Metainit error - overlaps with device in metadevice state database

I have successfully mirrored 3 of 4 partitions on a new install but am having trouble with the last one. It is the swap partition. There are the usual steps I follow:
SWAP (slice 1):
1. metainit -f d11 1 1 c0t0d0s1
2. metainit d12 1 1 c0t8d0s1
3. metainit d10 -m d11
4. edit the /etc/vfstab
5. reboot
6. metattach d10 d12
After step #1, I get the following error:
metainit: tpssol2: c0t0d0s1: overlaps with device in metadevice state database
I check metastat and all the config files and don't see anything wrong.

What platform is this? SPARC or X86 and OS version. This normally happens after a rebuild and you get 2 disk devices with the same ID.
#iostat -Ei
This will display your disks and IDs. If the match, you will need to do the following (this should applies for physical and virtual servers, but I have only tested it on VMware) in this example c1t0d0 and c1t1d0(secondary) are the disks with matching IDs.
#iostat -Ei
this shows 2 disks with the same ID
#cfgadm -al|grep c1t
c1::dsk/c1t0d0 disk connected configured unknown
c1::dsk/c1t1d0 disk connected configured unknown
#cfgadm -c unconfigure c1::dsk/c1t1d0
#cfgadm -al|grep c1t
c1::dsk/c1t0d0 disk connected configured unknown
c1::dsk/c1t1d0 disk connected unconfigured unknown
#iostat -Ei
this shows now only one disk
from within VMWare manager remove the secondary disk and add it back again!
#cfgadm -c configure c1::dsk/c1t1d0
#cfgadm -al|grep c1t
c1::dsk/c1t0d0 disk connected configured unknown
c1::dsk/c1t1d0 disk connected configured unknown
#iostat -Ei
this now showed a new disk with a unique disk ID.
#fdisk /dev/rdsk/c1t1d0p0
Y to the prompt to create Solaris 100% prompt
#prtvtoc /dev/rdsk/c1t0d0s2|fmthard -s - /dev/rdsk/c1t1d0s2
#metadb -af -c4 c1t0d0s7 c1t1d0s7
Success! You can now setup your mirroring.
Edited by: readlee on Sep 17, 2008 7:06 AM

Similar Messages

slice overlaps with device in metadevice state database

bash-3.00# metadb
bash-3.00# newfs /dev/rdsk/c0t1d0s7
newfs: construct a new file system /dev/rdsk/c0t1d0s7: (y/n)? y
Warning: 784 sector(s) in last cylinder unallocated
/dev/rdsk/c0t1d0s7: 103664 sectors in 17 cylinders of 48 tracks, 128 sectors
50.6MB in 2 cyl groups (13 c/g, 39.00MB/g, 18624 i/g)
super-block backups (for fsck -F ufs -o b=#) at:
32, 80032,
bash-3.00# metadb -ac3 /dev/dsk/c0t1d0s7
bash-3.00# metadb
flags first blk block count
a u 16 8192 /dev/dsk/c0t1d0s7
a u 8208 8192 /dev/dsk/c0t1d0s7
a u 16400 8192 /dev/dsk/c0t1d0s7
bash-3.00# metainit d20 1 1 /dev/dsk/c0t1d0s0
metainit: unknown: c0t1d0s0: overlaps with device in metadevice state database
bash-3.00# metainit -f d20 1 1 /dev/dsk/c0t1d0s0
metainit: unknown: c0t1d0s0: overlaps with device in metadevice state database
bash-3.00#
I get the same result using raw devices.
The root device is on slice 6 ; this slice being an LU Boot Environment.
I'm stuck now.Any ideas?
I'll eliminate the non allocated sectors and try again.
Edited by: plasmichive on Nov 11, 2009 3:11 AM

Sorry folks. I had failed to check the placing of slice 7... which I had assumed would be placed in the highest cylinder numbers... however, I used a "custom install" facility, which had placed them somewhere else... I failed to notice when I repartitioned the disk.
The filesystem which I "newfs"ed a little chunk out of was blank anyway.
Off to try to bite a chunk out of an operational filesystem now.... idle hands...
Edited by: plasmichive on Nov 11, 2009 3:35 AM

Initial Print jobs 'communication error with device'. Pause and restart job

So, I have an odd variant of the Leopard print problem; on 3 separate systems.
When I print to an HP Photosmart C7180, which setup fine, which I can scan to fine, the print job throws an error :error communicating with device, switch on and off' and so forth. It does that from any app, and consistently. I am printing via bonjour, the printer is networked, but on a static IP.
To fix this EVERY-TIME I PAUSE printer, then start printer again. It immediately starts working, consistently until I sleep, log out, or don't print for a while.
This seems to be some timeout issue or such. I tried IP printing, but no difference.
Resetting the print system also did not help.
It's not catastrophic but sooo annoying. Any input appreciated!
Thx,
Dan

Hello SunnygirlQ. Welcome to the Apple Discussions!
Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link.
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help:
o Printer troubleshooting for AirPort Extreme and AirPort Express
I assume that this printer works just fine when it is connected directly to your Mac ... correct? If so, has it worked when connected to the AX in the past ... or has it always had this problem? If it did work correctly before, did you do any updates, especially to the AX, recently?

Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)

Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano Villanueva

Hi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva

Spartan 3E with Labview 2012 (32 bit) on WIndows 7 64-bit - Error Code: -310602 NI-COBS: Unable to communicate with device over communication cable.

Thanks for the info, Kyle. I will probably try to find an older 32-bit XP machine. VM is just not an option for me right now.

