Messeges bloked in queue
Hi All,
The messages are stuck up in queue ,if we check in queue the STATUS is *_connection closed and no data _
Hi ,
First check whether message are getting blocked due to some error. It might be possible that one message is in error state and stucked in the queue. so all the messages which came later on and used the same queue also got blocked though there might not be any error in these message.
If there is very high volume of data posted to XI, there might be chances of blocking as XI may not be able to process all the message very quickly. But if data volume is less. there must be error in message which caused blockng...
Ranjeet Singh.
Similar Messages
-
Hi Guys,
I need to understand how to control the consumption of messeges from JMS Queue.
This is what i tried:
1. I created a Queue names TQ.
2. Then created a BPEL process to enqueue messages in TQ.
3. Created a BPEL process to dequeue messages from TQ
At this time when I checked the TQ in weblogic under Monitoring Tab it was showing "consumer current" = 1
4. I stopped the consumption of the TQ.
5. I loaded 5000 messages in TQ using Enqueue BPEL Process.
6. Now the "Current messages" in Weblogic shows 5000 for TQ
7. After this I enabled the consumption of the TQ.
8. Immediately, I jumped to the em console and checked the "Running Instances" check box for the Dequeue service. it displayed 100 running instances.
9. I no where mentioned the number of instances, all above is without any customisation.
10. I refreshed the console several times, the "Running Instances" count fluctaues between 85 and 110, till the complete load is finished.
Please let me know how can this consumption be controlled and when will the "consumer current" = 1 value changes....?
RegardsHi Arpit,
There is limited support in restricting the consumption. However, you can slow or accelerate the consumption using the following.
To accelerate consumption:_
By default there is 1 poller thread that dequeues the message from JMS. If you increase that thread count, you can accelerate the consumption. Set the adapter.jms.receive.threads Property for this as explained under.
http://docs.oracle.com/cd/E14571_01/core.1111/e10108/adapters.htm#BABCGCEC
To Slow down consumption:_
Introduce the delay between the message consumption as explained under.
Restrict SOA JMS Adapter dequeue frequency
Try with various combinations and let us know how you get along.
Regards
Neeraj Sehgal -
Weblogic.transaction.RollbackException:
Hi All,
We are using a JMS bridge in our senario.The Flow is as follows. Message is been posted in a queue(JMS Queue)
and the host Queue recevies thye message from there it is configured with a bridge where it is targeted to different weblogic server's Queue and whlie transfering the messege from one Queue to the romote queue we are getting error.
The connection between the Queue through bridge is established but after some time we are getting the above error
FYI
####<Dec 3, 2008 1:31:48 PM GMT> <Debug> <MessagingBridge> <DSK-PNQ-900617> <RefCgServer> <ExecuteThread: '8' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <> <BEA-200006> <Messaging bridge debugging RUNTIME! Bridge MB.REF_TO_RG1 Successfully got connection to the source destination.>
We are facing the following error:-
javax.transaction.xa.XAException
javax.transaction.xa.XAException
at weblogic.jms.backend.BEXAResource.prepare(BEXAResource.java:903)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerResourceInfo.java:1234)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerResourceInfo.java:441)
at weblogic.transaction.internal.ServerSCInfo$1.execute(ServerSCInfo.java:253)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
Bridge "MB.REF_TO_RG1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was weblogic.transaction.RollbackException: Could not prepare resource 'JMS_cgJMSStore - with nested exception:
[javax.transaction.xa.XAException].)>
Please help.
Regards
RakeshHi Rakesh,
You may have better luck if you post to the "WebLogic Server - General" forum?
WebLogic Server - General -
Hi All,
We are using a JMS bridge in our senario.The Flow is as follows. Message is been posted in a queue(JMS Queue)
and the host Queue recevies thye message from there it is configured with a bridge where it is targeted to different weblogic server's Queue and whlie transfering the messege from one Queue to the romote queue we are getting error.
The connection between the Queue through bridge is established but after some time we are getting the above error
FYI
####<Dec 3, 2008 1:31:48 PM GMT> <Debug> <MessagingBridge> <DSK-PNQ-900617> <RefCgServer> <ExecuteThread: '8' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <BEA-200006> <Messaging bridge debugging RUNTIME! Bridge MB.REF_TO_RG1 Successfully got connection to the source destination.>
We are facing the following error:-
javax.transaction.xa.XAException
javax.transaction.xa.XAException
at weblogic.jms.backend.BEXAResource.prepare(BEXAResource.java:903)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerResourceInfo.java:1234)
at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerResourceInfo.java:441)
at weblogic.transaction.internal.ServerSCInfo$1.execute(ServerSCInfo.java:253)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
Bridge "MB.REF_TO_RG1" encountered some problems in one of its adapters or underlying systems. It stopped transferring messages and will try to reconnect to the adapters shortly. (The exception caught was weblogic.transaction.RollbackException: Could not prepare resource 'JMS_cgJMSStore - with nested exception:
http://javax.transaction.xa.XAException.)>
Please help.
Regards
RakeshAre the two queues that the bridge is working with in two different WebLogic domains?
If so, please see the following JMS and JTA interop docs to make sure that your configuration is correct.
http://e-docs.bea.com/wls/docs100/bridge/wls_interop.html#wp1126206
http://e-docs.bea.com/wls/docs100/jta/trxcon.html#interop
If you have not done so, you may turn on the bridge debugging and see if you get more information about the error.
-Dweblogic.debug.DebugMessagingBridge=true
-Dweblogic.debug.DebugMessagingBridgeVerbose=true
Regards,
Dongbo -
I am trying to use the "App Store" on my Macbook Pro but it will not allow me to open the program. It automatically says, "App Store has closed unexpectedly." Whenever I tell it to reopen, the exact same messege pops up. My computer has all of the latest updates from Apple.
I tried deleting the program then running the software update to try to get the program again but it did not work. Where can I manual download the actual app store program, or fix the one that I have.
Thanks in advance.
P.S. Here is the error report:
Process: App Store [614]
Path: /Applications/App Store.app/Contents/MacOS/App Store
Identifier: com.apple.appstore
Version: 1.0.2 (63.1)
Build Info: Firenze-630100~1
Code Type: X86-64 (Native)
Parent Process: launchd [107]
Date/Time: 2011-10-09 23:16:25.809 -0600
OS Version: Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report: 606856 sec
Crashes Since Last Report: 18
Per-App Interval Since Last Report: 20 sec
Per-App Crashes Since Last Report: 18
Anonymous UUID: AD72D7A4-83DA-4BB2-96C0-F182941E3B24
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Application Specific Information:
abort() called
*** Terminating app due to uncaught exception 'NSImageCacheException', reason: 'Cannot lock focus on image <NSImage 0x10038aa70 Size={0, 0} Reps=(
)>, because it is size zero.'
