on how you are using
the product
Thanks

Similar Messages

How to prevent mail app on OS X & iOS from automatically marking email messages as read just when they are selected either intentionally or not

Good morning guys
is there a way to prevent mail app on OS X & iOS from automatically marking email messages as read just when they are selected either intentionally or not
thanks

On OS X, You are able to hide the preview window on the right in normal mode, or on the lower side in classic mode, by simply putting your cursor on the thin bar which is in between, and then make it as small as possible, so it goes away.
Then your messages won't be automatically read when clicked once, but only if you click them twice and a new window with the message opens.
Also, you are able to mark them as unread again, which is a silly workaround, but possible.
You can do that by right clicking and select 'Mark as...' -> unread.
On iOS, I'm not sure..

Anyone know why I don't get text messages on my ipad when they are coming from a cell phone but I will when they are sent from an ipad.

I am not getting text messages on my ipad when people are sending them from a cell phone but I do when they send them from an ipad, anyone know how to fix this???

There are no carrier supported texting plans for Ipads.
Imessage uses Apple servers and only supports ios devices.

MDNS responder hogging CPU when connected to network

Hi all.
It seems whenever I'm connected to my work's network (either via wired or wireless) my mDNSResponder service starts hogging CPU. It generally starts at 0 and works its way up to 70-80% total CPU usage. I can kill it but within a few seconds it starts back up again.
Any idea what the problem is or how to fix it? This has never been a problem in the past, and as far as I'm aware there have been no changes to the network.
Thanks!

My first psychic guess would be a messed up .cache, but...
mDNSResponder (also known as mdnsd on some systems) is a daemon invoked at boot time to implement Multicast DNS and DNS Service Discovery.
mDNSResponder listens UDP port 5353 for Multicast DNS Query packets.
When it receives a query for which it knows an answer, mDNSResponder issues the appropriate Multicast DNS Reply packet.
mDNSResponder also performs Multicast DNS Queries on behalf of client processes, and maintains a cache of the replies.
mDNSResponder has no user-specifiable command-line argument, and users should not run mDNSResponder manually.
To examine mDNSResponder's internal state, for debugging and disagnostic purposes, send it a SIGINFO signal, and it will then dump a snapshot summary of its internal state to /var/log/system.log, e.g.
sudo killall -INFO mDNSResponder
Also, not sure if this applies to OSX or not...
http://www.linuxmanpages.com/man8/mDNSResponder.8.php

After installing 10.5.6, finder and quicklook server hog cpu for 10 minutes

I installed 10.5.6. Now upon every restart the Finder and Quick Look Server use 60-80% of my cpu for 5-10 minutes. This means that I can't really do anything until these processes are done because they cause constant delays. This did not happen in the previous version of Leopard, and if it's intentional on the part of Apple, it's a mistake. Very very annoying. Any ideas how to get this to stop?

stuartwgibson,
How did you install 10.5.6?
If you used "Software Update," you might want to try installing the Mac OS X 10.5.6 Combo Update.
;~)

CSM : Sorry server and Stickyness when reals are overloaded

Hi,
I have a portal of eight real servers and one sorry server, which should redirect new user to another portal, in case of an overload condition of all eight real servers. Server load is measured on each real server using a custom developed agent, which basically measures the real CPU load. If a real server experiences an overload, the local agent uses the CSM XML interface to set the maxcons value in the CSM to stop accepting new connections. However, I want to continue accepting sticky connections (request with a valid cookie). The experience shows that the CSM does accept to create new connections to real server reaching maxcons, even if a cookie exist.
This causes a problem if we want to redirect NEW users to another portal in case of overload, but to keep EXISTING users in the server farm, even if the number of connections could increase slightly above maxconns...
How can I solve the problem ?
Thank you
Yves Haemmerli

Hi Thomas,
Thank you for your comment. I also understand this behaviour like you, however this can have a devastating effect in a global portal environment. Imagine, you have three portals distributed over the world, each having let say 8 real servers. In the real life, it is seldom to replicate data in real time between data centers, due to the distance. However, the user roles and customized bookmarks and other user-specific settings are replicated. This allows to provide a global portal to users. But if a user connects to one particular regional portal, he has to stay on this portal for the duration of the whole browser session, do you follow me ? OK, now imagine that all 8 real servers in a portal reach the maxconns, because 10'000 users are connected to the portal. For new users (users with no sticky cookie), we want to send them to another regional portal. This is achieved with the global site selection provided by the GSS for example. But for existing user already connected to the overloaded portal, we want to KEEP them on the portal ! else, as the user browser continuously opens and closes TCP sessions, all 10'000 users will be immediately transferred to the other regional portal! This means the the other regional portal will becom overloaded as well, while the first portal load will be droped to zero very quickly ! Then, we not only create a situation where users loose their data by being transferred to another portal, but we also create a oscillations in the portal load !
I really don't know if there is a mean to solve this problem...Do you have any idea ?
Regards,
Yves Haemmerli

