Metallic Grinding Sound on Burned CD Playback

When I burn a playlist to a CD, and then playback the CD...some of the songs contain a short loud metallic grinding sound right in the middle of the song. Anyone know a reason why this might be happening?
Thanks

Many possible causes, but the first thing to try is go to Edit > Preferences > Advanced > Burning, and set the "Preferred Speed" to a much lower value, and then burn again.

Similar Messages

  • 27 Inch iMac 2.8GHz i5 (Mid-2010) Grinding Sound.

    Hi, I got my iMac as a replacement last year and it's just started making an intermittent grinding sound. It's never when doing anything specific. I tried to make it make the sound by rendering a video, doing a disk speedtest and nothing happened which has just confused me. I'm usually pretty good with computers, building PCs and repairing them but I have no idea what is going on with my iMac.
    Stupidly and because of money problems I couldn't get Applecare so it's 8 months out of warranty.
    Has anybody had any issues like this with their iMac, if so what was it that was wrong? I've not had the best of luck with Macs and it's getting annoying that they always break on me. Thanks in advanced!
    Benjamin

    Thanks, I have regular Time Machines backups so I'm not too concerned about that. It doesn't get louder under load and I've used SMCFanControl to put the 3 fans up 1 at a time and the noise didn't increase or start which leads me to believe it possibly is the Hard Drive. I can't get into AHT for some reason, It worked before updating to Mountain Lion and now I can't even get on to it using the Snow Leopard disk.
    I think I could try taking out the Hard Drive and run the drive in an enclosure just to see if the sound will start in one. If it does, I guess that's the easiest thing to replace and might be a good idea to go to an SSD at the same time.
    I'll try to explain the sound in more detail. At random times a noise would start and within 2 or 3 seconds it gets to about the volume of the fans at max, when at the peak volume the sound is like an angle grinder grinding metal then it just fades to nothing and the iMac sounds just like normal except for a slight whine from one of my fans that is inaudible unless I put my ear to the machine.
    I hope that was enough detail, it's somewhat hard to describe.
    Thanks again!

  • Nokia lumia 1520 loud speaker grinding sound and w...

    hi,
    my nokia lumia 1520 has been making sound grinding sounds which can only be heard if you put your ear close to the loud speaker. i emailed the company that i bought the phone from and this is what they said:
    "for this type of issue, you can do a Master Reset on your phone (please take note that by doing this all of your data will be erased). If the problem persists, kindly go to your nearest Nokia service center to have it checked. If it's still under warranty, any repairs will be free of charge. If it's NOT under warranty, please get the code from the service center and forward it to us through [email protected] so we can review the charges (subject for approval) and give you a refund for it."
    i did as they said but when i went to the nokia care centre, since i live in uk and the phone is from dubai they said that its out of warranty so i asked them for a code as the company said to me but nokia care team had no idea what i was talking about. i showed them the email and nothing
    so i was wondering if anyone can help me out
    id really appreciate it 
    thanks

    Hi thedeepsleeper,
    Welcome to the Nokia Support Discussions! 
    Are you still having an issue with your Lumia 1520? If yes, did something happen to your phone prior to the issue? What troubleshooting steps have you tried so far? Does it happen only when you put it on a loudspeaker? How about when connecting your earphone to your phone? 
    If you would like to send it for repair and since there's no international warranty, we suggest sending it to a Nokia Care Point in Dubai instead. To know more about the difference between the warranty in the UK and in Dubai, see these links: 
    http://www.nokia.com/gb-en/support/manufacturers-limited-warranty/
    http://www.nokia.com/ae-en/support/manufacturers-limited-warranty/

  • HT1338 HOW CAN I SPEED UP MY MAC IT HAS A GRINDING SOUND AND THE COLOUR WHEEL SPIN AND FREEZES

    MY IMAC HAS A GRINDING SOUND AND ITS SLOW, THE WHEEL START SPIINING AND IT FREEZES I HAVE TO TURN IT OFF AND ON AGAIN , WHAT IS THE PROBLEM AND HOW CAN I SPEED IT UP AND GET IT TO RUN FASTER?

    Does the sound appear to be from the hard drive, such as when you do any work (which means the hard drive is being written to)?
    Have you received an email from Apple about their Seagate hard drive recall (for certain iMac models)? Check to see if yours is affected here:
    http://www.apple.com/support/imac-harddrive/
    In any case, a grinding noise is what I had, followed by other very strange behavior and the diagnosis was hard drive failure. So, whether you are covered or not, I would strongly suggest that you backup all your data as quickly as you can and - if you're not covered by warranty or the recall - book an appointment at your nearest Genius Bar for a diagnosis.
    Also, please do not use all caps - difficult to read and it's considering shouting on the internet.

  • What is grinding sound on my iMAC

    I had my hard drive replaced and upgraded my desktop to snow leopard.  Since then the computer has a grinding sound coming from it.  The spinning ball of death appears frequently dispite taking actions to clear cache, etc.  Am I doomed to need to replace more of the 4 yr. old computer?

