Metadata Navigator installation and Peoplesoft PIA

ODI is used as an ELT to load PeopeSoft data. I would like my client to monitor the processing ODI scenarios from a WEB page.
I would likre to use metadata navigator but I don't understand which kind of server is required to use metada navigator.
PeopleSoft has
-TUXEDO as an Application Server
- WEBLOGIG as an Web Server
What shall I use to run the metadata navigator ?
Thanks for your answers

Shame on me. An answer [ID 970293.1]
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=HOWTO&id=970293.1

Similar Messages

Metadata navigator installation

Hi all,
I have installed Metadata Navigator on OC4j. I also copied the snps_login_work.xml file from my oracledi environment (which is working all right) to the WEB-INF directory.
Now I can start the oracledimn web interface and see the repository login, but when I try and log in I get the following message:
Error detail
# Exception type :
class com.sunopsis.core.g
# Exception message :
# Exception Stack Trace :
com.sunopsis.core.g:
at com.sunopsis.tools.f.c.a(c.java)
at com.sunopsis.tools.f.c.a(c.java)
at com.sunopsis.tools.f.c.a(c.java)
at com.sunopsis.tools.f.c.a(c.java)
at com.sunopsis.security.c.b(c.java)
at com.sunopsis.security.c.b(c.java)
at com.sunopsis.web.login.DwgLogonServlet.a(DwgLogonServlet.java)
at com.sunopsis.web.login.DwgLogonServlet.doPost(DwgLogonServlet.java)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at com.sunopsis.framework.web.filter.DwgLocaleResolverFilter.doFilterInternal(DwgLocaleResolverFilter.java)
at com.sunopsis.framework.web.filter.SnpsOncePerRequestFilter.doFilter(SnpsOncePerRequestFilter.java)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:619)
Any help will be kindly appreciated
Thanks in advance
Brice

Here are my notes for doing this...
Configure Metadata Navigator Connections
Metadata Navigator is installed with default connections. It is necessary to configure the
connections to your repositories in the web application.
To configure Metadata Navigator connections:
1. Configure the connection to the work repository in Designer.
2. Go to your Oracle Data Integrator installation folder's /bin sub-directory.
3. Copy the snps_login_work.xml file from this directory into /WEB_INF sub-directory of theMetadata Navigator deployment folder's.
Point to one snsps_login_work.xml from the ; edit the odiparams.bat file
*** I think you may need to edit the odiparams.bat file. Specifically the Repository Connection Information. Here's mine down to the section you ain't supposed to change... Also, make sure your Java path is defined properly. I hope this helps.
REM #
REM # Copyright (c) 2000-2005 Oracle. All rights reserved.
REM #
REM # PRODUCT
REM # Oracle Data Integrator
REM #
REM # FILENAME
REM # odiparams.bat
REM #
REM # DESCRIPTION
REM # Configuration script. This script contains the parameters for starting
REM # Oracle Data Integrator modules.
REM #
REM # VARIABLES DESCRIPTION
REM #
REM # The following variables should be configured in order to run operations
REM # requiring a repository connection (startscen, agentscheduler, etc.)
REM #
REM # ODI_SECU_DRIVER
REM # JDBC driver used to connect the Master Repository.
REM # ODI_SECU_URL
REM # JDBC URL used to connect the Master Repository.
REM # ODI_SECU_USER
REM # Database account used to connect the Master Repository.
REM # ODI_SECU_ENCODED_PASS
REM # Database account password. The password must be encoded with the
REM # "agent encode <password>" command.
REM # ODI_SECU_WORK_REP
REM # Name of the Work Repository to connect. This Work Repository must
REM # be attached to the master repository.
REM # ODI_USER
REM # OracleDI user used to launch a scenario.
REM # ODI_ENCODED_PASS
REM # OracleDI user password. The password must be encoded with the
REM # "agent encode <password>" command.
REM #
REM # The following variables can be changed to tune OracleDI configuration.
REM #
REM # ODI_INIT_HEAP
REM # Initial java machine heap size used by OracleDI modules.
REM # ODI_MAX_HEAP
REM # Maximum java machine heap size used by OracleDI modules.
REM # ODI_JAVA_HOME
REM # Installation directory of the java virtual machine used for
REM # OracleDI.
REM # ODI_ADDITIONAL_JAVA_OPTIONS
REM # Additional Java options, such as -Duser.language or -Duser.country.
REM # ODI_ADDITIONAL_CLASSPATH
REM # Classpath for additional classes (Windows 95/98/Me Only)
REM # ODI_HOME
REM # Set this environment variable separately. If it is unset, the script can
REM # be launched only from the ./bin directory. If running the setup
REM # program, this variable is automatically set.
REM #
REM # Other variables should be left unchanged.
REM #
rem
rem Repository Connection Information
rem
set ODI_SECU_DRIVER=oracle.jdbc.driver.OracleDriver
set ODI_SECU_URL=jdbc:oracle:thin:@pax401ce032:1523:hypbgprd
set ODI_SECU_USER=ODIM
set ODI_SECU_ENCODED_PASS=hZyp5AYOtb64RVpQKkyv0g
set ODI_SECU_WORK_REP=SIT
set ODI_USER=SUPERVISOR
set ODI_ENCODED_PASS=h2yX6jC5tm6Lw7BdSe5gPg3g
rem
rem Java virtual machine
rem
if "%ODI_JAVA_HOME%" == "" set ODI_JAVA_HOME=%JAVA_HOME%
rem
rem Other Parameters
rem
set ODI_INIT_HEAP=32m
set ODI_MAX_HEAP=256m
rem
rem Additional Java Options
rem
rem set ODI_ADDITIONAL_JAVA_OPTIONS="-Duser.language=en -Duser.country=us"
rem Windows 95,98, Me users only: Any package files added to the /drivers
rem or /lib/scripting directory should be manually declared in the
rem ODI_ADDITIONAL_CLASSPATH variable
set ODI_ADDITIONAL_CLASSPATH=
rem DO NOT EDIT BELOW THIS LINE !
rem ----------------------------------------------------------------------------

