Methods to report backup status of CUCM
Is there any methods out there that allows the reporting of CUCM backup status via DRS. I want to report on backup status (eg the backup history page in DRS). I can't see any way of getting this info out apart from scraping the DRS Web page. Checked the data dictionary for any tables that might contain job history but nothing is too obvious atm.
I realise you can get the system to email out job failures/issues but there seems to be no way to email status whether it be success or failure.
Cheers
Nathan
Hello Agathe,
Would you mind telling me how you are getting the SNMP trap notifications for DRS? I'm in the same situation would like to know if there is a MIB/OID which can be checked. I know you can send the syslog message under alarm->drs and send to a remote syslog server. But would much rather be able to via SNMP to alert on failures.
Similar Messages
-
Rman consolidated backup status report
Hi,
I am trying to write a script which collects the backup status report from all specified servers and all databases in each server. So if i run from one server, it should log on to all servers and get database reports.
I think, i need select from rman view's.....
sample output
"DB INCR 0" dbname_server Compl: 2010-12-04 12:56 Length: 0 hr Age: .77 days
"ARCHIVELOG" dbname_server Compl: 2010-12-05 03:04 Length: 0 hr Age: .18 days
Any help is apprecieated
Edited by: 812261 on Dec 8, 2010 12:44 PM992762 wrote:
hi 812261,
I'm also in need of a similar report, can u pls share the script that you have(perl). this would be highly helpful for me.Did you notice that you were responding to a two year old thread?
Did you read Dan's comments regarding a catlog?
>
u can email that to <snip>
thanks,I've snipped out your email address in my reply. I suggest you do the same in your own post. That is unless you actually enjoy the offers to help move money out of Nigeria, and to purchase certain, umh, "enhancement" products. Putting your email address on a public forum does nothing but expose it to every spambot crawler on the planet.
Edited by: EdStevens on Mar 22, 2013 3:20 PM -
Required to take periodic backup status report from SQL server
Dear All,
I need to take periodic database backup status of all sql server instance in different domain. But, i am doing it by logging into all sql server manually.
We can do it through option called ' Managed server' in sql server by connecting required server.
But, I want to know the script and any other option in sql server to connect all sql instance in different domain group to take backup status report in single run.
I need your help here and share the experience if you implemented ever in your environment.see
http://www.mssqltips.com/sqlservertip/1601/script-to-retrieve-sql-server-database-backup-history-and-no-backups/
You can use above scripts to capture the information
For automated execution wrap it in a procedure with INSERT statement to dump the results onto a table and call the procedure from sql agent job to execute it based on a predefined schedule.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Backup status reported incorrectly
Using Windows SBS 2008, following recreating a partition (D:) which had reverted to RAW from NTFS, I needed to restore the last good backup, which appeared from the SBS Console/Server Backup Properties/Previous Backups to have successfully backed up drives
C: and D:. When moving to restore, I find that this backup was completed with warnings. Expanding this line, it reports an error: "D: Incorrect function". When I look back through the history of the connected backup drive,
I find that it has only backed up the C: drive even though the backup configuration has always been set to back up both C: and D:. As D: drive is the drive which holds all of the data, everything appears to be lost! Is there any way to recover
any of this data?Using Windows SBS 2008, following recreating a partition (D:) which had reverted to RAW from NTFS, I needed to restore the last good backup, which appeared from the SBS Console/Server Backup Properties/Previous Backups to have successfully backed up drives
C: and D:. When moving to restore, I find that this backup was completed with warnings. Expanding this line, it reports an error: "D: Incorrect function". When I look back through the history of the connected backup drive, I find that
it has only backed up the C: drive even though the backup configuration has always been set to back up both C: and D:. As D: drive is the drive which holds all of the data, everything appears to be lost! Is there any way to recover any of this
data?
Why does SBS Console report backup as successful when it appears that it is NOT successful? -
Hi all,
Just a question with regards to RMAN. We call RMAN via a standard shell script, however, looking for advice on how to best determine if the backup was succesful or not.
