MF50 not able to book Capacity  on Saturday and Sunday

Dear Experts,
  In MF50 planning table the  if we book  requirement on Saturday and Sunday .we are abel to book the requirement but "Not yet assigned" is gyred out system is creating a back ward scheduling to friday.
In work Centre we maintained factory calender ( all the days are working) and shift sequence.
Please let me know the settings.
Regards
Sandeep

Hi Sandeep,
Check your setting in T-code SCAL.
I think it might be require modification in days selection for Calender creation.
if any doubt then revert back.
Regards,
Mukesh.

Similar Messages

  • Not able to book Busines Event

    Im not able to Book Attendee for BUsiness Event, eventhough I have created Business Event & assigned to BUsiness event type
    1 BUsiness Event Group is there 50001830  Ability to Manage Change ->  01.01.1997 - 31.12.9999
    relationship with Business Event Type -GRID-POWER TO CHANGE - 50001882.
    Now when I go to TCode PV00 and select 50001882 and click on book i get message that
    Select a Business Event.
    Are there any standard setttings to be changed ,What is going wrong. can anybody tell me plz..

    HI,
    PLease create the business events in the future date you cant book the person for the events in the past.
    Regards,
    Kapil

  • Not able to edit the words "chapter" and "section" in the document workflow

    Hi all,
    I would like to point out something that could be a bug. The 2 words "chapter" and "section" are not editable in the document workflow: I can just change the title for each chapter and the title for each section, but I am not able to change the words "chapter" and "section".
    The problem is, iBooks Author is using the words "chapter" and "section" (heading 1) to build the TOC: if I am using iBooks Author in English, but I am writing a text in French, I am not able to change "Chapter" into "Chapitre". The only way to go, what I found out, is to close the app, change the OSX Lion system language, log out, re-open iBooks Author and start a new book: opening an English book  in the French version of iBooks Author will not change automatically the language in the workflow.
    Does anybody has a trick to edit the words "chapter" and "section"?
    Best regards,
    Mauro

    Hi KT,
    Thank you, but it's still in english.
    I changed to "only number", then wrote the word "chapter" in french or italian or german before the number, then deleted the preview on the iPad and made a new preview, I still have the same result: the word "chapter" is still in the language of the app. 
    To be clear: I am writing a text using iBooks Author in italian. I have to translate the same text in french, the fastest way would be to rework the italian version (I already have all the multimedia stuff inside). I changed the italian word "Capitolo" (chapter) to the french one "Chapitre" (using the advices of AodhFFXI and K T). And for the first slide of the chapter that's fine.
    But if I "close down" the first chapter slide or if I click on the top left botton to go to the chapter TOC, there I still have the word in italian, even if the word has been deleted in the layout:

  • Not able to get the minimize maximized and close button and its running with full screen mode.

    Hi
    My Thunderbird is running with ubuntu OS and while using some shortcut key my thunderbird mailbox switched to full screen mode. now i am not able to resize it's view and also not able to see minimize, maximize and close buttons on top left corner.
    Please help me out.
    Thanks

    I'm also running Ubuntu. Not sure how you got there, but you can try a Control-Q to quit. Then restart it and hope in comes back normal.

  • Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

    Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
    The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
    Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
    Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
    I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
    For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
    Thanks

    You got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
    Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
    When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
    Are you with me so far? - Yes.
    And @ Varjak is right that after the 3rd restore I get the replacement error. 
    Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Message was edited by: jabgars

  • I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

    I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
    Please suggest a solution or @Apple please get a software release which can remove this bug .

    We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • Not able to see Beat Audio software and mute light not glowing on fresh windows 8

    Hi, 
    I am using Laptop : HP ENVY 4 1046tx. I have installed fresh windows 8 on it. After that I have downloaded audio software from HP software site but that driver is not accepting. 
    1. I am not able to see Beat Audio software and equalizer setting in control pannel.
    2. When I am pressing mute button mute light (red light) is not glowing on button
    Thanks,
    Prabhat
    This question was solved.
    View Solution.

    Try the IDT Audio driver here:
    http://ftp.hp.com/pub/softpaq/sp58501-59000/sp5863​5.exe
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • HT4972 2nd generation ipod touch is pretty much no good anymore?  It is not able to upgrade to iOS5.1 and so will not work with many of the Apps now available in the App store.  Is there any way to find out which apps will work with 2nd generat

    2nd generation ipod touch is pretty much no good anymore?  It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store?  Is there a way to find out if the App will work before you download?

