Metadonnées EXIF

Comment afficher toutes les métadonnées EXIF dans LR5? En mode Bibliothèque, le pavé métadonnées n'affiche que 18 paramètres, alors que l'inspecteur de l' APERçU Apple donne 44 paramètres EXIF (en format raw)...  par exemple la balance des blancs n'apparaît pas dasn LR5,  et c'est un paramètre utile.
Pour mémoire, ci après la liste des 44 métadonnées fournies en RAW par Aperçu :
Valeur d’ouverture: 7
Numéro de série du boîtier: 063025006761
Nom du propriétaire de l’appareil photo: 063025006761
Espace colorimétrique: sRVB
Configuration des composants: 1, 2, 3, 0
Rendu personnalisé: Processus standard
Date et heure de numérisation: 13 avr. 2014 15:35:46
Date et heure d’origine: 13 avr. 2014 15:35:46
Version EXIF: 2.3
Valeur d’angle d’exposition: 2
Mode d’exposition: Exposition automatique
Programme d’exposition: Priorité d’ouverture
Temps d’exposition: 1/80
Flash: Désactivé, ne s’est pas déclenché
Version FlashPix: 1.0
Ouverture numérique: 11
Longueur focale: 70
Unité de résolution du plan focal: pouces
Résolution du plan focal X: 3 810,585
Résolution du plan focal Y: 3 815,9
Sensibilité photographique (ISO): 640
Modèle d’objectif: EF70-200mm f/4L IS USM
Numéro de série de l’objectif: 0000809fd6
Spécifications de l’objectif: 70, 200, 0, 0
Valeur de l’ouverture maximale: 4
Mode de mesure: Motif
Dimension X en pixels: 5 472
Dimension Y en pixels: 3 648
Type de saisie de scène: Standard
Valeur de la vitesse d’obturateur: 6,375
Temps inférieur à la seconde: 43
Temps inférieur à la seconde numérisé: 43
Temps inférieur à la seconde d’origine: 43
Balance des blancs: Balance des blancs automatique
AFInfo: 0.2836258, 0.486568, 0.01498538, 0.02686404, F, 0.3925439, 0.5825109, 0.01498538, 0.02686404, F, 0.3925439, 0.486568, 0.01498538, 0.02686404, F, 0.3925439, 0.390625, 0.01498538, 0.02686404, F, 0.4910453, 0.6233552, 0.01790936, 0.02083333, s, 0.4890351, 0.4825932, 0.02192982, 0.0348136, F, 0.4910453, 0.3558114, 0.01790936, 0.02083333, F, 0.5924708, 0.5825109, 0.01498538, 0.02686404, s, 0.5924708, 0.486568, 0.01498538, 0.02686404, s, 0.5924708, 0.390625, 0.01498538, 0.02686404, F, 0.7013889, 0.486568, 0.01498538, 0.02686404, F
Programme interne: Firmware Version 1.1.3
Compensation du flash: 0
Mode centré: 1
Stabilisation de l’image: 3
ID de l’objectif: 242
Informations sur la lentille: 70, 200, 0, 0
Modèle d’objectif: Canon EF 70-200mm f/4L IS
Numéro de série de l’objectif: 0000809fd6
Numéro de série: 063025006761

Sur la gauche de votre panneau Metadonnées, vous avez sélectionné exif et iptc, et il vous en manque encore, du coup, je suppose que ce petit plugin devrait vous dépanner ou celui-ci.
La question est soulevée sur feedback.photoshop.com et je vous laisse voter pour les idées les plus pertinentes. Parmi les réponses des équipes de développement, une très explicite est de bien expliquer quelle méta-donnée vous souhaiteriez voir exposée et pour quelle raison, afin d'appuyer votre demande d'exemples et d'utilisation réels et lui donner plus de poids.

