Messaging Server and mix of local and remote server mailboxes?

Admittedly I am a messaging server noob. Sun came in and installed our Sun JES Server for us.
That server is our LDAP, mail, and IM server.
We would like to start using gmail for domains for some of our users, but not all of them.
We use Postini for spam filtering. Right now if someone from the Internet sends an email to our domain, the mail is filtered by postini and then proceeds onward to our mail server and then local delivery to the correct mailbox.
With Postini we believe we can set it so after filtering, some email accounts can proceed to our server while others proceed onto the gmail servers.
The problem I foresee though is when sending mail internally. When we send email in house, email doesn't go through Postini and just gets delivered locally.
Is there a way in the messaging server to make it so some address continue to be delivered locally while others continue on to a remote server (i.e. either to Postini or gmail servers directly) ?

slo_chewie wrote:
Does the email recipient address change when the email is sent to gmail i.e. does an email sent to [email protected] become [email protected]?
We've got google for domains setup, so users would retain a @domain.com address regardless if there mailbox was hosted on the internal server or hosted at google.You can make use of the mailRoutingAddress: user attribute and source routing to get the desired behaviour e.g.
=> Set the following value to the LDAP entry of the user who is hosted on the gmail server. The "[email protected]" address should match the users mail: address:
mailRoutingAddress: @gmail.com:[email protected]=> Ensure the following option has been tcp_local channel in your imta.cnf file. This option strips off the "@gmail.com" value of the recipient address before sending the email to the gmail.com servers.
dequeue_removerouteMake sure you run "./imsimta cnbuild;./imsimta restart" after modifying the imta.cnf file.
Regards,
Shane.

Similar Messages

Do i need a network card to install and run a local java web server

Friends,
Do i need a network card in my computer to install and run a local Java Web Server or any Web Server.

network cards are only for connecting equipment together... you can set up a webserver without any more equipment than you have already! Indeed Tomcat... BUT you would be better off with apache for production stuff. It depends what you need to serve... if its mainly static pages (i guess it probably isn't) then apache will be enough by itself; but if you need to serve dynamic pages (JSP, Servlet blah blah) then you will need tomcat. Tomcat has it's own webserver and its perfectly ok for testing or low-load stuff, but you can integrate with Apache (a moderately compex task, but do-able, see tomcat-user forum off of apache site) for greater stability, and you don't have to show the port in the URL... Don't set up a webserver on any pc that contains stuff you don't want hacked into... it becomes very succeptible when the service is up...

Info please...control surface and mixer for fcp and audio recording

i'm looking for a control surface for final cut pro and also xlr/line inputs for recording guitar and vocals in cubase or audacity.
read all the info here after numerous searches. still some questions.
was looking at the tascam 1082 but not sure of the build quality...i saw one and it looked a bit cheaply built. the two demos at guitar center were falling apart. didn't look nearly as well built as the mackie. also i have been reading here and elsewhere about bugs/problems etc.
was looking at the m-audio...not sure about that one...$1250...
was also looking at mackie control surface...but no firewire...how do you hook it up to a mac? also no audio inputs. what would i need to buy to work in conjunction with that for recording audio? if i bought the mackie, i'd still have to buy an audio inpur device and that would end up costing as much as the m audio.
i know i could just buy a mixer for recording and forget the control surface...i already have a shuttle pro which works fine and i have gotten used to using the mixer in fcp...no problems. but the motorized faders on a control surface sure would be nice
so questions:
how does the mackie connect to a mac and what other device(s) would i need to record audio and how would they hook up...would they play nice together?
ppl who own the tascam...happy with it? used the mic and line preamps? are they noisy?
do i need an additional firewire bus reguardless of which control surface i get?
how does one route the audio for these when in fcp? i currently route my audio through my dsr 11 deck. will the control surface just go through firewire or would i have to actually jack into the control surface with additional cables and have to remove my present cables from my speakers everytime i want to use the control surface?
sorry so many questions. it's really tough to make an informed decision in buying something if you don't understand the mechanics of it.
btw, appreciate the info so far that i found doing my searches.
thanks
carl

