MI: Initialize the Client Passwort
Hello MI-Experts,
is there any possibility to initialize the MI-Client Logon Passwort?
I know how to reinitialize the whole client from Joe's excellent Weblog.
But is their any possibily to reset only the client password,when the user has forgotten it?
Regards
Frank Brackmann
Hi Frank,
In order to allow the user to reset his password follow this procedure:
1. Open the file MobileEngine.config in the directory <SAP MI installation directory>\settings in an editor.
2. Add the following parameters:
MobileEngine.Security.ResetLocalLogonPasswordSupport=true.
3. Save your entries.
Result
The user logon screen contains the pushbutton Reset Password. If the user has forgotten his or her logon password, he or she can log on to the server using the synchronization password and enter a new logon password without having to specify the old one.
If this does not work for you, the client must be completely reinstalled.
Regards,
Rahul
If this helps, don't forget to assign me points.
Similar Messages
-
Each time I restart this exchange server, the Information Store and System Attendant don't start. If It try to manually start the services, I get the follow errors:
Event ID 5003:
Unable to initialize the Microsoft Exchange Information Store service because the clocks on the client and on the server machine are skewed. This may be caused by a time change either in the client or the server machine, and may require a reboot of that machine. Other than that, verify that your domain is properly configured and is currently online.
Event ID 1005:
Unexpected error The clocks on the client and server machines are skewed. ID no: 80090324 Microsoft Exchange System Attendant occurred.
The clocks on the domain controllers and the exchange server are set to the same time zones. As well, all three clocks are in sync down to the second. Any ideas on what's causing this and how to fix it?Run this Command from the Exchange Server
Net time \\ADServerName /Set
and confirm the action,
and then you need to restart the service
Microsoft Exchange Active Directory Topology Service
and confirm you are not getting the Error 4001 in the event Viewer.
Thank you, it resolved my issue after being sweating looking for solution.
How can I prevent this from happening? I cannot restart services on each server reboot nor lose 5 years of my life!!!
Sokratis Laskaridis MCP, MCTS, MCITP, Small Business Specialist Netapp ASAP, Symantec STS -
I have seen this issue out there in a few threads but a definitive solution has not been posted by Microsoft that I can find. So here is the simple answer. The long answer why this doesn't work on a default install of MSNFS is going to have to come from
Microsoft and should be in the form of a hotfix.
Problem Description
On boot, Client for NFS starts and remains running. If an attempt is made to restart the service from the MMC or nfsadmin, an error occurs and nfsclnt fails to start.
Event log error:
==================================================================
Log Name: Application
Source: NfsClnt
Date: 7/7/2011 2:39:51 PM
Event ID: 16387
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: myserver
Description:
Windows(R) failed a request to initialize the Network File System (NFS) redirector
<[d:\w7rtm\base\fs\remotefs\nfs\client\nfsclient\service.c:199] : 0: The operation completed successfully.
>.
Client for NFS cannot start.
Windows may be low on system resources. Try increasing available system resources by closing programs, then start Client for NFS manually.
==================================================================
PROBLEM CAUSED BY: When shutting down Client for NFS using the Services GUI, Client for NFS Redirector is not shut down
SOLUTION: Stop NFS Redirector - 'sc stop NfsRdr' - Then start NFS client service - 'nfsadmin start client'
Use 'nfsadmin client stop' to correctly shut down both the Client for NFS service and the Client for NFS Redirector.
'Network File System (NFS) redirector' is actually "Client for NFS Redirector" and not listed as a service even though "Client for NFS" requires it.
Using 'sc', details on the hidden NfsRdr system component can be queried and then used to stop the redirector so that nfsclnt.exe can reload it on start up using the Services GUI.
C:\Windows\System32>sc GetDisplayName NfsRdr
[SC] GetServiceDisplayName SUCCESS
Name = Client for NFS Redirector
C:\Windows\System32>sc qdescription NfsRdr
[SC] QueryServiceConfig2 SUCCESS
SERVICE_NAME: NfsRdr
DESCRIPTION: Kernel-side part of Client for NFS. Enables a Windows based computer to access NFS server shares
Hope this thread is helpful !!Thank you for your sharing and this will certainly help others have similar issues in future.TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]
-
Couldn't initialize Oracle client library
Hi,gurus:
My IDES4.7 installed windows200 with DB oracle9I,it's ok before. but after i repaired the OS after a vital error, once i started the SAPMMC, first it's yellow, after a wile it's green but later the disp+work.exe turned grey.
the flowing is the log from dev_w2
Please do me a favor,thanks a lot.
trc file: "dev_w2", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Wed Jul 02 20:28:15 2008
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\HFS\SYS\exe\run\dboraslib.dll' ...
B Library 'D:\usr\sap\HFS\SYS\exe\run\dboraslib.dll' loaded
B Version of 'D:\usr\sap\HFS\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.220)
B New connection 0 created
M sysno 00
M sid HFS
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 221
M intno 20020600
M make: multithreaded, ASCII
M pid 2404
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 2 2404) [dpxxdisp.c 1164]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M
M Wed Jul 02 20:28:16 2008
M DpShMCreate: sizeof(wp_adm) 13312 (832)
M DpShMCreate: sizeof(tm_adm) 2379840 (11840)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (364)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06DE0040, size: 2672144)
M DpShMCreate: allocated sys_adm at 06DE0040
M DpShMCreate: allocated wp_adm at 06DE17D8
M DpShMCreate: allocated tm_adm_list at 06DE4BD8
M DpShMCreate: allocated tm_adm at 06DE4C00
M DpShMCreate: allocated wp_ca_adm at 07029C40
M DpShMCreate: allocated appc_ca_adm at 0702E290
M DpShMCreate: allocated comm_adm_list at 0702FA00
M DpShMCreate: allocated comm_adm at 0702FA18
M DpShMCreate: allocated vmc_adm_list at 0705E818
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0705E840
M DpShMCreate: allocated wall_adm at 0705E848
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 2 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Jul 02 20:28:17 2008
M calling db_connect ...
C Prepending D:\oracle\ora92 to Path.
C got NLS_LANG='AMERICAN_AMERICA.WE8DEC' from environment
C *** ERROR => Couldn't initialize Oracle client library,
please check your installation!
