Messages menu status does not match Buddy List window

Using Messages in Yosemite, the status of my logged-in buddies listed in the menu bar does not match the status of my buddies in the Buddies window. I have buddies listed in the window that are not in the menu bar and vice versa.
It seems that the menu bar list may not be updating correctly--when I try to message them, the chat window sometimes says they are "idle"
MacBook Pro, 15", early 2011
10.10.1
Core i7
8GB ram
Buddies are using Messages as well as google talk.
Thanks!

Hi,
Sending Feedback to Apple rarely (if ever) gets a response. At iChat 3 release with OSX 10.4 there was an issue that I gave feedback for.
I also happened to mention the issue in the Lounge Area for "New Technical Issues" and the Host linked to the iChat forums there were back then contacted me about it and had me run some stuff for Engineering. (that's a possible once in 10 years like you).
iChat 5 in Snow Leopard
The process on how to display a particular Set of Buddies is different (as you will see with the next pic)
However I only see those "Available" in a full sense in the Menu Drop Down.
Idle (Amber) is technically Available + (a second level of Available if you like)
Yosemite/Messages 8+ (Mavericks is also listed as Messages 8)
The whole thing as I have several Accounts Logged in does fill my screen top to bottom.
These pics agree with your first paragraph.
I will let my MacBook Pro go Idle as it has one Account in iChat there that is not on my iMac and see if the Menu Drop down changes when it does.
I will have to wait for this to happen.
7:57 PM Wednesday; November 26, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Similar Messages

Error Message - Value Entered Does Not Match Format of Field

I keep getting an error message in Adobe Pro X: "The value entered does not match the format of the field [JF13]".
I have JF13 programmed as follows:
On Calculate tab:
if(Number(this.getField("ck4").value) > 0) this.getField("JF13").value = Number(this.getField("FL019").value); else this.getField("JF13").value = " ";
It is programmed this way so if the user checks the check box before the field, only then will JF13 populate a value, which pulls from FL019. I also have the settings set to "number" because the data needs to display as a dollar amount $xxx.xx.
FL019 is a hidden field on the form which pulls a dollar amount from a Mainframe, and its settings are also set to "Number" :
I get four pop up windows with the above mentioned error message, and the only way to make the message stop is to remove the "number" format from the fields. However, when this is done, if any number which ends in a zero is entered, it cuts off the zero. This is not acceptable either.
Is there some sort of script I could add or some other way to prevent both the error message and the cutting off of the zero on JF13?
I am not very proficient with javascript, so any assistance would be appreciated!

Thank you so much for your response!!
Forgive me for my lack of knowledge - but where exactly would I add that in the script?
I tried it like this:
if(Number(this.getField("ck4").value) > 0) this.getField("JF13").value = Number(this.getField("FL019").value); else this.getField("JF13").value = ""(empty string);
And I got an error saying I was missing a parenthesis. Should it go somewhere else or am I completely off?

CRM Sales Order Item Status Does Not match R/3 Item Status

The status of the CRM sales order item is being set to 'In Process' when the related R/3 sales order line item status is set to 'Complete' - when, the delivery quantity is zero for the sales order item. This happens when the warehouse can't find the stock to pick - the delivery quantity is set to zero. Thus, the CRM order item status does not agree with the R/3 order item status. We need for the line item status to be set to 'Complete' in CRM. Anyone have an idea as to how to make this happen?
Thanks you.

Hi Peter and Suresh,
From the information provided I understand that the sales order created in CRM after replication to R/3 has some status change.
1. What are the fields which are updated in R/3 for the sales order created in CRM ?
2. If sales order fields are updated in R/3 are these updates reflected back to CRM?
3. If they are reflected back in CRM? Is there still flexibility for sales order to be changed in CRM and replicated back to R/3?
Can you please share you experiences.. Any help is highly appreciated.
Thanks
Jothi

NEW_FORM call from menu module does not close previous form window

We run Forms 9.0.4 and I just developed three new form screens. The problem is that when new screens are called with NEW_FORM call from menu module:
New_Form(p_form_to_open,TO_SAVEPOINT,NO_QUERY_ONLY,NO_SHARE_LIBRARY_DATA,Menu_Globals.v_form_parml);
the window from previous form is visible in the background.
Strangely enough same call from the same menu module using exactly same NEW_FORM call for old screens does not leave previous window visible. I've checked Form level properties, Window Level Properties, Different Menu Properties, and could not find anything that would fix it.
Any pointer would be appreciated.

