Message type MBGMCR: posting of GR for a text po

Hi
Goods issues are posted by using this message type MBGMCR in R/3 system. Idocs are coming from SRM system.
We are getting an error message for an idoc of this message type MBGMCR : "No stock posting possible for this material, The material belongs to a material type whose stocks are not managed on a quantity basis".
I checked the data segment & found that this is a text PO (PO without material reference).
My question is that can we post GR of a text PO by using this message type MBGMCR.
Regards
sapmm

have you tried posting it manually with MIGO, just for testing purposes?
MIGO or MB11 usually allow to post a goods receipt even for text items, with some preconditions, like GR indicator is active.
Usually, when the receipt is based on the PO, such message should not come, because a text PO has an account assignment K, which means the costs are posted to cost center and no stock is created.
And IDocs for movements do in general the same as a manual posting, using the same program routines for posting.
This M7097 is usually coming if you have no account assignment in the PO, which means you want post to stock, but stock management is not active for the material type.

Similar Messages

Using message type MBGMCR.

Hi All,
I am trying to use message type MBGMCR as an outbound message. We have setup a new output type so that we can trigger an IDOC form MB01 using transmissionmedium 'A' for ALE processing. I am not sure what program and processing routine to use in the ouput type. I have tried program RSNASTED form routine ALE_PROCESSING, but this does not work.
Does anybody setup this message to trigger from MB01? Any help would be appreciated.
Regards,
James.

Checkout thread :
Re: BAPI_GOODSMVT_CREATE for MB01
AND
http://www.sap-img.com/abap/bapi-goodsmvt-create-to-post-goods-movement.htm
http://www.sap-img.com/abap/abap-faq.htm
FYI...
MBGMCR is an Idoc generated from BAPI_GOODSMVT_CREATE
Hope this`ll help ..!!
Thanks
Saquib

How to change P.O. duplication message type from warning to error for Order

Hi Experts,
I have a requirment to change P.O. duplication message type from warning to error for Order only not OrderTemplate. I can easily change message type in BAdI ISA_BASKET_MSGS, but I can't find the parameter to know if it's Order or OrderTemplate (DocType). If this BAdI is not good way, is there other way? and how to please?
Please advise / help..
Thanks, Jin

Thanks Easwer for your help.
The info for getting status from function is very clear and I followed you instruction and completed the coding in BAdI and tested it successfully .... Thank you very much. I need to learn where I can see the system status of the template, i.e. I1034 (Order Template) or Order or Quotation .....? if I need to filter out Quotation, I can easily do it in the BAdI. Could you please provide me more details?
Thanks again, Jin
Thanks again, Jin

Using MBGMC Message Type To Post Auto Goods Receipt in ECC

We are using Basic Idoc Type :MBGMCR02 to Post Auto Goods Receipt in ECC.
This happens when external system ( 3rd Party System) sends this message which in turn posts the GR in ECC.
Thru Goods Movement BAPI
My Question is CAN WE POST auto goods receipt thru MBGMCR02 with Inbound delivery as reference document - Instead use ASN ( Advanced shipping notification ) which is Reference document in inbound delivery to Post Goods receipt in ECC.
This is required for our integration peice with 3rd party system.
And also pl let me if we can use Basic types MBGMCR01 or MBGMCR03 to post auto goods receipt in ECC with reference to PO which has confirmation control key set and instead of passing inbound delivery number can we pass ASN number which is external delivery ( Reference ) number and post goods receipt successfully in ECC.
Would appreciate your immediate help in this regard.
Regards,
Mahesh

We have used Message type : WMMBXY with an enhancement to user exit to mark status of inbound delivery to complete after entire quantity of Inbound delivery has been received.
Thanks,
Mahesh

How to add custom field in Message type MBGMCR IDOC

Hello,
Could you please help me on below requirement.
There is standard IDOC type MBGMCR.In this IDOC type there is one segment with the name E1BP2017_GM_ITEM_CREATE.
How can we add custom filed in this segment E1BP2017_GM_ITEM_CREATE?
I tried to use Append structure.But systme is not allowing us to create custom filed in this..
It is a outbound.I created custom program to send this IDOC to other system .
Could you please help me out on this.
If you need any further details pls let me know.Thank you in advacne.
Regards

Hello Rohit,
Please create a enchancement for component /SAPSRM/WDC_UI_DO_SHIPTO.
Add new input field and label in view V_DODC_SHIPTO.
Bind the input field value with field ZZfield from structure /SAPSRM/WDC_UI_DO_SHIPTO in the context node SHIP_TO .
Regards,
Neelima