[dbsloci.c 2015]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1282]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9696]
M
M Info for wp 2
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server shining_HFS_00 on host shining (wp 2)
M * ERROR tskh_init: db_connect
M *
M * TIME Wed Jul 02 20:28:17 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9881
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 255]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 2 2404) [dpnttool.c 357]Hello Wang,
> C *** ERROR => Couldn't initialize Oracle client library,
Have you also restored / re-installed the oracle client libs on your windows system? It seems like the oracle client libs are missing.
Regards
Stefan -
[Closed]Bumblebee - Failed to initialize the NVIDIA GPU
Hi,
I'am having trouble with bumblebee. When i ran
optirun glxgears -info
I get the following error,
[ 66.574]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 66.574] X Protocol Version 11, Revision 0
[ 66.574] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 66.574] Current Operating System: Linux archlinux 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64
[ 66.574] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=2136b55a-3c0b-4a13-a536-86d195e15fa8 ro
[ 66.574] Build Date: 01 July 2013 10:48:42AM
[ 66.574]
[ 66.574] Current version of pixman: 0.30.0
[ 66.574] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 66.574] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 66.574] (==) Log file: "/var/log/Xorg.8.log", Time: Tue Jul 30 19:25:29 2013
[ 66.589] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 66.589] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 66.607] (==) ServerLayout "Layout0"
[ 66.607] (==) No screen section available. Using defaults.
[ 66.607] (**) |-->Screen "Default Screen Section" (0)
[ 66.607] (**) | |-->Monitor "<default monitor>"
[ 66.607] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 66.607] (**) | |-->Device "DiscreteNvidia"
[ 66.607] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 66.607] (**) Option "AutoAddDevices" "false"
[ 66.607] (**) Option "AutoAddGPU" "false"
[ 66.607] (**) Not automatically adding devices
[ 66.607] (==) Automatically enabling devices
[ 66.607] (**) Not automatically adding GPU devices
[ 66.607] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 66.607] Entry deleted from font path.
[ 66.607] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 66.607] Entry deleted from font path.
[ 66.607] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 66.607] Entry deleted from font path.
[ 66.607] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 66.607] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 66.607] Entry deleted from font path.
[ 66.607] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 66.607] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 66.607] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 66.607] (==) |-->Input Device "<default pointer>"
[ 66.607] (==) |-->Input Device "<default keyboard>"
[ 66.607] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 66.607] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 66.607] (II) Loader magic: 0x7fdc20
[ 66.607] (II) Module ABI versions:
[ 66.607] X.Org ANSI C Emulation: 0.4
[ 66.607] X.Org Video Driver: 14.1
[ 66.607] X.Org XInput driver : 19.1
[ 66.607] X.Org Server Extension : 7.0
[ 66.607] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 66.608] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 66.608] setversion 1.4 failed
[ 66.609] (--) PCI:*(0:1:0:0) 10de:0fd4:1462:10d7 rev 161, Mem @ 0xf5000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 66.609] Initializing built-in extension Generic Event Extension
[ 66.609] Initializing built-in extension SHAPE
[ 66.609] Initializing built-in extension MIT-SHM
[ 66.609] Initializing built-in extension XInputExtension
[ 66.609] Initializing built-in extension XTEST
[ 66.609] Initializing built-in extension BIG-REQUESTS
[ 66.609] Initializing built-in extension SYNC
[ 66.609] Initializing built-in extension XKEYBOARD
[ 66.609] Initializing built-in extension XC-MISC
[ 66.609] Initializing built-in extension SECURITY
[ 66.609] Initializing built-in extension XINERAMA
[ 66.609] Initializing built-in extension XFIXES
[ 66.609] Initializing built-in extension RENDER
[ 66.609] Initializing built-in extension RANDR
[ 66.609] Initializing built-in extension COMPOSITE
[ 66.609] Initializing built-in extension DAMAGE
[ 66.609] Initializing built-in extension MIT-SCREEN-SAVER
[ 66.609] Initializing built-in extension DOUBLE-BUFFER
[ 66.609] Initializing built-in extension RECORD
[ 66.609] Initializing built-in extension DPMS
[ 66.609] Initializing built-in extension X-Resource
[ 66.609] Initializing built-in extension XVideo
[ 66.609] Initializing built-in extension XVideo-MotionCompensation
[ 66.609] Initializing built-in extension XFree86-VidModeExtension
[ 66.609] Initializing built-in extension XFree86-DGA
[ 66.609] Initializing built-in extension XFree86-DRI
[ 66.609] Initializing built-in extension DRI2
[ 66.609] (II) LoadModule: "glx"
[ 66.622] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 67.248] (II) Module glx: vendor="NVIDIA Corporation"
[ 67.248] compiled for 4.0.2, module version = 1.0.0
[ 67.248] Module class: X.Org Server Extension
[ 67.248] (II) NVIDIA GLX Module 319.32 Wed Jun 19 14:55:38 PDT 2013
[ 67.257] Loading extension GLX
[ 67.257] (II) LoadModule: "nvidia"
[ 67.258] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 67.346] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 67.346] compiled for 4.0.2, module version = 1.0.0
[ 67.346] Module class: X.Org Video Driver
[ 67.354] (II) LoadModule: "mouse"
[ 67.354] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 67.357] (II) Module mouse: vendor="X.Org Foundation"
[ 67.357] compiled for 1.14.0, module version = 1.9.0
[ 67.357] Module class: X.Org XInput Driver
[ 67.357] ABI class: X.Org XInput driver, version 19.1
[ 67.357] (II) LoadModule: "kbd"
[ 67.358] (WW) Warning, couldn't open module kbd
[ 67.358] (II) UnloadModule: "kbd"
[ 67.358] (II) Unloading kbd
[ 67.358] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 67.358] (II) NVIDIA dlloader X Driver 319.32 Wed Jun 19 14:34:12 PDT 2013
[ 67.358] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 67.359] (--) using VT number 7
[ 67.367] (II) Loading sub module "fb"
[ 67.367] (II) LoadModule: "fb"
[ 67.367] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 67.367] (II) Module fb: vendor="X.Org Foundation"
[ 67.368] compiled for 1.14.2, module version = 1.0.0
[ 67.368] ABI class: X.Org ANSI C Emulation, version 0.4
[ 67.368] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 67.368] (II) Loading sub module "wfb"
[ 67.368] (II) LoadModule: "wfb"
[ 67.368] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 67.376] (II) Module wfb: vendor="X.Org Foundation"
[ 67.376] compiled for 1.14.2, module version = 1.0.0
[ 67.377] ABI class: X.Org ANSI C Emulation, version 0.4
[ 67.377] (II) Loading sub module "shadow"
[ 67.377] (II) LoadModule: "shadow"
[ 67.377] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 67.377] (II) Module shadow: vendor="X.Org Foundation"
[ 67.377] compiled for 1.14.2, module version = 1.1.0
[ 67.377] ABI class: X.Org ANSI C Emulation, version 0.4
[ 67.377] (II) Loading sub module "ramdac"
[ 67.377] (II) LoadModule: "ramdac"
[ 67.377] (II) Module "ramdac" already built-in
[ 67.378] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 67.378] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 67.378] (==) NVIDIA(0): RGB weight 888
[ 67.378] (==) NVIDIA(0): Default visual is TrueColor
[ 67.378] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 67.378] (**) NVIDIA(0): Option "NoLogo" "true"
[ 67.378] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 67.379] (**) NVIDIA(0): Option "UseEDID" "false"
[ 67.379] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 67.379] (**) NVIDIA(0): Enabling 2D acceleration
[ 67.379] (**) NVIDIA(0): Ignoring EDIDs
[ 67.379] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 67.379] (**) NVIDIA(0): mode
[ 72.511] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 72.511] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 72.511] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 72.511] (EE) NVIDIA(0): README for additional information.
