Microsoft direct push not working with Versamail build 77

Help,
After 2 or 3 emails or just a few minutes I get an error that states "Please sync your EAS account" when set up to receive emails as they arrive. Sync every 5 minutes works but drains battery and does not notify me immediatly of an email. This occurs using the versamail build 77 for Centro just released on Jan. 16, 2008 with exchange 2003 from my company. Other smartphones work just fine when set up "as they arrive".
The error in detail says Microsoft Direct Push enabled Disconnected Error 0006:1212:1480
Please Help!
What do I do?
Post relates to: Centro (Sprint)

Oddly enough, this has been just resolved... Palm/Sprint recently released a firmware upgrade for the Centro, and one of the things that changed is that VersaMail supports Direct Push again... and I think it's working pretty well!
My understanding is that this is only for the Sprint version right now, so hopefully there'll be similar support for the other versions soon.
http://www.palm.com/us/support/downloads/centroupdate/sprint.html
Post relates to: Centro (Sprint)
Post relates to: Centro (Sprint)

Similar Messages

Windows 8.1 Standard with Microsoft Account does not work with WSE 2012

I have a WSE 2012 machine with 3 users & 3 devices setup.
My Windows 8 (Standard) Laptop with Local User connects fine.
My Windows 8.1 (Standard) Nettop with Local User connects fine.
But my Windows 8.1 (Standard) Laptop with a Microsoft Account does not automatically login to the Server. It worked fine when it was running Windows 8 with a Local User but unfortunately in 8.1, MS decided to force a Microsoft Account login on us if I want
to continue to use Sky Drive! That would be fine, but now it wont login to their own server product...
I've tried adding a Windows Credential (set at Enterprise level) to the Credentials manager but it just gets forgotten on reboot.
If I log into the LaunchPad (which creates a temporary credential) then it works fine HOWEVER the "remember me" tick box is being ignored and the next time I restart the PC the LaunchPad is signed out again!
I've re-installed the connector.
I've removed the PC from WSE, un-installed the connector and then re-joined. (Done this twice, once as a local user and then converted to MS Account, and once as an MS Account.)
Basically, I just don't think WSE2012 with non-Pro versions of 8.1 on a MS Account have been tested and MS need to either fix it or document it. If someone could just get the LaunchPad to remember my local login and automatically start on next reboot then
it wouldn't be a problem. OR stop launch pad from deleting the manual credentials I added everytime I reboot. At the moment it's the worst of both worlds.
Any ideas?

Hi Susan,
Thanks very much for replying, but if you re-read my post you'll see that I already know how to do that and also that I don't want to change back to a local account because I need Skydrive access.
Essentially as it stands, I can use Windows 8.1 with WSE but lose SkyDrive (and any other MS Account benefits) or I can use an MS Account with Windows 8.1 but lose permanent access to my server shares and client backups...
Reading around it seems that it's perfectly possible to have an MS Account and then do one of the following:
Use a Windows Credential stored for the local user to give access to the Server.
Set the LaunchPad to automatically log in at start-up.
If on a Domain, go into settings and Link the MS Account to your Domain Account.
Unfortunately none of these options are working for me (3 isn't even possible with 8.1 Std).

Microsoft Arc Mouse not working with my Windows Xp home computer

I bought the MS Arc Mouse yesterday and plugged the USB into my home computer and nothing happened. I didn't get a popup saying "new hardware recognized" or anything and the mouse did not work. I tried the mouse in my mom's laptop and it worked instantly... does this mouse work for home computers? Why isn't it responding?

Unplug mouse.
Download driver: http://www.microsoft.com/hardware/download/download.aspx?category=MK (You need to select operating system, etc).
Install driver, and replug in mouse.
If it does not work at that point, establish that you are plugging it into back USB ports rather then front (as sometimes front USB ports are not powered). Also, try rebooting and changing ports.
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox

Fujitsu tabet m532 usb driver not work with flash builder

Hi,
I have a fujitsu tabet m532 that is not among the list of certified device but has its own of 32 bit usb driver.
But flash builder 4.5 cannot find the driver.
The hardware id I try also not work:
USB\VID_04C5&PID_133A&REV_9999&MI_01
USB\VID_04C5&PID_133A&MI_01
Can you help?
Thanks
Also, can I just edit the inf file using notepad and make it display line by line or any editor I would need?

Moving this discussion to the Using Flash Builder forum.

Microsoft PPTP / GRE not working with UC320

We just upgraded our phone system to a UC320. We are configured with the default VLAN settings. I have added port forwarding for 47 and 1723 but when I try to cennted with the Microsoft VPN optin with my Windows 7 desktop I receive an error 619. Does anyknow if this is possible with the UC320 adn what I should try to get this working again. It worked with our old router.