Error message from PC Suite when starting computer disconnected

Hello!
When I start my computer and it is not connected to the Internet I get an error message.
How can I avoid this?
System:
Windows 7 64bit.
PC Suite 6.0
Regards Abbe

SE website is not written support WIN 7? Is your computer system problems, let's see the closure or disabling antivirus software or firewall. Whether installation has other brands Suite software?
System requirements
Windows XP Home, Pro, Media Center (SP3)
Windows Vista 32 & 64 bits Ultimate, Enterprise, Business, Home Premium and Home Basic (With or without SP1)
Windows 7
Pentium II - 233 MHz or more
Windows XP: 128 MB RAM
Windows Vista: 512 MB RAM
50 MB of hard drive space
Any of the following connections that are applicable for your phone: USB Cable, Infrared or Bluetooth connection.

Unity message server is offline when tyring to listen to messages from a phone, email delivery and listening to messages in outlook works fine

The problem started last night when our Exchange queues backed up due to a virtual memory error and we had to do a failover. I see the following item in the application log repeating.
Source: CiscoUnity_CsServices
Category: run
Type: error
Event ID: 1065
Description: AvCsGateway: FindCsComponentsEX failed. AvCsMgr not started.
Source: CiscoUnity_CsServices
Category: run
Type: error
Event ID: 1065
Server: Epitpvmp01
Description: AvCsGateway: FindCsComponentsEX failed. AvCsMgr not started.
When I look in the services section it shows all the services as started. I've tried manually restarting services and have rebooted the server multiple times. The web interface works just fine as well. I haven't been able to find any thing online that matches this. Has anyone seen this before or knows how to fix it?
Unity 7.0(2), windows 2003, sp2
CM 7.1.3.32900-4
Exchange 2003 sp2, windows 2003 sp2

Try restarting the AvcsGateway service.
If that does not help, re-run the Service Configuration wizard.

How to change VM Server IP address when VMs are provisioned

Dear all,
I have deployed some Oracle VM servers and provisioned some VMs running upon on them.
However, the user requests to change the management IP address of these VM servers. How can I do it?
In my practice, I need backup all VMs and remove them. Then remove these VM servers from pool. Then change management IP...add them into server pool...restore VMs from backup....
Pls correct me if I am wrong.
Thanks,
Mike

You don't have to remove or backup/restore the VMs. Just migrate them to another server (if shared storage) or to Unassigned VMs (if local storage). The machines should be stopped (not suspended). There is a bug where a suspended machine can migrate to Unassigned VMs but can't migrate back (without manual intervention on the console). If you are changing the pool virtual IP, you have to delete/recreate the server pool. This will lose the "simple names" of the disks and ISOs, so record them before deleting the pool. It will not remove the Repository contents. After recreating the pool, you can rediscover the server, present the repository and refresh its contents.

How do I get my iPhone3 to stop showing 2 new messages in the inbox when they are none there?

The mailbox icon on my iPhone has the little red bubble with a number 2 next to it, but when I go to my inbox, I don't see any unread messages. Is there something I did wrong? What do you suggest I do? Thanks!

Hey jel177!
It seems like you may need to turn off your iTunes in the Cloud features and download or sync the songs manually to your phone. Here is a link that can help you adjust those settings:
iTunes Match - iPhone
http://help.apple.com/iphone/7/#/iph6e2dfb83
Then, you can use this link to find your purchases and download them to your phone:
Download past purchases
http://support.apple.com/kb/ht2519
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I keep getting error message " server stopped responding" when trying to connect to internet via wifi

My iphone works fine using cellar network, but will not connect to internet via wifi. Ive reset network setting with no diffrence.
Any ideas?

And you can turn the WiFi button on and off?
If yes, then you next need to try to Restore your iPhone from your backup.

Files locked when Windows clients are connected to ML Server via smb

Hi,
I've got a problem with windows 7 clients that are connected to my MacMini Server.
When they open files on a shared folder, and modify them, files are locked when they try to save them.
I think it might be the op-lock option present in older versions of Mac OS X Server that can be involved, but it disapeared in Lion and older version of OS X Server.
Does someone knows how to activate/deactivate this option, or does someone already got this problem?
Server is a MacMini with 10.8.5 + Server 2.2.2
Clients are Windows 7
Thank a lot for your answers
Bertrand.