Hello everybody,
I am trying to use the DIgilent Spartan 3E board with Labvew 2012 SP1 32 bit. I am able to compile the example code for LED shift. I am however unable to transfer code to the FPGA. I get the following error message:
Error Code: -310602
NI-COBS: Unable to communicate with device over communication cable.
Please verify that the cable is connected to a supported device and that the appropriate drivers are installed.
My system configuration is as follows:
Windows 7 (64 bit) on Dell XPS laptop.
Labview 2012 SP1 (32 bit)
Labview FPGA 2012 SP1
Labview 2012 FPGA support for Spartan3E
Xilinx 13.4 tools
DEFB LV FPGA 2012sp1 support installer
Xilinx USB cable driver v1.3 installed.
I took all the precautions mentioned by others on this forum and others, mainly that the cable must be disconnected before installing the Xilinx cable driver. All software and drivers were installed correctly. I even uninstalled and reinstalled the entire Labview software set I had. I still get the same error.
A few other questions:
1. Is the Xilinx cable different from a regular USB cable of the same configuration ?
2. When I program the FPGA I only have the USB cable connected between my computer and the Spartan 3e board. Should any other cable be connected ?
3. What should be the correct jumper settings for J1 - JP30 (especially J30, J11, JP9, JP6, JP7, etc) ?
I have been at this or over 3 days trying to figure it out. Any help will be greatly appreciated.

I have a HP Laserjet 4345MFP with Device Errors in the log

I have an HP LaserJet 4345 MFP with Device Errors in my log, How do I resolve this issues. It is obvoisly not a Windows 7 issue, or a connectivitiy Issue, it is a machine issue, if you would like me to continue using HP products for my company I think you would be wise and fix your website so it will let me ask the questions I have about it so I can get a decent answer to help me resolve my issues. HP has the worst forums I've ever seen..
50 Jan-17-2012 01:37 PM 136100 49 0665 09.170.8 5E90 2356 Device Error
49 Jan-17-2012 01:42 PM 136103 49 0665 09.170.8 5E90 2356 Device Error
48 Jan-09-2012 04:23 PM 134393 49 0665 09.170.8 5E90 2356 Device Error
47 Dec-29-2011 01:36 PM 132772 41.03.00 09.170.8 GENERAL MISPRINT ERROR
46 Dec-29-2011 11:31 AM 132748 30.01.03 09.170.8 ADF PICK ERROR
45 Nov-04-2011 11:47 AM 125334 41.03.00 09.170.8 GENERAL MISPRINT ERROR
44 Nov-04-2011 11:47 AM 125334 13.06.00 09.170.8 FUSER OUTPUT, PAPER STOPPED JAM
43 Nov-04-2011 11:46 AM 125333 41.03.00 09.170.8 GENERAL MISPRINT ERROR
42 Nov-04-2011 11:43 AM 125332 13.02.00 09.170.8 PAPER FEED 1, PAPER STOPPED JAM
41 Oct-26-2011 05:21 PM 122984 30.01.02 09.170.8 ADF PAPER JAM

Hi wonka001,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HT4236 I get an error message with I try to plug into itunes; This iPhone cannot be used because the Apple Mobile Device service is not started.

I get an error message with I try to plug into itunes;
This iPhone cannot be used because the Apple Mobile Device service is not started.

http://support.apple.com/kb/TS1567

Error with device performance report

Hi all
I had propblem with Device performance report of LMS 4.0. You could see picture below about the problem. How do resolve it ?
Thanks

Hi all
Here is error about Device performance report. Please help me fix it. Thanks
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet execution threw an exception
    org.ajaxanywhere.AAFilter.doFilter(AAFilter.java:46)
    com.cisco.nm.cmf.util.AjaxAccessFilter.doFilter(AjaxAccessFilter.java:189)
    com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)
root cause
java.lang.OutOfMemoryError: unable to create new native thread
    java.lang.Thread.start0(Native Method)
    java.lang.Thread.start(Thread.java:640)
    com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:923)
    com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
    com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1165)
    com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1149)
    sun.net.www.protocol.https.HttpsClient.afterConnect(HttpsClient.java:434)
    sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(AbstractDelegateHttpsURLConnection.java:166)
    sun.net.www.protocol.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:1019)
    com.sun.net.ssl.internal.www.protocol.https.HttpsURLConnectionOldImpl.getOutputStream(HttpsURLConnectionOldImpl.java:200)
    com.cisco.nm.xms.ctm.client.DefaultHTTPClientImpl.getOutputStream(DefaultHTTPClientImpl.java:83)
    com.cisco.nm.xms.ctm.client.CTMCall.performBinaryRPC(CTMCall.java:782)
    com.cisco.nm.xms.ctm.client.CTMCall.performRPC(CTMCall.java:694)
    com.cisco.nm.xms.ctm.client.CTMCall.invoke(CTMCall.java:409)
    com.cisco.nm.xms.ctm.client.CTMCall.setMethodAndInvoke(CTMCall.java:449)
    com.cisco.nm.xms.ctm.client.CTMClientProxy.invoke(CTMClientProxy.java:70)
    $Proxy544.evaluateGroup(Unknown Source)
    com.cisco.nm.xms.ogs.client.OGSServerProxy.evaluateGroup(OGSServerProxy.java:900)
    com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.evaluateGroup(DeviceSelectorTreeGenerator.java:2621)
    com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.getFirstLevelGroups(DeviceSelectorTreeGenerator.java:453)
    com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.getGroupsAndObjects(DeviceSelectorTreeGenerator.java:399)
    com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.getTreeEntries(DeviceSelectorTreeGenerator.java:192)
    com.cisco.nm.uii.hos.HOSRequestHelper.generateParameterEntries(HOSRequestHelper.java:5560)
    com.cisco.nm.uii.hos.HOSRequestHelper.constructHOSTree(HOSRequestHelper.java:1010)
    com.cisco.nm.upm.reports.devicedashboard.DeviceDashBoardAction.perform(DeviceDashBoardAction.java:65)
    org.apache.struts.action.ActionServlet.processActionPerform(ActionServlet.java:1786)
    org.apache.struts.action.ActionServlet.process(ActionServlet.java:1585)
    org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:491)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:627)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
    org.ajaxanywhere.AAFilter.doFilter(AAFilter.java:46)
    com.cisco.nm.cmf.util.AjaxAccessFilter.doFilter(AjaxAccessFilter.java:189)
    com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.29 logs.
Apache Tomcat/5.5.29