*** Call stack at first throw:
0 CoreFoundation 0x00007fff862a77b4 __exceptionPreprocess + 180
1 libobjc.A.dylib 0x00007fff8190af03 objc_exception_throw + 45
2 CoreFoundation 0x00007fff862a75d7 +[NSException raise:format:arguments:] + 103
3 CoreFoundation 0x00007fff862a7564 +[NSException raise:format:] + 148
4 AppKit 0x00007fff865799cc -[NSImage _lockFocusOnRepresentation:rect:context:hints:flipped:] + 319
5 AppKit 0x00007fff86579883 __-[NSImage lockFocusWithRect:context:hints:flipped:]_block_invoke_1 + 100
6 AppKit 0x00007fff8650dc1d -[NSImage _usingBestRepresentationForRect:context:hints:body:] + 178
7 AppKit 0x00007fff86579809 -[NSImage lockFocusWithRect:context:hints:flipped:] + 289
8 AppKit 0x00007fff865796d3 -[NSImage lockFocusFlipped:] + 142
9 App Store 0x000000010001c840 0x0 + 4295084096
10 AppKit 0x00007fff86502444 -[NSControl drawRect:] + 405
11 AppKit 0x00007fff864facc5 -[NSView _drawRect:clip:] + 3390
12 AppKit 0x00007fff864f9938 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 1325
13 AppKit 0x00007fff864f9ca2 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2199
14 AppKit 0x00007fff864f9ca2 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2199
15 AppKit 0x00007fff8651ec5a -[NSToolbarItemViewer _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 301
16 AppKit 0x00007fff864f9ca2 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2199
17 AppKit 0x00007fff864f9ca2 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2199
18 AppKit 0x00007fff864f9ca2 -[NSView _recursiveDisplayAllDirtyWithLockFocus:visRect:] + 2199
19 AppKit 0x00007fff864f800a -[NSView _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 767
20 AppKit 0x00007fff864f7b2c -[NSThemeFrame _recursiveDisplayRectIfNeededIgnoringOpacity:isVisibleRect:rectIsVisibleRectFor View:topView:] + 254
21 AppKit 0x00007fff864f43de -[NSView _displayRectIgnoringOpacity:isVisibleRect:rectIsVisibleRectForView:] + 2683
22 AppKit 0x00007fff8646dc0e -[NSView displayIfNeeded] + 969
23 AppKit 0x00007fff8641f922 -[NSWindow _setFrameCommon:display:stashSize:] + 1895
24 AppKit 0x00007fff86435b34 -[NSWindow _reallyDoOrderWindow:relativeTo:findKey:forCounter:force:isModal:] + 787
25 AppKit 0x00007fff864357d2 -[NSWindow orderWindow:relativeTo:] + 94
26 AppKit 0x00007fff86401974 -[NSIBObjectData nibInstantiateWithOwner:topLevelObjects:] + 1726
27 AppKit 0x00007fff863ffa91 loadNib + 226
28 AppKit 0x00007fff863ff1a4 +[NSBundle(NSNibLoading) _loadNibFile:nameTable:withZone:ownerBundle:] + 763
29 AppKit 0x00007fff863fedd9 +[NSBundle(NSNibLoading) loadNibNamed:owner:] + 326
30 AppKit 0x00007fff863fc35b NSApplicationMain + 279
31 App Store 0x00000001000013f4 0x0 + 4294972404
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0 libSystem.B.dylib 0x00007fff8013c0b6 __kill + 10
1 libSystem.B.dylib 0x00007fff801dc9f6 abort + 83
2 libstdc++.6.dylib 0x00007fff86e915d2 __tcf_0 + 0
3 libobjc.A.dylib 0x00007fff8190eb39 _objc_terminate + 100
4 libstdc++.6.dylib 0x00007fff86e8fae1 __cxxabiv1::__terminate(void (*)()) + 11
5 libstdc++.6.dylib 0x00007fff86e8fb16 __cxxabiv1::__unexpected(void (*)()) + 0
6 libstdc++.6.dylib 0x00007fff86e8fbfc __gxx_exception_cleanup(_Unwind_Reason_Code, _Unwind_Exception*) + 0
7 libobjc.A.dylib 0x00007fff8190afa2 object_getIvar + 0
8 com.apple.CoreFoundation 0x00007fff862ff969 -[NSException raise] + 9
9 com.apple.AppKit 0x00007fff8641fbe4 -[NSWindow _setFrameCommon:display:stashSize:] + 2601
10 com.apple.AppKit 0x00007fff86435b34 -[NSWindow _reallyDoOrderWindow:relativeTo:findKey:forCounter:force:isModal:] + 787
11 com.apple.AppKit 0x00007fff864357d2 -[NSWindow orderWindow:relativeTo:] + 94
12 com.apple.AppKit 0x00007fff86401974 -[NSIBObjectData nibInstantiateWithOwner:topLevelObjects:] + 1726
13 com.apple.AppKit 0x00007fff863ffa91 loadNib + 226
14 com.apple.AppKit 0x00007fff863ff1a4 +[NSBundle(NSNibLoading) _loadNibFile:nameTable:withZone:ownerBundle:] + 763
15 com.apple.AppKit 0x00007fff863fedd9 +[NSBundle(NSNibLoading) loadNibNamed:owner:] + 326
16 com.apple.AppKit 0x00007fff863fc35b NSApplicationMain + 279
17 com.apple.appstore 0x00000001000013f4 0x100000000 + 5108
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0 libSystem.B.dylib 0x00007fff80106c0a kevent + 10
1 libSystem.B.dylib 0x00007fff80108add _dispatch_mgr_invoke + 154
2 libSystem.B.dylib 0x00007fff801087b4 _dispatch_queue_invoke + 185
3 libSystem.B.dylib 0x00007fff801082de _dispatch_worker_thread2 + 252
4 libSystem.B.dylib 0x00007fff80107c08 _pthread_wqthread + 353
5 libSystem.B.dylib 0x00007fff80107aa5 start_wqthread + 13
Thread 2:
0 libSystem.B.dylib 0x00007fff80107a2a __workq_kernreturn + 10
1 libSystem.B.dylib 0x00007fff80107e3c _pthread_wqthread + 917
2 libSystem.B.dylib 0x00007fff80107aa5 start_wqthread + 13
Thread 3: WebCore: LocalStorage
0 libSystem.B.dylib 0x00007fff80128a6a __semwait_signal + 10
1 libSystem.B.dylib 0x00007fff8012c881 _pthread_cond_wait + 1286
2 com.apple.JavaScriptCore 0x00007fff8776e690 ***::ThreadCondition::timedWait(***::Mutex&, double) + 64
3 com.apple.WebCore 0x00007fff808da4c1 WebCore::LocalStorageThread::threadEntryPoint() + 177
4 libSystem.B.dylib 0x00007fff80126fd6 _pthread_start + 331
5 libSystem.B.dylib 0x00007fff80126e89 thread_start + 13
Thread 4:
0 libSystem.B.dylib 0x00007fff80107a2a __workq_kernreturn + 10
1 libSystem.B.dylib 0x00007fff80107e3c _pthread_wqthread + 917
2 libSystem.B.dylib 0x00007fff80107aa5 start_wqthread + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000000 rbx: 0x00007fff700262f8 rcx: 0x00007fff5fbff348 rdx: 0x0000000000000000
rdi: 0x0000000000000266 rsi: 0x0000000000000006 rbp: 0x00007fff5fbff360 rsp: 0x00007fff5fbff348
r8: 0x00007fff70029a60 r9: 0x0000000000000063 r10: 0x00007fff801380fa r11: 0x0000000000000202
r12: 0x00007fff8632cb09 r13: 0x0000000000000000 r14: 0x0000000000000000 r15: 0x0000000000000001
rip: 0x00007fff8013c0b6 rfl: 0x0000000000000202 cr2: 0x00007fff70d6dfd0
Binary Images:
0x100000000 - 0x100044fff com.apple.appstore 1.0.2 (63.1) <9113B2F3-EC62-24EA-C21A-352621712604> /Applications/App Store.app/Contents/MacOS/App Store
0x100065000 - 0x10018eff7 com.apple.CommerceKit 1.0 (60.8) <F3B830C2-00E3-FE72-2D65-FDC943EC65EF> /System/Library/PrivateFrameworks/CommerceKit.framework/Versions/A/CommerceKit
0x7fff5fc00000 - 0x7fff5fc3bdef dyld 132.1 (???) <B536F2F1-9DF1-3B6C-1C2C-9075EA219A06> /usr/lib/dyld
0x7fff8004e000 - 0x7fff8006ffff libresolv.9.dylib 41.0.0 (compatibility 1.0.0) <6993F348-428F-C97E-7A84-7BD2EDC46A62> /usr/lib/libresolv.9.dylib
0x7fff80070000 - 0x7fff800b1ff7 com.apple.MediaKit 10.4 (486) <5ABA1213-744C-5C65-CA8E-84BE866DB7B4> /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit
0x7fff800b2000 - 0x7fff800c3ff7 libz.1.dylib 1.2.3 (compatibility 1.0.0) <FB5EE53A-0534-0FFA-B2ED-486609433717> /usr/lib/libz.1.dylib