Metadata navigator in Sunopsis V3

Hi,
Is metadata navigator available in SunopsisV3, if so give me the URL?
What is the URL for Metadata navigator in ODI?

So I'm now in ODI and moreover I'm in a client office and that's not where I'have installed Metadata but if I remeber well, You don't have to register another Licence cause the modules right are in the same licence than Sunopsis.
I have find this in documentation :
Installing Metadata Navigator
Metadata Navigator is a Servlet/JSP application that enables access to the Repository through a Web interface. This application requires a Web server with a Servlet/JSP container such as Jakarta Tomcat or Oracle Container for Java (OC4J).
Deploying Metadata Navigator
Note: To deploy Metadata Navigator, refer to the documentation of your application server to find the recommended method for deploying a web application from a web application resource (WAR) file or from a set of JSP pages.
To install Metadata Navigator:
1. Insert the Oracle Data Integrator CD-ROM in your CD-ROM drive.
2. To install Metadata Navigator, you may either:
* Use the web application deployment feature of the application server with the oracledimn.war file located in the /setup/manual/ directory on the CD. This solution is recommended for OC4J (Use the Deploy button in the Applications tab).
* if the application server allows it, copy the /oracledimn directory from the CD to the application server's web applications directory (Webapps for Tomcat).
3. Restart the web server hosting the application.
Install the JDBC driver
Metadata Navigator uses the JDBC connectivity to access the database server hosting the Repository to explore. It is necessary to configure the JDBC connectivity on the machine where Metadata Navigator is installed.
The Java classes of the JDBC driver must be copied in the /WEB-INF/lib sub-directory of the Metadata Navigator installation folder, and must have the .jar extension. Rename the file extension to .jar if necessary (e.g., from .zip to .jar). Refer to the installation documentation for the JDBC driver provided with your database for more information.
Configure Metadata Navigator Connections
Metadata Navigator is installed with default connections. It is necessary to configure the connections to your repositories in the web application.
To configure Metadata Navigator connections:
1. Configure the connection to the work repository in Designer.
2. Go to your Oracle Data Integrator installation folder's /bin sub-directory.
3. Copy the snps_login_work.xml file from this directory into /WEB_INF sub-directory of the Metadata Navigator deployment folder's.
--> this file is located in my machine maybe it could help you to find it :
file:///C:/oracledi/doc/webhelp/en/setup/snpsrepexp_setup.htm
For the URL all depend on the web server.
But by editing all the application on it you could retrieve Metadata Navigator.
Ask me if you want more cause I have passed one day to install and test this module......