Digital Fax to Folder Setup gives error message unable to establish 2-way communication with device

Digital Fax to Folder Setup gives error message unable to establish 2-way communication with device. I can s end a Fax and I can print documents. I can also, now, scan to computer. I have changed the phone line twice, restarted the router, restarted the computer, and made sure the front panel was lit when setting up the Digital Fax folder. I am on a Homegroup network, with both wireles and ethernet computers. When I view the network, it sees both computers (wireless laptop and enthernet desktop), the printer, scanner, and router (VerizonDrive). I recently had to reinstall Windows 7, where Digital Fax to Folder Setup previously worked, and now it doesn't. The network shows up as Network 3. When I try to view the network map, I get the error message that Windows cannot create the network map. Responses from other devices on the network are delayed or there is an incompatible router on the network. What am I doing wrong?

Hello @JiffyFingers and Good Afternoon
From what you have described, and from the work you did on another thread, I believe you'd get better assistance talking to either Microsoft or your router manufacturer. With not being able to create the network map, that's something a bit more intricate than digital fax setup
You can have a look at this Windows cannot create the network map. Responses from other devices on the network are delayed or th... Microsoft thread as well, and you may be able to figure it out from there.
Hope that helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Error "Overlapping selection criteria with DTP" when transporting DTP

When transporting a DTP from Dev to QA I get the following error in the trasnport log:
Overlapping selection criteria with DTP DTP_4APJZSGKYQLUQYBCDBWK707JO
Message no. RSBK019
Diagnosis
The selection criteria for the DTP to be activated overlap with the selection criteria of DTP DTP_4APJZSGKYQLUQYBCDBWK707JO in field , for example, with regard to value . Delta transfer from a source object to a target object is only allowed to transfer each record oncce. However, this cannot be guaranteed if two DTPs have overlapping selection criteria with the 'Delta' extraction mode.
System Response
You cannot activate the DTP with the current selection criteria.
Procedure
Restrict the selection criteria so that they do not overlap with the selection criteria for DTP DTP_4APJZSGKYQLUQYBCDBWK707JO.
The DTP is a delta process which loads data from one infocube into an DSO. I understand that the error is that it is transporting the Delta parameters (something similar to a Delta initialization of infopackages I suppose) but I don´t how to access the information of the delta (selection criteria) of a DTP.
Any suggestions? or similar experiences?
Thanks in advance
nicolá

Hello,
You can modify a parameter to create and modify dtp in Production. Like normally is done with Infopackages. There is no reason to make the changes in Dev in the Infopackages and DTP, and transport to Production. This transports normally cause that kind of errors because the id's are different in Dev, QA and Prod, and it is difficult to change dtp in that way.
To change the parameter do like this:
Execute Trx. RSA1 -> Transport Connection -> Tab Object Changeability -> Change DTPA to Everything Changeable.
Do this in Dev, QA and Prod.
Regards,
Jorge Diogo

Error: Element entry overlaps with another entry of the same type

Dear,
while entering salary this error comes (Error: Element entry overlaps with another entry of the same type). what should i do for solving this issue? your feed back will be highly appreciated.
REGARDS SAJJAD HASSAN KHAN

Hi,
I have faced the similar issue. And got it resolved after deleting the Element entries made for the employee.
After deleting the similar element I was able to create Salary proposal for the employee.
Please Verify whether any future dated salary proposal are existing for this employee.
Also check if it has similar entries made for the ELEMENT.
Thanks,
Prem

Error FZ-358 - Overlap with payment run

Hello.
We have a client SAP 40B that experienced an issue while running a new payment run throught T-code F110.
The payment was:
Run Date: 12.30.2008
Identification: F0719
The user got the following message:
"FZ 358 - Overlap with payment run 02.03.2008 / Identification F0719"
"Payment run canceled"
Anybody have an idea why this happened as the payments ran in different dates?
Thank you!

Hello MSJ.
This issue happens probably because there was another payment ID with the same name that ran incompletely in the past. Somehow the system identifies this payment ID and then try to use the same one when you run another payment with the same ID so this message comes up. The solution is really delete the old uncompleted payment run and then run the payment again.
Regards,
Volnei Luiz

HT201263 i do all this process but it keep saying thats there is an error (9) with the device

i do all this process but it keep saying thats there is an error (9) with the device

See this support document for help with restore errors. http://support.apple.com/kb/TS3694