0x7fff800c4000 - 0x7fff800ecfff com.apple.DictionaryServices 1.1.2 (1.1.2) <E9269069-93FA-2B71-F9BA-FDDD23C4A65E> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x7fff800ed000 - 0x7fff802aefef libSystem.B.dylib 125.2.11 (compatibility 1.0.0) <9AB4F1D1-89DC-0E8A-DC8E-A4FE4D69DB69> /usr/lib/libSystem.B.dylib
0x7fff802f3000 - 0x7fff802f5fff com.apple.print.framework.Print 6.1 (237.1) <CA8564FB-B366-7413-B12E-9892DA3C6157> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
0x7fff8033c000 - 0x7fff80377fff com.apple.AE 496.5 (496.5) <208DF391-4DE6-81ED-C697-14A2930D1BC6> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x7fff8038c000 - 0x7fff803cfff7 libRIP.A.dylib 545.0.0 (compatibility 64.0.0) <5FF3D7FD-84D8-C5FA-D640-90BB82EC651D> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
0x7fff803d0000 - 0x7fff8049cfff com.apple.installframework 596 (596.1) <ED491B89-5D44-533B-5589-622F21EB4D16> /System/Library/PrivateFrameworks/Install.framework/Versions/A/Install
0x7fff8049d000 - 0x7fff807d1fef com.apple.CoreServices.CarbonCore 861.39 (861.39) <1386A24D-DD15-5903-057E-4A224FAF580B> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x7fff807d2000 - 0x7fff808b7fef com.apple.DesktopServices 1.5.11 (1.5.11) <39FAA3D2-6863-B5AB-AED9-92D878EA2438> /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
0x7fff808b8000 - 0x7fff818f2fff com.apple.WebCore 6534 (6534.50) <8B0BB24A-C84C-A4F2-5544-C8071A35BBC5> /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
0x7fff818f3000 - 0x7fff818f9ff7 com.apple.DiskArbitration 2.3 (2.3) <857F6E43-1EF4-7D53-351B-10DE0A8F992A> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x7fff818fa000 - 0x7fff81900ff7 IOSurface ??? (???) <04EDCEDE-E36F-15F8-DC67-E61E149D2C9A> /System/Library/Frameworks/IOSurface.framework/Versions/A/IOSurface
0x7fff81901000 - 0x7fff819b7ff7 libobjc.A.dylib 227.0.0 (compatibility 1.0.0) <03140531-3B2D-1EBA-DA7F-E12CC8F63969> /usr/lib/libobjc.A.dylib
0x7fff81aae000 - 0x7fff81ac9ff7 com.apple.openscripting 1.3.1 (???) <FD46A0FE-AC79-3EF7-AB4F-396D376DDE71> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
0x7fff81aca000 - 0x7fff81adcfe7 libsasl2.2.dylib 3.15.0 (compatibility 3.0.0) <76B83C8D-8EFE-4467-0F75-275648AFED97> /usr/lib/libsasl2.2.dylib
0x7fff81bdf000 - 0x7fff823e9fe7 libBLAS.dylib 219.0.0 (compatibility 1.0.0) <FC941ECB-71D0-FAE3-DCBF-C5A619E594B8> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x7fff823ea000 - 0x7fff823feff7 com.apple.speech.synthesis.framework 3.10.35 (3.10.35) <621B7415-A0B9-07A7-F313-36BEEDD7B132> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
0x7fff823ff000 - 0x7fff82448ff7 com.apple.securityinterface 4.0.1 (40418) <E2DC796D-84EC-48F5-34A9-DF614573BE74> /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
0x7fff82542000 - 0x7fff82548ff7 com.apple.CommerceCore 1.0 (9.1) <3691E9BA-BCF4-98C7-EFEC-78DA6825004E> /System/Library/PrivateFrameworks/CommerceKit.framework/Versions/A/Frameworks/C ommerceCore.framework/Versions/A/CommerceCore
0x7fff82549000 - 0x7fff82593ff7 com.apple.Metadata 10.6.3 (507.15) <2EF19055-D7AE-4D77-E589-7B71B0BC1E59> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x7fff825a0000 - 0x7fff825b9fff com.apple.CFOpenDirectory 10.6 (10.6) <CCF79716-7CC6-2520-C6EB-A4F56AD0A207> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
0x7fff82801000 - 0x7fff82834ff7 libTrueTypeScaler.dylib ??? (???) <69D4A213-45D2-196D-7FF8-B52A31DFD329> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libTrueTypeScaler.dylib
0x7fff828bd000 - 0x7fff82d00fef libLAPACK.dylib 219.0.0 (compatibility 1.0.0) <0CC61C98-FF51-67B3-F3D8-C5E430C201A9> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x7fff82d01000 - 0x7fff82d50fef libTIFF.dylib ??? (???) <1E2593D1-A7F6-84C6-DF8F-0B46AE445926> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libTIFF.dylib
0x7fff82d51000 - 0x7fff82da4ff7 com.apple.HIServices 1.8.3 (???) <F6E0C7A7-C11D-0096-4DDA-2C77793AA6CD> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
0x7fff82da5000 - 0x7fff82daafff libGFXShared.dylib ??? (???) <1D0D3531-9561-632C-D620-1A8652BEF5BC> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGFXShared.d ylib
0x7fff82dab000 - 0x7fff82e68fff com.apple.CoreServices.OSServices 359.2 (359.2) <BBB8888E-18DE-5D09-3C3A-F4C029EC7886> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x7fff82eb1000 - 0x7fff82eeefff com.apple.LDAPFramework 2.0 (120.1) <16383FF5-0537-6298-73C9-473AEC9C149C> /System/Library/Frameworks/LDAP.framework/Versions/A/LDAP
0x7fff82eef000 - 0x7fff82f05fe7 com.apple.MultitouchSupport.framework 207.11 (207.11) <8233CE71-6F8D-8B3C-A0E1-E123F6406163> /System/Library/PrivateFrameworks/MultitouchSupport.framework/Versions/A/Multit ouchSupport
0x7fff83083000 - 0x7fff830dcfe7 com.apple.PackageKit 1.1.3 (92) <08D0E1A4-8E59-25E9-7203-49BF7B6112AC> /System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/PackageKit
0x7fff830dd000 - 0x7fff83117fff com.apple.bom 10.0 (164) <E5C9AFBD-68C1-197E-72B0-B43295DC87DC> /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
0x7fff83118000 - 0x7fff83196ff7 com.apple.CoreText 151.10 (???) <54961997-55D8-DC0F-2634-674E452D5A8E> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreText.framework/Versions/A/CoreText
0x7fff831e9000 - 0x7fff831eaff7 com.apple.audio.units.AudioUnit 1.6.7 (1.6.7) <53299948-2554-0F8F-7501-04B34E49F6CF> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x7fff831eb000 - 0x7fff832ebfef com.apple.DiskImagesFramework 10.6.8 (289.1) <4F2F2B6C-59D1-0631-71D1-F471BE2CE29A> /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
0x7fff832ec000 - 0x7fff832ecff7 com.apple.CoreServices 44 (44) <DC7400FB-851E-7B8A-5BF6-6F50094302FB> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x7fff832ed000 - 0x7fff83339fff libauto.dylib ??? (???) <F7221B46-DC4F-3153-CE61-7F52C8C293CF> /usr/lib/libauto.dylib
0x7fff8333a000 - 0x7fff83376fe7 libcurl.4.dylib 6.1.0 (compatibility 6.0.0) <1E041185-131C-C237-C250-38BE933A269A> /usr/lib/libcurl.4.dylib
0x7fff83377000 - 0x7fff83382fff com.apple.CrashReporterSupport 10.6.7 (258) <A2CBB18C-BD1C-8650-9091-7687E780E689> /System/Library/PrivateFrameworks/CrashReporterSupport.framework/Versions/A/Cra shReporterSupport
0x7fff83383000 - 0x7fff83433fff edu.mit.Kerberos 6.5.11 (6.5.11) <085D80F5-C9DC-E252-C21B-03295E660C91> /System/Library/Frameworks/Kerberos.framework/Versions/A/Kerberos
0x7fff83434000 - 0x7fff83449ff7 com.apple.LangAnalysis 1.6.6 (1.6.6) <DC999B32-BF41-94C8-0583-27D9AB463E8B> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
0x7fff8344a000 - 0x7fff8344aff7 com.apple.ApplicationServices 38 (38) <10A0B9E9-4988-03D4-FC56-DDE231A02C63> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
