Messages won't always send since update

since this iO7 update my messages are randomly unable to send.  even with wi-fi and a good signal, they just keep trying to send without sucess.  sometimes, however they work fine.  any suggestions?

Lots of people are experiencing this issue over the last several days:
A phone reset or going to Settings > General > Reset > Reset Network Settings resolves the issue.
Let Apple know about the issue here:  http://www.apple.com/feedback

Similar Messages

  • My canon p-150m scanner gives the error message "cannot load drivers" ever since updating to yosemite

    why does my canon p-150m scanner gives the error message "cannot load drivers" ever since updating to Yosemite ? I have had 2 reload the driver 2x - but each new time I start I keep getting the same error message .

    Try resetting the printing system.
    OS X Mavericks: Reset the printing system

  • IMessage cc's to sender since updating to iOS 6.1

    Since updating to iOS 6.1 every time I send an iMessage it gets delivered to the intended recipient, but a copy also comes back to me. I have checked every setting I can think of and nothing is turned on to copy messages to myself. This does not happen when I send a SMS text message. I have tried resetting the phone. I created a back-up in iTunes and did a factory restore and the problem persists.
    Very frustrating

    Tell whoever is using your Apple ID for iMessage to uncheck your number in Settings > Messages > Send & Received

  • I am having multiple problems with my iphone 4s, people can't hear me when I call, text messages don't always send, calls go straight to voice mail. I have all bars, have hard rest 3 times. I have called apple 4 times and gone to a store. No help.

    I have had the 3g, 3gs, 4 and little if any problems. I made a major mistake buying the 4s. What a horrible phone. I must say, apple service is at best, BAD. Here are the basics. I am on the same network, I call the same people, I use the same text messages as I did with the 4. With the 4s, I will call someone and they will not be able to hear me. I have to hang up and recall. Or the phone just does nothing when I press call. Text messages acts like they send but when I go back the have been sent. Sometimes the calls go direct to voice mail.
    Here's what I have done. Reset, did not help. Called apple, advisor said she would call me back in 5 minutes, after waiting for 5 days for the call, I recalled, they walked me through the same things I had already done, then said to take it to a store. So they set up an appointment for the only day I could get to it, 1 1/2 hours away, on my grand son's birthday. That was okay if they fixed it. So they hard reset it, we had to setup 4 email accounts, they would not allow me to restore because they said it was a software problem. So I had to download all the apps, lost a lot of data. No fun. But if it worked! So Monday back at work, guess what, same thing. When home and did another hard reset. Still no lick. Called apple again. They said they would replace my phone, all they needed was to put a hold on a credit card for $899 or drive a 1 1/2 hours to a store.
    So anyone know a good andriod phone.
    PS I got a email asking about the service each time and each time I told them what a horrible phone it was and how bad service was. I have yet to hear back. I guess they do not read them!

    You're not speaking to Apple on in this forum, nor will someone from Apple see this post.   We are just users like you and I.
    Have you tried to restore or reset your phone?
    Or contact your carrier in re: to your sim card

  • Apple configurater won't restore backup since updating to version 1.2

    Since updating Apple Configurator to version 1.2, I am unable to restore from a backup. I have supervised iPad 2s. Set one up the way we want and backup. Connect another supervised iPad 2 and try to restore. Fails everytime. If I restore from a backup pulled when I had the old version, everything works fine. It seems as if the backup is corrupt or something. I emailed support but the person who answered the email must work in the middle of the night. One question a day. At this rate, they will help in about a month.

    - Try moving the existing backup to a safe location and then try again. The backup is here:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    - To transfer iTunes purchases to your computer:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    - To transfer-non-Tunes music to your computer use one of the third-party programs discussed here:
    Best iPod to PC

  • E-mail won't send since updating software

    Since I updated the software on my iPhone yesterday (don't think it's a coincidence!) I can't send e-mails on my iPhone from my AOL account, although I've never had problems before. The message I get is "Cannot send mail - the sender address was invalid" I can receive e-mails ok.
    Does anybody have any suggestions please?