JDev 1013 Error: Internal compilation error, terminated with a fatal except

I've a class I compiled used in JDev 10.1.2.1.
Now I try to compile it with JDev 10.1.3 but I get an error :
Error: Internal compilation error, terminated with a fatal exception
What does it means ?
How can I solve it ?
I tried to use both 5.0 and 1.4.2 compilers but the result is the same.
Tks
Tullio
Here the class
/* The following code was generated by JFlex 1.2.2 on 05/10/04 17.46 */
* Copyright (C) 1998,99 Gerwin Klein <[email protected]>. *
* All rights reserved. *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License. See the file *
* COPYRIGHT for more information. *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* You should have received a copy of the GNU General Public License along *
* with this program; if not, write to the Free Software Foundation, Inc., *
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA *
package axioma.a4j.parser;
import java_cup.runtime.*;
* This class is a scanner generated by
* JFlex 1.2.2
* on 05/10/04 17.46 from the specification file
* <tt>file:/C:/A4j/A4j/Common/Parser/grammatiche/Scanner.flex</tt>
public class AxScanner implements java_cup.runtime.Scanner {
/** this character denotes the end of file */
final public static int YYEOF = -1;
/** lexical states */
final public static int STRING = 1;
final public static int YYINITIAL = 0;
final public static int CHARLITERAL = 2;
* Translates characters to character classes
final private static String yycmap_packed =
"\11\10\1\3\1\2\1\0\1\3\1\1\16\10\4\0\1\3\1\50"+
"\1\16\1\0\1\7\1\0\1\44\1\15\1\31\1\32\1\5\1\41"+
"\1\40\1\42\1\14\1\4\1\12\11\13\1\0\1\37\1\47\1\46"+
"\1\45\2\0\32\11\1\35\1\17\1\36\1\0\1\11\1\0\1\25"+
"\1\51\2\11\1\23\1\24\5\11\1\26\1\6\1\30\3\11\1\21"+
"\1\27\1\20\1\22\5\11\1\33\1\43\1\34\1\0\41\10\2\0"+
"\4\11\4\0\1\11\12\0\1\11\4\0\1\11\5\0\27\11\1\0"+
"\37\11\1\0\u0128\11\2\0\22\11\34\0\136\11\2\0\11\11\2\0"+
"\7\11\16\0\2\11\16\0\5\11\11\0\1\11\21\0\117\10\21\0"+
"\3\10\27\0\1\11\13\0\1\11\1\0\3\11\1\0\1\11\1\0"+
"\24\11\1\0\54\11\1\0\10\11\2\0\32\11\14\0\202\11\1\0"+
"\4\10\5\0\71\11\2\0\2\11\2\0\2\11\3\0\46\11\2\0"+
"\2\11\67\0\46\11\2\0\1\11\7\0\47\11\11\0\21\10\1\0"+
"\27\10\1\0\3\10\1\0\1\10\1\0\2\10\1\0\1\10\13\0"+
"\33\11\5\0\3\11\56\0\32\11\5\0\13\11\13\10\12\0\12\10"+
"\6\0\1\10\143\11\1\0\1\11\7\10\2\0\6\10\2\11\2\10"+
"\1\0\4\10\2\0\12\10\3\11\22\0\1\10\1\11\1\10\33\11"+
"\3\0\33\10\65\0\46\11\13\10\u0150\0\3\10\1\0\65\11\2\0"+
"\1\10\1\11\20\10\2\0\1\11\4\10\3\0\12\11\2\10\2\0"+
"\12\10\21\0\3\10\1\0\10\11\2\0\2\11\2\0\26\11\1\0"+
"\7\11\1\0\1\11\3\0\4\11\2\0\1\10\1\0\7\10\2\0"+
"\2\10\2\0\3\10\11\0\1\10\4\0\2\11\1\0\3\11\2\10"+
"\2\0\12\10\4\11\16\0\1\10\2\0\6\11\4\0\2\11\2\0"+
"\26\11\1\0\7\11\1\0\2\11\1\0\2\11\1\0\2\11\2\0"+
"\1\10\1\0\5\10\4\0\2\10\2\0\3\10\13\0\4\11\1\0"+
"\1\11\7\0\14\10\3\11\14\0\3\10\1\0\7\11\1\0\1\11"+
"\1\0\3\11\1\0\26\11\1\0\7\11\1\0\2\11\1\0\5\11"+
"\2\0\1\10\1\11\10\10\1\0\3\10\1\0\3\10\2\0\1\11"+
"\17\0\1\11\5\0\12\10\21\0\3\10\1\0\10\11\2\0\2\11"+
"\2\0\26\11\1\0\7\11\1\0\2\11\2\0\4\11\2\0\1\10"+
"\1\11\6\10\3\0\2\10\2\0\3\10\10\0\2\10\4\0\2\11"+
"\1\0\3\11\4\0\12\10\22\0\2\10\1\0\6\11\3\0\3\11"+
"\1\0\4\11\3\0\2\11\1\0\1\11\1\0\2\11\3\0\2\11"+
"\3\0\3\11\3\0\10\11\1\0\3\11\4\0\5\10\3\0\3\10"+
"\1\0\4\10\11\0\1\10\17\0\11\10\21\0\3\10\1\0\10\11"+
"\1\0\3\11\1\0\27\11\1\0\12\11\1\0\5\11\4\0\7\10"+
"\1\0\3\10\1\0\4\10\7\0\2\10\11\0\2\11\4\0\12\10"+
"\22\0\2\10\1\0\10\11\1\0\3\11\1\0\27\11\1\0\12\11"+
"\1\0\5\11\4\0\7\10\1\0\3\10\1\0\4\10\7\0\2\10"+
"\7\0\1\11\1\0\2\11\4\0\12\10\22\0\2\10\1\0\10\11"+
"\1\0\3\11\1\0\27\11\1\0\20\11\4\0\6\10\2\0\3\10"+
"\1\0\4\10\11\0\1\10\10\0\2\11\4\0\12\10\22\0\2\10"+
"\1\0\22\11\3\0\30\11\1\0\11\11\1\0\1\11\2\0\7\11"+
"\3\0\1\10\4\0\6\10\1\0\1\10\1\0\10\10\22\0\2\10"+
"\15\0\60\11\1\10\2\11\7\10\4\0\10\11\10\10\1\0\12\10"+
"\47\0\2\11\1\0\1\11\2\0\2\11\1\0\1\11\2\0\1\11"+
"\6\0\4\11\1\0\7\11\1\0\3\11\1\0\1\11\1\0\1\11"+
"\2\0\2\11\1\0\4\11\1\10\2\11\6\10\1\0\2\10\1\11"+
"\2\0\5\11\1\0\1\11\1\0\6\10\2\0\12\10\2\0\2\11"+
"\42\0\1\11\27\0\2\10\6\0\12\10\13\0\1\10\1\0\1\10"+
"\1\0\1\10\4\0\2\10\10\11\1\0\42\11\6\0\24\10\1\0"+
"\2\10\4\11\4\0\10\10\1\0\44\10\11\0\1\10\71\0\42\11"+
"\1\0\5\11\1\0\2\11\1\0\7\10\3\0\4\10\6\0\12\10"+
"\6\0\6\11\4\10\106\0\46\11\12\0\47\11\11\0\132\11\5\0"+
"\104\11\5\0\122\11\6\0\7\11\1\0\77\11\1\0\1\11\1\0"+
"\4\11\2\0\7\11\1\0\1\11\1\0\4\11\2\0\47\11\1\0"+
"\1\11\1\0\4\11\2\0\37\11\1\0\1\11\1\0\4\11\2\0"+
"\7\11\1\0\1\11\1\0\4\11\2\0\7\11\1\0\7\11\1\0"+
"\27\11\1\0\37\11\1\0\1\11\1\0\4\11\2\0\7\11\1\0"+
"\47\11\1\0\23\11\16\0\11\10\56\0\125\11\14\0\u026c\11\2\0"+