[ 72.511] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 72.511] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 72.512] (II) UnloadModule: "nvidia"
[ 72.512] (II) UnloadSubModule: "shadow"
[ 72.512] (II) UnloadSubModule: "wfb"
[ 72.512] (II) UnloadSubModule: "fb"
[ 72.512] (EE) Screen(s) found, but none have a usable configuration.
[ 72.512] (EE)
Fatal server error:
[ 72.512] (EE) no screens found(EE)
[ 72.512] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 72.512] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 72.512] (EE)
[ 72.512] (EE) Server terminated with error (1). Closing log file.
This is /etc/bumblebee/bumblebee.conf file;
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia:/usr/lib32/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
In addition
dmesg | grep nvidia
does not return anything and
modprobe nvidia
returns
modprobe: ERROR: could not insert 'nvidia': No such device
There is no /etc/X11/xorg.conf file.
Last edited by Selo (2013-07-30 19:41:25)Hello, I also I have that problem.
$primusrun glxgears
primus: fatal: Bumblebee daemon reported: error: [XORG] (EE) Failed to load module "mouse" (module does not exist, 0)
$grep -Fn '(EE' /var/log/Xorg.8.log
15: (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
105:[ 875.659] (EE) Failed to load module "mouse" (module does not exist, 0)
110:[ 875.659] (EE) Failed to load module "kbd" (module does not exist, 0)
153:[ 880.312] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
154:[ 880.312] (EE) NVIDIA(0): check your system's kernel log for additional error
155:[ 880.312] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
156:[ 880.312] (EE) NVIDIA(0): README for additional information.
157:[ 880.312] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
158:[ 880.312] (EE) NVIDIA(0): Failing initialization of X screen 0
163:[ 880.312] (EE) Screen(s) found, but none have a usable configuration.
164:[ 880.312] (EE)
166:[ 880.312] (EE) no screens found(EE)
167:[ 880.312] (EE)
171:[ 880.312] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
172:[ 880.313] (EE)
173:[ 880.313] (EE) Server terminated with error (1). Closing log file. -
Failed to Initialize the application 'soa-infra'
Hi,
During installation of SOA 11g, i am facing problem in starting the managed server.
Iam using the following components with versions:
*1. JDeveloper Studio Edition Version 11.1.1.2.0 (Base install)*
*2. Weblogic Server 10.3.2.0*
*3. SOA Suite 11.1.1.2.0*
Configured the weblogic sever and initialized successful. I can able to login with weblogic admin console http://localhost:7001/console
But unable to initialize the managed server.
I entered in the command prompt the following line to start the Managed server:
cd C:\Oracle\Middleware\home_11gR1\user_projects\domains\domain1\bin+
startManagedWebLogic.cmd soa_server1*
please find the error logs below:
<14 Feb, 2010 10:36:22 PM IST> <Error> <Deployer> <BEA-149205> <Failed to initia
lize the application 'soa-infra' due to error weblogic.management.DeploymentExce
ption: [J2EE:160149]Error while processing library references. Unresolved applic
ation library references, defined in weblogic-application.xml: [Extension-Name:
adf.oracle.domain, exact-match: false]..
weblogic.management.DeploymentException: [J2EE:160149]Error while processing lib
rary references. Unresolved application library references, defined in weblogic-
application.xml: [Extension-Name: adf.oracle.domain, exact-match: false].
at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(
CheckLibraryReferenceFlow.java:26)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.ja
va:1221)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineD
river.java:83)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.j
ava:367)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.jav
a:54)
Truncated. see log file for complete stacktrace
>
<14 Feb, 2010 10:36:22 PM IST> <Notice> <Log Management> <BEA-170027> <The Serve
r has established connection with the Domain level Diagnostic Service successful
ly.>
<14 Feb, 2010 10:36:22 PM IST> <Critical> <WebLogicServer> <BEA-000286> <Failed
to invoke startup class "Audit Loader Startup Class", java.lang.ClassNotFoundExc
eption: oracle.security.audit.ajl.loader.JEEAuditLoader
java.lang.ClassNotFoundException: oracle.security.audit.ajl.loader.JEEAuditLoade
r
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
Truncated. see log file for complete stacktrace
>
<14 Feb, 2010 10:36:22 PM IST> <Critical> <WebLogicServer> <BEA-000286> <Failed
to invoke startup class "OWSM Startup class", java.lang.ClassNotFoundException:
oracle.wsm.policymanager.util.PolicyManagerStartup
java.lang.ClassNotFoundException: oracle.wsm.policymanager.util.PolicyManagerSta
rtup
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
Truncated. see log file for complete stacktrace
>
<14 Feb, 2010 10:36:22 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to ADMIN>
<14 Feb, 2010 10:36:22 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to RESUMING>
<14 Feb, 2010 10:36:23 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[
5]" is now listening on fe80:0:0:0:9110:972e:a205:5448:8001 for protocols iiop,
t3, ldap, snmp, http.>
<14 Feb, 2010 10:36:23 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[
7]" is now listening on 0:0:0:0:0:0:0:1:8001 for protocols iiop, t3, ldap, snmp,
http.>
<14 Feb, 2010 10:36:23 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[
1]" is now listening on 2001:0:cf2e:3096:18e0:c66:8a3e:95d4:8001 for protocols i
iop, t3, ldap, snmp, http.>
<14 Feb, 2010 10:36:23 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[
3]" is now listening on fe80:0:0:0:745d:4ced:9c6f:b98:8001 for protocols iiop, t
3, ldap, snmp, http.>
<14 Feb, 2010 10:36:23 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default"
is now listening on 192.168.1.2:8001 for protocols iiop, t3, ldap, snmp, http.>
<14 Feb, 2010 10:36:23 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[
6]" is now listening on fe80:0:0:0:0:5efe:c0a8:102:8001 for protocols iiop, t3,
ldap, snmp, http.>
<14 Feb, 2010 10:36:23 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[
4]" is now listening on fe80:0:0:0:18e0:c66:8a3e:95d4:8001 for protocols iiop, t
3, ldap, snmp, http.>
<14 Feb, 2010 10:36:23 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[
2]" is now listening on fe80:0:0:0:159e:df37:2373:d1e1:8001 for protocols iiop,
t3, ldap, snmp, http.>
<14 Feb, 2010 10:36:23 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[
8]" is now listening on 127.0.0.1:8001 for protocols iiop, t3, ldap, snmp, http.