Similar Messages

  • Problem creating a 'used sources' list based on EXIF data in InDesign CS5

    Hello everyone,
    I recently started to use InDesign CS5 to work on school projects. These projects regularly require us to have a list of sources, not only for citations and referenced work, but also for images. As I sometimes make quite long documents, keeping track of what image is where, and where I got it from, gets tedious.
    I had the idea of generating a caption based on EXIF data, which I'd move to the pasteboard, and group it with the image. The text in the caption has a seperate, numbered paragraph style. On one of the last pages, I generate a table of contents, which the numbered paragraph style selected. I chose to display it using another paragraph style, without page numbers.
    What I want to have as the end result is:
    Table of contents
    1. <Title>. <Author> (<Creation Date>). Retrieved <Date Placed> through <Description>
    The captions display correctly, as shown above in the body of the table of contents. The table of contents itself however, shows only the numbering in front of it, and not the variables.
    I already tried converting the live captions to static captions, but that doesn't work. Does anyone have an idea how to solve this?

    Hello everyone,
    I recently started to use InDesign CS5 to work on school projects. These projects regularly require us to have a list of sources, not only for citations and referenced work, but also for images. As I sometimes make quite long documents, keeping track of what image is where, and where I got it from, gets tedious.
    I had the idea of generating a caption based on EXIF data, which I'd move to the pasteboard, and group it with the image. The text in the caption has a seperate, numbered paragraph style. On one of the last pages, I generate a table of contents, which the numbered paragraph style selected. I chose to display it using another paragraph style, without page numbers.
    What I want to have as the end result is:
    Table of contents
    1. <Title>. <Author> (<Creation Date>). Retrieved <Date Placed> through <Description>
    The captions display correctly, as shown above in the body of the table of contents. The table of contents itself however, shows only the numbering in front of it, and not the variables.
    I already tried converting the live captions to static captions, but that doesn't work. Does anyone have an idea how to solve this?

  • How can I change exif data in images?

    I've been poking around the interent looking for an answer to no avail.
    I want to edit a lot of image exif / metadata but I cannot figure out how to do it. iPhoto allows me to edit the time but not the embedded info. When I used a PC all I had to do was right click and select properties and I could edit a myriad of info in the image. Not so easy with the iMac. I know how to view the data within finder (command I), but this does not allow me to edit what I want.
    Please don't tell me it's a bad idea to do this. I know it is. I don't want it for all my photos, just the things I put on the internet for public display. This 100% due to privacy issues and other personal reasons.
    I was told that opening a terminal and simply typing "exiftool" (without quotes) would yeild the results I'm looking for, but that only returned a command not found error. I'm sure I did that wrong.
    Anyone know of a solution?

  • Is there a way to use EXIF information from images in Muse?

    I use Lightroom to manage my images. In Lightroom, I enter Caption metadata. (In the Lightroom Library, I enter data in the Caption field of the Metadata section.) Now I'd like use that Caption data to create an ALT tag in Muse. Is there any way to do that, short of copying the text from Lightroom and pasting it into Muse?
    Here's why that wouldn't work for me. I have hundreds of images on my site. When I export images from Lightroom for my Muse site, I rename them. The names are generated by LR, so they're not consistent each time I generate them. Over in muse, that means I have to re-enter ALT tags every time I generate a new version of my slide show -- even if the images are the same. So what I'm looking for is a way to have Muse take the Caption data from each image's EXIF Metadata and use it to generate the ALT tag.
    Can anybody think of a way to do this?
    Thanks,
    Jonathan

    Unfortunately there is no way to do that current stage , you would need to add the tags manually.
    Thanks,
    Sanjit

  • Can you automatically embed Exif data in DNG files LR4

    For years I have been using Bridge and ACR for my raw workflow. I use only DNG files and have the database turned off so the EXIF data is embedded right into the original DNG file. This means my files are 100% portable without and sidecar.
    Can I work with lightroom 4 without having a database? OR can I assure that each DNG file has all it's setting automatically embedded as it does in Bridge?
    Thanks,
    Tom

    In the catalog settings, metadata tab, there is an option to automatically write to XMP.  That should do what you want.  Since there is no sidecar file with the DNG file exif data will be written to the file. 

  • Does PSE11 show HDR exif data for a Canon 5D Mark III?