Officially, Adobe does not support opening or saving files to a server --- because so many different things can go wrong with networking.
The permissions error means that the file/directory permissions are incorrect on the file server, or that the OS or server is incorrectly reporting file/directory permissions.
Photoshop does more error checking than most applications, because we have seen so many problems in the past, and don't like applications silently losing or damaging files (which we see in other applications).

Server Cannot Detect that the Client is disconnected, why?

From what I've read, in order to make server "know" that a client is disconnected, you have to make server "write" to client socket to eventually catch an ioexception.
So I write a simple server program and a simple client program. The server "writes" to the client every 10 secs. Now I start the server and client, I can tell on the client side that for about every 10 secs, the client gets the message.
Now I terminate the client program. The server still keeps writing to the client. It's my understanding that after 1 min or so I should see an ioexception. However, 10 minutes passed and the server still keeps writing...
Why is this happening? Did I miss something?

I think it happens because the port is still open
even after the client is closed.And you should not
get IOException when you send a packet over a open
port.Err, no, you should get a SocketException when you send data to a port which has already been closed or reset by the peer.

Detecting when users connect/disconnect

I have a client application that communicates via EJB and also
subscribes to JMS topics. I need the server to programatically
detect when a client connects and to JMS and when they go away.
We want to keep course grained stats on how long someone is connected.
The WebLogic console shows when a user is connected and it their
name goes away when they disconnect - I don't want
to pay someone to stare at the console window with a stop watch
and time connections.
How can I programmatically detect when clients connects and
disconnects?

That may be a good idea but what are we supposed to do in the meantime.
any work arounds etc??
Gary Keim wrote:
I think that in general the BEA people watching these newsgroups are
developers and developers don't have the authority to issue product-related
announcements. The best way for you to be heard is via a sales
representative.
Now, the way I think this should be done in the future is via JMX. The JMS
service will have a public RuntimeMBean that you could access and to which
you would add yourself as a listener. Then it's standard JavaBean property
change notifications.
Gary
"Larry Presswood" <[email protected]> wrote in message
news:[email protected]..
Yes and no-one from BEA is picking this issue up either.
Mark Steele wrote:
This is the only message I've seen about this.
Odd. I would think that more people would want to know
stats on connections...(?)
Larry Presswood <[email protected]> wrote:
This is a big issue did you get any replys from the BEA
folks or anyone
else.
Used to you could use workspaces or events but those have
been depracated
in
6.0
Mark Steele wrote:
I have a client application that communicates via EJBand also
subscribes to JMS topics. I need the server to programatically
detect when a client connects and to JMS and when theygo away.
We want to keep course grained stats on how long someoneis connected.
The WebLogic console shows when a user is connectedand it their
name goes away when they disconnect - I don't want
to pay someone to stare at the console window with astop watch
and time connections.
How can I programmatically detect when clients connectsand
disconnects?

ADRMS::- Clients are not able to open document which permission were restricted by using ADRMS!

Infrastructure:- (i) One Sql Server 2005 running on Windows server 2003 SP2 for RMS Database Storage.
                         (ii) ADDC & ADCS (no web enrollment) running on Windows server 2003 SP2. (FFL & DFL set to 2003)
                         (iii) ADRMS Running on Windows Server 2008.
                         (iv) Clients are using either Windows 7 with Office2010 pro or Windows 8 with Office 2013.
Question: Users are able to connect ADRMS Server and restrict permission to their documents without any issue. BUT CANNOT open the restricted document even by the owner/administrator. Whenever they try to open restricted docs a message appears " Cannot
configure your computer for Information Right Management at this time. Contact your administrator if this problem continues. "
I checked > 'rms.company.com' is added to local intranet site using IE.
So far I think clients computers are not able to retrieve the rms url.
Kindly, suggest how should I approach to the solution.
NB:- I am new to ADRMS.

Hi Ashim Kumar Nath,
Have you registered SCP when installing ADRMS? If you can't remember, you can check this running ADSI Edit, connect to the configuration container in verify if those nodes exist CN=Configuration [server name], CN=Services, CN=RightsManagementServices,
CN=SCP. Right click on SCP and verify that serviceBindingInformation contains your https://rms.company.com/_wmcs/certification server name.
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

Message server hogs CPU when clients are disconnected

Similar Messages

Maybe you are looking for