Is it enough to just check the exit status of RMAN, e.g. (simplified)
rman target / @level0.rman
if [ $? = 0 ]; then
echo "Backup Succesful"
else
echo "Backup Failed"
fi
or is it advisable to, after the backup, check v$rman_status or similar to get a thorough picture of the backup status.
Our RMAN script is similar to follows (note, not in a run statement)
BACKUP INCREMENTAL LEVEL 0 DATABASE FILESPERSET 4
PLUS ARCHIVELOG DELETE INPUT;
sql 'ALTER DATABASE BACKUP CONTROLFILE TO TRACE';
sql "CREATE PFILE=''/somedir/spfile.backup'' FROM SPFILE";
sql "ALTER DATABASE BACKUP CONTROLFILE TO TRACE AS ''/somedir/controlfile.backup'' reuse";
As it's not in a run, my concern is that, the BACKUP INCR. may fail, but if the following commands succeed, will RMAN return a 'good' exit code or 'error' exit code
Thanks for your help.I have the same "simplified" exit code checking method setup as the original poster, but there are many errors that do not affect the overall status but are still reported as failure. For example, if one of the allocated channels fails during the backup, other channels pick up its workload and finish the backup, so the backup is valid, but my script reports failure anyway. Does anyone a good way to bypass those errors and report such backup run as success rather than failure?
-
ACS 5.4 backup status in syslog
Have raised a TAC for this but thought I'd post here too.
We are running ACS v5.4 Patch 1.
We have noticed that ACS will not produce syslog messages about scheduled backups (success or failure)
(1) From the GUI, under “System Administration > Configuration > Log Configuration > Remote Log Targets”, we have configured a remote syslog host.
(2) Then, each logging category under “System Administration > Configuration > Log Configuration > Logging Categories > Global”, we have configured everything to log to the remote target.
(3) However, no messages regarding successful or failed backups ever arrive via syslog.
Backup status can be checked by running “show backup history” from the CLI.
However, syslog communication between ACSView and ACS show backup status OK.
You can find backup information in ACS View under:
Monitoring & Reports > Reports > Catalog > ACS Instance > ACS Operations Audit
We have one quite simple requirement – that ACS produces syslog messages stating backup success and failure. This will drive our alarm system.
Has anyone else got this to work?
Pretty simple request - backup success/failure in syslog messages!
Forcing the output of ade.log to syslog would also do it. Would rather not hack around under the covers with root patch though.
Cheers!Hi Rob,
I was going through your requirement and that seems to be an important notification. If we look at the ACS 5.4 guide > under logging categories. It does talk about ACS operational changes—Logs all operations requested by administrators, including promoting an ACS from your deployment as the primary, requesting a full replication, performing software downloads, doing a backup or restore, generating and restoring PACs, and so on.
Administrative and operational audit log messages are always sent to the local store, and you can also send them to remote syslog server and Monitoring and Reports server targets.
Log messages are sent to the local store with this syslog message format:
time stamp sequence_num msg_code msg_sev msg_class msg_text attr=value
Log target and logging categories.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/user/guide/logging.html#wp1052656
Since you've configured ACS logging categories to log everything. It should work fine. Can you see the same message success or failure under local store logs of ACS. If we can see it there it means ACS is sending it, after that we can check in the log forwarder file and run the packet capture on the syslog server.
~BR
Jatin Katyal
**Do rate helpful posts** -
Backup Status for Multiple SQl Servers.
Hi All,
What changes are required in the below script - so that it displays the backup result for
multiple SQL SERVERS.
