Methods and Tools for checking IVI driver

What methods are used to check an IVI driver at the end of the development phase?
Are there any tools available?

National Instruments has developed the Specific Driver Test Suite that checks the behavior, compliance, structure, and function panels of an IVI driver written in LabWindows/CVI or C.
Please refer to http://zone.ni.com/idnet/development.htm for more details about this test.

Similar Messages

Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?

Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?
I found one such tool "Fortify" in the below link. Are there any such kind of tools available which supports SharePoint?
Reference: http://www.securityresearch.at/en/development/fortify/
Amalaraja Fernando,
SharePoint Architect
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

Hi Amalaraja Fernando,
I'm not sure that there is one more tool that combines all these features. But you may take a look at these solutions:
SharePoint diagnostic manager
SharePoint enterprise manager
What is SPCop SharePoint Code Analysis?
Dmitry
Lightning Tools Check
out our SharePoint tools and web parts |
Lightning Tools Blog | Мой Блог

Satellite A100 - Need 64bit drivers and tools for Windows 7

Hi,
I have W7 RTM from Technet, and I was install 64bit edition on my laptop "Satellite A100 (PSAA9)" I need 64bit drivers and 64bit utilities (Value Added Package,..) but I can not find them... 32bit Value Added package not work on 64bit (installation is rejected ) :/
Sorry, my english is very very bad
Thanks for any advice

Hello
I have checked the Toshiba website and there I cant find drivers and tools for 64bit OS. So I think Akuma is right you should 32bit OS on an old system like Satellite A100. The Toshiba website offers all drivers and tools for Vista 32bit and most of them should also work on Windows 7.
Alternative you can download the drivers and tools from another notebook model that is very similar to yours.
Just search a little bit. :)
Greets

Which are methods and FM for Catsdb for BAPI

which are methods and FM for Catsdb for BAPI
Thank you,
points will be rewarded

Hi Jagrut,
BIW_CATS_CUSTOMER_EXIT
BIW_CHECK_CATS_DATA
BIW_CHECK_CATS_DATA2
BIW_DELTA_CHECK_SELOPT
BIW_DELTA_CHECK_SELOPT2
CATS_APPROVAL0
CATS_BIW_DELTA
CATS_BIW_TIMESTAMP_DELTA
CATS_BUILD_CATSD
CATS_CHECK_CONSISTENCY_AT_SAVE
CATS_DISPLAY_ALV_LIST
CATS_DISPLAY_TARGET_DOCUMENTS
CATS_DISPLAY_TARGET_DOCUMENTS0
CATS_READ_ARCHIVED_DATA
CATS_READ_INTERFACE_ACCOUNTING
CATS_READ_INTERFACE_LOGISTICS
CATS_READ_TIMESHEET_DATA
CATS_SAVE_INTERFACE
CATS_SHOW_LIST
CATS_TRANSFORM_FREE_RECORDS
EXIT_SAPLTSBW_001
READ_INTERFACE_CPR
Reward if useful!

What's the best commercial clean up tool for the hard drive.

What is the best commercial, clean up tool for an internal hard drive. Mine is rapidly being filled and I'm at a loss as to how to clean it up. I don't know what apps, downloads etc are current or pertinent. I suspect that I have a lot of redundency, but I'm not confident in knowing what they are. My hard drive is approx. 93% filled and I'm rather concerned.

I downloaded the free trial of EasyDuplicatFinder and tried it. Works great and is pretty easy to get the hang of it. Found lots of iTunes duplicate songs that I dumped and freed up quite a bit of hard drive space. Check it out.
http://www.easyduplicatefinder.com/

Data Rescue II AND Disksaver for failing hard drive?

I need some guidance on rescuing data from an internal hard drive that Disk Utility could not fix. (The drive is making an odd noise, and apparently has a mechanical problem.)
Data Rescue II appears to successfully cloned my iMac's drive, while Carbon Copy Cloner and SuperDuper froze when I attempted to use them on it.
I just finished my cloning of the problem drive with Data Rescue II last night, and I'm debating my next step. I bought Diskwarrior as well, but haven't opened the box yet.
Should I now use Diskwarrior to build a new directory for the clone, or is that new directory generated by the Data Rescue cloning? Also, can you boot from the clone created by Data Rescue II?
I'm thinking of having a replacement drive installed in my iMac, then cloning back to it from the clone I made last night, if it's healthy. Any thoughts?