How to avoid postback while filter document library using metadata navigation filters?

Hi All,
Please help me with this scenario. I have a document library with metadata columns and normal columns and have enabled metadata navigation settings and key filters.
It filters fine. But only problem every time i click the whole page will refresh. is there any way we can avoid page refresh while filtering.
Or
Any alternative solutions also much appreciated.
Thanks for your help in advance.

You're not going to be able to avoid that post back. The pages haven't been designed to allow AJAX behaviour and trying to re-build them would be a monster for MS let alone for you.

How to Install Metadata Navigator and LIght Weight Designer

Hi ,
What is the purpose MetadatNavigator and LWD . ?
Is it mandatory for ODI during Data transfer from source to target.. ?
I have JDK 1.5 installed ......
Any additional hardware specification or requirement needed to Metadata navigator and LWD required.........?
( I saw in the setup document that we require ............J2EE 1.4 compliant application server, such as OC4J 10.1.3 and above. )
Can anyone guide me on this ...........
Data transfer will be a one time activity for my requirement.........
Thanks
AK

The Metadata Navigator and Lightweight designer are not required to move data.
Installation is as described in the Installation documentation, very simple.
The purpose of the two:
Metadata Navigator provides a web-browser based interface to the contents of the repository and execution logs, making it easy to see all the artifacts defined in your repository, see the data flow and data lineage in a graphical form, to see the execution logs, and to be able to start, and re-start the execution of scenarios, from that web-browser.
The lightweight designer gives a web-browser interface to be able to modify mappings defined in your interfaces.

Metadata Navigation and Library Column Filter Bug

To whom it may concern,
When document library metadata navigation is enabled and a user clicks an item in the metadata navigation part, the library updates to reflect the selected filter. Subsequent filtering actions performed on columns in the library do not filter the list
further. For visuals refer to the thread below.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ab5c7d15-14e7-470a-8120-71d049a104d3/list-metadata-navigation-and-columns-filters-not-working?forum=sharepointgeneral
My reason for re-posting this is 2 fold.
1. The answer to the thread above is not an answer, it is a work around.
2. Presenting the option for a user to continue filtering a view, but having that option do nothing is a bug. The option should be hidden, or it should perform the expect action.
Please either inform me of an expected timeframe for resolution, or point me to an exacting set of steps to take in order to escalate this issue to someone who will take action to fix it.
Thanks

Hi,
According to your description, my understanding is that column filtering cannot work after filtering on the managed navigation in SharePoint.
I tested the same scenario per your post in my environment, and I got the same results as you got.
We will help to submit the issue to proper pipeline for you.
Again, thank you for your report which will definitely make SharePoint a better products. There might be some time delay.
Appreciate your time and patience.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Document Library Template with Metadata Navigation and Key Filters

When saving a document library as a template, any configured metadata navigation and key filters columns are lost. Has anyone else experienced this issue or know a viable workaround? Can anyone shed some light on why these settings are not saved with
the template?
Thanks!
Wade Hunter MCP/MCTS - WSS 3.0, MOSS 2007, SharePoint 2010

Wade,
Did you figure out a workaround or why this happens? I am having the same problem.
Thanks

Activating Metadata Navigation and Filtering feature results in no access to Site

Hi
We have found that when this feature is activated all access to the site is lost and users get "Sorry, this site has not been shared with you"
ULS with taxonomy set to verbose:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x800700...
DelegateControl: Exception thrown while adding control 'ASP._controltemplates_15_metadatanavtree_ascx': System.Threading.ThreadAbortException:
Thread was being aborted.
Deactivate the feature and access is restored. Note we have just deployed the Dec 14 CU but this does not happen on our Staging site which also has the Dec 14 CU
Any ideas? Obviously users want to enable this feature!
Cheers
J

Hi，
For your issue, maybe the permissions for the Portal Super User and Portal Super Reader were not correctly positioned on the web application policy:
You need to add Portal Super Reader account with Full Read permissions on the web application policy and you could access site pages even when Metadata Navigation Filtering was activated.
You need to addPortal Super User account with Full Control permissions on the web application policy and you could create the new site collection, access site pages even when Metadata Navigation Filtering was activated.
Refre to the following article about creating the user accounts by using Central Administration:
https://technet.microsoft.com/en-us/library/ff758656.aspx
Best Regards，
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

List metadata navigation and columns filters not working.