--Databases with data backup over 24 hours old
SELECT
CONVERT(CHAR(100), SERVERPROPERTY('Servername')) AS Server,
msdb.dbo.backupset.database_name,
MAX(msdb.dbo.backupset.backup_finish_date) AS last_db_backup_date,
DATEDIFF(hh, MAX(msdb.dbo.backupset.backup_finish_date), GETDATE()) AS [Backup Age (Hours)]
FROM msdb.dbo.backupset
WHERE msdb.dbo.backupset.type = 'D'
GROUP BY msdb.dbo.backupset.database_name
HAVING (MAX(msdb.dbo.backupset.backup_finish_date) < DATEADD(hh, - 24, GETDATE()))
UNION
--Databases without any backup history
SELECT
CONVERT(CHAR(100), SERVERPROPERTY('Servername')) AS Server,
master.dbo.sysdatabases.NAME AS database_name,
NULL AS [Last Data Backup Date],
9999 AS [Backup Age (Hours)]
FROM
master.dbo.sysdatabases LEFT JOIN msdb.dbo.backupset
ON master.dbo.sysdatabases.name = msdb.dbo.backupset.database_name
WHERE msdb.dbo.backupset.database_name IS NULL AND master.dbo.sysdatabases.name <> 'tempdb'
ORDER BY
msdb.dbo.backupset.database_name
Thanks..!!Hi Prashanth,
what location do I need to provide for SQL Server for link: http://blogs.technet.com/b/heyscriptingguy/archive/2011/05/02/use-powershell-to-report-sql-server-backup-status.aspx
{ $location = "SQLSERVER:\SQL\$SQLInstance\Databases" }
else
{ $location = "SQLSERVER:\SQL\$SQLInstance\DEFAULT\Databases" } ?? -
Timemachine backup status on multiple macs?
Hi,
I am backing up a little below 10 machines with Timemachine on a network drive.
I would like to create a small weekly report to see when the last successful backup was done on each mac.... but cannot find anything on this?
Is there a shareware that could that? Or a little script?
Tx for your help!
Nicolas
Message was edited by: nico_147Hi Prashanth,
what location do I need to provide for SQL Server for link: http://blogs.technet.com/b/heyscriptingguy/archive/2011/05/02/use-powershell-to-report-sql-server-backup-status.aspx
{ $location = "SQLSERVER:\SQL\$SQLInstance\Databases" }
else
{ $location = "SQLSERVER:\SQL\$SQLInstance\DEFAULT\Databases" } ?? -
How to generate a MSDS report from status GP (Generation possible) to RE
Hi EHS Goeroes,
I'm struggling with the Generation of the MSDS. I have done the following procedure and settings:
a) Create MSDS report (CG42)
b) Edit Generation Variant (CG2B)
Settings:
(I have assigned my template to the Generation Variant)
Generate manual request automatically: marked
Change Marks: 0
Initial release status: RE (released)
Version requirement: unmarked
Set historical automatically: unmarked
c) EHS > Specification Workbench > Report from Template (to test the design - display is correct and all phrases can be found)
d) EHS > Specification Workbench > Create new report
(report has been created succesfully and appears in Report Management).
e) EHS > Specification Workbench > Report Management:
MSDS_29 Material Safety Data Sheet for China World
Chinese Not Relevant Generation Poss. => generation possible.
Feedback affter clicking on Accept: You tried to carry out action 'Accept' on a report with status GP. However, this action is not allowed for reports with this status.
Feedback after clicking on Generate: You tried to carry out action 'Generate' on a report with status GP. However, this action is not allowed for reports with this status.
d) SE38 I have no jobs scheduled yet, so I run the following two programs to start the worklist manually, RC1AVGE1 and RC1AVGE2.
RC1AVGE1 - gave allot of feedback information regarding to changes and so on (first time I run it).
RC1AVGE2 - feedback: EHS: 'Worklist Generation for Reports - Selection for Check. - 0 reports to be checked were found'
From my understanding program RC1AVGE2 - should generate the MSDS.
e) WWI - monitor display (CG5Z):
100 @03\QNo background processes in client@ 5 SBR WWI-00000000000000000002 FREE RMDERKS
110 @03\QNo background processes in client@ 5 SBR WWI-00000000000000000063 FREE A132645
xxx SV001 @5B\QWWI server is active@ @02\QNo background processes on WWI server@
xxx SV003 @5C\QWWI server is inactive@ @02\QNo background processes on WWI server@
I checked if I had any jobs running in the background or has been finished, but it seems like it goes wrong here, the system does not generate a job for the generation of the MSDS_29. To be able to get the status of MSDS_29 to RE (Released).