"\10\11\12\0\32\11\5\0\113\11\225\0\64\11\40\10\7\0\1\11"+
"\4\0\12\10\41\0\4\10\1\0\12\10\6\0\130\11\10\0\51\11"+
"\1\10\u0556\0\234\11\4\0\132\11\6\0\26\11\2\0\6\11\2\0"+
"\46\11\2\0\6\11\2\0\10\11\1\0\1\11\1\0\1\11\1\0"+
"\1\11\1\0\37\11\2\0\65\11\1\0\7\11\1\0\1\11\3\0"+
"\3\11\1\0\7\11\3\0\4\11\2\0\6\11\4\0\15\11\5\0"+
"\3\11\1\0\7\11\17\0\4\10\32\0\5\10\20\0\2\11\51\0"+
"\6\10\17\0\1\11\40\0\20\11\40\0\15\10\4\0\1\10\40\0"+
"\1\11\4\0\1\11\2\0\12\11\1\0\1\11\3\0\5\11\6\0"+
"\1\11\1\0\1\11\1\0\1\11\1\0\4\11\1\0\3\11\1\0"+
"\7\11\46\0\44\11\u0e81\0\3\11\31\0\11\11\6\10\1\0\5\11"+
"\2\0\3\11\6\0\124\11\4\0\2\10\2\0\2\11\2\0\136\11"+
"\6\0\50\11\4\0\136\11\21\0\30\11\u0248\0\u19b6\11\112\0\u51a6\11"+
"\132\0\u048d\11\u0773\0\u2ba4\11\u215c\0\u012e\11\322\0\7\11\14\0\5\11"+
"\5\0\1\11\1\10\12\11\1\0\15\11\1\0\5\11\1\0\1\11"+
"\1\0\2\11\1\0\2\11\1\0\154\11\41\0\u016b\11\22\0\100\11"+
"\2\0\66\11\50\0\14\11\44\0\4\10\17\0\2\11\30\0\3\11"+
"\31\0\1\11\6\0\3\11\1\0\1\11\1\0\207\11\2\0\1\10"+
"\4\0\1\11\13\0\12\10\7\0\32\11\4\0\1\11\1\0\32\11"+
"\12\0\132\11\3\0\6\11\2\0\6\11\2\0\6\11\2\0\3\11"+
"\3\0\2\11\3\0\2\11\22\0\3\10\4\0";
* Translates characters to character classes
final private static char [] yycmap = yy_unpack_cmap(yycmap_packed);
* Translates a state to a row index in the transition table
final private static int yy_rowMap [] = {
0, 42, 84, 126, 168, 126, 210, 126, 252, 294,
336, 378, 126, 126, 420, 462, 504, 126, 126, 126,
126, 126, 126, 126, 126, 126, 126, 546, 126, 588,
126, 630, 672, 714, 756, 126, 126, 798, 840, 882,
126, 924, 966, 1008, 1050, 336, 1092, 1134, 1176, 1218,
126, 126, 126, 126, 126, 126, 126, 126, 126, 126,
126, 126, 126, 126, 1260, 1302, 1344, 1386, 1428, 1470,
1512, 1554, 126, 1596, 1638, 1680, 1722, 126, 126, 126,
126, 126, 126, 126, 1764, 294, 1806, 294, 294
* The packed transition table of the DFA
final private static String yy_packed =
"\1\4\1\5\2\6\1\7\1\10\1\11\1\12\1\4"+
"\1\12\1\13\1\14\1\4\1\15\1\16\1\4\1\17"+
"\3\12\1\20\3\12\1\21\1\22\1\23\1\24\1\25"+
"\1\26\1\27\1\30\1\31\1\32\1\33\1\34\1\35"+
"\1\36\1\37\1\40\1\41\1\12\1\42\1\43\1\44"+
"\12\42\1\45\1\42\1\46\32\42\1\47\1\50\1\51"+
"\13\47\1\4\1\52\32\47\54\0\1\6\53\0\1\53"+
"\1\54\52\0\1\12\1\55\4\12\4\0\11\12\20\0"+
"\1\12\6\0\6\12\4\0\11\12\20\0\1\12\12\0"+
"\2\56\1\57\47\0\2\14\1\57\43\0\6\12\4\0"+
"\1\12\1\60\7\12\20\0\1\12\6\0\6\12\4\0"+
"\5\12\1\61\3\12\20\0\1\12\6\0\6\12\4\0"+
"\2\12\1\62\6\12\20\0\1\12\43\0\1\63\54\0"+
"\1\64\51\0\1\65\51\0\1\66\3\0\1\42\2\0"+
"\12\42\1\0\1\42\1\0\32\42\2\0\1\44\47\0"+
"\2\67\1\0\12\67\1\70\1\71\1\72\1\73\1\74"+
"\2\67\1\75\3\67\1\76\20\67\1\77\15\0\1\100"+
"\36\0\1\51\47\0\2\67\1\0\12\67\1\101\1\102"+
"\1\103\1\104\1\105\2\67\1\106\3\67\1\104\20\67"+
"\1\107\1\53\1\110\1\111\47\53\52\112\6\0\6\55"+
"\4\0\11\55\20\0\1\55\12\0\2\57\44\0\6\12"+
"\4\0\2\12\1\113\6\12\20\0\1\12\6\0\6\12"+
"\4\0\6\12\1\114\2\12\20\0\1\12\6\0\6\12"+
"\4\0\6\12\1\115\2\12\20\0\1\12\15\0\1\116"+
"\51\0\1\117\51\0\1\120\51\0\1\121\51\0\1\122"+
"\51\0\1\123\51\0\1\124\36\0\1\111\47\0\5\112"+
"\1\125\44\112\6\0\6\12\4\0\3\12\1\126\5\12"+
"\20\0\1\12\6\0\6\12\4\0\7\12\1\127\1\12"+
"\20\0\1\12\6\0\6\12\4\0\6\12\1\130\2\12"+
"\20\0\1\12\4\112\1\111\1\125\44\112\6\0\6\12"+
"\4\0\3\12\1\131\5\12\20\0\1\12";
* The transition table of the DFA
final private static int yytrans [] = yy_unpack(yy_packed);
/* error codes */
final private static int YY_UNKNOWN_ERROR = 0;
final private static int YY_ILLEGAL_STATE = 1;
final private static int YY_NO_MATCH = 2;
final private static int YY_PUSHBACK_2BIG = 3;
/* error messages for the codes above */
final private static String YY_ERROR_MSG[] = {
"Unkown internal scanner error",
"Internal error: unknown state",
"Error: could not match input",
"Error: pushback value was too large"
* YY_ATTRIBUTE[aState] contains the attributes of state <code>aState</code>
private final static byte YY_ATTRIBUTE[] = {
0, 0, 0, 9, 1, 9, 1, 9, 1, 1, 1, 1, 9, 9, 1, 1,
1, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 1, 9, 1, 9, 1,
1, 1, 1, 9, 9, 1, 1, 1, 9, 1, 0, 0, 1, 0, 1, 1,
1, 1, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9, 9,
1, 1, 1, 1, 1, 1, 1, 1, 9, 0, 1, 1, 1, 9, 9, 9,
9, 9, 9, 9, 0, 1, 1, 1, 1
/** the input device */
private java.io.Reader yy_reader;
/** the current state of the DFA */
private int yy_state;
/** the current lexical state */
private int yy_lexical_state = YYINITIAL;
/** this buffer contains the current text to be matched and is
the source of the yytext() string */
private char yy_buffer[] = new char[16384];
/** the textposition at the last accepting state */
private int yy_markedPos;