    I have taken some pictures with the HDR feature on my Canon 5D Mark III. The HDR image that the camera creates does not show that it was created using the camera's HDR feature when viewed with PSE11. The Canon Software that came with my camera is ImageBrowserEX 1.4.0 and it shows these data: HDR Shooting Enable, Adjust dynamic range +-2, HDR Effect Natural, Auto Image Align Enable. Is there a way to show the HDR exif in PSE11? Thanks, Anne

    Thanks -- I should have mentioned in my original question that I had already looked at File>Info. The usual stuff is there but nothing about the image being created from the HDR camera function, or at least that I could see. I went through all the tabs including Advanced and just don't see it. I will try to figure out how to ask Adobe Technical Support and how to request that they get that info included if it's not there. Anne

  • Photoshop not seeing lens model in exif data from A3 export

    Hi, I am trying to use the lens correction features in CS5 but the lens type can't be read in the exif data of an image I've exported from A3. It sees the focal length and body type. The lens type is listed in the Metadata Inspector in A3. I took the image into iPhoto and checked "extended photo info" and the lens type isn't there either. This happens with at least 2 lenses. One prime and one zoom. Any ideas?

    Hi again
    Having played with metadata a bit more, it is possible to include EXIF data for the lens size etc.. eg...EF300mm f2.8L IS USM But it doesn't append the manufacturer's name, eg I use Canon, yet 'Canon' is not appended to the Lens data like it is to the camera name..
    In the library Inspector click > Metadata > where it says 'General' click the down arrow, then click > Edit > from the window that appears click > EXIF > from the drop down list click > Lens (scroll down a bit)
    The lens you used will now be appended to your data.
    I have not tried exporting this to Photoshop so maybe you could post back if its possible to export this data to PS or not.
    Maybe someone has information on this and can chip in here with advice....
    Hope this is helpful....... Gerry....
    PS to all reading this, I also noticed while playing around with this ( I have not delved into metadata too much since Ap2) that all my personal details like mobile number, address, email etc are all appended by default, I imagine my address book info has been used here.
    A useful feature indeed while selling photo's, or if you intend it to be there..... but not so good if you are not aware it's there in the first place.....!
    Just a shared thought to whom it may concern....... Gerry.
    Message was edited by: windhoveruk

  • How can I see the entire image date in Metadata EXIF DD/MM/YY?

    I cannot see the full image date under metadata EXIF, just the day and month. Could you help me to see the year the picture was taken? Thanks a lot.

    Where are you not seeing the full date information?  If it is on one of the Browser Metadata Overlays, you may have to increase the size of the thumbnails or remove some of the other data being shown (and/or the metadata labels).
    On my Metadata Overlays for Browser, Viewer, and Tooltip, as well as on the Metadata tab of the Inspector, the full date-time stamp is shown, e.g.:
    10/26/11  4:23:41 p EDT

  • In iPhoto 11 changing the Date and Time EXIF becomes Garbage?

    Hi- the new photo date I choose for a photo (say 1946) turns into garbage after saving - like 1165 or 1492- ( and Columbus would be suprised).
    Detail: About 5 years ago in Windows PC in  XP folders  I scanned old family pics into folder for 1946 and all was well= until few months back in 2011 I crossed over to Mac Book Air and  iPhoto 11.
    However iphoto  doesnt care for file name- Its sorts all in event date based on scan date- exif date-  embedded by the scanner when I did it. OK. Smarter.
    So to change its date I select each photo in iphoto11- then  select "change date" and changed the date what I want it to say (like   06/06/1946) - and saved .
    Problem. Now it has two dates against it - one date in year 1492 and the other in 1765- .
    I have tried changing the date differently using  the little Up or Down arrows, and its scrolls (eventually!) to 1946 -I  do a save..... and another crazy date turns up-
    Am guessing so its got to be a trick related to the " day counter"- mind you I dont see the pint of telling me that my photo is having its date changed by some quantity of thousands of days- Doh that sounds very Windows like.
    I must be doing it wrong.
    Any experts please?
    Thanks in advance !

    Thanks AppleMan1958, you're right.
    My view was set to Favorites and Unmarked so when I imported the video, rejected parts of it, and THEN changed the date I was unable to see that I wasn't changing the date on the rejected portion. I changed the view to All Clips (in the View menu) and then I could plainly see that the rejected clips still had the current date.