I've got the Tascam FW1082 and I absolutely love it. I can't believe I ever edited without it. I'm considering upgrading to the 1884 in the future.
As for the mic preamps, they sound great. Nice and clean. There's no such thing as a line preamp, but the line inputs are clean as well.
For routing, I go to the 1082 via firewire until I turn on my external video monitor, at which point I send both video & audio to the deck and route the audio from the deck into a pair of the mixer's analog inputs. That way you avoid the delay of external monitoring. The 1082 allows you to listen to both the computer & the inputs at the same time, so switching back and forth is seamless.
As for durability, I've had it out on a few location recordings, but most of the time it's on my desk. It's still in mint condition. I'm sure if it was on a display where any 10 year old could come mess with it, it wouldn't be in as great of shape, but then again, a Neve console wouldn't look that great if every little brat that walked in the door could play with it. If you take care of your stuff, you'll have no issues with this mixer.

How do I uninstall "EmieSiteList" and "EmieUserList" in Local and LocalLow? (SIMPLE TERMS PLZ)

Hi, I found that my computer has been running really slow and I keep getting these popups. It wont let me delete emiesitelist as it says I am not the administrator, when I am. Can you please help me? I am not a geek so simple steps would be great and I
will follow. Thanks so much

Hi,
I agree with Chris Love, please give us more details about the pop up message or a snapshot.
Meanwhile, you can refer to the following link to troubleshooting some slow or no responding issue in IE 11
http://support.microsoft.com/kb/2991509
http://msdn.microsoft.com/en-us/library/dn338138.aspx
Regarding to the EmieSiteList" and "EmieUserList" , this link might be useful for understanding
https://social.technet.microsoft.com/Forums/ie/en-US/9b080135-dd7c-458a-93bb-e62b3fdbdd07/emiesitelist-and-emieuserlist-hidden-directories-and-datfiles?forum=ieitprocurrentver
Yolanda Zhu
TechNet Community Support

ID and passwords not accepted by remote server

IDs and passwords for various site - mainly banks - seem not to be transmitted/recognised. The remote site screen returns to its original state before the data was entered with no explanation of why it didn't respond. I can successfully enter these site via IE. I can also enter via Firefox on my laptop.

Hi Bay,
Would you please tell us that when you try to change password, have you typed the new password twice?
The error message indicates that there could be some mistype of the new password.
If this is a Domain Controller and you have multiple DCs, please try to reset the password on another DC to see if it works.
Best Regards,
Amy Wang

Lion Server VPN, Can Connect Locally, Not Remotely

I have both Lion and Lion Server installed on my Core 2 Duo iMac, mainly because I want the VPN feature of Server.
I configured everything correctly for the VPN, and can connect to it with no problems from my iPhone and iPad when I am within my own LAN (the server and the iPhone/iPad are on the same IP range and subnet).
I also used the automatic config within the Server app to configure my AirPort Extreme N Base Station. Looking at the Port Mapping section of my ABS from within AirPort Utility, I do in fact see that VPN Service (L2TP) is configured with the following UDP ports: 500, 1701 and 4500. Those ports ARE pointing to the iMac that is running the VPN server. Firewall on that iMac is turned OFF.
However, I am unable to connect my iPhone to the VPN Server using my Public IP address. I have tried it from within my network (out of network to internet the back), from my Verizon MiFi or from my iPhone's 3G connection (well, in my area it is still Edge). The iPhone simply sits on "Connecting" for a few seconds, then an alert comes up stating "The L2TP-VPN server did not respond. Try reconnecting. If the problem..." yadada.
I AM, however, able to get Web Sharing to work via my Public IP address, as well as VNC.
I also cannot connect to the VPN via the Public IP with other devices like my iBook, PowerBook G4, Windows 7 PC, or iMac G5. They ALL CAN connect via the local network 10.1.x.x IP address.
Am I missing something here? I did all of the automatic configurations, and all of the ports appear to be properly open.