0x7fff836b8000 - 0x7fff836bdfff libGIF.dylib ??? (???) <201B8077-B5CC-11AA-E1B0-1D057ABE416A> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libGIF.dylib
0x7fff83741000 - 0x7fff83741ff7 com.apple.vecLib 3.6 (vecLib 3.6) <08D3D45D-908B-B86A-00BA-0F978D2702A7> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x7fff83742000 - 0x7fff83745ff7 com.apple.securityhi 4.0 (36638) <38935851-09E4-DDAB-DB1D-30ADC39F7ED0> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
0x7fff838a7000 - 0x7fff838a8ff7 libScreenReader.dylib ??? (???) <0E570442-073F-D6AD-5014-1FD91C631DCF> /usr/lib/libScreenReader.dylib
0x7fff8390a000 - 0x7fff83915ff7 com.apple.bsd.ServiceManagement 1.3 (1.3) <CEB99ECF-4C55-C3DF-EE64-35903BF7B690> /System/Library/Frameworks/ServiceManagement.framework/Versions/A/ServiceManage ment
0x7fff839a6000 - 0x7fff83d43fe7 com.apple.QuartzCore 1.6.3 (227.37) <16DFF6CD-EA58-CE62-A1D7-5F6CE3D066DD> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x7fff83d44000 - 0x7fff83d4bfff com.apple.OpenDirectory 10.6 (10.6) <4200CFB0-DBA1-62B8-7C7C-91446D89551F> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/OpenDirectory
0x7fff83d4c000 - 0x7fff83decfff com.apple.LaunchServices 362.3 (362.3) <B90B7C31-FEF8-3C26-BFB3-D8A48BD2C0DA> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x7fff83ffe000 - 0x7fff8401eff7 com.apple.DirectoryService.Framework 3.6 (621.11) <AD76C757-6701-BDB5-631E-1CB77D669586> /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
0x7fff84044000 - 0x7fff84045ff7 com.apple.TrustEvaluationAgent 1.1 (1) <51867586-1C71-AE37-EAAD-535A58DD3550> /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/Tru stEvaluationAgent
0x7fff84055000 - 0x7fff842deff7 com.apple.security 6.1.2 (55002) <4419AFFC-DAE7-873E-6A7D-5C9A5A4497A6> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x7fff842df000 - 0x7fff8436ffff com.apple.SearchKit 1.3.0 (1.3.0) <4175DC31-1506-228A-08FD-C704AC9DF642> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x7fff8461d000 - 0x7fff847b9fff com.apple.WebKit 6534 (6534.50) <05AEA122-3F31-0F56-4AA6-E84140C53785> /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
0x7fff847ba000 - 0x7fff847ebfff libGLImage.dylib ??? (???) <7F102A07-E4FB-9F52-B2F6-4E2D2383CA13> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLImage.dyl ib
0x7fff847ec000 - 0x7fff84856fe7 libvMisc.dylib 268.0.1 (compatibility 1.0.0) <75A8D840-4ACE-6560-0889-2AFB6BE08E59> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x7fff84901000 - 0x7fff849c2fff libFontParser.dylib ??? (???) <A00BB0A7-E46C-1D07-1391-194745566C7E> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontParser.dylib
0x7fff849c3000 - 0x7fff849c6ff7 libCoreVMClient.dylib ??? (???) <E03D7C81-A3DA-D44A-A88A-DDBB98AF910B> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreVMClien t.dylib
0x7fff849c7000 - 0x7fff849ddfef libbsm.0.dylib ??? (???) <42D3023A-A1F7-4121-6417-FCC6B51B3E90> /usr/lib/libbsm.0.dylib
0x7fff849de000 - 0x7fff849f2fff libGL.dylib ??? (???) <2ECE3B0F-39E1-3938-BF27-7205C6D0358B> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib
0x7fff849f3000 - 0x7fff84a1aff7 libJPEG.dylib ??? (???) <46A413EA-4FD1-A050-2EF0-6279F3EAD581> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libJPEG.dylib
0x7fff8524c000 - 0x7fff85250ff7 libCGXType.A.dylib 545.0.0 (compatibility 64.0.0) <DB710299-B4D9-3714-66F7-5D2964DE585B> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGXType.A.dylib
0x7fff854bb000 - 0x7fff854e6ff7 libxslt.1.dylib 3.24.0 (compatibility 3.0.0) <8AB4CA9E-435A-33DA-7041-904BA7FA11D5> /usr/lib/libxslt.1.dylib
0x7fff854e7000 - 0x7fff85606fe7 libcrypto.0.9.8.dylib 0.9.8 (compatibility 0.9.8) <14115D29-432B-CF02-6B24-A60CC533A09E> /usr/lib/libcrypto.0.9.8.dylib
0x7fff85607000 - 0x7fff85905fff com.apple.HIToolbox 1.6.5 (???) <AD1C18F6-51CB-7E39-35DD-F16B1EB978A8> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
0x7fff85e12000 - 0x7fff85e12ff7 com.apple.Accelerate.vecLib 3.6 (vecLib 3.6) <DA9BFF01-40DF-EBD5-ABB7-787DAF2D77CF> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/vecLib
0x7fff85e13000 - 0x7fff85f2dfef libGLProgrammability.dylib ??? (???) <8A4B86E3-0FA7-8684-2EF2-C5F8079428DB> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLProgramma bility.dylib
0x7fff861f6000 - 0x7fff8636dfe7 com.apple.CoreFoundation 6.6.5 (550.43) <31A1C118-AD96-0A11-8BDF-BD55B9940EDC> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff8637a000 - 0x7fff863f9fe7 com.apple.audio.CoreAudio 3.2.6 (3.2.6) <79E256EB-43F1-C7AA-6436-124A4FFB02D0> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x7fff863fa000 - 0x7fff86df4ff7 com.apple.AppKit 6.6.8 (1038.36) <4CFBE04C-8FB3-B0EA-8DDB-7E7D10E9D251> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x7fff86df5000 - 0x7fff86e44ff7 com.apple.DirectoryService.PasswordServerFramework 6.1 (6.1) <01B370FB-D524-F660-3826-E85B7F0D85CD> /System/Library/PrivateFrameworks/PasswordServer.framework/Versions/A/PasswordS erver
0x7fff86e45000 - 0x7fff86ec2fef libstdc++.6.dylib 7.9.0 (compatibility 7.0.0) <35ECA411-2C08-FD7D-11B1-1B7A04921A5C> /usr/lib/libstdc++.6.dylib
0x7fff86ec3000 - 0x7fff86ff8fff com.apple.audio.toolbox.AudioToolbox 1.6.7 (1.6.7) <E5D7DBDB-6DDF-E6F9-C71C-86F4520EE5A3> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x7fff86ff9000 - 0x7fff87006ff7 com.apple.AppleFSCompression 24.4 (1.0) <57D6F613-CB5E-75BC-E351-3272D62227F5> /System/Library/PrivateFrameworks/AppleFSCompression.framework/Versions/A/Apple FSCompression
0x7fff87007000 - 0x7fff87041fff libcups.2.dylib 2.8.0 (compatibility 2.0.0) <539EBFDD-96D6-FB07-B128-40232C408757> /usr/lib/libcups.2.dylib
0x7fff87042000 - 0x7fff870a2fe7 com.apple.framework.IOKit 2.0 (???) <4F071EF0-8260-01E9-C641-830E582FA416> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x7fff87217000 - 0x7fff87258fff com.apple.SystemConfiguration 1.10.8 (1.10.2) <78D48D27-A9C4-62CA-2803-D0BBED82855A> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x7fff87259000 - 0x7fff8725dff7 libmathCommon.A.dylib 315.0.0 (compatibility 1.0.0) <95718673-FEEE-B6ED-B127-BCDBDB60D4E5> /usr/lib/system/libmathCommon.A.dylib
0x7fff87277000 - 0x7fff87435fff libicucore.A.dylib 40.0.0 (compatibility 1.0.0) <4274FC73-A257-3A56-4293-5968F3428854> /usr/lib/libicucore.A.dylib
0x7fff87436000 - 0x7fff87453ff7 libPng.dylib ??? (???) <6D8E515B-E0A2-2BA1-9CAC-8CB8A8B35879> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libPng.dylib
0x7fff87454000 - 0x7fff87509fe7 com.apple.ink.framework 1.3.3 (107) <FFC46EE0-3544-A459-2AB9-94778A75E3D4> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
0x7fff87526000 - 0x7fff8755dff7 com.apple.DiskManagement 3.6 (358) <D0D9E19C-7F01-CEB6-681D-0B20D3B7E9B4> /System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/DiskManag ement