I've figured it out:
The old screens have main window named ROOT_WINDOW. As soon as I named the window on new screen to be ROOT_WINDOW the background window disappeared.
How stupid is that. Wasted my whole day on this.

Current database status does not match sitemap page

After I had to drop and recreate an 10g instance the OEM Home tab displays Status Pending. The instance, however, is available and all other OEM functions like Performance, Installation, and Maintenance work fine.
If I try to shutdown the instance the I get this message in the Startup/Shutdown:Confirmation screen :
Current Status open
This is the correct current database status, although it doesn't match the current status in the sitemap page.
Stopping and starting the instance through OEM did not change this condition.
How do you get OEM to update the status to what it knows it correct instead of what is stored in the sitemap page?

Ok, I did that many times already. The command is 'emctl stop dbconsole' and 'enctl start dbconcole'. OEM still thinks the instance is Pending.
Becasue of this and other problems with this instance I am going to cut my losses and uninstall 10.1 then reinstall 10.2 this weekend.
For example, I am now getting messages like this on Startup and the database will not Open:
ORA-04030: out of process memory when trying to allocate 41987820 bytes (pga
heap,KCL disk IO request block array)
If I allocate much LESS memory to SGA and PGA and then Startup the instance comes right up.
Thanks for you help.

Message 476 Routing does not match selection

Hi
I am just starting to try and learn some CO for material cost estimates. I am trying to get a planned cost estimate that shows a labor cost component and machine hours cost component. I think I am not seeing it because of this message.
Can anyone tell me just what this is for or guide me on what I need to do to get the cost compnents i wnt on my estimate.
Wayne

Hi
Hope this brief helps
Standard cost estimate is a tool for establishing prices for materials. It is used to calculate the costs of goods manufactured and the costs of goods sold for each product unit.
In order to establish the cost estimate with quantity structure of a material, the bills of materials and routing of the material must exists for the materials to be costed.
The cost estimate with quantity structure uses the material master data to determine the material consumption and internal activities required to produce the product.
Costing calculates the cost of goods manufactured for each material made in-house in the BOM structure.
Preliminary cost estimate is done in planning cost stage so as to know how much we need to produce the materials. This is as good as planned cost and once the production is finished, the Standard cost estimate is done periodically to update the finished material price in the materials master.
Whereas SAP provides in built facility of mixed costing by entering mixed ratio for production versions. In order to utilize this, REM backflush is to be done using data from the preliminary cost estimate of the production version. Postings will be done with the data available in the preliminary cost estimate but the material can have a standard cost estimate which will have a weighted average cost estimate depending upon the mixed ratio of the production version maintained for the material. Main advantage of using mixed costing is, it can valuate in-house manufactured inventory with precise costing and update stock values in balance sheet.
Reg
Suresh

Jdev 10g web services - Generated WSDL/message part name does not match

Hi,
Any idea how to get the generated WSDL sequence element name and Java WSDL mapping file message part name to match the parameter names of the EJB exposed as a web service (using the bottom-up approach)? Right now what happens is these 2 names are generated based on the parameter type (e.g. Integer_1, String_2, etc). Thanks for any help.
rgds,
Ong

It depends on a number of things because the JAXRPC 2.0 spec. will be dependent on a number of
other specs. We are hoping to have an EA later this year or early next year.

SUIM RSUSR010 does not return completed list of t-code.

All,
I have a problem using SUIM.
1. running for Transactions -> Executable fro role (RSUSR10)
The result does not match the list of S_TCODE of PFCG. I checked the OSS note and applied 1283691. After that, the result got worse as the result is even less than before.
My system is R/3 enterprinse SAP_BASIS SAPKB62065
If anyone find other useful note and fix the problem, please kindly provide me the right OSS notes.
Many thanks.