Not in my case, Per, no.
I just did a tcpdump between various systems.
For those that do NOT work (client iPhone, client 10.7 and server 10.7) the tcpdumps look like so:
19:12:33.883057 IP Home.60845 > LionServer.500: isakmp: phase 1 I ident
19:12:33.884410 IP LionServer.500 > Home.60845: isakmp: phase 1 R ident
19:12:33.910379 IP Home.60845 > LionServer.500: isakmp: phase 1 I ident
19:12:33.918362 IP LionServer.500 > Home.60845: isakmp: phase 1 R ident
19:12:33.958995 IP Home.60846 > LionServer.4500: NONESP-encap: isakmp: phase 1 I ident[E]
19:12:33.959349 IP LionServer.4500 > Home.60846: NONESP-encap: isakmp: phase 1 R ident[E]
19:12:33.959461 IP LionServer.4500 > Home.60846: NONESP-encap: isakmp: phase 2/others R inf[E]
19:12:34.997414 IP Home.60846 > LionServer.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E]
19:12:34.998323 IP LionServer.4500 > Home.60846: NONESP-encap: isakmp: phase 2/others R oakley-quick[E]
19:12:35.016983 IP Home.60846 > LionServer.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E]
19:12:35.019173 IP Home.60846 > LionServer.4500: UDP-encap: ESP(spi=0x041b007d,seq=0x1), length 132
19:12:35.052641 IP LionServer.500 > Home.500: isakmp: phase 1 I ident
19:12:35.595022 IP Home.60846 > LionServer.4500: UDP-encap: ESP(spi=0x041b007d,seq=0x2), length 132
19:12:37.597957 IP Home.60846 > LionServer.4500: UDP-encap: ESP(spi=0x041b007d,seq=0x3), length 132
19:12:38.212127 IP LionServer.500 > Home.500: isakmp: phase 1 I ident
19:12:41.214447 IP LionServer.500 > Home.500: isakmp: phase 1 I ident
19:12:41.603061 IP Home.60846 > LionServer.4500: UDP-encap: ESP(spi=0x041b007d,seq=0x4), length 132
19:12:44.216935 IP LionServer.500 > Home.500: isakmp: phase 1 I ident
19:12:45.609900 IP Home.60846 > LionServer.4500: UDP-encap: ESP(spi=0x041b007d,seq=0x5), length 132
19:12:49.616860 IP Home.60846 > LionServer.4500: UDP-encap: ESP(spi=0x041b007d,seq=0x6), length 132
19:12:53.623054 IP Home.60846 > LionServer.4500: UDP-encap: ESP(spi=0x041b007d,seq=0x7), length 132
19:12:54.965357 IP Home.60846 > LionServer.4500: isakmp-nat-keep-alive
19:12:55.032098 IP Home.60846 > LionServer.4500: NONESP-encap: isakmp: phase 2/others I inf[E]
19:12:55.036420 IP Home.60846 > LionServer.4500: NONESP-encap: isakmp: phase 2/others I inf[E]
19:12:56.228356 IP LionServer.500 > Home.500: isakmp: phase 1 I ident