    Sounds like your new hard drive is dying. This does happen. Call the vendor from where you got it and ask for a replacement.
    Allan

  • Metallic scraping sound when booting Mac mini

    Hi,
    I just bought a Mac mini last week, and I've noticed that when I start it up, there's a sequence of two metallic scraping sounds coming out it when I start it up. I'm guessing that it's some part of the optical drive mechanism checking to see if a disc is inserted (there isn't a disc in the drive), but the noise is much louder than I've experienced when booting any other Mac or Windows machine that I've used. Is this normal, or is this something that needs investigation? If it matters, I have Boot Camp installed, so Snow Leopard is on one partition of the hard drive, and Windows Vista is on the other. The sound occurs regardless of which partition is set to be the boot partition.
    Thanks,
    Ken

    Hi,
    Thanks for the info. I confirmed at one of the Apple Stores near me that the sound is exactly as you described it. I agree with you, this is the noisiest optical drive that I've ever heard, significantly louder than the sound that an empty floppy drive makes when booting a Windows machine.
    Thanks again,
    Ken

  • What is that loud, grinding sound?

    Had my computer, MacBook, on all day.  Connected to power all day too.  Later, about early evening, the house was a little warmer and I tried to put MacBook to sleep when a very loud, almost grinding sound was coming from the laptop.  It almost seemed like the sound was coming from the battery compartment but not sure.  It was not a drive sound, nor fan sound, or CD drive sound, nothing like that- much louder and nasty sounding.  So has this happened to anyone else and does anyone know what this could be?  All help appreciated and welcomed.  Thanks

    This could be the internal Hard Drive being a bit loud when it starts up or it could indicate a potential hard drive error.
    If you check the S.M.A.R.T status of your drive in Disk Utility it should give some indication (but not always).
    If the system works fine it's probably nothing to worry about, but you should probably speak to Apple Tech Support or make an appointment with an Apple Genius at your local Apple Retail Store just to be on the safe side.
    If you have an external drive available to you, make a back up of your system (so you don't loose anything) in case the drive does need replaced.

  • DV8T Fan grinding sound when opening lid or returning from sleep mode

    I don't know if this is a normal thing, but not always, Id say 50% of the time when the computer wakes or I open the lid there is a breif grinding sound coming from the top left area of the body of the notebook. I am pretty sure it is the fan and im wondering if this is going to eventually lead to a ballance issure with the fan causing it to fail and ultimatly kill the CPU.

    I'm having a similar problem that I may have cracked. My screen is on but the backlight is off (so the image is practically 100% on resume from hibernate. Have you reset the pram and cleared the smc?

  • When i put my bounced track to CDJ 900, the sound quality drops, Hi and Mid Pass sound like they "Shrink In", doesn't sound the same when playback in logic. I set my bouncing setup as highest.

    when i put my bounced track to CDJ 900, the sound quality drops, Hi and Mid Pass sound like they "Shrink In", doesn't sound the same when playback in logic. I set my bouncing setup as highest.

    Hi Eriksimon,
    Firstly, thanks for your message.
    What I meant by "hi pass mid pass shrinking in" is EXACTLY what you menat, I got a heavy bass and muffed high and mid content. Apologised for my poor English.
    I haven't checked the setting of the playback device yet but instead I tested it with some professional produced tracks. I know the sound tends to vary a little bit when playing from computer and CD player such as the CDJ 900 that I am using. The differences were not as significant as my own track. They tend to get a rather good balance. My track is well balanced and mixed (I guess) in Logic but it turns out completely different when using the CD player.
    I bounced my work to MP3 with highest BIte Rate.

  • Grinding Sound/Frozen IPod

    I connect my ipod to the computer and it starts updating, but then it makes a grinding sound, then freezes, then makes a beeping sound and tells me its out of battery and needs to be connected, despite the fact it is connected to the computer and the little battery meter shows its charging. Then it disappears from ITunes as though its not there. Help!!!!!

    I have the same problem with my IPod 20GB... i have a weird buzzing sound inside my IPod and it's frozen... there is a smiley-face who's looks dead...
    Please help me if you can...

  • Video clips lost its sound when burned from idvd6

    HELP! I created a 55 min. imovie and when I burn it using idvd6 some of the clips loose their sound completely. The clips play in preview mode both in imovie and idvd. It's after its burned and played on my TV where the sound is gone on only some of the sclips. On others it's fine.
    The clips came from VHS tape dumped on to a Hi 8 tape and then imported through a firewire into imovie. But again I stress some of these VHS clips play just fine. Any ideas? I need this for a High School Graduation party (which is going to be the main entertainment) for July 7. Thanx

    I've also got same problem. Interestingly enough, background music added to DVDs title page plays OK on the burned CD (everything previews perfectly). However, go to 'play' the burned DVD, and while the video is there, the audio tracks are silent. Source material is an iMove project, and audio tracks are all AIFF files.
    Also tried physically burning the DVD with Disk Utility. DVD burns OK, but on playback (both on home stereo DVD player, and on Mac), title slide and background music works fine, but after selecting to play the movie, the audio tracks are all gone... only silence This is with burning directly from iDVD, or by saving the project as an img file, and then burning it to DVD via Disk Utility.
    Any clues appreciated!
    iMac   Mac OS X (10.4.10)  