    Look to the app developer to provide that information when browsing the iTunes Store.
    The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
    If you aren't happy then sell it and buy a new one.

  • We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation approvers and controllers got migrated but we are not able to map new mitigation approver and controller to the mitigation ids.

    Hello All,
    We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation
    approvers and controllers got migrated but we are not able to map new
    mitigation approver and controller to the mitigation ids.
    The steps we have done below.
    1. We have created user id in su01 with necessary authorizations
    2. we have declared this user id in Access control owners as a
        mitigation approver and assigned to the organization unit
    Now we are trying to map to newly created mitigation approver to the
    mitigation id but we are not able to find that approver id for the mitigation ids. (only old mitigation ids came from VIRSA only we are able to see, not able to add new mitigation approvers / controllers to the mitigation ids)
    Kindly check this issue, this is very critical for us.
    Thanks in advance.
    Regards,
    Karunakar

    Hi Karunakar,
    - Assign Owners to Organization unit
    - Make these owners as Mitigation Approver and Monitor
    - Create Mitigation Id in this Org. unit
    Regards
    plaban

  • I am not able to download mp4 files (video and audio) to iTunes since I updated to iTunes 11.  Thanks for your help.

    I am not able to download mp4 files (video and audio) to iTunes since I updated to iTunes 11.  Thanks for your help.

    Thank you for clarifying. Your question is in your browser, not in iTunes. Each download link is different, and it has nothing to do with the File menu. You can save media files by secondary-clicking on the link to the media file and selecting Save File to "[your downloads folder".

  • There was start up glitch on desktop, which changed the computers configuration, which requires activation on Adobe Photoshop CS, but am not able to get throug activation system and phone support has been disconnected.

    here was start up glitch on desktop, which changed the computers configuration, which requires activation on Adobe Photoshop CS, but am not able to get throug activation system and phone support has been disconnected. How should I activate my software.

    You are entitled to the CS2 version that will work without activation, since the activation servers were taken offline. Read the instructions and follow them on this page.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

  • I am not able to get in sales order and delivery  24 hours

    Hi Frinds,
    i am not able to get in sales order and delivery  24 hours even i have defined pick pack time wrkdays 24hrs in
    CONFIG PATH:-Implementation Guide for R/3 Customizing (IMG) -> Logistics ->Execution->basic shipping Functions-> scheduling-> Delivery Scheduling and transporting Scheduling -> Define Scheduling by Shipping Point Or Transaction code:-OVLZ.
    Expected  Results:-Create sales order and delivery and check that the delivery The order has 24 hours after the transfer order is confirmed to allow time to pack order
    *can you help any body  to get in sales order and delivery  24 hours .
    Regards
    Madhu

    Dear Madhu
    Apart from OVLZ, you can also check in VOV8 where for your sale document type, check whether any value is maintained in the field "Lead time in days" at the bottom screen.
    thanks
    G. Lakshmipathi

  • Not able to see the history period and data

    Hello
    I have 2 time planning bucket periods - history of 24 months and future 14 months.
    have assigned both in the data view.
    i have loaded the data from infocube to planning area and i got the successful message.
    during the transfer i have used the key figure assignment feature and used my key figure which is zhistory.
    i have not used 9AVHISTORY.
    my issue is i am not able to see the history periods and hence not able to see the data in history.

    Hi
    The data get loaded and its also available in the planning area, as you defined the time bucket profile according it  i.e.24 month in past and 14 month in future. Its only while definition of data view you have not defined these flags you were unable to view this data.
    Hence as I mentioned data has correctly loaded in the planning area just not getting viewed.
    I hope this answers your question.
    Thanks
    Amol

  • I have reinstalled itune but i am not able to recover my previous apps and music

    i have reinstalled itune but i am not able to recover my previous apps and music

    Your apps and music are in your iTunes library, they are not in iTunes the program. iTunes is just the program that helps you to manage them. What did you do when you reinstalled iTunes, was this on a new computer? Please provide a little more information about what you did.