Note: I've done this over wired and wireless as well as 3G -- the transport on the client end is NOT the issue.
A connection that works, from iPhone ONLY (on 3G or Wireless) is:
11:24:59.960105 IP Home.61168 > LeopardServer.500: isakmp: phase 1 I ident
11:24:59.964119 IP LeopardServer.500 > Home.61168: isakmp: phase 1 R ident
11:25:00.673976 IP Home.61168 > LeopardServer.500: isakmp: phase 1 I ident
11:25:00.712858 IP LeopardServer.500 > Home.61168: isakmp: phase 1 R ident
11:25:01.466127 IP Home.61169 > LeopardServer.4500: NONESP-encap: isakmp: phase 1 I ident[E]
11:25:01.468180 IP LeopardServer.4500 > Home.61169: NONESP-encap: isakmp: phase 1 R ident[E]
11:25:01.468546 IP LeopardServer.4500 > Home.61169: NONESP-encap: isakmp: phase 2/others R inf[E]
11:25:02.954797 IP Home.61169 > LeopardServer.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E]
11:25:02.978314 IP LeopardServer.4500 > Home.61169: NONESP-encap: isakmp: phase 2/others R oakley-quick[E]
11:25:03.480886 IP Home.61169 > LeopardServer.4500: NONESP-encap: isakmp: phase 2/others I oakley-quick[E]
11:25:03.486763 IP Home.61169 > LeopardServer.4500: UDP-encap: ESP(spi=0x0a46a01f,seq=0x1), length 116
11:25:04.032382 IP Home.61169 > LeopardServer.4500: UDP-encap: ESP(spi=0x0a46a01f,seq=0x2), length 116
11:25:06.029801 IP Home.61169 > LeopardServer.4500: UDP-encap: ESP(spi=0x0a46a01f,seq=0x3), length 116
11:25:06.517111 IP LeopardServer.4500 > Home.61169: UDP-encap: ESP(spi=0x088d7e27,seq=0x1), length 116
11:25:06.742918 IP LeopardServer.4500 > Home.61169: UDP-encap: ESP(spi=0x088d7e27,seq=0x2), length 116
And from there it's all normal.
What never works:
10.7 client to 10.7 server
iPhone to 10.7 server
The breakage seems to happen on 10.7 server here:
19:12:35.019173 IP Home.60846 > LionServer.4500: UDP-encap: ESP(spi=0x041b007d,seq=0x1), length 132
19:12:35.052641 IP LionServer.500 > Home.500: isakmp: phase 1 I ident
After that first ESP packet, the Lion Server responds with another phase 1 ident.
The Leopard server does not.
It may still be something in my setup, but, there's nothing to configure on 10.7 server other than "on" and "off" and some IP addresses, which I'm nearly certain isn't the issue...but who knows. Either the Lion Server ignores whatever is in that ESP packet, and starts over, or, iOS and OS X are sending it something it doesn't like and is forcing it to reset and start over.