  • Removing EXIF and other Metadata from iPhoto 5 Library

    This post is intended for users who have upgraded to iPhoto5 and have suffered extensive slowdowns because of metadata that has accumulated in their iPhoto library, specifically in the Library.iPhoto file.
    This occurs if certain Pentax, Canon, and other digital cameras are used for pictures. Search this forum for "metadata" or "EXIF" or "makernote" (no quotes) for additional information about this issue.
    If you are affected by this issue and want to rid your iPhoto 5 library of this extra garbage, follow the steps below.
    1. Make two copies of your complete iPhoto Library folder and put them someplace else other than in the normal location. If something goes wrong, you'll have the backups. In any event, understand that if you follow these instructions, you are responsible for any problems, errors, or loss of photos. If you aren't prepared to take that responsibility, then do not read any further.
    2. Go to http://www.versiontracker.com and search for and download the free SmallImage application. Install it in your Applications folder.
    3. In your original iPhoto library, trash the Library.iPhoto file.
    4. Launch SmallImage by dragging your entire (ORIGINAL) iPhoto Library folder on top of SmallImage.
    5. There are 5 categories (checkboxes) of metadata (called profiles) that you can eliminate. I selected them all. Uncheck the "Recompress at quality:" checkbox. You don't want your photos altered. Uncheck the "Add Suffix" checkbox so that SmallImage will overwrite your photos with ones without the metadata. Select whether you want keep any custom file icons or not. Then, hold your breath and push the "Process Files" button in the SmallImage toolbar. If you have thousands of photos and/or a slow computer, it might take many hours.
    6. When SmallImage is finished, lauch iPhoto5, holding down the command/apple, option and shift keys. Before iPhoto fully loads, you'll be presented with the library rebuilding dialog box. Check ALL 4 options (especially the last one) and then allow iPhoto to rebuild the library. This also can take a very long time, depending on computer speed and the number of photos you have. When iPhoto is finished rebuilding the libary and reloading your photos, you'll have an iPhoto library without any the metadata that seems to be slowing it down. If you hold down the wrong keys and don't get the library rebuilding dialog box, don't panic. Quit iPhoto, and try it again. Your photos are still there.
    7. If you stay with your current camera (that is generating the metadata), manually transfer your picture files to your computer (but not directly into iPhoto) and use SmallImage to remove the metadata BEFORE you manually import them into iPhoto5.
    Hopefully, future versions of iPhoto5 will include an import option to strip metadata from photo files. If SmallImage can do it, why can't our favorite fruit company?
    Best of luck.
    12 inch 1.5Ghz Powerbook Mac OS X (10.4.3)
    12 1.5Ghz Powerbook   Mac OS X (10.3.9)  

    Link the two Macs together and use iPhoto Library Manager
    Regards
    TD

  • Problems with InDesign CS5 reading EXIF data

    Hi there - my first post.  Been searching all over for a solution but no one else seems to have this problem.
    I'm trying to create a picture book using InDesign and have JPEG's loaded in direct from many cameras (HTC, Canon etc.)
    I'm creating captions using either Live Caption or manually to show the description and exposure details.
    InDesign can always read the caption and tags (if it's been set by Picasa in the IPTC tag) but it never shows the EXIF camera details - it just shows <No data from link>.   In the links section if you right click on the image and open XMP File Info you can see all the EXIF info is there.
    Even dragging images from Bridge does not help.
    The only way I can make InDesign read them is to get Adobe Bridge to modify the image by completing a random IPTC field.  Bridge won't let you modify EXIF, so presumably that does not get changed, so why that helps I do not know.
    Is there any way to get InDesign to read EXIF's first off?
    Thanks, Simon

    It's been a long time since I looked at this.  While I was able to solve the problem using EXIFTOOL to process that JPEG files (and write XMP) I decided against including the metadata into the InDesign book as it would mean processing all my images, and having to remember to process any new photos I take.  Book is behind schedule so I cut it all out.
    I changed the code that was submitted by John, and made the following .bat file that sits in the same folder as EXIFTOOL.  The .bat files contains:
    %0\..\exiftool.exe -overwrite_original -TagsFromFile %* -@ exif2xmp.args %*
    pause
    In order for this to work, you need the exif2xmp.args file.  I didn't know where it was supposed to be located but put it in the same dir as EXIFTOOL and the bat file above and it worked.  I got the file somewhere from the EXIFTOOL website - think its in the full archive that they provide.
    To use it, you can drag multiple files onto the .bat file in Windows and they are processed.  N.B. this overwrites the original photos, so make a backup if you are unsure.