Hi Lillian,
the solution for the miracle shall be, that searching for transactions executable with role the result may differ from assigned t-code anhd S_TCODE-values.
RSUSR010 (S_BCE_68002041) lists only transactions, which really can be executed with that role. So not only S_TCODE is necessary, but also the prerequisites for execution (is the TX valid (TSTC), is it locked (SM01), additional authorizations necessary (SE93/TSTCA)) are checked. Especially the last point is oftne a trap. For instance for the t-code QA03 you'll need as per SE93-definition Q_TCODE with TCD = QA03 .
A simple countercheck is to create a test user, assign only that role , log on and try to start the assigned t-codes. If oyu fail, the result of rsusr010 is correct.
b.rgds, Bernhard
EDIT: sorry, my mistake: it is not checked, if the t-code is locked in SM01....
Edited by: Bernhard Hochreiter on Sep 22, 2010 10:54 AM

Certificate does not match a unique certificate on this host for the issuer

Hey everyone!
I've been working with a strange issue on my persistent chat pool. I added a pool to my current deployment, all of which went without issue, until I tried to connect to one of my chat rooms, where I was met with the infamous "Your chat room access may
be limited due to an outage". The logs were filled with the following error
"The persistent chat server can not establish or maintain MTLS connection to the Lync Server
Reason String: RemoteDisconnected"
When I went to renew the internal cert, I get the message:
WARNING: "4f000000139c71d470b9a56af1000000000013" does not match a unique certificate on this host for issuer "CN=hosting-EXAD2-CA-1, DC=hosting, DC=email".The following certificate was assigned for the type "Default":Default:
E1864894FD306300A16F301AA21446CF45F7ABD3 EXPCPOOL.hosting.email 02/16/2017 CN=hosting-EXAD2-CA-1, DC=hosting, DC=email 4F000000161F1E51F1F5EB8C57000000000016ImageWARNING: "Set-CSCertificate" processing has completed with warnings. "1" warnings
were recorded during this run.ImageWARNING: Detailed results can be found at "C:\Users\administrator.HOSTING\AppData\Local\Temp\1\Set-CSCertificate-[2015_02_17][08_29_57].html".
Any thoughts on this?

Hi,
Check this old thread
https://social.technet.microsoft.com/forums/lync/en-US/3d569519-8a43-4cd2-b322-718ee575e140/lync-frontend-certificates-vanish
https://guybachar.wordpress.com/2014/04/16/certificate-requirements-for-lync-2013-enterprise-persistent-chat-server/
Whenever you see a helpful reply, click on Vote As Helpful & click on Mark As Answer if a post answers your question.

Trying to "Edge" up, and it tells me "This device does not match the device ID on your original Edge Agreement."

I'm on the Edge program with the iPhone 5s, and my original contract states that after half of the phone is paid off I can "edge" up. It's half paid off, but when I try to upgrade (to iPhone 6+), I get this message: "This device does not match the device ID on your original Edge Agreement.Please activate the original device". This is the original device. I've never had a replacement, and I originally purchased this phone (the 5s) and a verizon corporate store. Help?

Kphilbrick9,
That's very strange to hear! I've seen similar error messages in the past when a device was replaced or swapped out for some reason. Has your iPhone 5s been replaced or swapped since you originally got it via an Edge Agreement?
SarahO_VZW
Follow us on Twitter @VZWSupport

Music files from zune (pc) does not match info whe...

why is it that in the zune software the music artists does not match the lists from my collection (pc) to the contents in the phone, this is getting frustrating.
in my computer there are a total of 264 artist and over 400+ songs. but checking the phone 52 artists only appear, though the songs are there but all the others excluded from the 52 artists are classified as unknown.
i have manually edited it from my computer and from zune as well. so its impossible to have missed labeling the artist etc etc. any help here?

Whaaaaaat...???????
It is not compatible? How do i transfer my music, pictures, videos.??? Cant beleive it..!!
HELP HELP

Ocs package does not match the current software components

Hi Experts,
In our SAP ERP 6.0 system few components like SAP APPL,EA APPL ,FinBasis were already upgraded to 603 SP04 long time back.
Now to install language,we need to upgrade all the components to EHP3.The pre requisite to upgrade to EHP3 as per note number 1095233 is SP08.Few of our components are at SP06 level and i downloaded the supported packages of all the components to upgrade to SP08 and then upgrade to EHP3.
When i try to display/define the component ECC-DIMp,i get the eror message message" ocs package does not match the current software componentu201D when trying to apply ECC-DIMPu201D .When i looked at the queue,the SPAM is looking for prerequisites of components EA APPL 600 and SAP APPL 600(This components are already upgraded to 603 level).
Please suggest me the option.
Thanks
satish