    You're welcome.
    The error message provided is not accurate. This usually means the internet service provider (ISP) being used for your internet connection at the time is blocking the SMTP server. Most, if not all ISPs block the use of SMTP servers that are outside of their network or not provided by the ISP being used for your internet connection at the time unless the SMTP server is authenticated. A cellular carrier's network is no exception.
    I believe AOL has an authenticated SMTP server, so this shouldn't be a problem especially if it was working before unless something has changed recently in this regard which coincided with the firmware update. My email account (non-AOL account) has an authenticated SMTP, and I haven't experienced any problems sending with the account since installing the recent firmware update.
    Are you also accessing your AOL account with an email client on your computer such as with Outlook or with Windows Mail? If so, any problems sending with the account with the email client used on your computer for accessing the account? Accessing/sending with the account via webmail access using a browser doesn't count since doing so does not use an SMTP server.
    Just wondering if AOL is having a problem with their SMTP server.

  • TS2755 I cannot text or send photo message to non iphone users since update.

    Since the update to ios7.0, I haven't been able to send text or photo messages to contacts that don't have an iphone. Is it an iphone problem or does it have something to do with my carrier (VERIZON).

    In settings/ messages do you have mms and send as SMS if iMessage is unavailable turned on

  • Imessages won't send since updating to iOS 6.

    The problem started out quite sporadically and now it is completely unable to send messages.  Yesterday, 9/26 imessages started out fine then later in the afternoon I started getting not delivered messages on my Ipad.  Imessages on my Iphone 4S works fine so far.  Both devices were updated to the iOS6.0 system.  Has anyone else experienced this bug and is there a fix out there anywhere?

    I have an iPhone4 and upgraded to iOS 7.1. 
    Since then imessage does not work properly on the iPhone4. 
    iMessage is working on my iPad normally.
    I have reset network settings after turning iMessage off.
    Turned iMessage back on.
    iMessage is activiating and after doing the above.
    I have also turned the phone off (Held home and power buttons for 10 seconds etc)
    Other devices cannot reach the phone using iMessage.
    My local Brisbane Apple store said last Friday evening it was most likely not the device and there was a problem in the 'cloud' side of iMessage out of my control.
    This does not seem to be the case as I search for the thousands of people this would most likely affect.
    I had a brief period where it appeared to work normally a few days ago.
    Inerestingly when addressing a message in the 'To:' screen iMessage capable names come up blue as if they are about to be addressed and sent as an imessage.  Once selecting the name however it turns green as if to say this will be sent as a text.
    I am at a loss at what to do.  The phone was working perfectly well under iOS6x
    Thanks

  • Safari won't even start since update to 3.2

    I am having the same problem as lots of others I am reading about here. Since I upgraded to 3.2, Safari won't open at all. Just gives me the message that Safari "unexpectedly quit" before it even opens. I have been reading the posts and have tried deleting all the plugins (although I didn't seem to have the ones that were causing others trouble) I deleted all except bookmark.plist in user/library/safari. I even called Apple. She had me delete Quicktime, clear Cache, clear cookies. Nothing worked. She wants me to Archive & Install. Last time I did that I had a very bad experience (and it turned out it wasn't really necessary, anyway) so I am avoiding that.
    So for now I am just using Firefox and hoping that someone will come up with an answer that will work for me.
    Thanks

    She had me delete Quicktime
    An Apple employee told you that? You should never do that. Quicktime is a fully integrated part of the operating system and should not be deleted.
    Rather than attempt a reinstall of bits and pieces I would also recommend an Archive and Install.
    How to Archive & Install:
    http://docs.info.apple.com/article.html?artnum=107120
    This document explains how to correctly reinstall a prior version of Mac OS X in the event that other troubleshooting does not resolve an issue:
    http://docs.info.apple.com/article.html?artnum=25404
    BUT: Don't install older versions of Mac OS than what comes with your computer:
    http://docs.info.apple.com/article.html?artnum=25497
    Once your operating system is functioning properly again you, and you have installed all security and Quicktime updates relevant to your system, this might help:
    If your Safari keeps crashing, or if you are updating Safari (or just have):
    N.B. Never delete Safari, never run it under Rosetta, don't use proxy settings.
    (If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Safari 3.2 for download can be found here:
    http://www.apple.com/safari/download/
    Make sure you download the correct version for your system.
    Also, observe the standard procedure for installing software: repair permissions and close all applications, install, then repair permissions again.)
    Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta and which was updated to v.3.1.2, and now both Tiger and Leopard uses Safari 3.2. If Safari 3.2 is not the fastest browser you have ever used, then something is wrong!
    (Trying to revert to a previous version of Safari can have repercussions, as Safari 3.x uses a completely different webkit on which other applications like iChat, Mail, Dashboard Widgets etc also rely, but if you really want to do this post back for instructions on the safe way to do so.)
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-ons that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet. If you have them, trash them and go the developer's sites to see if new versions are available for Safari 3.2.
    You should also ensure that you have downloaded and installed the correct version for your Mac of Security Updates up to 2008-007, which is required for Safari 3.2. Like all security updates, these require a restart and a permission repair. Note that 2008-007 is a combo update: if you have missed a couple of updates this one will suffice.
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • Hard Disk/Library/InputManagers
    • Home/Library/InputManagers
    especially prior to system updates and updates to Safari (they can always be added back one-by-one later).