  • What are the forensic limitations of Metadata & Exif Data+ Adobe Photoshop 3 question; e.g. Metadata

    I have some questions regarding metadata, and exif data on digital   cameras and its forensic limitations in Adobe photoshop 3;
    For  instance; After a picture is taken and has a metadata/exif digital   stamp of the "picture being taken day" under what circumstances can  that  "picture being taken day" be changed?
    Does the picture  being taken day change when you import it into adobe  photoshop 3 and  add a caption?
    Does it change only when the picture is edited,  to perhaps add a white  sidebar that says "family photo" or whatever?
    Under what circumstances does the exif/metadata digital time stamp  of  the "picture being taken day" change?
    Also, is it possible  to change the picture being taken day on a  photograph in adobe  photoshop 3 manually?
    Thanks-
    Phil

    I guess it would be easier to give you an example. The above picture shows the exif data as 9.11.2001. How is this possible if this is a 911 victim? In the top metadata, it says Adobe photoshop 3. I assume this is the program it was last edited in? Or was adobe software used exclusively in cameras back then perhaps? I am not sure, I just know I have many questions I really want answers to. Was the exif data changed perhaps in the above photo on 9.11.2001 to add that white sidebar, which says (Family photo) ?? Click the image below to see the screenshot of what I am looking at, this way we are on the same page or picture so to  speak.
    Any help you can give will be greatly appreciatted...
    Thanks,
    Phil

  • How to copy EXIF data for a single photo?

    Hello,
    I post photographs to a few different photo forums for community comment and critique. Including the basic technical data for each photograph is common and having to type it in manually is tedious. Is there a quick and easy way to copy or extract basic EXIF data (exposure, focal length, EV, ISO, exposure program, metering, make, model, lens) for a single photo to the clipboard? The information is all over LR I just can't determine how to get it out quickly.
    Thanks for your help!
    Best,
    Eric

    I don't see anyone provided you with an answer.
    The hard way is to export the metadata to the file and use an external program. There are many programs that manipulate metadata. I haven't wanted to export it in the way you describe.
    What operating system are you on?

  • Please add support for JPEG Exchangeable Image File Format (EXIF)

