MICR font check printing

Client wants to use blank check stock sent to a laser printer with magnetic ink to prink their checks.
I assumed if they have a valid MICR font set installed on their workstation, I can just modify one of the Business One check layouts to use the MICR font to print the Check Number, ABA Number and Account Number on the bottom of the check. I know I have to print the numbers in the correct sequence per the MICR Gauge. I figure I will have to concatenate the fields with their start/stop codes into one big formula and then print that at the bottom of the check.
Has anybody else done this? Is there something I'm missing?
TIA.

Hi Cindy Lange,
There is an add-on that has been created for MICR check printing and is available to the SAP Business One market in the US currently (I am not sure about other countries yet). The SAP Business One partner that has developed this add-on for Business One is located in California and the company is Mekorma. You can see details of the product at [www.mekorma.com] as well as is you are an SAP Business One partner you can also get details on the products from Mekorma at [service.sap.com].
Hope this helps,
Regards,
Madhan.

Similar Messages

  • MICR Font for printing payroll checks

    We are in the process of changing banks. The new bank has rejected our sample checks because the spacing is too wide. We are supposed to be using MICR font E-13B.
    How do I find out what font we're using? And, how do I change the font?

    I used the free GnuMICR.ttf from this site: http://sandeen.net/GnuMICR/
    The checks were reviewed by a bank and approved.

  • MICR E-13B font check printing

    i want to print micr line in bottom of check.
    i'm using the font micr e-13b but it is printing as normal letter..any idea.
    Kumar

    Hi Kumar,
            check the font Micr e-13b exist or not (se73).
    Did you selected the font in your paragraph format.Otherwise
    1. Create a paragraph format 'MC' with font 'MICR_E'(for Micr e-13b).
    2. Go to the window where you are display the check number and select the paragraph format
    MC and type C&REGUD-CHECT&C
    You must enter the following letter in SAP script if you are printing
    "transit" - "A".
    "amount" - "B".
    "on-us" - "C".
    "dash" - "D".
    The normal printer won't print the check number.So check the printer.
    Rgds,
    Rama

  • MICR Font problem in spool

    Hi, We are printing checks on MICR printer. In the botom of the check
    we had check number, bank routing number, bank account number, these
    are comming perfectly with MICR font when print online.
    But if i create a spoll by using same printer, and print the spool
    request to the MICR printer, MICR fonts are not effective. I just see
    Check number, bank routing number and account number in regular font.
    Can you please see if i need to go with some oss note or something.
    By the way iam on 4.6C.

    Hi,
    Does your printer have a MICR font DIMM installed? Do you use one of the printers and device types described in SAP note #94233?
    Regards,
    Aidan

  • MICR font problem for check printing in ECC6

    Hi All,
    I am working of the re-deployment project. Here we are just migrating the objects from  4.6c to ECC6. I am facing the problem with SAP Script for check printing. It is working fine in 4.6c,but it is not working fine in ECC.
    We are using  HP 8150 printer with TROY magnetic chip and toner. It is working fine for 4.6C, but not for ECC6.
    We are using "A" character for "Transit" and "C" character for "On as" in SAP Script. But during printing preview time it is not formatting it in MICR font.
    I am working with basis team for font code page 4004. I came to know, it is showing character set in 4.6c with spool administrator tab character set, but this tab page does not showing any character set.
    But according basis team, it is existing in ECC. If we will check through SCP it is showing unicode converted code page.
    In 4.6c we are using Zee printer driver with Zee family fonts(ZMICR and ZSIGN) but in ECC we are using MICR_E(SAP provided MICR font) in TROY provided printer driver.
    I have also come through the SAP note 94233 for MICR printing.
    Same problem we are facing with digital signatures. It is not converting digital signature in graphical signature at MICR printer level.
    Any help would be appreciated...........!
    Thanks
    Sharanjit Singh

    HI,
    Copy the file into Desktop.(font file is available in your local drive: C:\WINDOWS\Fonts
    Copy Arial file into ur desktop or some other location other than windows, and upload it.
    it will work, i did the same.
    Regards
    Aeda

  • Check Printing With MICR font

    Hi
    I am working on check printing.I have downloaded MICR font from IDAutomation.
    In my template i added few labels with MICR font but when i preview it, the font in the pdf is not displaying MICR instead its showing in arial.This is just from the template preview and not in apps preview.I tried to do the font mapping in XML admin and still no luck.Can any one help me with this.
    Thanks,
    Harsha

    Hi all,
    I followed all the steps to create a font file and then font mappings.Still when i click the priview button, the font is not MICR in pdf output.I downloaded GnuMICR and still no luck.Can any one please tell me if you have got the pdf output in MICR font either in rtf template preview or in apps preview if so can you guide me.
    Thanks
    Harsha

  • How to install MICR fonts for R1 check Printing.