Does anybody has an idea what I do wrong, or which settings might be incorrect? Futhermore, what are the further steps to issue the report in the SD module - report shipping?
Help is much appreciated!
Roy DerksHi Roy,
Check and activate the QWWI server for the second job wwi - 110. Try once to generate the MSDS.
I will revert back if i get information.
regards,
mahesh. -
Report on "Status updates history"
Hi,
i need to check if resource are updating task from "My Task". Is it possible to estract a report on "Status updates history"?
I mean this type of data:
Approval Date
Action
Status
Info
Task Name
Project
Type
Start
Finish
Actual Work
Remaining Work
% Complete
Assigned To
Approved By
Thanks
DanieleHi Daniel,
You will probably have to create a join with the MSP_ASSIGNMENT_TRANSACTIONS Table.
See reference here:
http://blogs.msdn.com/b/project_programmability/archive/2008/01/03/statusing-transactions-partial-documentation.aspx
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS -
CPH Reports for Status Attribute.
Using Central performance History (RZ23n), is it possible to create reports for Status attributes?
Eg: I want to create for number of abap dumps, dead locks for each day.
As per documentation it says we can create for performance values and we are able to create CPH reports for R3Dialog Response time...
http://help.sap.com/saphelp_nw70/helpdata/en/c2/49773dd1210968e10000000a114084/content.htm
Any help or ideas are appreciated.
Thanks,
Venkat.Thank you Shyam for so prompt reply,
We are using the same report. But its bit uneasy to go to change document of each and every ticket. Also in this report we could not find how much days the notification lay in New status or in In-process status. We require somewhat in following format.
Ticket number New Customer action In-process
000001 1Day 1.3 Days 1 Day
000002 1.3 Days 2.3 Days 1 Day
000003 3 Days 3.4 Days 1 Day
We are not bothered about days, week or hours etc. The purpose is to indentify how much time every ticket took stage wise. May be through ABAP this possible but we are looking for standard reports.
Thanks
Anand Rao -
Backup error; datafiles is already in backup status
Dear Experts,
While we are starting online db backup, we are getting following errors;
BR0280I BRBACKUP time stamp: 2009-07-13 02.16.07
BR0319I Control file copy created: /oracle/TBP/sapbackup/cntrlTBP.dbf 34783232
BR0328E Database file /oracle/TBP/sapdata1/system_1/system.data1 of tablespace SYSTEM is already in backup status
BR0328E Database file /oracle/TBP/sapdata1/undo_1/undo.data1 of tablespace PSAPUNDO is already in backup status
BR0328E Database file /oracle/TBP/sapdata1/sysaux_1/sysaux.data1 of tablespace SYSAUX is already in backup status
BR0328E Database file /oracle/TBP/sapdata2/sr3_1/sr3.data1 of tablespace PSAPSR3 is already in backup status
BR0328E Database file /oracle/TBP/sapdata3/sr3700_1/sr3700.data1 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file /oracle/TBP/sapdata4/sr3usr_1/sr3usr.data1 of tablespace PSAPSR3USR is already in backup status
BR0328E Database file /oracle/TBP/sapdata4/sr3700_2/sr3700.data2 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file /oracle/TBP/sapdata1/sr3_2/sr3.data2 of tablespace PSAPSR3 is already in backup status
BR0328E Database file /oracle/TBP/sapdata2/sr3_3/sr3.data3 of tablespace PSAPSR3 is already in backup status
BR0328E Database file /oracle/TBP/sapdata3/sr3_4/sr3.data4 of tablespace PSAPSR3 is already in backup status
BR0328E Database file /oracle/TBP/sapdata4/sr3_5/sr3.data5 of tablespace PSAPSR3 is already in backup status
BR0328E Database file /oracle/TBP/sapdata1/sr3_6/sr3.data6 of tablespace PSAPSR3 is already in backup status
BR0328E Database file /oracle/TBP/sapdata3/sr3_7/sr3.data7 of tablespace PSAPSR3 is already in backup status