    It seems that now Adobe® Illustrator® can export only to the JPEG File Interchange Format (JFIF). We should have an option to produce the JPEG Exchangeable image file format (EXIF) as well (just like Photoshop does!). Why this is so important to me? I generally work under Illustrator and I often post my work on Behence. I work with 'sRGB IEC61966-2.1' color profile. When publishing I use *.jpg with embedded ICC Color Profile. But it looks like Behence doesn’t fully support the JPEG JFIF – for example it cannot read its icc data correctly. The effect is that my work looses its quality! The only option to produce the JPEG EXIF I have now is to: Export *.ai file to JPEG (under Adobe Illustrator) > go to Photoshop > Create new project > Paste the *.jpg > and Sava As JPEG with icc embedded. This guarantees my files are being processed correctly.
    (JPEG) Formally, the EXIF and JFIF standards are incompatible. This is because both specify that their particular application segment (APP0 for JFIF, APP1 for Exif) must be the first in the image file. In practice, many programs and digital cameras produce files with both application segments included. This will not affect the image decoding for most decoders, but poorly designed JFIF or Exif parsers may not recognize the file properly. ( http://en.wikipedia.org/wiki/JPEG_File_Interchange_Format#Exif_comparison )
    I’ve analyzed my files using JPEGsnoop 1.6.1 (an app by Calvin Hass, http://www.impulseadventure.com/photo/) and here is the result:
    A) an *.jpg file produced with Adobe Illustrator > File > Export > JPEG > ICC profile embedded:
    *** Marker: SOI (xFFD8) ***
    OFFSET: 0x00000000
    *** Marker: APP0 (xFFE0) ***
    OFFSET: 0x00000002
    length     = 16
    identifier = [JFIF]
    version    = [1.2]
    density    = 72 x 72 DPI (dots per inch)
    thumbnail  = 0 x 0
    B) an *.jpg file produced with Adobe Illustrator > File > Save For Web > JPEG > ICC profile embedded:
    *** Marker: SOI (xFFD8) ***
    OFFSET: 0x00000000
    *** Marker: APP0 (xFFE0) ***
    OFFSET: 0x00000002
    length     = 16
    identifier = [JFIF]
    version    = [1.2]
    density    = 100 x 100 (aspect ratio)
    thumbnail  = 0 x 0
    C) an *.jpg file produced with Adobe Photoshop > File > Save As > JPEG > ICC Profile embedded
    *** Marker: SOI (xFFD8) ***
    OFFSET: 0x00000000
    *** Marker: APP1 (xFFE1) ***
    OFFSET: 0x00000002
    length          = 1320
    Identifier      = [Exif]
    Identifier TIFF = 0x[4D4D002A 00000008]
    Endian          = Motorola (big)
    TAG Mark x002A  = 0x002A
    EXIF IFD0 @ Absolute 0x00000014
    Dir Length = 0x0007
    [Orientation ] = Row 0: top, Col 0: left
    [XResolution ] = 720000/10000
    [YResolution ] = 720000/10000
    [ResolutionUnit ] = Inch
    [Software ] = "Adobe Photoshop CC 2014 (Windows)"
    [DateTime ] = "2014:08:02 17:21:15"
    [ExifOffset ] = @ 0x00A8
    Offset to Next IFD = 0x000000D4
    EXIF IFD1 @ Absolute 0x000000E0
    Dir Length = 0x0006
    [Compression ] = JPEG
    [XResolution ] = 72/1
    [YResolution ] = 72/1
    [ResolutionUnit ] = Inch
    [JpegIFOffset ] = @ +0x0132 = @ 0x013E
    [JpegIFByteCount ] = 1006
    Offset to Next IFD = 0x00000000
    EXIF SubIFD @ Absolute 0x000000B4
    Dir Length = 0x0003
    [ColorSpace ] = sRGB
    [ExifImageWidth ] = 200
    [ExifImageHeight ] = 200
    Regards,
    Pawel Kuc

    This is a user-to-user forum and is not monitored by Apple for feedback purposes. You can give feedback to Apple here: Apple - Mac OS X - Feedback

  • Embed original filename in EXIF

    I'm looking for a way to embed the name of an image file in the EXIF data inside a jpeg. Ideally I would like to see that as an option in Aperture when importing images. Here is why I believe this is a very useful feature for photographers.
    I have tens of thousands of photographs on my computer. I often take one, or a few, or a set, and process them for some specific purpose. I often rename the files to represent the occasion. At some later time I want to find the original and rework it, but because I renamed it I can't find it easily. My originals, with their original file names are stored doubly backed up on separate hard drives. So if I could look at the processed image's EXIF data and extract the original file name after which it's fairly easy to find the original.
    Actually it would be nifty to specify one or more processed files and automatically search for the original (given perhaps a clue where these might be stored)
    Is there a way?
    I generally use EXIF Viewer to look at the EXIF data and I don't see the original file name. Similarly in Aperture.
    Thanks,
    Pete

    Terrence,
    I understand that Aperture manages photos. But, photos and derivatives of photos are used in many ways outside of Aperture. For example, you can publish them in galleries on the Internet using other software besides Aperture. Say a friend asks for a full copy of a particular image that he or she saw I would like to find the original quickly. I can think of various work flows and file tagging schemes, but they all require a lot of work and a lot of organization. Writing the filename used upon import into Aperture automatically into the title tag of the EXIF would be of immense value to me and I believe a lot of other photographers.
    Thanks,
    Pete

Maybe you are looking for