0x7fff8755e000 - 0x7fff875a6ff7 libvDSP.dylib 268.0.1 (compatibility 1.0.0) <170DE04F-89AB-E295-0880-D69CAFBD7979> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x7fff875a7000 - 0x7fff876e5fff com.apple.CoreData 102.1 (251) <32233D4D-00B7-CE14-C881-6BF19FD05A03> /System/Library/Frameworks/CoreData.framework/Versions/A/CoreData
0x7fff87764000 - 0x7fff87971ff7 com.apple.JavaScriptCore 6534 (6534.49) <1D418EF7-CDBE-3832-0157-D853073948D0> /System/Library/Frameworks/JavaScriptCore.framework/Versions/A/JavaScriptCore
0x7fff87972000 - 0x7fff879afff7 libFontRegistry.dylib ??? (???) <4C3293E2-851B-55CE-3BE3-29C425DD5DFF> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontRegistry.dylib
0x7fff879e1000 - 0x7fff87e28fef com.apple.RawCamera.bundle 3.7.1 (570) <5AFA87CA-DC3D-F84E-7EA1-6EABA8807766> /System/Library/CoreServices/RawCamera.bundle/Contents/MacOS/RawCamera
0x7fff87e29000 - 0x7fff87e58fff com.apple.framework.Admin 4.6 (4.6) <376BC531-CE46-A147-9AF5-4D8F8E1522C5> /System/Library/PrivateFrameworks/Admin.framework/Versions/A/Admin
0x7fff87e59000 - 0x7fff87e70fff com.apple.ImageCapture 6.1 (6.1) <79AB2131-2A6C-F351-38A9-ED58B25534FD> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
0x7fff87fe3000 - 0x7fff88008ff7 com.apple.CoreVideo 1.6.2 (45.6) <E138C8E7-3CB6-55A9-0A2C-B73FE63EA288> /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
0x7fff8800a000 - 0x7fff8800fff7 com.apple.CommonPanels 1.2.4 (91) <4D84803B-BD06-D80E-15AE-EFBE43F93605> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
0x7fff88010000 - 0x7fff88010ff7 com.apple.Cocoa 6.6 (???) <68B0BE46-6E24-C96F-B341-054CF9E8F3B6> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
0x7fff88011000 - 0x7fff88052fef com.apple.QD 3.36 (???) <5DC41E81-32C9-65B2-5528-B33E934D5BB4> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
0x7fff88076000 - 0x7fff88077fff liblangid.dylib ??? (???) <EA4D1607-2BD5-2EE2-2A3B-632EEE5A444D> /usr/lib/liblangid.dylib
0x7fff88078000 - 0x7fff88139fef com.apple.ColorSync 4.6.6 (4.6.6) <BB2C5813-C61D-3CBA-A8F7-0E59E46EBEE8> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
0x7fff881a3000 - 0x7fff881a3ff7 com.apple.Carbon 150 (152) <19B37B7B-1594-AD0A-7F14-FA2F85AD7241> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x7fff881b6000 - 0x7fff881fffef libGLU.dylib ??? (???) <1C050088-4AB2-2BC2-62E6-C969F925A945> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGLU.dylib
0x7fff882ac000 - 0x7fff88346fe7 com.apple.ApplicationServices.ATS 275.16 (???) <4B70A2FC-1902-5F27-5C3B-5C78C283C6EA> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
0x7fff88347000 - 0x7fff88347ff7 com.apple.Accelerate 1.6 (Accelerate 1.6) <2BB7D669-4B40-6A52-ADBD-DA4DB3BC0B1B> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
0x7fff88348000 - 0x7fff88420ff7 com.apple.DiscRecording 5.0.9 (5090.4.2) <1559C58F-ABD2-0C13-7E1D-75450FEC41D4> /System/Library/Frameworks/DiscRecording.framework/Versions/A/DiscRecording
0x7fff884dd000 - 0x7fff884ecfff com.apple.NetFS 3.2.2 (3.2.2) <7CCBD70E-BF31-A7A7-DB98-230687773145> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
0x7fff88831000 - 0x7fff88948fef libxml2.2.dylib 10.3.0 (compatibility 10.0.0) <1B27AFDD-DF87-2009-170E-C129E1572E8B> /usr/lib/libxml2.2.dylib
0x7fff88949000 - 0x7fff88955fff libbz2.1.0.dylib 1.0.5 (compatibility 1.0.0) <6FB0A8F4-72A1-D28F-E801-DE2C7498AFB9> /usr/lib/libbz2.1.0.dylib
0x7fff88956000 - 0x7fff88961ff7 com.apple.speech.recognition.framework 3.11.1 (3.11.1) <F0DDF27E-DB55-07CE-E548-C62095BE8167> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
0x7fff88962000 - 0x7fff88a3ffff com.apple.vImage 4.1 (4.1) <C3F44AA9-6F71-0684-2686-D3BBC903F020> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vImage.fr amework/Versions/A/vImage
0x7fff88a40000 - 0x7fff88a4ffff libxar.1.dylib ??? (???) <CBAF862A-3C77-6446-56C2-9C4461631AAF> /usr/lib/libxar.1.dylib
0x7fff88a50000 - 0x7fff88a53fff com.apple.help 1.3.2 (41.1) <BD1B0A22-1CB8-263E-FF85-5BBFDE3660B9> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
0x7fff88a54000 - 0x7fff88cd6fe7 com.apple.Foundation 6.6.7 (751.62) <6F2A5BBF-6990-D561-2928-AD61E94036D9> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x7fff88d23000 - 0x7fff88d32fef com.apple.opengl 1.6.13 (1.6.13) <516098B3-4517-8A55-64BB-195CDAA5334D> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x7fff88e4e000 - 0x7fff88e71fff com.apple.opencl 12.3.6 (12.3.6) <42FA5783-EB80-1168-4015-B8C68F55842F> /System/Library/Frameworks/OpenCL.framework/Versions/A/OpenCL
0x7fff88e72000 - 0x7fff88e74fff libRadiance.dylib ??? (???) <A9DB4D5D-4072-971B-DEF6-DDE645F415EA> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/Resources/libRadiance.dylib
0x7fff896bb000 - 0x7fff89740ff7 com.apple.print.framework.PrintCore 6.3 (312.7) <CDFE82DD-D811-A091-179F-6E76069B432D> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
0x7fff898b3000 - 0x7fff89a71ff7 com.apple.ImageIO.framework 3.0.4 (3.0.4) <0A4F51A1-4502-767B-8A4E-F14C6214EF88> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ImageIO.framework/Versions/A/ImageIO
0x7fff89a72000 - 0x7fff89a80ff7 libkxld.dylib ??? (???) <8145A534-95CC-9F3C-B78B-AC9898F38C6F> /usr/lib/system/libkxld.dylib
0x7fff89bce000 - 0x7fff89c15ff7 com.apple.coreui 2 (114) <D7645B59-0431-6283-7322-957D944DAB21> /System/Library/PrivateFrameworks/CoreUI.framework/Versions/A/CoreUI
0x7fff89c16000 - 0x7fff89c23fe7 libCSync.A.dylib 545.0.0 (compatibility 64.0.0) <1C35FA50-9C70-48DC-9E8D-2054F7A266B1> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
0x7fff89c2c000 - 0x7fff89ce5fff libsqlite3.dylib 9.6.0 (compatibility 9.0.0) <2C5ED312-E646-9ADE-73A9-6199A2A43150> /usr/lib/libsqlite3.dylib
0x7fff89ce6000 - 0x7fff8a3e2ff7 com.apple.CoreGraphics 1.545.0 (???) <58D597B1-EB3B-710E-0B8C-EC114D54E11B> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x7fff8a3e3000 - 0x7fff8a420ff7 libssl.0.9.8.dylib 0.9.8 (compatibility 0.9.8) <F743389F-F25A-A77D-4FCA-D6B01AF2EE6D> /usr/lib/libssl.0.9.8.dylib
0x7fff8a421000 - 0x7fff8a476ff7 com.apple.framework.familycontrols 2.0.2 (2020) <F09541B6-5E28-1C01-C1AE-F6A2508670C7> /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyCon trols
0x7fff8a4c3000 - 0x7fff8a597fe7 com.apple.CFNetwork 454.12.4 (454.12.4) <C83E2BA1-1818-B3E8-5334-860AD21D1C80> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x7fff8a598000 - 0x7fff8a624fef SecurityFoundation ??? (???) <6860DE26-0D42-D1E8-CD7C-5B42D78C1E1D> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
0x7fffffe00000 - 0x7fffffe01fff libSystem.B.dylib ??? (???) <9AB4F1D1-89DC-0E8A-DC8E-A4FE4D69DB69> /usr/lib/libSystem.B.dylibFrom the menu bar, select
▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected. -
Consuming Data from Queue using proxy service
Hi , i am coming up the problem of consuming the queue .