BR0328E Database file /oracle/TBP/sapdata4/sr3_8/sr3.data8 of tablespace PSAPSR3 is already in backup status
BR0328E Database file /oracle/TBP/sapdata2/sr3700_3/sr3700.data3 of tablespace PSAPSR3700 is already in backup status
BR0328E Database file /oracle/TBP/sapdata1/sr3_9/sr3.data9 of tablespace PSAPSR3 is already in backup status
BR0328E Database file /oracle/TBP/sapdata2/sr3_10/sr3.data10 of tablespace PSAPSR3 is already in backup status
BR0328E Database file /oracle/TBP/sapdata3/sr3_11/sr3.data11 of tablespace PSAPSR3 is already in backup status
BR0328E Database file /oracle/TBP/sapdata4/sr3_12/sr3.data12 of tablespace PSAPSR3 is already in backup status
BR0056I End of database backup: beazuchh.anf 2009-07-13 02.16.08
BR0280I BRBACKUP time stamp: 2009-07-13 02.16.08
I've tried to take datafiles out of backup mode with following commands ;
SQL> select * from v$backup;
FILE# STATUS CHANGE# TIME
1 ACTIVE 492340220 05-JUL-09
2 ACTIVE 492340220 05-JUL-09
3 ACTIVE 492340220 05-JUL-09
4 ACTIVE 492340220 05-JUL-09
5 ACTIVE 492340220 05-JUL-09
6 ACTIVE 492340220 05-JUL-09
7 ACTIVE 492340220 05-JUL-09
8 ACTIVE 492340220 05-JUL-09
9 ACTIVE 492340220 05-JUL-09
10 ACTIVE 492340220 05-JUL-09
11 ACTIVE 492340220 05-JUL-09
FILE# STATUS CHANGE# TIME
12 ACTIVE 492340220 05-JUL-09
13 ACTIVE 492340220 05-JUL-09
14 ACTIVE 492340220 05-JUL-09
15 ACTIVE 492340220 05-JUL-09
16 ACTIVE 492340220 05-JUL-09
17 ACTIVE 492340220 05-JUL-09
18 ACTIVE 492340220 05-JUL-09
19 ACTIVE 492340220 05-JUL-09
19 rows selected.
SQL> select 'alter database datafile '
2 || file# || ' end backup;'
3 from v$backup where status = 'ACTIVE';
'ALTERDATABASEDATAFILE'||FILE#||'ENDBACKUP;'
alter database datafile 1 end backup;
alter database datafile 2 end backup;
alter database datafile 3 end backup;
alter database datafile 4 end backup;
alter database datafile 5 end backup;
alter database datafile 6 end backup;
alter database datafile 7 end backup;
alter database datafile 8 end backup;
alter database datafile 9 end backup;
alter database datafile 10 end backup;
alter database datafile 11 end backup;
'ALTERDATABASEDATAFILE'||FILE#||'ENDBACKUP;'
alter database datafile 12 end backup;
alter database datafile 13 end backup;
alter database datafile 14 end backup;
alter database datafile 15 end backup;
alter database datafile 16 end backup;
alter database datafile 17 end backup;
alter database datafile 18 end backup;
alter database datafile 19 end backup;
when we execute above script we are getting following errors;
alter database datafile 1 end backup
ERROR at line 1:
ORA-01235: END BACKUP failed for 1 file(s) and succeeded for 0
ORA-01234: cannot end backup of file 1 - file is in use or recovery
ORA-01110: data file 1: '/oracle/TBP/sapdata1/system_1/system.data1'
alter database datafile 2 end backup
ERROR at line 1:
ORA-01235: END BACKUP failed for 1 file(s) and succeeded for 0
ORA-01234: cannot end backup of file 2 - file is in use or recovery
ORA-01110: data file 2: '/oracle/TBP/sapdata1/undo_1/undo.data1'
alter database datafile 3 end backup
ERROR at line 1:
ORA-01235: END BACKUP failed for 1 file(s) and succeeded for 0
ORA-01234: cannot end backup of file 3 - file is in use or recovery
ORA-01110: data file 3: '/oracle/TBP/sapdata1/sysaux_1/sysaux.data1'
alter database datafile 4 end backup
ERROR at line 1:
ORA-01235: END BACKUP failed for 1 file(s) and succeeded for 0
ORA-01234: cannot end backup of file 4 - file is in use or recovery
ORA-01110: data file 4: '/oracle/TBP/sapdata2/sr3_1/sr3.data1'
alter database datafile 5 end backup
ERROR at line 1:
ORA-01235: END BACKUP failed for 1 file(s) and succeeded for 0
ORA-01234: cannot end backup of file 5 - file is in use or recovery
ORA-01110: data file 5: '/oracle/TBP/sapdata3/sr3700_1/sr3700.data1'
How can we take datafile out of backup mode ?