Hi
I'm having an issue with SP 2013 whereby if I apply a filter through metadata navigation subsequent columns filters don't get applied.
Here I've applied a filter through the navigation and it applies the filter successfully to the documents in the library
If I now apply a column filter by content type and select the value Promotion Calendar, I get the following
It appears the filter is selected and I can indeed see the filter applied via the dropdown but it doesn't apply the filter to the list view. I've confirmed this also on another environment using different columns for the metadata navigation.
The environments are patched to Dec 2013 CU.
Thanks

Hi
Matt Williams3 ,
The scenario is be default that Managed Metadata navigation tree in document libraries does not allow further filtering on other columns.
For a workaround, you can use Key Filters instead.
For more information, you can refer to the blogs:
Set up metadata navigation for a list or library
How to Use Metadata Navigation and Filtering in
SharePoint 2013
Reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/78881468-308d-4305-8454-c67fceb05fea/managed-metadata-navigation-tree-in-document-libraries-does-not-allow-further-filtering-on-other?forum=sharepointsearch
Best Regards,
Eric
Eric Tao
TechNet Community Support

Metadata navigator and agent

Hi
I have a question on Metadata Navigator.We are trying to install Metadata Navigator in a 64 bit server. But our agent is running in a 32 bit server.. So when we run a scenario using Metadata Navigator can we select which agent it has to use. We dont have M.N yet. So it could a basic question.
-app

Hi,
That shouldn't be a problem.
As far as I know will work fine.
Cezar Santos
[www.odiexperts.com]

MultiServer peoplesoft PIA Domain doesnt start; failed to bind, port in use

Multi Server PIA Domain does not start (failed to bind, port in use)
Default (Peoplesoft) PIA multi server domain installation;
After the setup we cannot start PIA and both PIA/ PIA2 cluster. One of them fails with error message about port conflict, port already in use.
I 've been installing this kind of PIA's many times before. But this is the first install with Peopletools 8.49.19 and BEA Weblogic 9.2 mp3, P4.
To bypass the problem we have NOT started the PIA1, PIA2 "servers" But that is a unwanted situation. Reinstalling and reconfiguring did not help.
The odd thing is that on all previous installed PIA’s for different tools versions and peoplesoft applications we run here (on different servers) we do not run into the same errors. I am quite sure that on those servers where it works fine we only use port 443 for both PIA, PIA1 and PIA2.
Since it’s not the port, I expect it the listen address to be the cause. I played around with IP address, fqdn, ip 127.0.0.1 (for PIA2 only) but nothing seems to work as the previous installations.
web PIA multi server domain
I start in sequence:
startWebLogicAdmin.cmd
startManagedWebLogic.cmd PIA
startManagedWebLogic.cmd PIA1 and
startManagedWebLogic.cmd PIA2
the admin is running and the console can be reached.
the PIA just starts fine (running) zie log below (PIA_log)
when staring PIA1 it shuts down hust before comming up.
<26-jun-2009 21:38:58 uur CEST> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "DefaultSecure". The address 10.1.70.76 might be incorrect or another process is using port 443: java.net.BindException: Address already in use: JVM_Bind.>
<26-jun-2009 21:38:58 uur CEST> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "Default". The address 10.1.70.76 might be incorrect or another process is using port 80: java.net.BindException: Address already in use: JVM_Bind.>
<26-jun-2009 21:38:58 uur CEST> <Emergency> <Security> <BEA-090087> <Server failed to bind to the configured Admin port. The port may already be used by another process.>
<26-jun-2009 21:38:58 uur CEST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason: Server failed to bind to any usable port. See preceeding log message for details.>
<26-jun-2009 21:38:58 uur CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<26-jun-2009 21:38:58 uur CEST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<26-jun-2009 21:38:58 uur CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>

Hi there. We solved the issue by adding a second IP address to the same NIC and filled in all listen addresses accordingly in the BEA admin console. This did not answer the initial behavior but is a BEA advised solution in a multi server configuration. I am still very much interested in the cause of the behavior change between 8.1 and 9.2 since adding a second IP address is a more costly solution which was NOT necessary in weblogic8.1
Detlev

Sharepoint 2013 Public Facing Website With Managed Metadata Navigation on Office365 E3 Trial Online

Warning: I am a complete novice in sharepoint
I have subscribed to office365 online trial Enterprise edition to learn sharepoint
I have created a Public facing Website
Through the site-collection setting -> navigation created a new metadata group named navigation and chose it for global and current menu(I switched on the publishing service)
Under the term Management I added two sub terms(for navigation group) with links to document and home.aspx
The team site immediately showed the global menu with only two options(home and document) as needed
Unfortunately the public facing site did not show any such options and instead showed a different menu(default one)
I tried to add the navigation snippet to the master page and it showed the same default menu.
The public site has no navigation option in Site setting either
QUESTION: How can I get managed navigation in public facing site? Is it possible or it is not allowed?