Hi,
For your problem, please check SAP note 1083533, please check extract from this note:
If you cannot integrate the required component Support Packages because the import conditions are not met (for example, because you have already installed SAP_APPL 603 although SAP_APPL 600 is the prerequisite), you must update the import conditions. When you try to install EHP3 packages using the EHP installer (EHPI), the following error occurs in SPDA_EHP_INCLUSION.LOG: "OCS package SAPKxxx does not match the current software component vector" Ths system displays the same error message when you try to install packages using transaction SAINT. Proceed as described in Note 1118803.
Solution is documented in the SAP note 1118803.
Thanks
Sunny

Reader version listed in GUI does not match that of executable file (again)

I posted regarding this issue before (http://forums.adobe.com/message/4817948), but was never able to find an answer.
Presently I am deploying Adobe Reader 10.1.5 via the MSI installer and group policy. The issue is that a user shut down her Windows 7 computer midway though the MSI installation interrupting (i.e. screwing up) the installation process. I had to delete a few registry entries and reboot the user's PC in order to re-initiate the Reader installation (something I've done in the past).
To verify that Reader was installed sucessfully, I browse to the Reader executable (AcroRd32.exe) in Program Files, double click the executable, select About Adobe from the Help menu, check the version number in the information box and see that the version number is 10.1.4 (i.e. the old version that I am upgrading from). However, when I browse to the Reader executable (AcroRd32.exe) in Program Files and and open the file properties, I see that the version is 10.1.5 (i.e. the new version that I am upgrading to).
So the Reader version listed in GUI does not match that shown in the executable property box.
This is the second time that this has happened with a Windows 7 PC. I've never experienced this sort of thing with a Windows XP PC.
Why is the version number different in the GUI? Where is the version number read in from for the GUI? The registry? Can anybody shed some light on this situation?

Let me clarify that the tool posted on http://labs.adobe.com/downloads/acrobatcleaner.html is not the uninstaller for Reader. Instead it is a cleaner tool used for any botched up installation as mentioned above. This utility should only be used in rare circumstances. Instead reader has its own uninstaller which can be used through ARP (Add Remove Programs) in Windows or you can also use the command line "msiexec /x AcroRead.msi" to uninstall Reader.
Thanks,
Vinod

Message no. F5350 account type/account for invoice reference does not match

Hi SD Experts
Getting error message when the Billing document is released to accounting.
"Message no. F5350 account type/account for invoice reference does not match item"
Client is having 6.0 version , I have checked OSS notes, only available for upto 4.7 version.
Please help to solve this issue.
Thanks/karthik

have you checked which account type is maintained in respective G/L account which supposed to be hit once invoice is released . eg: check in Reconcilation account assigned in Customer Master in FS00, Reconcillation account for accoun type should be - D= Customers.
similarly for other accounts such as "Revenue account" & check Field status group assigned in G/L account in FS00.
Check & revert

Item does not match schdule line ( program error ) message no . V1427

*Item does not match schdule line ( program error ) message no . V1427 .* This is the message I am getting when I am trying to display a quotation through VA23 . From here system exits the transaction .
As per my observation , when I compared VBAP and VBEP tables, there are 2 items in VBEP table with schedule lines but the same items are not present in VBAP table. User says he tried to delete these items because there is no quanity , Inspite of that these items appear in VBEP table .
The document is a reservation document where in schedule line category does TOR and availability check.
I checked various related notes - 442831 , 401463 , 389687 etc . These are quite old notes and I am in release ECC 5.0 .
What is the best way as this doc has nearly 30 items and nearly all of them have quanity confirmed .
Please provide your valuble inputs ...
Regards
Raghav..

Nitin,
Below are the steps to check
Transaction SE18
Definition name: BADI_SD_SALES
Menu: Implementation -> Overview
double-click on implementation: IM_CORE_CHECK
Now you will get an overview on the methods.
check whether implementation IM_CORE_CHECK is active or not.
If not Press the change button and activate
looking at the your system pack level this should be active. If it is active then the inconsistency must be modified directly at database level through Z report.
Ramesh

Messages menu status does not match Buddy List window

Similar Messages

Maybe you are looking for