Gary,
Always interested in drive failures (and trying to avoid 'em!)
Saw a link on StorageReview to a study done by Google:
Predicting hard drive failures
Its a study by some Google employees on the failure rates of disk drives deployed within their infrastructure.
Failure Trends In A Large Disk Drive Population
Examining the population of hard drives under deployment within Google
* In general, there are around four ways a HDD will fail. Firmware zone corruption, electronic failure, mechanical failure, and logical corruption. Unfortunately, S.M.A.R.T only handles a subset of the "mechanical failure" category (mainly media failure and thermal failure), and does not protect against single instance/incident catastrophic mechanical errors (head crash, spindle/servo motor failure, stick-shun).
* I was surprised about the lack of correlation found between elevated temperature and expected drive reliability. The graph only went up to 50 C, though, and I would expect a much stronger correlation once the temperature reached beyond typical max temp specs.
* I give props to the google crew for their SMART correlation analysis. I would have loved to see a quick postmortem on all of the failed drives to determine cause, and a breakdown into the top four categories.
* Side note, logical corruption may lead to data loss, but it does not necessarily mean that the HDD has failed.
Findings:
* After a first scan error, drives are 39x more likely to fail within 60 days.
First errors in reallocations, offline reallocations, and prob ational counts are also strongly correlated to higher failure probabilities.
* A large fraction of our failed drives have shown NO SMART error signals watsoever.
* There was a lack of a consistent pattern of higher failure rates for higher temperature drives for for those drives at higher utilization levels.
* Some of the charts point to drive failure early on, a "survival of the fittest" perhaps.
http://labs.google.com/papers/disk_failures.pdf
SMART is not that reliable at predicting, of course if it shows a problem, it is just that much worse. I try to torture and kill a drive right off the bad, if it survives the first week of abuse, it is probably going to survive anyway. But being paranoid, never leave data to chance, assume that it will some day fail or at least need to be reformatted or retired.
Mac Pro 2GHz 4GB 10K Raptor 23" Cinema Mac OS X (10.4.8) WD RE RAID DW 4.0 APC RS1500 Vista

What is suitable method or Tool for Generate Reports or Inovice?

Which Tool or Class is suitable for Generate Reports or Inovice?
i hope to make some reports and invoice for my project,
but i don't know what is suitable class to generate and show report and invoice.
can you give me some advice?
thanks!

My report consists of one main repeating frame containing about 15 (detail) repeating frames. The main frame starts a new page each time the deposit (master record) changes and resets the physical page number at the top of the page. In the property palate, I have Source set to my deposit number and Maximum Records per Page set to 1 and this results in the start next deposit on a new page.
I can't find any 'BREAK' command that would result in the action I need - and there seems to be nothing in the SRW_package or conditional formatting that might help.
What I was hoping was that there would be a command somewhere that I have missed, that would cause a new report to be written each time the deposit (or master record) changes, rather than one huge report.
Thanks for the suggestion
Glenn

Known Issue: Setup warnings for Windows 10 SDK, Emulators for Windows Mobile, and Tools for Windows 10 Universal Apps (Windows 10 Insider Preview SDK and tools, April 2015 release)

When you install Visual Studio 2015 when not connected to the internet, for example from an ISO, you may receive warnings after setup completes for Tools for Windows 10 Universal Apps, Windows 10 SDK, and Emulators for Windows Mobile. These warnings include:
This product did not download successfully: The server did not return the file size.
This product did not download successfully: Signature verification failed on downloaded file.
This product did not download successfully: HTTP Status 502: The server….

To fix this issue, your computer must be connected to the internet to download these components.
Make sure your computer is connected to the internet.
Open Control Panel, and select Programs and Features.
Select Microsoft Visual Studio 2015 RC, click Change, and then click
Modify.
Select the feature “Universal Windows App Development Tools”, and click
Update.

Tool for checking EJB compliance

Hi,
Is there a tool in WL server 6.0 for checking .jar files for EJB1.1 (EJB2.0) compliance. I'd appreciate
something like EJB Deployer Tool from WL 5.1 checking compliance feature.
thanx
josef vavra

Thanks for the suggestion, but this tool seems to not have this abilty. Isn't there some non-Java way to check this, like the command line tool to check which ports are being used by applications (forgot the exact name :) ).