  • How to exclude 'Saturday' and 'sunday' In APEX 4.1 count(*)

    Hi everyone am using APEX 4.1,
    The Leave_transaction Table has the following Fields,
    1.Leave_id
    2.Emp_name
    3.From_date
    4.To_date
    5.Remaining_days
    The Emp_Master Table has the following columns,
    1.Emp_id
    2.Emp_Name
    3.Remaining_days
    select count(*) into days from (select dt
    from(
        select to_date(:p1_from_date, 'DD-Mon-YYYY') + rownum -1 dt
            from dual
    connect by level <= to_date(:p1_to_date, 'DD-Mon-YYYY') - to_date(:p1_from_date, 'DD-Mon-YYYY') + 1)
    where to_char(dt,'fmday') not in ('sunday','saturday') dual;
    If the Dates is between from_date and To_date comes in Saturday and sunday , it should exclude and return the count(*) remaining dates,
    For example,
    If the From_date is 04-may-2012'
    and To_date is 08-may-2012,
    Here the dates 5th may and 6th may are "saturday" and "sunday"
    Then the remaining dates are(excluding sat,sunday and dates in holiday_table),
    04-may-2012,
    07-may-2012
    08-may-2012.
    so
    count(*)
    3I am using the above code but still it returning 5,
    I think this
    ..where to_char(dt,'fmday') not in ('sunday','saturday')
    code is not working.
    Can anyone help me to solve my Issue.

    Hi theoa,
    Actually this is my full code,
    declare
          days          number(3);
         ex_days          emp_master.remaining_days%type;
          new_rem_days  emp_master.remaining_days%type;
        begin
          select count(*)
          into   days
          from   (select dt
                    from   (select to_date (:p1_from_date, 'DD-Mon-YYYY',
                                  'NLS_DATE_LANGUAGE=''english''')
                           + rownum - 1 dt
                       from   dual
                        connect by level <=
                       to_date (:p1_to_date, 'DD-Mon-YYYY',
                             'NLS_DATE_LANGUAGE=''english''')
                       - to_date (:p1_from_date, 'DD-Mon-YYYY',
                               'NLS_DATE_LANGUAGE=''english''')
                       + 1)
                   where  rtrim(to_char(dt,'fmDay', 'NLS_DATE_LANGUAGE=''english''')) not in
                       ('Sunday','Saturday')
                   minus
                   (select holiday_start
                 from   holiday_master)) dual;
    apex_application.g_print_success_message := 'Hi '||:APP_USER||' '||'You are applied leave for'||' ' || days||' ' ||'days';    
    select remaining_days
         into   ex_days
        from   emp_master
         where  upper(emp_name) = upper(:APP_USER);
         new_rem_days := ex_days - days;
         update emp_master
         set    remaining_days = new_rem_days
         where  upper(emp_name) = upper(:APP_USER);
         update leave_transaction
         set    remaining_days = new_rem_days
         where  upper(emp_name) = upper(:APP_USER)
         and    leave_id=
                  (select max(leave_id)
                   from   leave_transaction);
       end;The select statement which i mentioned above is working fine in database but not working in PAEX application.

Maybe you are looking for

  • Cannot get af:clientListener to work

    Hi, I'm trying to use a clientListener in order to change a value of an outputText. This is actually an example i found in the forum, but I'm trying to get it to work just to see how the clientListener works in action. I can't get it to work though.

  • Mail search doesn't work at all / disabled?

    I had some spotlight issues and the index was successfully rebuilt.  Mail however, still has a disabled search functionality.  If I enter a term in the upper right search field no results appear.  Rebooting and restoring Mail don't help.  Mail is not

  • 11.3 upgrade and printer policy deleting default setting

    Noticed something strange since since the upgrade to 11.3 on as far as I can tell all of our Win7x64 machines. I have our printer policies assigned to the machines using Network (SMB / HTTP) printers. No printer is set to default in any of the police

  • How to convert object type to only Date type ?

    Hii everyone, I have a table in database and their is column called as date and its data type is DateTime In my UI part i have taken a Datepeacker and what ever user selected that date i am storing in my Date properties which has the same data type D

  • In gmail the spell checker underlines the ends of words that are spelled correctly. Annoying at best.

    running firefox 16.0.1 on pc with windows 7. This seems to have started with new version upgrade. In gmail the spell checker highlights last parts of words that are spelled correctly.