    I saw several messages on the MICR.
    Anyone used BI Publisher 10.1.3 and still sucessfully uised metalink Note:373377.1?
    I am using BI 10.1.3..What are the steps I need to follow?I followed the same from the Note:373377.1,Still no success..
    Is that true that in case of BI publisher, i heard that BI publisher is stand alone.(It is not like XML publisher as the databse is not embedded) the fonts needed to be installed at server level..
    How true is this?Can anyone please help on this?
    thanks
    prasanna

    Using MICR in XMLP is like using any other special font (i.e. barcode). Please see below some link on how to have the fonts(MICR) working on your templates. Also, you could buy fonts but may want to try first on the MICR font shipped with the BI Publisher Desktop (i.e. C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\fonts).
    http://blogs.oracle.com/xmlpublisher/2006/06/how_to_install_a_font_using_xm.html
    http://blogs.oracle.com/xmlpublisher/2007/05/barcoding_101.html
    regards,..

  • MICR Font in CHECK

    Hi all,
    In my check printing, i have used the Paragraph format  "MI" , which has the Font Family "MICR_E" and size "10". I have given like,
    MI     C&REGUD-CHECT&C A&REGUH-UBNKL&A &REGUH-          UBKNT&C
    but in the MICR Printer it is not Printing. please guide me.

    Try to print the standard text from SO10 to the check printer and see if you can see the MICR codes.
    SAPSCRIPT-MICRTEST
    If it prints correctly then check for the printer to which you are printing from F110.
    Create a spool for the check to be printed. In raw data of the spool check for MICR there should be an FC if its not there then you have to check for the Printer fonts if MICR is added to the printer font or not.

  • Cheque printing using MICR fonts on HP P3005n series

    Hi,
    I am doing a HCM implementation on ERP 6.0 ehp3 server. We need to print cheques using the MICR fonts on HP P3005n printer.
    I found that MICR_C and MICR_E fonts are already installed in the system. But when we try to print, the MICR characters are not getting printed.
    I have tried with different device types like TROYMICR, HPLJMI, HP5MI, ZHPP3005 but no luck. The printer uses the toner MICR-THN-51A
    Where could be the problem? Do i need to do some more configuration in SAP or is printer needs to be configured?
    Please help me as we are in testing phase and as the cheques are not printed we are stuck.
    Is it necessary to use TROY or Jetmobile printer to print MICR characters?
    Your inputs will be highly appreciated.
    Thanks

    Hi Naithan,
    If you are facing this problem pls install HP default printer in SAP. I hope you will not getting this problem.
    Can you tell me the cheque prining setting in DMP printer or Laser printer. Please check this with your abaper programmer. If setting in DMP then you have to use DMP printer.
    Regards,
    Anil

  • Check Printing with Signatures,MICR,Logos

    We are implementing Oracle Payables.
    Could any one tried Check Printing with Signatures,MICR,Logos.
    If so could you please let me know hoe to hadle this problem.
    Thanks
    Harish.

    Hi all,
    I followed all the steps to create a font file and then font mappings.Still when i click the priview button, the font is not MICR in pdf output.I downloaded GnuMICR and still no luck.Can any one please tell me if you have got the pdf output in MICR font either in rtf template preview or in apps preview if so can you guide me.
    Thanks
    Harsha

  • MICR Fonts for check E13B

    Hi,
    I am working on checks. I am evaluating E13B ID Automation MICR fonts. ID Auto offers many fonts like IDAutomationMICR.TTF, IDAutomationSMICR.TTF etc.
    I would like to know which is the most widely accepted font for checks and what is the font size to use for printing checks.
    Thanks
    Neeraj

    Hi Tim,
    I was looking through a post regarding MICR Fonts for check printing:
    Has there been any further development done on this subject?
    "I am trying to setup an AP Check using XMLP and access the MICR font and the Signature "font" from the printer. I can of course get everything to work from MS Word, however, I need to be able to either - print it Directly from JDE using the RTF templateor I need to be able to print it from the PDF.
    Can I use embedded <esc> commands or PCL call before the PDF is created and if so, can anyone provide documentation or direction on how to set this up? "
    Your help would be much appreciated, Thanks
    Nelly

  • Check Printing Not displaying Courier Font

    I am working on check printing report and when i am previewing the output i am not able to see the Courier Font in my output, I am able to see MICR font as i have modified xdo.cfg file, But i am not able to see Courier Font (Normal and Bold). When i checked the Windows\Fonts directory i could see Coure.fon, which i have copied to XML publisher directory Fonts folder.
    I am using XML publisher 5.0.0, any help would be appreciated.
    Thanks!