My flow is like :
1. Created Connection factory(JNDI - cf) targeting Admin Server and queue(JNDI - q) targeting WllsbJmsserver.
2. Created A JMS based Buissness Service of Any XML type and it is used for publishing the incoming xml payload to the destination queue (q).
3. Now i am able to see the published payload on the console using monitoring option of the queue.
4. Now i have created the proxy service and gave the same url as given for BS (jms://localhost:7001/cf/q).
5.After activating the session the Messege Current Count on weblogic console is now coming 0 as i think it's being consumed up by the proxy service, but I am not able to see the consumed message.
6.I want to do some processing on the message, how to go about this?
My requirement is that i wanted to store some ID in a queue and used that particular id /consume that particaular id in some other proxy service .Anuj,
I tried one more flow ...
My resources are:
1.BS :BSQ_Push
2.PS :PS_Read_Message
3.PS: PS_Publish_Message
I edit the pipeline of PS_Publish_Message and made a route to PS_Publish_Message service and added some more actions and i am listing up all the actions below step by step
Message Flow for PS_Publish_Message
a. Postiing Message In Queue stage:
Publish to [ BSQ_Push ] used , and Request Actions used : Log [ $body ]
b. Route to [ PS_Read_Messege ]
Message Flow for PS_Read_Message :
a. Reading Message Stage :
Log [$body ]
But at the end my logs are as follows when i run the PS_Publish_Message wth a request as <id>Abhinav</id> :
####<Apr 1, 2011 2:19:50 PM IST> <Error> <ALSB Logging> <Abhinav9639-g15> <AdminServer> <[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <62e9b948932bcb91:7dc8e539:12f0f9d195c:-8000-0000000000043f89> <1301647790389> <BEA-000000> < [Publishing Messege Pipeline, Publishing Messege Pipeline_request, Postiing Messege In Queue, REQUEST] ||||||||||||Posting Messege In Queue ||||||||||: <soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<id>Abhinav</id>
</soapenv:Body>>
####<Apr 1, 2011 2:19:50 PM IST> <Error> <ALSB Logging> <Abhinav9639-g15> <AdminServer> <[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <62e9b948932bcb91:7dc8e539:12f0f9d195c:-8000-0000000000043f89> <1301647790551> <BEA-000000> < [Reading Queue Pipeline, Reading Queue Pipeline_request, Reading Message, REQUEST] ---------------------Log For ID in Read Proxy Flow--------------------------------: <soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<id>Abhinav</id>
</soapenv:Body>>
####<Apr 1, 2011 2:19:50 PM IST> <Error> <ALSB Logging> <Abhinav9639-g15> <AdminServer> <[ACTIVE] ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <62e9b948932bcb91:7dc8e539:12f0f9d195c:-8000-0000000000043f89> <1301647790578> <BEA-000000> < [Reading Queue Pipeline, Reading Queue Pipeline_request, Reading Message, REQUEST] ---------------------Log For ID in Read Proxy Flow--------------------------------: <soapenv:Body xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"/>> -
Sun java sys messeging srvr takes so long (1 hour ) to send a message,why??
hi there,
my messeging server takes so long to send a message.please tell me the reason and what to do to fix the problem.
hope hear you soon
best regard,
[email protected]Not nearly enough data for me to hazard a guess:
1. How is your server connected to the internet?
2. Is this for every message, or was one stuck?
3. How large was the message?
4. How did you send it to your server?
5. How many messages are there in the queue?
6. Were there any errors logged into your mail.log_current? -
Would like to know , subscriber defined for the queue.
Hi all,
i am new to Oracle AQ. we are using oracle 9.2.04 version.in our setup there are external interfaces which access queues and de-queue messeges. Sometime these interface goes down and messeges get stuck in the queue and the blockage grow. i would like to know , how can i check what are the interfaces working on my 'XYZ' queues to fix the problem. thanks in advanceTry this - you can broadcast a message [[with message retaintion time set a little higher so that messages stay in the queue for sometime]] to the queue you want to monitor. Then you can check the queue table in the database. It must have messages listed out for all the subscribers.
Sanju. -
Dispatcher dies with message dialog queue standstill
Hi All,
SAP WAS 6.20 is installed in win2000 server with oracle 9i as the database.
When trying to start the server with SAP managment console
messeger and dispatcher comes up fine. But within some seconds dispatcher stops.
When trying to restart again messeger starts but dispatcher turns yellow with a message "dialog queue standstill" and stops.
Please see the developer trace below.Need your help to bring the server up.
Thanks and regards,
Niranjan
trc file: "dev_w11", trc level: 1, release: "620"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Oct 27 22:37:44 2004
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\KNW\SYS\exe\run\dboraslib.dll' ...
B Library 'D:\usr\sap\KNW\SYS\exe\run\dboraslib.dll' loaded
B Version of 'D:\usr\sap\KNW\SYS\exe\run\dboraslib.dll' is "620.02", patchlevel (0.1504)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6200
M patchlevel 0
M patchno 1509
M intno 20020600
M make: multithreaded, ASCII
M pid 1916
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc11 1916) [dpxxdisp.c 1088]
I MtxInit: -2 0 0
M DpShMCreate: sizeof(wp_adm) 12920 (760)
M DpShMCreate: sizeof(tm_adm) 1692424 (8420)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05CC0040, size: 1979784)
M DpShMCreate: allocated sys_adm at 05CC0040
M DpShMCreate: allocated wp_adm at 05CC0638
M DpShMCreate: allocated tm_adm_list at 05CC38B0
M DpShMCreate: allocated tm_adm at 05CC38D8
M DpShMCreate: allocated wp_ca_adm at 05E60BE0
M DpShMCreate: allocated appc_ca_adm at 05E65230
M DpShMCreate: allocated comm_adm_list at 05E669A0
M DpShMCreate: allocated comm_adm at 05E669B8
M DpShMCreate: allocated ca_info at 05E957B8
M DpShMCreate: allocated wall_adm at 05E957C0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 11 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M
M Wed Oct 27 22:37:45 2004
M calling db_connect ...
C Got ORACLE_HOME=D:\oracle\ora92 from environment
C
C Wed Oct 27 22:37:46 2004
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPKNW's password
C Connecting as /@KNW on connection 0 ...
C Attaching to DB Server KNW (con_hdl=0,svchp=081810CC,svrhp=08183334)
C Starting user session (con_hdl=0,svchp=081810CC,srvhp=08183334,usrhp=0818BB1C)
C
C Wed Oct 27 22:37:47 2004
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3795]
C Detaching from DB Server (con_hdl=0,svchp=081810CC,srvhp=08183334)
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9702]
C Try to connect with default password
C Connecting as SAPKNW/<pwd>@KNW on connection 0 ...