>
<14 Feb, 2010 10:36:23 PM IST> <Notice> <WebLogicServer> <BEA-000332> <Started W
ebLogic Managed Server "soa_server1" for domain "domain1" running in Development
Mode>
<14 Feb, 2010 10:36:23 PM IST> <Warning> <Server> <BEA-002611> <Hostname "USER-P
C", maps to multiple IP addresses: 192.168.1.2, fe80:0:0:0:159e:df37:2373:d1e1%1
0, fe80:0:0:0:18e0:c66:8a3e:95d4%12, 2001:0:cf2e:3096:18e0:c66:8a3e:95d4>
<14 Feb, 2010 10:36:27 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to RUNNING>
<14 Feb, 2010 10:36:27 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server st
arted in RUNNING mode>
when i entered the address in the url : http://localhost:7001/em getting the below message in the browser
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.4.5 404 Not Found*
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Can any one help me to resolve this problem...
Thanx in advance
Regards,
Aejaz
Edited by: Aejaz on Feb 14, 2010 10:13 AMI had already configured the EM manager and other things while creating domain. I selected the option as follows;
1. create a new weblogic domain.
2. generate a domain configured automatically to support the following products.
(selected the below items)
oracle soa suite 11.1.1.0
oracle enterprise manager 11.1.1.0
oracle BAM 11.1.1.0
oracle wsm....
oracle JRF...
All the above steps were shown as successfull till the last.
But facing the problem while starting the severs (only weblogic server started successfully).
Iam using versions :
Weblogic Server 10.3.2.0
SOA Suite 11.1.1.2.0 (but the wizard is showing version as 11.1.1.0)
Is this problem is due to version difference?
Thanx
Aejaz -
Failed to initialize the network. Check if another instance of agent is
Out of the blue a small number of my Windows XP PCs get the following error
when logging in. Usually appears while login script page is on screen:-
Failed to initialize the network. Check if another instance of agent is
running. Contact the system administrator
Once XP has loaded ok I can manually start the Remote Management service.
Some PCs are intermittent and don't seem to get it again but a couple get it
every login. I removed the client and reinstalled. I removed the Remote
Management service and re-installed. Re-registered the PC Workstation but no
change for those who get it every day.
I did find this:-
Failed to initialize the network. Check if another instance of agent is
running. Contact the system administrator
Source: Remote Management Agent
Severity: Critical
Possible Cause: The Remote Management Agent is unable to bind to the IPX or
IP port that is being used for Remote Management service, or the ports are
being used by some other application running on the managed workstation.
Action: Uninstall any third-party remote control agent or remote control
application using these ports from the managed workstation.
Possible Cause: The protocol stack is corrupted.
Action: Reinstall the protocol stack.
Possible Cause: The managed workstation is not connected to the network, or
the network is down.
Action: Connect the managed workstation to the network.
I don't have any third party remote control agent installed and I've tried
the refresh of the IP protocol stack. Surprised this has started as we have
not made any changes to the network or software. We run NW Client 4.83sp1
and NW5.1 sp5.
Anybody else had this and cleared it completely?Further developments:
It looks like it's a fault in the nic. it's a Compaq NC3120 Fast Ethernet
card. It used to work, but since I've wiped out the card drivers that were
in use, I'm at HP's mercy. They are telling me that the card is no longer
under warranty and won't even tell me what driver to look for. Anything I've
managed to find has the exact same symptoms:
Client works, ping to IP addresses work, ping to www.yahoo.com (etc) doesn't
work, although winipcfg shows a DNS server the same as every other machine I
have.
Internet explorer doesn't work, even with IP addresses to local servers.
And of course, zenrc32 doesn't work, wsreg32 doesn't work.
Does anyone know of a way of making the NC3120 work on a win98 machine?
Shall I just go buy a couple dozen netcards from a more reputable company
than compaq?
Chris Denby
IT Coordinator
Rainy River District School Board
Fort Frances, Ontario
Canada
"Chris Denby" <[email protected]> wrote in message
news:[email protected]...
> I have this message on windows 98. In addition to that, the wsreg32.log
> reads work station import error -1 (UNKNOWN).
> This happened after ghosting down to the machine and finding that it had a
> different card. The client adapted easily to a new card, but the
zenrc32.exe
> won't run.
>
> I've checked to make sure it wasn't running by renaming the zenrc32.exe to
> zenrc32.ex so it wouldn't run on start up. Then after the machine was
> started up, I changed it back and ran it and it died immediately with the
> same error.
>
> I have uninstalled the client through admin\unc32 and removed all traces
of
> the client then reinstalling, but no luck.
>
>
> <[email protected]> wrote in message
> news:1XuQc.3739$8%[email protected]...
> > Did you ever get this solved?
> > I've got the same thing going on with one Win2000 machine in my
> > department. He can log into the network just fine but can not get to the
> > internet.
> > I've tried re-installing the protocol stack; no luck. I've searched hi
and
> > low for any other agent running on the machine with no luck. I've
searched
> > the registry for hours for all keys that would start programs or agents
at
> > start. Can't find anything. I've check for services, checked for fire
wall
> > problems, viruses. No luck. Since its only one machine I can re-image it
> > with no problem, but I'm curious and want to find out whats going on in
> > case the problem reapears or grows to other machines.