Message type EDI is not triggering for outbound deliveries

Hello,
When ever the shipment status is completed message type EDI is triggered for the outbound delivery.
However, in spite of the shipment completion the DESADV EDI message is not created in the outbound delivery.
So, i request you to help me in this issue.
Regards,
Anil

Hi,
1st please check the partner porfile for whom it is sent ( Eg -- Ship to party) using T.code WE20 in partner type ku, look for the customer for whom it is sent.
Check for the message type wheter it is add in outbound parameteres.
Finally check the varaint of shipment whether the required output is maintained in the shipment varaint and also make sure that condition record is maintained for the output.
You find some solution with this.
Regards
vk

Posting Goods Receipt with ASN number in ECC with Message type: MBGMCR

We are using Basic Idoc Type :MBGMCR02 to Post Auto Goods Receipt in ECC.
This happens when external system ( 3rd Party System) sends this message which in turn posts the GR in ECC.
Thru Goods Movement BAPI
My Question is CAN WE POST auto goods receipt thru MBGMCR02 with Inbound delivery as reference document - Instead use ASN ( Advanced shipping notification ) which is Reference document in inbound delivery to Post Goods receipt in ECC.
This is required for our integration peice with 3rd party system.
And also pl let me if we can use Basic types MBGMCR01 or MBGMCR03 to post auto goods receipt in ECC with reference to PO which has confirmation control key set and instead of passing inbound delivery number can we pass ASN number which is external delivery ( Reference ) number and post goods receipt successfully in ECC.
Would appreciate your immediate help in this regard.
Regards,
Mahesh

Thank you Vinod.
We are using MBGMCR02 to post Auto GR by using BAPI - Inbound into ECC.
We have a 3PL scenario where third Party system will push this message to us ( ECC) which in turn post Auto Goods receipt.
Here is the process:
Systems involved : SNC / ECC / 3rd Party
ASN gets published in SNC which in turn posts inbound delivery in ECC and a copy of Inbound delivery with SNC ASN number is sent to third party system.
Third party system is the Carrier ( shipper) they in turn send us the shipment confirmation when they send the goods.
When they send it to our ECC we have MBGMCR02 to post Auto GR in ECC thru BAPI calling MB_GOODS_MOVEMENT
This will post the GR with respect to inbound delivery- That works fine..
Now we are testing an scenario where instead of sendindg ASN to 3rd part system from ECC after Inbound delivery is created.
We want to send the ASN information ( Which will have PO number as well ) without ECC 's inbound delivery number directly to 3rd party system after ASN gets published in SNC thru PI - This is before inbound delivery is created in ECC.
And the requirement is when 3rd Party system sends the shipment confirmation to ECC - They will send ASN ( SNC ASN) and ECC PO number with quantity , vendor , movement type :101 , movement indicator etc - CAN in ECC when you send these information without inbound delivery posts Auto Goods receipt.
Based on SNC ASN which is external delivery number in ECC as per PO / Reference number in Inbound delivery document.
Can MBGMCR01/ 02 / 03 posts GR in ECC with these information ( Mean without the ECC inbound delivery number )
Which will allow us to avoid the step of sending ASN information along with inbound delivery to 3rd party system after inbound delivery is created - Instead will send directly from SNC / PI / 3rd party
Point to be noted is - These are SNC PO's which will always have confirmation control key.
When 3rd part send the shipemnt confirmation with SNC ASN number and PO number while posting Idoc in ECC any of MBGMCR idoc types should check / search for inbound delivery associated and post the GR in ECC
Can you pl let me know your thoughts pl
Thanks,
Mahesh

While Posting IDOC from XI to R/3 Message Type needs to be changed

We are doing mapping IN XI. For one condition we want Message Type to be ORDERS and for one condition we want Message Type to be ORDERSCHG
when posting IDOC from XI to R/3.
Pls revert anybody asap.
Regards

Hi,
>>>>It means I need to create two Interface Mappings for the same message mapping and then I can use the Interface Determination . Am I right.
no, you need two message mapping
and two interface mappings
file - orders.orders05
file - ordrchg.order05
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Message type and IDoc type for PGI-GR?

hi all,
I have to send the PGI through ALE which have to create GR . So please mention the Message type , output type of message control and IDoc type?
Thanks
Vamshi

Hi,
The Idoc Types for Post Goods Issue are
MBGMCR01 / MBGMCR02.
Pls check the Message type in tcode WE82.
For output type GOTO transaction NACE-->Application V2.
hope this helps.
Regards,
Sharath
Edited by: sharath on Jun 24, 2008 7:16 PM

Creation of New Message Type for Extended IDoc

Dear Friends,
I want to create New Message Type for MATMAS and want to Active Change Pointers accordingly. Thru this Message Type how can I able to use Extended IDoc which I have created for Basic Idoc Type MATMAS05.
I am Sending Data from SAP to XI ; Any one can help me in this How can I create the Message Type with the IDoc Extn .
for Change Pointers.
Warm Regards,
Naveen Mutyapu.