C Attaching to DB Server KNW (con_hdl=0,svchp=081810CC,svrhp=08183334)
C Starting user session (con_hdl=0,svchp=081810CC,srvhp=08183334,usrhp=0818BB1C)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3795]
C Detaching from DB Server (con_hdl=0,svchp=081810CC,srvhp=08183334)
C *** ERROR => CONNECT failed with sql error '1033'
[dboci.c 9702]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 957] [dbsh 0957 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1199]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 8787]
M
M Info for wp 11
M
M stat = 4
M reqtype = 3
M rq_info = 0
M act_reqtype = -1
M tid = -1
M mode = 255
M len = -1
M rq_id = -1
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server WHPWKNOW_KNW_00 on host WHPWKNOW (wp 11)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Oct 27 22:37:47 2004
M * RELEASE 620
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 8932
M * COUNTER 1
M *
M *****************************************************************************
M
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 672]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 238]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc11 1916) [dpnttool.c 356]Hi,
check please your konfiguration files (tnsnames.ora, listener.ora, sqlnet.ora). Entries like service or global names should be the same in tnsnames.ora and listener.ora files.
In sqlnet.ora you should have the entry<i> SQLNET.AUTHENTICATION_SERVICE = (TNS).</i> You need it for your sap users (<SID>adm and SAPSERVICE<SID>).
Read please the note: 480266.
Your environment variables should be set correct. Read please the note 556232 for it (WINDOWS)
Read also please the notes 35278, 445038 and 400241.
Best regards
K.Baran
Message was edited by: Kutbettin Baran
Message was edited by: Kutbettin Baran
Message was edited by: Kutbettin Baran -
Getting all values from a queue
Hi all,
I have a queue as follows:
[123] - intital Context
[sollinger Str]
[123] - CC
[Solinger Str]
[123] - Final context
An image of the queue looks as follows:
[http://i42.tinypic.com/hsj052.jpg]
Iam getting this queue in a userdefined function. I want to get or copy all the values from this queue to a new array as follows without any contexts.
That is, I want to have a queue as follows from the above queue.
[123]
[sollinger Str]
[123]
[Solinger Str]
[123]
How could that be done...
Thanks
PHi guys...thanks 1 more thing
If My inbound queue "a" is as follows:
SUPRESS
AP
YG
LF
contextChange
YG
LF
Final Context
In my Queue "b" which is as follows
SUPRESS
123
sollinger...
123
Sollinger...
123
FinalContext
My requirement is in my "b" queue , I want to put a CC as follows by using a standard node function if possible
SUPRESS
123
sollinger...
123
contextChange
Sollinger...
123
FinalContext
IF THAT dont work Inside my UDF I want to put thE CC for the b queue.
How will the loop behave then?
What will be passed to my input queue "a" and "b" when execute "all values on context" is set.
"a" has a context and "b" doent have one.
My UDF
public static void Test(String[] a,
String[] b,
ResultList result,
Container container){
//Contains no context change
String b[] = {ResultList.SUPPRESS,"12","sollinger","12","sollinger","12",
ResultList.CC};
I make the following steps
copy to an arraylist. add a context change in between.
copy back to string b. -
Problem with Queue and threads
Hello,
the following is the code :
public class Tester extends Thread
private String fname;
public String getFname()
return fname;
public void setFname(String fname)
this.fname = fname;
public Tester(String fname){
super();
this.fname = fname;
}Heres another class
class N {
Thread r = null;
public void checkQ()
Queue q = new ConcurrentLinkedQueue<N>();
for(int i = 0; i < 13; i++)
System.out.println("FOR I is "+i);
r = new Tester("Name" + i);
q.offer(r);
processq(q);
public void processq(Queue queueOfM)
if(queueOfM.size() > 10)
System.out.println("size of queueofM is "+queueOfM.size());
for(int j=0; j < queueOfM.size();j++)
System.out.println("J is "+j);
this.r = (Thread)queueOfM.poll();
this.r.start();
}When run, the code prints :
FOR I is 0
FOR I is 1
FOR I is 2
FOR I is 3
FOR I is 4
FOR I is 5
FOR I is 6
FOR I is 7
FOR I is 8
FOR I is 9
FOR I is 10
size of queueofm is 11
J is 0
J is 1
J is 2
J is 3
J is 4
J is 5
FOR I is 11
FOR I is 12I was expecting the code to print the J till 11.
Could you please help me find where I went wrong ?I think I may have been asking a wrong question.
class N {
Thread r = null;
public void checkQ()
Queue q = new ConcurrentLinkedQueue<N>();
for(int i = 0; i < 13; i++)
System.out.println("FOR I is "+i);
r = new Tester("Name" + i);
q.offer(r);
processq(q);
public void processq(Queue queueOfM)
if(queueOfM.size() > 10)
System.out.println("size of queueofM is "+queueOfM.size());
for(int j=0; j < queueOfM.size();j++)
System.out.println("J is "+j);
this.r = (Thread)queueOfM.poll();
this.r.start();
}The if in the processq method will come true when I is 11. so, once in the if, the for loop is executed. The j is checked till it is < 11 and then the value of j is being printed. So, as I was expecting J should print till atleast 10. However it is printing till 5 and quitting the loop, I dont know how or why, for which I was thinking if someone could show me why. -
Performance and W/R-Queue problems
I'm new to NICAN programming and I'm in trouble with some weird behaviour:
To measure bus-load with "KVASER Navigator" i wrote a simple program that sends very quickly a great number of frames.
The first thing i noticed is the poor performance, reaching only about 70% of bus-load at 100K and at full processor load.
And the second, (n := number of sent frames) only
n-WRITE_QUEUE_LENGTH frames are send, the rest still is in the queue until a Queue-Overflow happens and the remaining 10 frames are sent, but at least 1 frame (which causes the Queue-Overflow still remains in the queue).
Im using Celeron-600MHz, Win2000+SP5, NICAN PCI S2 (1Port) + newest driver 2.1.2 Beta
My sourcecode: please see file-attachment CanBusLoa
dTest.cpp
Attachments:
CanBusLoadTest.cpp 3 KBTry setting a larger write buffer. Also see this KnowledgeBase about Optimizing CAN performance:
http://digital.ni.com/public.nsf/websearch/7076642EBC9B819986256CEE00805F60?OpenDocument -
Dear all,
sorry for opening another thread on this.
I think I have a performance issue with workflows attached to document sets in SharePoint. And I say “I think” because people keep telling me that this is the way it just is.
The user creates a new document set, which triggers a workflow in which the user has to confirm/review/approve a series of tasks. The time it takes from clicking the OK button on those task form to the workflow status moving to the next step is about 4 seconds.
And visiting that status page within those 4 seconds brings up the infamous “Note: Due to heavy load, the latest workflow operation has been queued. It will attempt to resume at a later time.” message.
Hitting Refresh in the browser after those 4 seconds will make the new workflow status appear and the red text go away.
Is that normal? Is that the performance that everyone else is seeing as well?
I struggle to see why simply moving a workflow from one task to another should take that on a machine that isn’t doing anything else at the time.
(1)
I have a standalone (non-clustered) SharePoint box, 4 CPUs, 8 GB of memory, more than half of that available, acting as application server and wfe; only the database is on different box.
(2)
The CPU only goes up to 18 or 19%, so CPU does not seem to be the bottleneck. Half the RAM is also still free.
(3)
The workflow is designed with Nintex, and has about 9 flexi and review tasks – the last 2 of them in a loop iterating over typically 3 or 4 items.
(4)
Looking at the logs it looks like the processing in Nintex only takes about 1 second – I don’t know where the other 3 seconds are going.
(5)
There is nothing obvious in the logs.
(6)
We’ve looked at all the “theoretical” improvements around throttling and batch sizes etc. – none of them appeared make any difference. And the workflow is so small that it looks like my tasks gets executed straight away. The problem appears
to be that the execution takes too long(?) and therefore has not finished by the time the page get redrawn.