Hi,
According to your post, my understanding is that you wanted to use the Managed Metadata Navigation in Public Website.
Per my experience, we could not use the managed metadata navigation in public website, it is only available for the internal site collections.
For more information:
http://community.office365.com/en-us/forums/154/t/166500.aspx
You can refer to the following article to know the public website and internal site collections on Office 365.
http://blogs.sharepoint911.com/blogs/jennifer/Lists/Posts/Post.aspx?ID=76
As this is the forum for the SharePoint server, , I’m not sure whether it supported managed metadata navigation now.
I recommend you can post your question to the forum for SharePoint Online:
http://community.office365.com/en-us/forums/154.aspx.
More experts will assist you, then you will get more information relation to SharePoint Online.
Thank you for your understanding and support.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Users with read access to the site unable to view Managed Metadata Navigation

Hi everyone,
I created a Managed Metadata service and created group, term-set and terms
I gave read access to users
I set up navigation to use Managed Navigation
I am logged in as farm admin and able to view the navigation when i browse site. But user are not seeing navigation.
One thing i noticed is when i give users full access or designer access to site they will be able to see the navigation. but i don't want to give users full access or designer access to the site.
How can users with read only access to site can view Managed Metadata Navigation...Please help?

Hi Sunil,
Have you given your users permissions to actually read the MMS data from the service application?
http://technet.microsoft.com/en-us/library/ff625176.aspx covers permissions on the MMS.
Regards
Paul.
<<edit>> On reflection you might be hitting the issue in this Stackexchange post..
http://sharepoint.stackexchange.com/questions/75636/permissions-and-managed-metadata-in-navigation Is yours behaving the same way?
Please ensure that you mark a question as Answered once you receive a satisfactory response. This helps people in future when searching and helps prevent the same questions being asked multiple times.

Managed Metadata Navigation not showing to users

I created a Managed Metadata service and created group, term-set and terms
I gave full access to application pool service account. read access to all the users via AD Security Group.
I set up navigation to use Managed Navigation (Managed Metadata Service).
I am logged-in as farm admin and able to view the navigation when i browse site. But user are not seeing navigation.
i went to the hidden taxonomy list and gave read access to all users. but this didn't help.
One thing i noticed is when i give users full access or designer access to site they will be able to see the navigation. but i don't want to give all users full access or designer access to the site.
Am i missing anything here? Please help!!!!

Hi prakasnh,
According to your description, you have created a Managed Metadata service and created group, term-set and terms, but the users who have read access, were not seeing the navigation.
How did you grant the read access to the users? By a group or directly?
For resolving your issue, please add the users to the site Visitor group, and compare the result.
Here is a similar post for you to take a look at:
http://social.technet.microsoft.com/Forums/en-US/d2aa85e1-93e0-4e12-8389-28e13b11e877/managed-metadata-navigation-permissions-issue?forum=sharepointadminprevious
I hope this helps.
Thanks,
Wendy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Is there an avilable Fix for the Managed metadata navigation Bug in sharePoint 2013

I am facing this bug on my "Publishing Site ---> enterprise wiki Template" inside SharePoint server 2013. and when i tried to specify the target page manually as mentioned in this link it did not work also.
http://sadomovalex.blogspot.com/2013/04/managed-metadata-navigation-and_21.html
So i would like to know if SharePoint has applied any fix this this Big?
BR

Hi john,
For this issue, I can reproduce it in my test team site, I haven’t seen the CU update includes this issue.
So, I would suggest you to use the workaround, set a friendly url for the subsite in the term store management settings page as described in the blog.
Thanks,
Qiao Wei
TechNet Community Support

Metadata Navigator installation and Peoplesoft PIA

Similar Messages

Maybe you are looking for