> > Any help out there???
> >
> > > Out of the blue a small number of my Windows XP PCs get the following
> > error
> > > when logging in. Usually appears while login script page is on
screen:-
> > >
> > > Failed to initialize the network. Check if another instance of agent
is
> > > running. Contact the system administrator
> > >
> > > Once XP has loaded ok I can manually start the Remote Management
> service.
> > > Some PCs are intermittent and don't seem to get it again but a couple
> > get it
> > > every login. I removed the client and reinstalled. I removed the
Remote
> > > Management service and re-installed. Re-registered the PC Workstation
> > but no
> > > change for those who get it every day.
> > >
> > > I did find this:-
> > >
> > > Failed to initialize the network. Check if another instance of agent
is
> > > running. Contact the system administrator
> > >
> > > Source: Remote Management Agent
> > >
> > > Severity: Critical
> > >
> > > Possible Cause: The Remote Management Agent is unable to bind to the
IPX
> > or
> > > IP port that is being used for Remote Management service, or the ports
> > are
> > > being used by some other application running on the managed
workstation.
> > >
> > > Action: Uninstall any third-party remote control agent or remote
control
> > > application using these ports from the managed workstation.
> > >
> > > Possible Cause: The protocol stack is corrupted.
> > >
> > > Action: Reinstall the protocol stack.
> > >
> > > Possible Cause: The managed workstation is not connected to the
network,
> > or
> > > the network is down.
> > >
> > > Action: Connect the managed workstation to the network.
> > >
> > > I don't have any third party remote control agent installed and I've
> > tried
> > > the refresh of the IP protocol stack. Surprised this has started as we
> > have
> > > not made any changes to the network or software. We run NW Client
> 4.83sp1
> > > and NW5.1 sp5.
> > >
> > > Anybody else had this and cleared it completely?
> > >
> > >
> > >
> > >
> > >
> >
>
> -
HOW TO FIND THE PATH TRAVELLED BY THE CLIENT'S REQUEST PACKET
Hi,
I want to know is there any way by which we can know the entire path or the hops travelled by the client request packet to reach the web-server.Say suppose the client machine is part of a large network in a corparate where there is a a personlaized WAN. I want to know whther i can achive this using the servlets.
and i even want to know some information about the client's NIC Card Physical Address.If at all i use the HttpServletRequest.inetAddress() gives the public IP of the Client which is shared in the network.
Please suggest me a way by which i can do this.
Thanks in Advance!!!
Regards,
RAHULhey i m back
import java.net.Inet4Address;
import java.net.InetAddress;
import java.net.URL;
import java.util.Arrays;
import jpcap.JpcapCaptor;
import jpcap.JpcapSender;
import jpcap.NetworkInterface;
import jpcap.NetworkInterfaceAddress;
import jpcap.packet.EthernetPacket;
import jpcap.packet.ICMPPacket;
import jpcap.packet.IPPacket;
import jpcap.packet.Packet;
public class Traceroute {
public static void main(String[] args) throws Exception{
if(args.length<2){
System.out.println("Usage: java Traceroute <device index (e.g., 0, 1..)> <target host address>");
System.exit(0);
//initialize Jpcap
NetworkInterface device=JpcapCaptor.getDeviceList()[Integer.parseInt(args[0])];
JpcapCaptor captor=JpcapCaptor.openDevice(device,2000,false,5000);
InetAddress thisIP=null;
for(NetworkInterfaceAddress addr:device.addresses)
if(addr.address instanceof Inet4Address){
thisIP=addr.address;
break;
//obtain MAC address of the default gateway
InetAddress pingAddr=InetAddress.getByName("www.microsoft.com");
captor.setFilter("tcp and dst host "+pingAddr.getHostAddress(),true);
byte[] gwmac=null;
while(true){
new URL("http://www.microsoft.com").openStream().close();
Packet ping=captor.getPacket();
if(ping==null){
System.out.println("cannot obtain MAC address of default gateway.");
System.exit(-1);
}else if(Arrays.equals(((EthernetPacket)ping.datalink).dst_mac,device.mac_address))
continue;
gwmac=((EthernetPacket)ping.datalink).dst_mac;
break;
//create ICMP packet
ICMPPacket icmp=new ICMPPacket();
icmp.type=ICMPPacket.ICMP_ECHO;
icmp.seq=100;
icmp.id=0;
icmp.setIPv4Parameter(0,false,false,false,0,false,false,false,0,0,0,IPPacket.IPPROTO_ICMP,
thisIP,InetAddress.getByName(args[1]));
icmp.data="data".getBytes();
EthernetPacket ether=new EthernetPacket();
ether.frametype=EthernetPacket.ETHERTYPE_IP;
ether.src_mac=device.mac_address;
ether.dst_mac=gwmac;
icmp.datalink=ether;
captor.setFilter("icmp and dst host "+thisIP.getHostAddress(),true);
JpcapSender sender=captor.getJpcapSenderInstance();
//JpcapSender sender=JpcapSender.openDevice(device);
sender.sendPacket(icmp);
while(true){
ICMPPacket p=(ICMPPacket) captor.getPacket();
//System.out.println("received "+p);
if(p==null){
System.out.println("Timeout");
}else if(p.type==ICMPPacket.ICMP_TIMXCEED){
p.src_ip.getHostName();
System.out.println(icmp.hop_limit+": "+p.src_ip);
icmp.hop_limit++;
}else if(p.type==ICMPPacket.ICMP_UNREACH){
p.src_ip.getHostName();
System.out.println(icmp.hop_limit+": "+p.src_ip);
System.exit(0);
}else if(p.type==ICMPPacket.ICMP_ECHOREPLY){
p.src_ip.getHostName();
System.out.println(icmp.hop_limit+": "+p.src_ip);
System.exit(0);
}else continue;
sender.sendPacket(icmp);
} -
[Bumblebee]Failed to initialize the NVIDIA GPU at PCI:1:0:0.
Hi!
I've instaled Arch about a month ago and now wanted to check my nvidia card using Bumblebee, but have some errors…
[wicu@arch:~]$ optirun -vv minecraft
[ 4859.259278] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 4859.404191] [DEBUG]optirun version 3.0.1 starting...
[ 4859.404220] [DEBUG]Active configuration:
[ 4859.404226] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 4859.404242] [DEBUG] X display: :8
[ 4859.404254] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
[ 4859.404265] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 4859.404276] [DEBUG] VGL Compression: proxy
[ 4859.536971] [INFO]Response: No - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 4859.537027] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 4859.537053] [DEBUG]Socket closed.