(7)
I am running perfmon and I can e.g. see one(!) workflow being loaded into memory – as expected as I am the only user.
(8)
I am seeing a total of 3(?) SQL queries being executed(?). I get the Bytes Sent/sec spiking at 25K, and Bytes received at 18K. But is this good or bad or a bottleneck?
Where do I take it from here?
I have been told that “[…] most customers have no issue with this as they are used to the way SP operates and it can be slow at times.” Is it really that bad?
If it is worth watching more performance counters then I’d need to know what to compare them to.
Is there something else I am missing?
Thanks
MartinHi,
Before considering an additional hardware try to change following configurations for workflow:
Increase Throttle Size
Increase Batch Size
Time Out
Workflow Timer Interval
AutoCleanUpDays
Increase Throttle Size
The Workflow throttle setting controls how many Workflows can be processing at any one time on the entire server farm. By increasing the throttle it will allow the number of Workflows execution or can be initiated at a time.
Use below PowerShell command to get the current Throttle Size:
Get-SPFarmConfig | Select WorkflowPostponeThreshold
Use below PowerShell command to set new Throttle Size:
Set-SPFarmConfig -WorkflowPostponeThreshold 100
Increase Batch Size
This is the size that determines number of events processed for a single Workflow instance. Default value is 100, but it can be range from 1 to any number.
Use below PowerShell command to get the current Batch Size:
Get-SPFarmConfig | Select WorkflowBatchSize
Use below PowerShell command to set new Batch Size:
Set-SPFarmConfig -WorkflowBatchSize 200
Time Out
This decides the time out of the Workflow event. The default value is 5 and can be any integer. The time is in minute.
Use below STSADM command to get the current Time Out value:
stsadm -o getproperty -pn workflow-eventdelivery-timeout
Use below STSADM command to get the current Time Out value:
stsadm -o setproperty -pn workflow-eventdelivery-timeout -pv “15″
Workflow Timer Interval
This setting is applicable at Web Application level and not the farm level. The workflow timer interval specifies how often the workflow SPTimer job fires to process pending workflow tasks. This interval also represents the granularity of delay timers within
your workflow. If a timer is set to delay for one minute, but the interval timer fires only every five minutes, the workflow delays for five minutes, not one minute.
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o getproperty -pn job-workflow -url <Web Application Url>
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o setproperty -pn job-workflow -pv “Every 10 minutes between 0 and 30″ -url <Web Application Url>
Here is the url for reference :
http://praveenkasireddy.wordpress.com/2013/06/14/workflow-due-to-heavy-load-the-latest-workflow-operation-has-been-queued-it-will-attempt-to-resume-at-a-later-time/ -
I have SharePoint 2010 Enterprise running SP1. Configuration is one SharePoint server in the farm and a SQL 2008 R2 database for the backend. Our user environment is 80 users with very little load on the SharePoint server. I have the workflow timer
set to 1 minute.
I have a SPD workflow that starts manually on a form library. Whenever I publish a new version of the workflow, the next time I start the workflow it takes the full minute to finish. If I click on the workflow status before it finishes, I see the message
"Due to heavy load, the latest workflow operation has been queued. It will
attempt to resume at a later time.". After the minute completes the workflow finishes.
Here's the weird thing, the next time I start the workflow, it runs in a couple of seconds - almost instantly. I've tried up to 15 times after the inital publishing and everything seems to work fine on initiation.
Well, that would be fine for me, however, I intermintantly get this heavy load message during task processes that are running inside the workflow. It's probably less than 5% of the time. It's really frustrating though so I appreciate some help. I'm look
online and haven't found anything that describes my situation.
Thank you in advance!Hi,
Before considering an additional hardware try to change following configurations for workflow:
Increase Throttle Size
Increase Batch Size
Time Out
Workflow Timer Interval
AutoCleanUpDays
Increase Throttle Size
The Workflow throttle setting controls how many Workflows can be processing at any one time on the entire server farm. By increasing the throttle it will allow the number of Workflows execution or can be initiated at a time.
Use below PowerShell command to get the current Throttle Size:
Get-SPFarmConfig |
Select WorkflowPostponeThreshold
Use below PowerShell command to set new Throttle Size:
Set-SPFarmConfig -WorkflowPostponeThreshold
100
Increase Batch Size
This is the size that determines number of events processed for a single Workflow instance. Default value is 100, but it can be range from 1 to any number.
Use below PowerShell command to get the current Batch Size:
Get-SPFarmConfig |
Select WorkflowBatchSize
Use below PowerShell command to set new Batch Size:
Set-SPFarmConfig -WorkflowBatchSize
200
Time Out
This decides the time out of the Workflow event. The default value is 5 and can be any integer. The time is in minute.
Use below STSADM command to get the current Time Out value:
stsadm -o getproperty -pn workflow-eventdelivery-timeout
Use below STSADM command to get the current Time Out value:
stsadm -o setproperty -pn workflow-eventdelivery-timeout -pv “15″
Workflow Timer Interval
This setting is applicable at Web Application level and not the farm level. The workflow timer interval specifies how often the workflow SPTimer job fires to process pending workflow tasks. This interval also represents the granularity of delay timers within
your workflow. If a timer is set to delay for one minute, but the interval timer fires only every five minutes, the workflow delays for five minutes, not one minute.
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o getproperty -pn job-workflow -url <Web Application Url>
Use below STSADM command to get the current Workflow Timer Interval value:
stsadm -o setproperty -pn job-workflow -pv “Every 10 minutes between 0 and 30″ -url <Web Application Url>
Here is the url for reference :
http://praveenkasireddy.wordpress.com/2013/06/14/workflow-due-to-heavy-load-the-latest-workflow-operation-has-been-queued-it-will-attempt-to-resume-at-a-later-time/ -
How to Get One MQ Message at a time from MQ Queue
Hi,
Before posting my query here is the configuration I am using:_
Weblogic Server 10.3.3
Soa Server 11.1.1.3.0
Oracle JDeveloper 11.1.1.3.0
Till now I have done the following things:_
1) created an MQ Queue
2) Producing MQ Messages in the Queue with the help of an Asynchronous BPEL process.
I can see the message put in the Queue:
What is my requirement?_
1) I want to read (Get) only one of the above created MQ Messages in the main BPEL process(Synchronous), then needs to process it
And based on my Business condition I have to write that message in the Database.
After successful completion of this instance only my main process should go to consume the next message in the MQ queue.
What is the problem I am facing?_
1) The main BPEL process is not reading one message at a time. I.e. if there are 10 messages in the queue, then as soon as the main bpel process gets deployed, 10 instances created automatically, all in running status and Queue gets empty
2) And if I explicitly test the process, the processes always go in running mode. I.e. Waiting for the messages at the receive activity (this receive is attached to the MQ adapter through operation Get in the main BPEl process)
I just want to know how I can read the MQ messages one by one, though there may be n number of messages in the MQ queue
And only after the completion of the first instance (of Reading First MQ message from queue) it would go to initiate the next instance and so on
Would anyone please help me in this issue?
Thanks
SunilIs the MQ Queue local or remote?
Maybe you are looking for
-
What can i do to get all my stuff back help?
-
HT2731 Problem in creating new Account
I have tried to create a new account and I used my US address and planning to use the iTunes cards, however when I finished filling the data they told me that I cant continue and I have to contact the support to help me with my issue
-
Issue with Sales Views in MM01
Hi gurus, We need to create a material with only views for Basic Data 1&2, and Sales Org. Data 1, Sales Org. Data 2 and Sales General Plant data. The sales organization is created but when trying to assign the material (with existing Basic Data 1&2)
-
Gmail Messages Do Not Load Properly in FF 8.01
After upgrading FF, Gmail messages do not load. Although I can check email and view the message headers fine. The message does come up, theres just no text in the message body. I do not get a security certificate warning but I suspect it has somethin
-
Where do I find the VISA installation drivers to add to my application builder for my LabVIEW app?
I need to add the VISA installation drivers to my LabVIEW application builder, but I don't know where to locate them. (I found the instructions on adding the drivers, but it didn't tell how to find them: http://digital.ni.com/public.nsf/3efedde4322fe