GetUserPrincipalName() and mixing between stateful and stateless

I am using VPD, BC4J and the Struts version included in JDEV 9.0.3 final version.
When I am calling
String userName = getUserPrincipalName();
from ApplicationModuleImpl it works fine as long as I am using stateful for all BC4J viewobjects, but when I am mixing between a stateful and stateless application module, getUserPrincipalName() will return the previous users principal.
An Example that will cause this problem:
User 1: Goes to a web page using a stateful AM
User 1: Goes to a web page using a stateless AM
User 2: Goes to a web page using a stateful AM
when user 2 goes to a stateful page he will retrieve
user 1's principal.
My questions are:
1) Does getUserPrincipalName() only work under stateful?
2) Does a struts application using stateful application module lose stateful state after calling a stateless application module?

Ahhh forgot to add something...
if you want to keep your existing exception hirarchy (ABCException extends RemoteException).
then make sure that in your statefull session bean the order of the catch block is first the catch(ABCException) and then the remote exception.
If the catch block for remote exception comes first, then the ABCException will be sent to that block itself because ABCException is a sub class of remote exception.
However, IMHO, business exceptions should not extend the remote exception... as the RemoteException is used to report technical errors and not business errors.
hope this helps ....
regards,
Abhishek.

Complete Deliv and Mixed Item cat and Availability Check

Hi Gurus,
Not sure if this is problem is new, I have searched with no clues.
A SO has 2 item categories. ZTAN, ZTAS. ZTAN is stock item, ZTAS is back to back item where a PO will be created. Same material. There is a GR processing time of 10 days.
SO created on 12.05.2014.
Item 1: MatA     First Date: 15.05.2014     Item Cat: ZTAN Qty: 500     Confirmed Date = 15.05.2014 (Stock Available)
Item 2: MatA     First Date: 15.05.2014     Item Cat: ZTAS Qty: 1000     Confirmed Date = 29.05.2014 (Today + 10 GR Process)
Then tick Complete Deliv. Indicator in SO overview screen.
Item 1: MatA     First Date: 15.05.2014     Item Cat: ZTAN Qty: 500     Confirmed Date = 29.05.2014
Item 2: MatA     First Date: 15.05.2014     Item Cat: ZTAS Qty: 1000     Confirmed Date = 29.05.2014
Save SO.
PO 1st AB line for SO item 2: Confirmed Date = 15.07.2014 results in Both SO item confirmed date = 15.07.2014
PO 2nd AB line for SO item 2: Confirmed Date = 15.06.2014 results in Both SO Item confirmed date = 15.07.2014.
You see the problem is after 2nd AB, confirmed date in SO does not change to earlier confirmed date. And even if we run the standard back order processing V_RA or V_V2, system still does not schedule earlier.
Any solution?

Then tick Complete Deliv. Indicator in SO overview screen.
Item 1: MatA     First Date: 15.05.2014     Item Cat: ZTAN Qty: 500     Confirmed Date = 29.05.2014
Item 2: MatA First Date: 15.05.2014 Item Cat: ZTAS Qty: 1000 Confirmed Date = 29.05.2014
Save SO.
PO 1st AB line for SO item 2: Confirmed Date = 15.07.2014 results in Both SO item confirmed date = 15.07.2014
PO 2nd AB line for SO item 2: Confirmed Date = 15.06.2014 results in Both SO Item confirmed date = 15.07.2014.
When you say system has confirmed in the first instance (29.05.2014), I am not sure where system is showing 15-06-2014 & 15-07-2014.
G. Lakshmipathi

Server app 3, no connection to remote server

I'm using a Mac mini late 2009 with Maverick and a freshly installed Server (v3) as our home server.
While everything is running soomthly so far, I have no chance connecting from my MBPro (w/ Maverick and the OS X Server app 3) to that system for remot adminitration. No matter which credentials I'm submitting, nothing happens (but the login window is shaking).
Any help with this? It's somehow frustrating...
Thanks guys!
Gunnar

Forget it. I'm an idiot.
I forgot to active the "Allow remote admin" setting again

What is the commands for SQL server job to ftp file to remote server?

I created the job to bcp data out and create file on file system. after that, I need to ftp the file over to another box. how can I do it from sql server job?
JulieShop

I would like to suggest a SSIS package with a
FTP Task instead.
Olaf Helper
[ Blog] [ Xing] [ MVP]

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

How do I copy and paste files from a windows remote server to my mac?

How can i copy and paste files from a remote server (windows) to my mac? i have installed cord to connect to the server but now i can´t cpy the files to my mac!

Hi Sara. Tanks for responding. If I cannot figure this out (I was up
until 2am last night), I want to cancel my subscription.
Here are two files you can check on/help me with. When I try again, it
comes up 'an error has occurred when trying to access the service.'
Please advise.
Pat Tomassi
In a message dated 11/1/2014 12:55:23 A.M. Eastern Daylight Time,
[email protected] writes:
How do I copy and paste text from a converted Word document?
created by Sara.Forsberg (https://forums.adobe.com/people/Sara.Forsberg)
in Adobe Acrobat.com Services - View the full discussion
(https://forums.adobe.com/message/6888908#6888908)

Internal server name .local and having a certificate mismatch

I have one RD server with all the roles on it and I'm receiving a SSL certificate error because my internal server name is a .local and the SSL has been assigned to my apps.domainname.com address.
I've ran the powershell cmdlet Set-RDPublishedName to reflect the apps.domainname.com, but this doesn't seem to make a difference.