Hi naveen mutyapu,
see these links
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
http://www.allinterview.com/rss/interview-questions/new/SAP-ALE-IDocs.xml
happy learning.
thanks
karthik

Change flag deactivaion for PO output message type during change mode

Hello All,
WE are using automatic message output determination functionality for PO output type. This output type has been configured for creation and change mode under Fine tuning.
Two output type are configured, for example ZAAA is output type for ALE and output type ZBBB for archiving.
Here archiving functionality is used to transfer attachment from ERP system to SUS supplier portal as a pdf file. This is done via enhancement and the attachment transfer is working fine.
During creation mode both the output types are determined and successfully processed and as a result attachment is transferred to supplier portal which is absolutely correct. In the attachment all PO line item can be seen which works well.
Now I change the PO and add a new PO line item, system automatically default both the output type for change mode and upon saving both the output type are successfully processed.
Now here is the problem in change mode only the added PO line item is sent as an attachment to the supplier portal. Here the requirement is see all the PO line items including the once which were newly added.
Solution is if we uncheck the change flag for output type ZBBB during change mode then all the PO line item can be seen under the new attachment with new version.
Please let us know how this functionality can be acheived ... is there an user exit available.
We have a work around where we are running a background job every 3 mins and based on the last successfully processed message for output type ZAAA we are attaching first output type ZBBBfor archiving the changes and then ZAAA for sending the changes along with attachment to Supplier portal.However this solution is a temporary one , we need a concrete solution for this.
Please advise.
Thanks,
Yatin

Hello All,
Thanks for the reply,
But we cannot modify the existing print program as this print program is being used in different countries also.
We already know a solution that during change mode if we remove the change flag from output type ZBBB then all the PO line items along with the recent changes can be seen under the attachment under supplier portal.
The question comes now, how do we automate this processu2026 Is there any standard progam or user exit available.
Manually, if you add a message type ZBBB in ME22N tranasction for creation mode then all PO line item with recent changes get transferred but we need to automate this process for create and change PO transaction.
Thanks,
Yatendra

To know the programme for message type

Hi experts,
This is Venkat, I want to know how to know the programme for master type message types in ALE/ IDOC like for customer master -
SAPLVV01
Thanks in advance
Regds
Venkat

Any body have any solution ?
Message was edited by:
agrud agrud

Idoc Message type and Process Cosde for CJ01 transaction

Hi,
What is the Idoc message type and inbound Process code for CJ01 transdaction?
Is there Any standard procedure to find out Idoc Mesage type and process codes for particular application?
Thanks.

Hi,
All the sending and receiving programs(transaction) start with BD. e.g. if you want to send the material you can use the BD10 transaction and IDOC is available for the same.
Go to se93 and search for BD* and look for the description.
Regards,
Nilesh.

Inbound Idoc Type / Message Type / Process Code for Delivery via Tcode VL0N

Guys,
I need to to Idoc Type and Message type for to create Delivery ( Tcode VL01N ) for a sales order.
I tried Idoc Type DELVRY03 and Message Type DESADV, but this is for Purchase Order ( VL31N ).
Kindly help me.
Regards
Srikanth M

Guys
I could not use above message type/idoc type as they are not released in SAP.
So i am again back to where i have come from. I am trying to use DESADV01 and Mess Type DESADV.
Regards
Srikanth M

Too many recipients found for message type ORDERS in the ALE model

Hi all ,
please help me to solve this issue .
i done with ale settings .
orders message type is used in 2 different model view for 2 different systems
when i create po it is giving error in output "Too many recipients found for message type ORDERS in the ALE model"
how can i rectify this error.
Thanks

> orders message type is used in 2 different model view for 2 different systems
do both of them carter diffrent needs or is it the same idoc which is being sent to diffrent systems?
if yes, then use a single model view with noth receiver systems defined in it.
if not, i would suggest, copying the standard idoc and create a zidoc and then use different ones for diffrent receivers....
or u can use diff versions of the orders message type...
say orders05 for one.... receiver and orders02 for another one....
hope this helps!!
Cheers!!
Sidharth

Message type MBGMCR: posting of GR for a text po

Similar Messages

Maybe you are looking for