    Thanks all for your help, I am able to preview the Courier font now. I am including my solution, If someone faces similar issue.
    To add an XML Publisher property to a template use the Properties dialog (File -> Properties --> Custom Tab):
    Name :xdo-font.COURE.normal.normal
    Type :Text
    Value :Type1.C:\WINDOWS\Fonts\COURE.FON
    Edited by: user8909874 on Jan 6, 2010 9:04 PM

  • Not able to view MICR fonts in the Print Preivew

    Hi All,
    I can the check number - Bank routing number - Account number printing in the Print preview of the script. I have Used MICR Fonts (MICR_E) and given the code like this -
    C&REGUD-CHECT&C:C&REGUH-UBNKY&C:C&REGUH-UBKNT&C
    But it looks normal in the print preview.
    I want to know how it looks lin the print preview ? Should it look like the MICR Fonts in preview or it only Prints when it is printed.
    Thanks
    Senthil

    In terms of Sapscript (and I guess smartforms) then you will not see the MICR in the preview as the font usually only exists in the printer.  In theory you could probably load a MICR Truetype font and use that but it is simple enough to test print with the MICR font cartridge.
    Cheers
    Allan

  • How to change font size in check printing program in AP Invoice

    I would like to know how to change font size in check printing program in Oracle Payables Module for Invoice printing. We are using Oracle standard
    report to print check.
    Concurrent program short name : APXPBFEL
    Prt file : APLASP.prt
    I modified prt file for code 199 like below
    code "199" esc "(8U" esc "(s0p12.00h10.00v0s0b3T" esc "&k11.75H"
    Font size changed for last page only which prints checks, for Void pages its printed with default font. For Page 1 printed with default font and page 2 has reduced font. This change is not intiallized for all pages.
    Please let me know if you any of you know how to change fonts.
    Thanks,
    Anand

    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

  • MICR font not displayed in PDF on SUSE Linux Server for Check Writer (XML)

    We are generating checks by running the Check Writer(XML) concurrent request and are not able to see MICR fonts on the Check. We downloaded the free version from IDAutomationSMICR.ttf and the fonts were registered under /usr/local/fonts/micr directory. I registered in APPS and uploaded the file IDAutomationSMICR.ttf. Am I missing any steps. The DBA's have registered the fonts under /usr/local/fonts/micr on SUSE Linux Server . The custom Checks are generated but no luck with the fonts. Please advise. Can I download MICR fonts other than IDAutomation site? Appreciate your response.
    Thanks,
    Hari

    I use version 11i, so the steps are probably different. Download a font file (gnuMICR for me). Extract it to a location of your choice on your operating system.
    Follow these steps to load the MICR font to the server. (Step 11 was missing in some of the metalink documents in late 2007. I think Jan. 2008 will be OK).
    1.     Log in as XML Publisher Administrator.
    2.     Navigate to Administration->Font Files->Create Font File.
    3.     Fields are Font Name and File. For Font Name choose any descriptive name. File will browse your PC to locate the font file.
    4.     Navigate to Font Mappings->Create Font Mapping Set.
    5.     Mapping name is the name you will give to a set of fonts. [MICR Font]
    6.     Mapping code is the internal name you will give to this set. [MICR]
    7.     Type: 'PDF Form' for PDF templates. 'FO to PDF' for all other template types.
    8.     Create Font Mapping (this allows you to add multiple fonts to a set).
    9.     Font Family is the exact same name you see in Word under Fonts. If you don't use the same name the font will not be picked up at runtime. [GnuMICR]
    10.     Style and weight must also match how you use the font in Windows. Normal and Normal are good defaults. [Normal, Normal]
    11.     DO NOT enter Language or Territory
    12.     Choose a value for Font Type. [Truetype]
    13.     Search for the Font you just created in step 3. [GnuMICR]
    14.     Navigate to Configuration -> FO Processing -> Font Mapping Set. Can also be done at data def and template level under Edit Configuration. Hierarchy is Site-> Data Def -> Template.
    15.     Select your new mapping set.
    16.     Make sure the font is not referenced under File->Properties->Custom in the RTF template file.
    17.     Select a temporary directory on your concurrent processing node (Configuration -> General). This needs to be a private area not shared by other processes, read writeable by the applmgr (owner of the $APPL_TOP file system). It should be fairly large 5 GB or 20x larger than any datafile being used. The fonts will be downloaded here the first time they are used.
    18.     Also at this site level select your font mapping set.
    19.     Upload a template that uses your special font and test using preview.

Maybe you are looking for