[ 4859.537086] [ERROR]Aborting because fallback start is disabled.
[ 4859.537094] [DEBUG]Killing all remaining processes.
[wicu@arch:~]$ sudo journalctl // here is only part when I tried use bumblebee
Nov 26 17:48:43 arch kernel: NVRM: failed to copy vbios to system memory.
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238670] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238729] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238765] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238819] [ERROR][XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238826] [ERROR][XORG] (EE) NVIDIA(0): check your system's kernel log for additional error
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238830] [ERROR][XORG] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238835] [ERROR][XORG] (EE) NVIDIA(0): README for additional information.
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238841] [ERROR][XORG] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238847] [ERROR][XORG] (EE) NVIDIA(0): Failing initialization of X screen 0
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238853] [ERROR][XORG] (EE) Screen(s) found, but none have a usable configuration.
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238858] [ERROR][XORG] (EE)
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238863] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238868] [ERROR][XORG] (EE)
Nov 26 17:48:43 arch bumblebeed[303]: [ 4139.238873] [ERROR]X did not start properly
Nov 26 17:48:43 arch kernel: NVRM: RmInitAdapter failed! (0x30:0xffffffff:739)
Nov 26 17:48:43 arch kernel: NVRM: rm_init_adapter(0) failed
// xorg log
[ 4859.510]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 4859.511] X Protocol Version 11, Revision 0
[ 4859.511] Build Operating System: Linux 3.6.3-1-ARCH x86_64
[ 4859.511] Current Operating System: Linux arch 3.6.7-1-ARCH #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012 x86_64
[ 4859.511] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=70a6cff9-bcf7-42eb-9ba1-73953e023617 ro quiet
[ 4859.511] Build Date: 08 November 2012 07:09:29PM
[ 4859.511]
[ 4859.511] Current version of pixman: 0.28.0
[ 4859.511] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4859.511] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4859.511] (==) Log file: "/var/log/Xorg.8.log", Time: Mon Nov 26 18:00:43 2012
[ 4859.511] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 4859.511] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4859.511] (==) ServerLayout "Layout0"
[ 4859.512] (==) No screen section available. Using defaults.
[ 4859.512] (**) |-->Screen "Default Screen Section" (0)
[ 4859.512] (**) | |-->Monitor "<default monitor>"
[ 4859.512] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 4859.512] (**) | |-->Device "Device1"
[ 4859.512] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4859.512] (**) Option "AutoAddDevices" "false"
[ 4859.512] (**) Not automatically adding devices
[ 4859.512] (==) Automatically enabling devices
[ 4859.512] (==) Automatically adding GPU devices
[ 4859.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4859.512] Entry deleted from font path.
[ 4859.512] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4859.512] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4859.512] Entry deleted from font path.
[ 4859.512] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4859.512] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 4859.512] (++) ModulePath set to "/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules"
[ 4859.512] (==) |-->Input Device "<default pointer>"
[ 4859.512] (==) |-->Input Device "<default keyboard>"
[ 4859.512] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 4859.512] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 4859.512] (II) Loader magic: 0x7fcc40
[ 4859.512] (II) Module ABI versions:
[ 4859.512] X.Org ANSI C Emulation: 0.4
[ 4859.513] X.Org Video Driver: 13.1
[ 4859.513] X.Org XInput driver : 18.0
[ 4859.513] X.Org Server Extension : 7.0
[ 4859.513] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4859.513] setversion 1.4 failed
[ 4859.516] (--) PCI:*(0:1:0:0) 10de:0de9:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 4859.516] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4859.516] Initializing built-in extension Generic Event Extension
[ 4859.516] Initializing built-in extension SHAPE
[ 4859.516] Initializing built-in extension MIT-SHM
[ 4859.516] Initializing built-in extension XInputExtension
[ 4859.516] Initializing built-in extension XTEST
[ 4859.516] Initializing built-in extension BIG-REQUESTS
[ 4859.516] Initializing built-in extension SYNC
[ 4859.516] Initializing built-in extension XKEYBOARD
[ 4859.516] Initializing built-in extension XC-MISC
[ 4859.516] Initializing built-in extension SECURITY
[ 4859.516] Initializing built-in extension XINERAMA
[ 4859.516] Initializing built-in extension XFIXES
[ 4859.516] Initializing built-in extension RENDER
[ 4859.516] Initializing built-in extension RANDR
[ 4859.516] Initializing built-in extension COMPOSITE
[ 4859.516] Initializing built-in extension DAMAGE
[ 4859.516] Initializing built-in extension MIT-SCREEN-SAVER
[ 4859.516] Initializing built-in extension DOUBLE-BUFFER
[ 4859.516] Initializing built-in extension RECORD
[ 4859.516] Initializing built-in extension DPMS
[ 4859.516] Initializing built-in extension X-Resource
[ 4859.516] Initializing built-in extension XVideo
[ 4859.516] Initializing built-in extension XVideo-MotionCompensation
[ 4859.516] Initializing built-in extension XFree86-VidModeExtension
[ 4859.516] Initializing built-in extension XFree86-DGA
[ 4859.516] Initializing built-in extension XFree86-DRI
[ 4859.516] Initializing built-in extension DRI2
[ 4859.516] (II) LoadModule: "glx"
[ 4859.516] (II) Loading /usr/lib/nvidia-bumblebee/xorg/modules/extensions/libglx.so
[ 4859.526] (II) Module glx: vendor="NVIDIA Corporation"
[ 4859.526] compiled for 4.0.2, module version = 1.0.0
[ 4859.526] Module class: X.Org Server Extension
[ 4859.526] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012
[ 4859.526] Loading extension GLX
[ 4859.526] (II) LoadModule: "nvidia"
[ 4859.526] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 4859.526] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 4859.526] compiled for 4.0.2, module version = 1.0.0
[ 4859.526] Module class: X.Org Video Driver
[ 4859.526] (II) LoadModule: "mouse"
[ 4859.527] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 4859.527] (II) Module mouse: vendor="X.Org Foundation"
[ 4859.527] compiled for 1.13.0, module version = 1.8.1
[ 4859.527] Module class: X.Org XInput Driver
[ 4859.527] ABI class: X.Org XInput driver, version 18.0
[ 4859.527] (II) LoadModule: "kbd"
[ 4859.527] (WW) Warning, couldn't open module kbd
[ 4859.527] (II) UnloadModule: "kbd"
[ 4859.527] (II) Unloading kbd
[ 4859.527] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 4859.527] (II) NVIDIA dlloader X Driver 310.19 Thu Nov 8 00:53:33 PST 2012
[ 4859.527] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 4859.527] (--) using VT number 7
[ 4859.527] (II) Loading sub module "wfb"
[ 4859.527] (II) LoadModule: "wfb"
[ 4859.527] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 4859.527] (II) Module wfb: vendor="X.Org Foundation"
[ 4859.527] compiled for 1.13.0, module version = 1.0.0
[ 4859.527] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4859.527] (II) Loading sub module "ramdac"
[ 4859.527] (II) LoadModule: "ramdac"
[ 4859.527] (II) Module "ramdac" already built-in
[ 4859.527] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4859.527] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 4859.527] (==) NVIDIA(0): RGB weight 888
[ 4859.527] (==) NVIDIA(0): Default visual is TrueColor
[ 4859.527] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 4859.527] (**) NVIDIA(0): Option "NoLogo" "true"
[ 4859.528] (**) NVIDIA(0): Option "UseEDID" "false"
[ 4859.528] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
[ 4859.528] (**) NVIDIA(0): Enabling 2D acceleration
[ 4859.528] (**) NVIDIA(0): ConnectedMonitor string: "DFP"
[ 4859.528] (**) NVIDIA(0): Ignoring EDIDs
[ 4859.534] (EE) NVIDIA(0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 4859.534] (EE) NVIDIA(0): check your system's kernel log for additional error
[ 4859.534] (EE) NVIDIA(0): messages and refer to Chapter 8: Common Problems in the
[ 4859.534] (EE) NVIDIA(0): README for additional information.