/** the textposition at the last state to be included in yytext */
private int yy_pushbackPos;
/** the current text position in the buffer */
private int yy_currentPos;
/** startRead marks the beginning of the yytext() string in the buffer */
private int yy_startRead;
/** endRead marks the last character in the buffer, that has been read
from input */
private int yy_endRead;
/** number of newlines encountered up to the start of the matched text */
private int yyline;
/** the number of characters up to the start of the matched text */
private int yychar;
* the number of characters from the last newline up to the start of the
* matched text
private int yycolumn;
* yy_atBOL == true <=> the scanner is currently at the beginning of a line
private boolean yy_atBOL;
/** yy_atEOF == true <=> the scanner has returned a value for EOF */
private boolean yy_atEOF;
/** denotes if the user-EOF-code has already been executed */
private boolean yy_eof_done;
/* user code: */
StringBuffer string = new StringBuffer();
private InContestoParser mContesto = null;
private Symbol symbol(int type) {
return new JavaSymbol(type, yyline+1, yycolumn+1);
private Symbol symbol(int type, Object value) {
return new JavaSymbol(type, yyline+1, yycolumn+1, value);
private Symbol axSymbol(Object value) {
int tipo = 0;
CercaValore cercaVal = new CercaValoreComm(value.toString(),mContesto);
Ritorno rito = cercaVal.cercaValore();
int tipoSym = rito.getTipo();
if (tipoSym == Domini.tipoDatoNumerico) {
     tipo = AxSym.VAR_N;
else if (tipoSym == Domini.tipoDatoAlfanumerico) {
tipo = AxSym.VAR_A;
else if (tipoSym == Domini.tipoDatoBooleano) {
     tipo = AxSym.VAR_B;
JavaSymbol myJ = new JavaSymbol(tipo, yyline+1, yycolumn+1, value);
return myJ;
private Symbol axMetodo(Object value) {
int tipo = 0;
CercaValore cercaVal = new CercaValoreComm(value.toString(),mContesto);
Ritorno rito = cercaVal.cercaValore();
int tipoSym = rito.getTipo();
if (tipoSym == Domini.tipoDatoNumerico) {
     tipo = AxSym.MET_N;
else if (tipoSym == Domini.tipoDatoAlfanumerico) {
tipo = AxSym.MET_A;
else if (tipoSym == Domini.tipoDatoBooleano) {
     tipo = AxSym.MET_B;
JavaSymbol myJ = new JavaSymbol(tipo, yyline+1, yycolumn+1, value);
return myJ;
* Set the reader and reset variables
public void setReader(java.io.Reader in) {
this.yy_lexical_state = YYINITIAL;
this.yy_atEOF = false;
this.yy_atBOL = false;
this.yy_eof_done = false;
this.yy_state = 0;
this.yy_pushbackPos = 0;
this.yy_markedPos = 0;
this.yy_currentPos = 0;
this.yy_startRead = 0;
this.yy_endRead = 0;
this.yyline = 0;
this.yychar = 0;
this.yycolumn = 0;
this.yy_reader = in;
public void setContesto(InContestoParser xpContesto) {
mContesto = xpContesto;
public InContestoParser getContesto() {
return mContesto;
* Creates a new scanner.
* There is also java.io.Reader version of this constructor.
* @param in the java.io.Inputstream to read input from.
public AxScanner() throws java.io.IOException { this(System.in); }
* Creates a new scanner
* There is also a java.io.InputStream version of this constructor.
* @param in the java.io.Reader to read input from.
AxScanner(java.io.Reader in) {
this.yy_reader = in;
* Creates a new scanner.
* There is also java.io.Reader version of this constructor.
* @param in the java.io.Inputstream to read input from.
AxScanner(java.io.InputStream in) {
this(new java.io.InputStreamReader(in));
* Unpacks the compressed DFA transition table.
* @param packed the packed transition table
* @return the unpacked transition table
private static int [] yy_unpack(String packed) {
int [] trans = new int[1848];
int i = 0; /* index in packed string */
int j = 0; /* index in unpacked array */
while (i < 492) {
int count = packed.charAt(i++);
int value = packed.charAt(i++);
value--;
do trans[j++] = value; while (--count > 0);
return trans;
* Unpacks the compressed character translation table.
* @param packed the packed character translation table
* @return the unpacked character translation table
private static char [] yy_unpack_cmap(String packed) {
char [] map = new char[0x10000];
int i = 0; /* index in packed string */
int j = 0; /* index in unpacked array */
while (i < 1614) {
int count = packed.charAt(i++);
char value = packed.charAt(i++);
do map[j++] = value; while (--count > 0);
return map;
* Gets the next input character.
* @return the next character of the input stream, EOF if the
* end of the stream is reached.
* @exception IOException if any I/O-Error occurs
private int yy_advance() throws java.io.IOException {
/* standard case */
if (yy_currentPos < yy_endRead) return yy_buffer[yy_currentPos++];
/* if the eof is reached, we don't need to work hard */