  • Ipod won't go dark since update

    Ever since I installed all the updates and installed Itunes 7 my Ipod stays lit all the time flashing do not disconnect. It is plugged into my comp with USB. Before it would flash the same message but would go dark. I have tried restarting the ipod and also restoring the ipod. No luck so far. Am I the only one having this problem?
    Jason

    Guys, think this is normal and a "new feature" added to the new iPod Updater and iTunes 7, as long as your iPod is connected to iTunes with the "Do Not Disconnect" message on screen, the screen will first light up all so brightly but will go into a dimmer screen, but still lit.
    Cheers

  • Text messages don't always send; I get a red flag message. How can I make them re-send automatically?

    This drives me nuts: Occassionally, but not often, I will send a text message and it does not go through. This happens both when I am using iMessage or regular text messages. It gets me into a lot of trouble: I assume my text message has gone through, then check my phone half an hour later and realize the message has not been sent. I don't even get a vibration or a notice that it hasn't sent; it's only when I check my messages that I see the red flag but my undelivered message.
    How can I get the iPhone to just automatically keep trying to re-send these messages until it goes through, or at the very least to give me a notification buzz when the message doesn't go through so I know to manually re-send it myself?

    At this time that option does not exist. The only workaround that I can think of is to watch and make sure the text sends before closing the app.
    You may send feedback to Apple asking for a feature using this link www.apple.com/feedback/iphone.html

  • IPod mini won't play songs since update

    Recently, I had trouble using the Apple online music store, and couldn't preview any of the tracks on the CD I wanted to purchase. So... I finally downloaded the new iTunes software and bought four songs. The songs appear in my library, and show up on my mini, but when my "Shuffle Songs" gets around to them, they don't play. The title and artist pop up as if it's going to play, but it just skips over to the next song. The songs play perfectly fine from my laptop on iTunes, just not on my mini. And all my old songs are fine, just not the new ones I got after the iTunes update. Anyone have a similar problem??

    I have the exact same problem. It just started doing this yesterday out of nowhere. I have been reading the postings and it looks as if heaps of people are having this problem. Do you know if Apple is doing anything to address this issue? I was thinking about trading this one in for a 20 GB iPod since they aren't even going to be making the mini's anymore.

  • Messages won't open after software update

    I just updated my Macbook Pro today. It was a Thunderbolt Firmware Update 1.2 and OS X Yosemite Update 10.10.2. After my Macbook restarted, popups appeared saying Mail and Messages could not be opened because of "a problem." The popup for Messages says "Check with the developer to make sure Messages works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X."
    I reopened the App Store and I noticed the same update I just completed was there again under Updates Available. I updated my Macbook a second time. Same issue. I see the same Update Available for Yosemite and Thunderbolt Firmware again. Anyone having the same issues? Thanks.

    Try re-indexing Spotlight.
    Spotlight – Re-index
    Hide Update in Mavericks
    For Mail and Messages.
    Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one. 
    Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
    Isolating an issue by using another user account
    Try booting into the Safe Mode using your normal account.  Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
    Safe Mode - About
    Safe Mode - Yosemite

  • My iPhone 4s with iOS 6 won't sync properly since updating my Mac to OSX 10.9?