Hi Bill,
1. We know Set-RDPublishedName worked because it shows apps.domainname.com for Remote computer in the prompt.
2. In Server Manager -- RDS -- Overview -- Tasks -- Deployment Properties -- Certificates tab, please make sure you have set your certificate for all purposes (RDCB Single Sign On, RDCB Publishing, RDWeb, RDG). We know it is not set (at least) for
publishing because you are seeing the Unknown publisher warning.
3. On the client PC, please make sure you have mstsc.exe version 6.2.9200 or later installed. For Windows 7 you need to download and install the DTLS and RDP 8.0 updates. Windows 8 and later already includes the new client.
4. On your server, please enter the following in an administrator command prompt:
wmic /namespace:\\root\CIMV2\TerminalServices PATH Win32_TSGeneralSetting Set SSLCertificateSHA1Hash="e2f034c171b92afc96b23b7f4da15728c1e461a9"
Substitute your certificate's thumbprint for the Hash listed above. The quickest way to get your cert's thumbprint is to open the certificate, on the Details tab highlight the thumbprint with your mouse, press Ctrl-C to copy it, then paste it
into the command prompt using the system menu Edit--Paste command. After pasting simply delete out the spaces in the thumbprint using backspace and the left arrow key.
5. For best results with RD Web Access, please use IE and Allow and Run the Activex control when prompted. Selecting the Private option on the RD Web logon page is preferred.
Once you finished with the above items please test again and reply back here with your results, whether positive or negative.
Thanks.
-TP

How to set up local server to use a remote server for login authentication?

Thank you in advance for any help you can offer.
We are trying to set up a "sub-network" (dont' know if this is the right terminology) using a 10.4 Server OS, to manage a set of clients... the trick is that the client login/home directory information is on a different remote server, and shall remain there, for the most part.
To make it easy to understand here's the environment:
*Local Server:* 10.4 G4 Server Quicksilver 1G dual--we have total control of this one
*Main/remote server:* 10.5 Xserve.. don't know which vintage--we have very very very little input on this machine.. effectively at the mercy of the sysadmin of this system who is very conservative in changing anything (hence the need for a separate server to install applications and client machine-specific profiles, etc since the Xserve admin refuses do it). This serves MacBooks/MacBookPros and few iMacs. (no Windows PC.. as that group of comptuers have their own server)
client: ~20 eMacs/iBooks all running 10.4.
use environment: elementary school-->very low network demand (no e-mail, just running local apps linking to server(s) for licensing and login, and some file saving small files on remote server, user preferences, etc).
The remote server (the Xserve) has all the login authentication, as well as the home directories. every school year, the directories get updated as new students enroll and old students graduate. Currently all the clients are directly linked to the Xserve via LDAP while we bring the local server on-line.
the local sever (our G4 Quicksilver) will have few network applications that will support the client machines. We also will be setting up computer accounts and groups for our clients so that we can properly set their environments (the Xserve admin will not do this on the Xserve, so currently all the clients are connecting to the server as a "guest computer" from what little I understand watching what was done)
now, what is the best way to approach this type of set up with minimal "inconvenience" of the Xserve admin?
I am pretty experienced with standalone UNIX and macOS X administration, but a novice to this whole Server and network setup thing. Any suggestions, instructions, pointers to URLs with how-tos is much appreciated. I am not afraid to use Terminal (grew up on UNIX before GUI), etc., and willing to try safe but unconventional setups if that is what's needed...
thanks for any help!

Oh never mind.... I figured it out myself helps to read up on the manuals. d'oh. sorry for the bandwidth waste...

CREATE file, SAVE a copy on local mechine, UPLOAD a copy to remote server

Hi all,
I have a question to ask here, i am developing a pure java app (client/server) which hopefully can
1) client > create a file (abc.txt for e.g) save a copy in local mechine,
2) upload the file to remote server that currently connected (consider store in server?)
3) than remove the copy in local mechine
-OR-
1) create a document with JTextPane, when click on "Save" button,
2) the file will upload ( through ftp and created abc.txt in remote server)
Is this possible with java application?

Thanks,
but do you have any idea,
how these things can happend...
perhaps i can get some concept from you...about the program design and how the flow of the program..that could make file tranfer...to remote server.
regards

Messaging Server and mix of local and remote server mailboxes?

Similar Messages

Maybe you are looking for