  • No sound after burning

    I've been searching this forum, and followed most, but still have this problem.
    I'm attempting to burn a "purchased" playlist in Toast Lite. iTunes is set to audio cd . The disk is a Memorex CD-R. I drag the playlist to the Toast interface. All songs load and show they are now AIFF files. I hit the burn button and all goes well. Disk burns and says its finished. I eject and re-load for playback. Disk shows in itunes, with all songs present. But, alas when I hit Play, nothing! No sound. Seems I've tried every combination of burn, only to wast 5 or 6 CD's.
    Thanks for any help... anyone?
      Mac OS X (10.3.9)  

    Only iTunes can burn audio CDs from music purchased from the iTMS. Since you're not running Tiger, which adds much better support for third-party optical drives, your best bet might be to try Patchburn (a Google search will lead you to the right place) in order to get your drive recognized by iTunes.

  • Grinding sound in refurbished 60 GB video iPod

    I just got a refurbished video iPod, and in playback when I start the first song, or switch songs to a new album, I'm getting some minor grinding and whirring noise and vibration. It doesn't seem to happen when it switches between artists or albums in shuffle mode. And it doesn't happen once I'm playing consecutive songs on the same album. Should I be concerned? My fourth generation iPod never made a sound (except for music).
    Dell Dimension E510   Windows XP  

    I just got a refurbished video iPod, and in playback
    when I start the first song, or switch songs to a new
    album, I'm getting some minor grinding and whirring
    noise and vibration. It doesn't seem to happen when
    it switches between artists or albums in shuffle
    mode. And it doesn't happen once I'm playing
    consecutive songs on the same album. Should I be
    concerned? My fourth generation iPod never made a
    sound (except for music).
    Dell Dimension E510   Windows XP
    Personally i would be concerned. that is not normal.. I would send it back to apple and have them take a look at it.

  • IDVD burning - but playback shutters

    Recently I made a quick 8:31 slideshow using iDVD.
    I added a 3:36 mp3 file for background sound (which will loop). I select the Road Trip template in 4:3 and then completed the slideshow. Burned it and then played it in a DVD player.
    The sound and slideshow hesitates at around 6 min and then continues to play after a few seconds. I have burned 4 DVDs in a verity of different ways.
    I burned direct and burned off of a image. Either way the DVD hesitates and then plays at around 6 min.
    Weird. Any ideas?
    iMac Mac OS X (10.4.6) I do it all...

    Paul,
    The problem is that iDVD treats slides in a slideshow as chapters (thus the old 99 slide per slideshow limit because there is a limit of 99 chapters in a Track).
    Some set top DVD players don't handle the audio well at chapter breaks. The only way to insure continuous audio is to create a slideshow movie in iPhoto of iMovie.
    It certainly seems to be a bug and I have reported it. Also willing to send the DVD project to Apple for review. This is a problem that deserves attention.
    It's not reall a bug in iDVD - it's a bug in the way some manufacturers DVD players treat the multiplexed video/audio stream. Things have worked this way since the first version of iDVD.
    Also, during playback while in iDVD the problem does not manifest.
    The Preview playback function in iDVD is ONLY for checking that the menu structure works the way you expect it to. It tells you absolutely NOTHING about the finished disc quality because it simply plays back the original content.

  • My Music Sounds Distorted Upon DVD Playback

    Anytime I create a movie and burn it in iDVD, I have to drop the movie in as a slideshow in order to keep the aspect ration and not have portions of my picture and text cutoff on the tv. The problem however is that when I play my movie the music is always very distorted, as if it was recorded at too high a volume.
    In the slideshow option I have moved the volume all the way down to (min) but still find I get a distorted playback sound. Can anyone offer up suggestions?

    Figured I'd bump this back up and hope for suggestions. Really dont want to have to go back to PC for this stuff. Ugh!

Maybe you are looking for

  • JAVA_HOME & CATALINA_HOME

    I just want to know how to set environment variable on JAVA_HOME and CATALINA_HOME on windows 2000. I tried to run the setup of jakarta-tomcat-4.0 but I encounter an error because of this. Thanks

  • Why I can't switch on more than three add-ons in one time?

    One day when I lanched Firefox, I saw that some add-ons are diseabled. I tried to enable it, but after Firefox restart it's still as it was. Please help!

  • Windows 7 and warranty

    Hi, My hubby bought me a 3000 N500 with Windows Vista Home Premium already installed from one of our local PC stores, PCZone, for my birthday in March 2009. I HATE using Vista and would like to upgrade to Windows7. Is this possible, and if so, where

  • A jsp which shows that session state is replicated ?

              Hello,           I am making a simple jsp to show if session state is being correctly replicated.           I just remembered seeing one somewhere before.           It showed the server-name, and the number of request so far in the session.

  • Oracle report 6i(some problems,when running thru internet)

    how can i fixed the page size of report(when i am running thru internet) i fixed the vertical elasticity of outmost frame(in layout) is fixed and in layout's main section height is 11.50 inch (physically it takes 8.50 inch) ,when i am running it in s