    Hi. I've kept my iPhone 4s using iOS 6, but I upgraded my iMac to OSX 10.9 yesterday and now it's not syncing properly. Can anyone help? Previously in iTunes I'm sure there was a radial button to sync calendars & contacts etc, but I can't see it now.

    Hi blu72,
    Thanks for using Apple Support Communities.  With OS X Mavericks, you can sync your contacts and calendars with your devices using iCloud:
    iTunes 11 for Mac: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12117
    If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud. For more information, see iCloud Help at icloud.com.
    Take care,
    - Ari

  • Inbox messages won't always display

    I am having trouble with my inbox that hopefully someone can help with.
    Backround Info:
    System 10.3.9 on a G4 mac mini
    Mail 1.3.11
    I have several accounts set up, personal ones on one server and a work account on a different server.
    I recently imported my work account with all folders from Quickmail using emailchemy. I have been using Mail for the other accounts for several months.
    My problem:
    When I open mail, I can see my office account inbox messages. If I switch to any other folder, either a different inbox or a stored mail folder, to view a message and then go back to the office inbox I get the following for my already downloaded mail instead of the mail message.
    The message from "*" <*@server.com> concerning “subject” has not been downloaded from the server. You need to take this account online in order to download it.
    The account is online continuously. If I quit mail and reopen it, I can again read the inbox messages. This problem is only occuring in the office account with the inbox and not in the personal accounts or any stored mail folders.
    All thoughts and ideas are welcome.
    Thanks.
    Intel 2.33Mhz 20" iMac   Mac OS X (10.4.8)  

    This error message indicates an "overstuffed" mailbox issue which means the mailbox has approached or exceeded the recommended size limit or the mailbox has some corruption.
    All email clients have limits and the recommended mailbox size limit for Jaguar and Panther Mail is 1 GB and for Tiger Mail, 2 GB.
    An "overstuffed" mailbox issue can occur at any mailbox size but is more likely to occur depending on the number and size of message attachments contained in a mailbox and especially as a mailbox approaches or exceeds 1 GB in size.
    This problem is more common with Jaguar and Panther Mail and has all but been eliminated with Tiger Mail which uses a significantly difference mbox format than previous Mail.app versions.
    On to resolving your problem.
    With the Mail.app quit and using the Finder go to Home > Library > Mail > this POP account named folder (named by the user name and incoming mail server for the account) > INBOX.mbox.
    Move the INBOX.mbox to the Desktop.
    Launch Mail and a new INBOX.mbox will be created automatically by Mail within the account named folder. This will allow the Mail.app to function properly again while working on the old INBOX.mbox moved to the Desktop to recover the existing messages.
    Control-click on the old INBOX.mbox moved to the Desktop and at the menu window that appears, select Show Package Contents.
    Post back here listing the package content file names and size of each. I need this information to determine the next steps to take to recover the messages.

Maybe you are looking for

  • Get Folder details(CV01N) based on material.

    Hi Friends, I have created a document(CV01N) and linked the material via program. I need to add the same material in root folder which is in Document browser tab. I'll get the corresponding material number range and add it. How to get the folder base

  • My catalog is suddenly blank?  It's still listed, I can still open it, but there's nothing in it.

    I had lots of trouble getting my old Album catalog to convert to Photoshop elements 8, so I eventually circumvented the problem by simply re-creating my catalog from scratch.  Unfortunately took a fair bit of time, without giving the details.  I've b

  • My Experience (Not so Good)

    I have been an AT&T iPhone customer since the original 3G. My boss would call me all the time and eventually he agreed that if I buy a Verizon Iphone, he would cover the bill. I got the Verizon Iphone several months ago, and just recently went to por

  • "URL Malformed Exception" in j2ee

    I've just tried to run the j2ee by first time in Linux, but I only got the next error "URL Malformed Exception" after it opened de port. I've alredy installed de JSDK and set enviroment variables JAVA_HOME and J2EE_HOME. Is there something I'm missin

  • How to open the URL in a new window

    Hi, i have created a web template with hyperlinks in it. when i click the link in the browser it opens it in the same window. how can i open the link in a new browser. we are in BW 3.5 Thanks Krishna