FM for checking valid drive on PC

Hi all,
I am developing an interface.
There is one file which is to be uplaoded in my code. I am doing some processing on that code and downloading that file on PC.
User will enter the input & output file name. When user will enter the path I want o check for the drive. Means if user has only C & D drive on my PC & user has given F drive while giving the output file name then it should give error.
Is there any FM or method available for this? I have tried with FM "PC_CHECK_PATH_WITH_DRIVE" but it is not giving me desired result.
Please help.... Its urgent....
Thanks in advance.
Deepti

Hi Deepti,
1. file_not_found                  = 19
2. sy-subrc = 19 if drive is wrong.
3. It surely gives error (by value of sy-subrc <> 0)
   after the FM is called.
4. try this code (just copy paste in new program)
5. It WILL GIVE ERROR
6.
REPORT abc.
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
SELECT * FROM t001 INTO TABLE t001.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE                    =
    filename                        = 'k:\abc.txt'
FILETYPE                        = 'ASC'
APPEND                          = ' '
WRITE_FIELD_SEPARATOR           = ' '
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = ' '
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
WK1_N_FORMAT                    = ' '
WK1_N_SIZE                      = ' '
WK1_T_FORMAT                    = ' '
WK1_T_SIZE                      = ' '
IMPORTING
FILELENGTH                      =
TABLES
    data_tab                        = t001
FIELDNAMES                      =
EXCEPTIONS
   file_write_error                = 1
   no_batch                        = 2
   gui_refuse_filetransfer         = 3
   invalid_type                    = 4
   no_authority                    = 5
   unknown_error                   = 6
   header_not_allowed              = 7
   separator_not_allowed           = 8
   filesize_not_allowed            = 9
   header_too_long                 = 10
   dp_error_create                 = 11
   dp_error_send                   = 12
   dp_error_write                  = 13
   unknown_dp_error                = 14
   access_denied                   = 15
   dp_out_of_memory                = 16
   disk_full                       = 17
   dp_timeout                      = 18
   file_not_found                  = 19
   dataprovider_exception          = 20
   control_flush_error             = 21
   OTHERS                          = 22
IF sy-subrc = '19'.
WRITE :/ 'FILE NOT FOUND - '.
ENDIF.
regards,
amit m.

Which methods are mandatory for a JDBC driver

Hello,
I have seend that there a lot of JDBC API calls which either return nothing or throw an AbstractMethodException on various JDBC drivers.
For example: the ResultSetMetadData.getTableName(int) always returns an empty String with the JDBC driver for Oracle, MS SQL Server (iNet driver), Postgres and Firebird.
Is there any documentation on which methods have to be implemented?
Thanks in advance
Thomas

There is this
http://java.sun.com/products/jdbc/driverdevs.html
I am pretty sure that there is little in the meta data stuff that has to be supported.

Any automated tests or tools for checking if codes are cluster-ready?

Hi folks,
          Are there any tools that can comb through the codes (.java & .jsp) to check for any non-compliances for clustering?
          Or, is there any checklist around to follow if eye-ball checking is required?
          Many thanks.

You can do simple manual testing like:
          1) Start testing the app
          2) Bring down the primary server
          3) Continue testing
          With the above test, end user should not be lose any session information.
          Even if the primary server is down, the Http Sessions should be preserved and should continue uninterrupted.
          Vijay
          Motorola Ebusiness

Windows 8.1 and looking for DeskJet 882C Driver

I am upgrading to Windows 8.1 and need a driver for an DeskJet 882C Printer. Any ideas where I find one?

There is no full feature software for this printer in WInodws 8/8.1 but it does have an in-OS driver. Click on the link below and it should help you get your printer working.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03460648&cc=us&dlc=en&lc=en&os=4132&product=593...=
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Tools for checking DNS & OpenDirectory happiness

I'm trying to troubleshoot what I think is a DNS problem that is effecting OpenDirectory and single sign-on. Host and client both resolve $ host hostname.domainname.com to the right IP and vice verse from IP to hostname... nslookup seems to give accurate info back as well...$ klist shows one valid kerberos ticket (shouldn't there be more? one for mail, one for iChat, etc??).
Anyway, are there other places I could/should be looking to find out why single sign-on has recently broke. I did make a small change to DNS before the breakdown but DNS appears to be fine...and machine appears to be bound to the server (green light).
cheers!

Hi
changeip, scutil and dig are others. Consult the manual pages.
Tony

A5000 and support for 36GB hard drives

Sunsolve says A5000 supports 36GB drives.
is anybody using those on A5000?
Are there any issues?

To be quite honest, I don't know. I would assume that there would be no problems, but I don't like to assume. I would try it in a heavy-load testing environment.

Methods and Tools for checking IVI driver

Similar Messages

Maybe you are looking for