[ 4859.534] (EE) NVIDIA(0): Failed to initialize the NVIDIA graphics device!
[ 4859.534] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 4859.534] (II) UnloadModule: "nvidia"
[ 4859.534] (II) UnloadSubModule: "wfb"
[ 4859.534] (EE) Screen(s) found, but none have a usable configuration.
[ 4859.534]
Fatal server error:
[ 4859.534] no screens found
[ 4859.534] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 4859.534] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 4859.534] (EE)
[ 4859.534] Server terminated with error (1). Closing log file.
[wicu@arch:~]$ lspci | grep VGA
3:00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
14:01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
[wicu@arch:~]$ primusrun minecraft
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
asdf
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
27 achievements
208 recipes
Setting user: Druedain, -4246576297828159265
primus: fatal: failure contacting bumblebee daemon
[18:05:39 - wicu@arch:~]$ primusrun minecraft
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
asdf
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
27 achievements
208 recipes
Setting user: Druedain, -7896572405277476304
primus: fatal: failure contacting bumblebee daemon
[wicu@arch:~]$ systemctl | grep bumblebee
35:bumblebeed.service[wicu@arch:~]$ dmesg | grep nvidia
782:[ 6.776816] nvidia: module license 'NVIDIA' taints kernel.
784:[ 6.784411] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[wicu@arch:~]$ cat /etc/bumblebee/bumblebee.conf
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=
## Client options. Will take effect on the next optirun executed.
[optirun]
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia
Module=nvidia
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/nvidia-bumblebee:/usr/lib32/nvidia-bumblebee
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia-bumblebee/xorg/,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
[wicu@arch:~]$ cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "ConnectedMonitor" "DFP"
EndSection -
I have Lotus Notes 8.5 installed on Windows 7 computer.
Firefox 4.0.1 works fine.
But when I change FF as default browser and launch a hyperlink from My mail client I get an error "Could not initialize the application's security component. The most likely cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the browser and fix the problem. If you continue to use this browser session, you might see incorrect browser behavior when accessing security features."
After this error I can open tabs but no website will work.
But if I close Firefox and reopen it will work.
When Firefox is running, if I click the hyberlink from my mail client, it launches without error message and works fine.
Gave Write access to profile folder. replaced cert8.db etc, but it is not helpful.
I installed Firefox 4 - same.
Installed Firefox 5 beta - same.
Installed Firefox 3.6.17 - error message is there but Firefox keeps working after launch.In Mac OS X v10.7, the $HOME/Library folder is a hidden folder.
Open Finder and use one of these:
* Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
* Open the "Go" menu and hold down the Option key to make the Library appear
You can also use this command in a Terminal window to remove the hidden flag.
* Mac HD > Applications > Utilities > Terminal
* chflags nohidden ~/Library -
How to invoke the Client Sequence Clearup process in the SequencialModel?
Hi,
I want to know how to directly call the Client Sequence Clearup in the SequencialModel?
I don't wait to modify the main squence files, because many of the clearups in sequence files are different. I want realize it by modifying SequencialModel file.
there are the problem I suffered:
I have added the some process in clearup like close port, close com, but when I terminate the program, clearup not be executed, I need to modify the SequentialMode to realize that it will jump to the Client main sequence to execute the clearup first when I terminate the process, then execute the other clear process in the sequencialmodel process.
please help,
thanks,
IvanHi,
I also faced the same problem in my project. I am not sure whether there are any direct methods, but i achieved it through a round about method.
1. Create a Boolean station global
2. Set it to True when you exit the client sequence – as a Last Step in the client sequence clean up tab
3. Modify the process model to continue the clean up only after the Boolean value is True - may be this should be the first step in the process model's clean up tab
4. Don’t forget to initialize the Boolean (Set to false) when starting the test
Hope it helps
Thanks,
Sasi -
Good Morning
Im Michele. I have a problem with livecache.
I have installed SAP SCM 4.0 server.
I have installed SAPliveCacheServer for SAP SCM Server 4.0.
I have problem with initialization livecache istance.
I have executed the following instructions:
Setting up Connection to the liveCache Instance
Before checking the connection, you must initialize the liveCache instance using transaction
LC10.
1. Start the SAP SCM instances:
2. Log on to the SAP SCM System as user DDIC (production client).
3. Apply SAP Note 305634 RFC destination for global working on the liveCache
4. To maintain the liveCache connection in table DBCON, call transaction LC10.
The liveCache: Initial Screen appears.
5. In the Name of database connection field, enter LCA and then choose Integration.
6. Name the physical liveCache <LC_NAME>, the liveCache server <LC_HOST>, user data
and the corresponding passwords and make sure that Central Authentication is enabled.