Regards
AtakanHi,
You can take out tablespace from backp mode from below sql.
SQL>ALTER TABLESPACE <tablespace name> END BACKUP;
Check Re: backup problem
Hope this helps
Thanks
Sushil -
Email alerts for CPU and Memory status of CUCM
Hi All,
can anybody help me here?
Will RTMT trigger the daily email notification for CPU and Memory status of CUCM? If yes, kindly let me know the procedure.
Thanks in advance !!!!Hi Hariharan,
In addition to Atul's link please refer the below mentioned link CPU and Memory usage
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/managed_services/cucm_health.html#wp1101115
Tx,
Hope this helps
Shalu -
Time stamps in reports and status are 7hrs off, is there a setting?
Time stamps in reports and status are 7hrs off, is there a regional setting to correct this?
When I run e-load all reports and any other time stamps are 7 hours off. (If I run a test at 9:20am pacific time the e-load shows 4:20pm). The e-test scripts show the correct time if I run those via e-test.
Is there a setting for this?
Thanks!Hi hagstal,
Actually, this is a known issue on Vista.
You need to edit the follwoing file to specify your timezone;
\Empirix\EmpAppServer\bin\JbossService.conf
Please refer to Known Problems section of e-TEST suite Release Notes for more details.
regards -
Time Machine reports, "backup failed." What do I do?
Time Machine reports, "backup failed." What should I do?
See if Pondini's great site helps...
http://Pondini.org/TM/Troubleshooting.html
Maybe you are looking for
-
Relational access to XML Content: can not display line level details
Hi folks, there is one record at the header level and two records at the line level in the xml data file. I created the following view and when i see the results, I see two records as expected but the value for the line level coloumns is null but the
-
How to customize row and column settings in BI report
Hi SDN, We have integrated EP702 and BI 704systems and uploaded BI roles into portal. Now i want to personalize BI report settins. There are 10 columns in BI report, but initially 4 columns are only displayed. But we want to display all the columns i
-
Cannot generate 4' x 8' banner proof due to Memory Error
My system info: Windows XP Illustrator CS2 (legit, not bootleg copy) 2.8 Ghz processor 2.5 Gigs RAM C: is 80 Gig with 40 Gigs free F: is 700 Gig HD with 600Gigs Free I designed a 4' x 8' banner from scratch in Illustrator. The file is 12.6 MB in size
-
Xming doesn't work with sapinst
Hello, Xming is installed on WinXP/Win7 and working very well (e.g. visual administrator, configtool). There is only a problem with sapinst. It starts without any error and the windows open, but nothing is clickable. Any ideas? Thanks
-
Can I get a report of all personalizations?
Hi everybody I received a R11 instance with little documentation. My duty is to upgrade to R12 but I need a list of all personalizations made in R11. I know that all is inside tables, so.. is there a single SELECT statement to get this list? Otherwis