if (yy_atEOF) return YYEOF;
/* otherwise: need to refill the buffer */
/* first: make room (if you can) */
if (yy_startRead > 0) {
System.arraycopy(yy_buffer, yy_startRead,
yy_buffer, 0,
yy_endRead-yy_startRead);
/* translate stored positions */
yy_endRead-= yy_startRead;
yy_currentPos-= yy_startRead;
yy_markedPos-= yy_startRead;
yy_pushbackPos-= yy_startRead;
yy_startRead = 0;
/* is the buffer big enough? */
if (yy_currentPos >= yy_buffer.length) {
/* if not: blow it up */
char newBuffer[] = new char[yy_currentPos*2];
System.arraycopy(yy_buffer, 0, newBuffer, 0, yy_buffer.length);
yy_buffer = newBuffer;
/* finally: fill the buffer with new input */
int numRead = yy_reader.read(yy_buffer, yy_endRead,
yy_buffer.length-yy_endRead);
if ( numRead == -1 ) return YYEOF;
yy_endRead+= numRead;
return yy_buffer[yy_currentPos++];
* Closes the input stream.
final public void yyclose() throws java.io.IOException {
yy_atEOF = true; /* indicate end of file */
yy_endRead = yy_startRead; /* invalidate buffer */
yy_reader.close();
* Returns the current lexical state.
final public int yystate() {
return yy_lexical_state;
* Enters a new lexical state
* @param newState the new lexical state
final public void yybegin(int newState) {
yy_lexical_state = newState;
* Returns the text matched by the current regular expression.
final public String yytext() {
return new String( yy_buffer, yy_startRead, yy_markedPos-yy_startRead );
* Returns the length of the matched text region.
final public int yylength() {
return yy_markedPos-yy_startRead;
* Reports an error that occured while scanning.
* @param errorCode the code of the errormessage to display
private void yy_ScanError(int errorCode) {
try {
System.out.println(YY_ERROR_MSG[errorCode]);
catch (ArrayIndexOutOfBoundsException e) {
System.out.println(YY_ERROR_MSG[YY_UNKNOWN_ERROR]);
System.exit(1);
* Pushes the specified amount of characters back into the input stream.
* They will be read again by then next call of the scanning method
* @param number the number of characters to be read again.
* This number must not be greater than yylength()!
private void yypushback(int number) {
if ( number > yylength() )
yy_ScanError(YY_PUSHBACK_2BIG);
yy_markedPos -= number;
* Contains user EOF-code, which will be executed exactly once,
* when the end of file is reached
private void yy_do_eof() throws java.io.IOException {
if (!yy_eof_done) {
yy_eof_done = true;
yyclose();
* Resumes scanning until the next regular expression is matched,
* the end of input is encountered or an I/O-Error occurs.
* @return the next token
* @exception IOException if any I/O-Error occurs
public java_cup.runtime.Symbol next_token() throws java.io.IOException {
int yy_input;
int yy_action;
while (true) {
boolean yy_counted = false;
for (yy_currentPos = yy_startRead; yy_currentPos < yy_markedPos;
yy_currentPos++) {
switch (yy_buffer[yy_currentPos]) {
case '\r':
yyline++;
yycolumn = 0;
yy_counted = true;
break;
case '\n':
if (yy_counted)
yy_counted = false;
else {
yyline++;
yycolumn = 0;
break;
default:
yy_counted = false;
yycolumn++;
if (yy_counted) {
if ( yy_advance() == '\n' ) yyline--;
if ( !yy_atEOF ) yy_currentPos--;
yy_action = -1;
yy_currentPos = yy_startRead = yy_markedPos;
yy_state = yy_lexical_state;
yy_forAction: {
while (true) {
yy_input = yy_advance();
if ( yy_input == YYEOF ) break yy_forAction;
int yy_next = yytrans[ yy_rowMap[yy_state] + yycmap[yy_input] ];
if (yy_next == -1) break yy_forAction;
yy_state = yy_next;
int yy_attributes = YY_ATTRIBUTE[yy_state];
if ( (yy_attributes & 1) > 0 ) {
yy_action = yy_state;
yy_markedPos = yy_currentPos;
if ( (yy_attributes & 8) > 0 ) break yy_forAction;
switch (yy_action) {
case 83:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\b')); }
case 90: break;
case 82:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\f')); }
case 91: break;
case 81:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\r')); }
case 92: break;
case 80:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\t')); }
case 93: break;
case 78:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\"')); }
case 94: break;
case 77:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\'')); }
case 95: break;
case 88:
{ return symbol(AxSym.BOOLEAN_LITERAL, new Boolean(false)); }
case 96: break;
case 87:
{ return symbol(AxSym.NULL_LITERAL); }
case 97: break;
case 85:
{ return symbol(AxSym.BOOLEAN_LITERAL, new Boolean(true)); }
case 98: break;
case 79:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character('\\')); }
case 99: break;
case 71:
case 72:
{ /* ignore */ }
case 100: break;
case 63:
{ yybegin(YYINITIAL); return symbol(AxSym.CHARACTER_LITERAL, new Character(yytext().charAt(0))); }
case 101: break;
case 62:
{ string.append( '\b' ); }
case 102: break;
case 61:
{ string.append( '\n' ); }
case 103: break;
case 60:
{ string.append( '\f' ); }
case 104: break;
case 59:
{ string.append( '\r' ); }
case 105: break;
case 58:
{ string.append( '\t' ); }
case 106: break;
case 57:
{ string.append( '\\' ); }
case 107: break;
case 56:
{ string.append( '\"' ); }
case 108: break;
case 55:
{ string.append( '\'' ); }
case 109: break;
case 25:
{ return symbol(AxSym.PLUS); }
case 110: break;
case 24:
{ return symbol(AxSym.COMMA); }
case 111: break;
case 23:
{ return symbol(AxSym.SEMI); }
case 112: break;
case 22:
{ return symbol(AxSym.RQUADRA); }
case 113: break;
case 21:
{ return symbol(AxSym.LQUADRA); }
case 114: break;
case 20:
{ return symbol(AxSym.RGRAFFA); }
case 115: break;
case 19:
{ return symbol(AxSym.LGRAFFA); }
case 116: break;
case 18:
{ return symbol(AxSym.RPAREN); }
case 117: break;
case 17:
{ return symbol(AxSym.LPAREN); }
case 118: break;
case 3:
case 37:
case 38:
case 41:
{ throw new RuntimeException("Illegal character \""+yytext()+"\" at line "+yyline+", column "+yycolumn); }
case 119: break;
case 4:
case 5:
{ /*return symbol(AxSym.INVIO);*/ /* ignore */ }
case 120: break;
case 6:
{ return symbol(AxSym.DIVIDE); }
case 121: break;
case 7:
{ return symbol(AxSym.TIMES); }
case 122: break;
case 8:
case 9:
case 14:
case 15:
case 16:
case 47:
case 48:
case 49:
case 74:
case 75:
case 76:
case 86:
{ return axSymbol(yytext()); }
case 123: break;
case 10:
case 11:
{ return symbol(AxSym.INTEGER_LITERAL, new Integer(yytext())); }
case 124: break;
case 12:
{ yybegin(STRING); string.setLength(0); }
case 125: break;
case 13:
{ yybegin(CHARLITERAL); }
case 126: break;
case 26:
{ return symbol(AxSym.MINUS); }
case 127: break;
case 27:
{ return symbol(AxSym.ORB); }
case 128: break;
case 28:
{ return symbol(AxSym.ANDB); }
case 129: break;
case 29:
{ return symbol(AxSym.GT); }
case 130: break;
case 30:
{ return symbol(AxSym.EQ); }
case 131: break;
case 31:
{ return symbol(AxSym.LT); }
case 132: break;
case 32:
{ return symbol(AxSym.NEG); }
case 133: break;
case 33:
{ string.append( yytext() ); }
case 134: break;
case 34:
case 35:
{ throw new RuntimeException("Unterminated string at end of line"); }
case 135: break;
case 36:
{ yybegin(YYINITIAL); return symbol(AxSym.STRING_LITERAL, string.toString()); }
case 136: break;
case 39:
case 40:
{ throw new RuntimeException("Unterminated character literal at end of line"); }
case 137: break;
case 44:
{ return axMetodo(yytext()); }
case 138: break;
case 46:
{ return symbol(AxSym.FLOATING_POINT_LITERAL, new Float(yytext())); }
case 139: break;
case 50:
{ return symbol(AxSym.DUEP); }
case 140: break;
case 51:
{ return symbol(AxSym.GE); }
case 141: break;
case 52:
{ return symbol(AxSym.LE); }
case 142: break;
case 53:
{ return symbol(AxSym.NE); }
case 143: break;
case 54:
case 64:
case 65:
case 66:
case 67:
case 68:
case 69:
case 70:
{ throw new RuntimeException("Illegal escape sequence \""+yytext()+"\""); }
case 144: break;
default:
if (yy_input == YYEOF && yy_startRead == yy_currentPos) {
yy_atEOF = true;
yy_do_eof();
{     return new java_cup.runtime.Symbol(AxSym.EOF);
else {
yy_ScanError(YY_NO_MATCH);
}

I setted use Javac checkbox and it worked ???
Could someone explain me what happened ?
The problem seems to be in the very long privated final string I defined, making it shorther the problem is solved again .
Tks
Tullio

The port range is overlapped with rule X message - SRP521W

Hello,
I am having trouble adding a NAT port forwarding rule on my SRP521W. I get the error
The port range is overlapped with rule X, even though my port ranges are not overlapping.
I have this rule created (rule 2):
and am trying to create this rule:
I get this error
It seems to be related to the fact that both internal ports are 80, but this should not matter as the internal IP addresses are different. Can someone please explain how I should create rules to allow me to open ports to two different devices, with different IPs, using port 80?
Many thanks

Oh wow! That is an extremely old release.
I would certainly recommend upgrading straight away.
Latest release is 1.1.27 and is available via www.cisco.com/go/srp500 - follow the download software link on the right hand side.
When selecting code, follow the link for SRP520 Models (not SRP520-U)
You should find that the latest code fixes your issue (and provides more functionality).
Regards,
Andy

Metainit error - overlaps with device in metadevice state database

Similar Messages

Maybe you are looking for