8. Enter the administration report /SAPAPO/DELETE_LC_ANCHORS in field Follow-up
Procedures of section Initialize liveCache.
9. Save your entries.
10. To initialize the liveCache instance LCA:
a. Choose Back (F3). The liveCache: Initial Screen re-appears.
b. Enter LCA in the Name of database connection field.
c. Choose liveCache: Monitoring.
When I execute monitoring appear following message:
Name and Server LCA bw
DBMRFC Function: DBM_EXECUTE
Command: dbm_version
Error: DBM: Error
Return Code: -2
Error message: ERR_USRFAIL: user authorization failed
Please inform me how can I solve this problem
Thank you for your collaboration.
Best regards
Michele medagliaHello Michele,
we handle liveCache issues really only over OSS/CSS messages, so I will have to ask you to open such a message (for queue BC-DB-LVC).
From your problem description, you seem to have a problem with the user authorization. You could try to connect the following:
1. dbmcli -d <SID> -u <dbm-user>,<pwd> db_state
(The dbm-user normally is 'control'.)
2. Test the LCA connection in transaction DB59.
Please put any output of the above in the OSS message.
Kind regards,
Roland -
Hi,
Thanks for reading my post in advance.
I am working on this code to read the time on the client machine which could be locations outside the USA also.
Is there a way I can code so that I can get what the time running on the client machine.
I did some research on the internet and a found a code which gives some ideas about the date format on the client machine.
Is there a way we can modify this code so we can see the time client running on the client's machine.
<%
// get client locale
java.util.Locale locale = request.getLocale();
// get Dateformat for client's locale
java.text.DateFormat dateFormat =
java.text.DateFormat.getDateTimeInstance(
java.text.DateFormat.LONG,
java.text.DateFormat.LONG, locale);
%>
<%=dateFormat.format( new java.util.Date() ) %>You have mentioned in your post that you are trying to find out the time on the Client Machine. It does not clarify if code running on server itself is acting as client or it is the code running on the browser.
If it is the browser then the code that you have posted may not be of any help as Java does not run on the browser(except in applet). You will have to use the Date class of JavaScript. If you make an instance of this class in JavaScript with default constructor it will be initialized by the time of the machine where the browser is running.
If you want to have the time of the server where your jsp code is converted into html, you can use the GregorianCalendar class. The default constructor initialize itself with the date and time of the machine on which the application/web server is running. You can use the methods of this class to retrieve the different parameters of date and time.
HTH. -
Cannot initialize the LockServer component - MAR
Hi,
I have installed the MAR, MAS and Mobile client in 2003 Server. When i try to configure the MAR as like the below link.
http://help.sap.com/saphelp_crm40/helpdata/en/c8/2ae1a3c73245c8aef8c4b69c2ff072/frameset.htm
When i have perform the below link 2 & 3. That means enter the DSN and User name and Pwd like
DSN: ars_db
USD: arsadmin
PWD: <None>
When i choose login. i got the below error message.
"cannot initialize the LockServer component" in MAR.
Thanks in Advance.
Regards,
Bala.cHi Bala,
Refer to SAP Note 459104 which may help with this problem.
Also refer to 498154 in case you are running multiple Short Term Lock Servers on one Development Workstation.
Also There are a number of steps that you can try to resolve this issue.
Can you please check the user rights and roles on the db?
1. Navigate to Control Panel->Administrative Tools->Services.
2. Invoke the process "SAP MAR Central Service"
3. Check that it is running and in #Automatic# mode.
4. Invoke #Microsoft SQL Server#->Enterprise manager#->
Your local machine->Data bases->ars_db->Tables. In the right hand
side choose #ARS_SYSTABLE#.
5. Right click and choose #Return all rows#.
6. In the returned rows check the entry under column heading "Param"
"ServerMachineName" and "RemoteSocketPort" entries.
The "ServerMachineName" entry should
point to the server machine and the "RemoteSocketPort" entry should
point to the port on the server machine where the lock server is
running.
7. Also check if the machine given by the value of "ServerMachineName"
entry is recognised on your network.
In the command prompt type "ping <machine Name>" ( without quotes ).
A ping to the machine name must succeed and must not return
"Unknown host <machineName>".
If this is the case (ping returns "Unknown host") replace the name
of the machine with its IP address.
(Also ensure that this IP address is recognised on your network as
well. Type in the command prompt "ping <IP address>" )
7.1. To replace the machine name, in the returned rows in step (6),
select the value of "ServerMachineName" and directly replace it
with the IP address.
7.2. Tab out from this field for the changes to take effect.
Regards,
Gervase -
Initialize the filepath in FileUpload ?
Hello,
Is it possible to initialize the filepath in the inputfield of the FileUpload UIElement ?
I need to do that to upload the content stored at a fixed place on the client computer.
Note: If someone know how i can read the COM serial port on the client, i will appreciate any help.
ThanksHi Nguyen,
The Web Dynpro FileUpload element gets rendered to HTML as an INPUT element of form:
<input type="file" />
While the
<input>
element does have a value attribute which can be set to an initial value, this value is ignored by all browsers when the input type is of type file. This is for security reasons to prevent "stealing" files from a client computer by a combination of HTML and client-side JavaScript.
For this reason, Web Dynpro has no function for setting a file path for the FileUpload element.
- Walter
Maybe you are looking for
-
CUCMBE3K Experience and Issues Identified
I have created a list below of issues and experiences whilst working with the CUCMBE3K. For the purposes of this dialog, I will refer to this particular customer as “CustomerX”. Part 1: Pre-Sale Engagement Summary Following true to the Cisco PPDIOO m
-
BPEL process with simple sql server select db adapter service fails ORABPEL
I have a simple db adapter service that simply runs a select statement. The process accepts 2 parms and returns a single code of 1 or zero. It fails with ORABPEL-11633 Here is the instance log info: [2008/12/09 14:50:53] "{http://schemas.oracle.com/b
-
EDI Message in Seeburger adapter
Hi All, is there any posibilities to see the signed EDI message (encrypted format) in seeburger module please guide me the procedure by Boopalan
-
Shared photo stream option missing iphoto 11
In Iphoto / preferences there is a missing option to check Shared photo streams. Iphoto 11 - upgrade OSX 10.7.5 Anyone know how to resolve ?
-
Problem with Safari downloading
I can use Safari to browse just fine, but whenever I try to download something it won't start downloading or even bring up the download menu. The status bar starts then after a few seconds just quits and goes back to the original URL. other users on