Hello. So, does Portforwarding work at all on this unit?
I am trying to do some portforwarding on my UC320. I am using the ip address of 192.168.24.1 as the default gateway for my LAN, which is the UC320. I am using a Cisco SF302-08P Managed POE switch with an IP address of 192.168.24.2. From the UC320 i can ping the SF302-08P and visa versa. However, when i try to port forward in the UC320 to the switch (so i can manage both remotely) it doesn't work.
The Port Forward rule i'm using is as follows:
TCP/UDP Port 8090 forward to 192.168.24.2 port 80.
I have also tried many permutations of this rule using multiple ports on the WAN side (80, 8081) and just using TCP (no UDP). All variations produce the same result - nothing!
Also, i do have http management enabled on the switch. I can manage the switch just fine from my web browser just by entering 192.168.24.2. So that seems to be working as well.
PLEASE HELP!!!!

Push not working with mobileme.

Hey,
got my iphone 3gs a few days ago and despite turning push on and also fetch on every 15 mins the emails only come through when i manually open mail and click the refresh button, some emails that should have arrived 5+ hours ago.
any ideas? thanks

My advice would be to log into your mobile me account and go to your account page to see if there are any issues with the servers. Bottom right corner. Or you can leave this forum and go to the mobile me forum to see what the buzz is. However you should know that Apple has acknowledged that launching Mobile Me was a bit premature and there are still some kinks to be worked out. It runs great most of the time but there are little hang ups. I've not been getting my mail pushed for a day or two, but today it's working great. You can always delete your MM account off your phone then restart your phone and set up account again. That sometimes works for a quick fix. There is a more detailed plan of action but you'll need to find it on the Mobile Me forum. Good luck!

Microsoft Office will not work with Lion!

Have just installed Lion, now I can not use microsoft office (Word,XL,PPS), message says "POWERPC applications no longer supported" Any help appreciated.

Sounds like you are using Office 2004 or earlier and if so, as the error message provide indicates, PowerPC applications are no longer supported with Lion, and Office 2004 was witten for Macs with a PowerPC processor. The reason PowerPC applications worked on Macs with Intel processors prior to Lion was due to what is called Rosetta, which is no longer supported with Lion.
I believe Office 2008 or whatever the next version was after 2004 and Office 2011 is supported since these are witten for Macs with an Intel processor with OS X.

Microsoft Office 2011 not working with OSX Mavericks

Hello,
I downloaded OSX Mavericks within the past two or three days, and I've been able to use Microsoft Word just fine. I tried opening PowerPoint today and it crashed, so I updated the Microsoft Office package. Now, I cannot open anything but Messenger.

Went through this exact problem two weeks ago.
Basically, when I installed I then updated and only Word would open correctly. After calling the help desk and going through a ton of suggestions we got it to work by doing update 14.1.0 and then opening Word and updating to 14.1.2. This fixed my problem and it hasn't repeated... and I use the whole office suite daily.
IIRC it was the 14.1.2 update after 14.1.0 that did it, however you can call Microsoft support... just make sure you have about 45 minutes available if you have to do some serious troubleshooting if the two updates don't fix it for you. Keep in mind this worked for me so YMMV.

Microsoft Office 2011 not working with Mountain Lion

I just upgraded to mountain lion last night.... I can not access anything in my microsoft 2011 suite that has been installed on my macbook for about a year. I get a microsoft error reporting pop up and will not open. It stops on "Opening font 16%" on the microsoft startup......?
How do I fix this?

I also came to the conclusion that it must be a font issue, but i've got hundreds of non-standard fonts that i use... time to clean house! Thanks for the tip.

Microsoft Mail not working with Windows 7 & MS-Office 2010

Dear All
I have a client who is using Microsoft Mail for their internal mailing. They have been using MSoffice ( Outlook) for this purpose for last so many years.
We have found that Microsoft Mail does not work with Windows 7 and MS Office 2010 combination.
When you try to configure it given error 0x8004110.
When we tried with different versions, we found that if you install Office 2007 it works. If you try Office 2007 and then Office 2010 and remove Office 2007, it still work. But Then it is treated as 2 installations of Msoffice on the same computer.
I need to know whether this is right from Licensing perspective. We 'll be using single copy of office but it may seems as we have installed Office 2007 & office 2010 on same computer.
--Shekhar

We have found that Microsoft Mail does not work with Windows 7 and MS Office 2010 combination.
When you try to configure it given error 0x8004110.
Windows 7 is a supported operation system for Office 2010. At what exactly point will you get the specific error?
Is that a Click-To-Run version of Office 2010? By default, for MSI-based version of Office, when you upgrade existing Office 2007 to Office 2010, the earlier version of Office will be removed:
http://office.microsoft.com/en-us/excel-help/keep-earlier-versions-of-office-programs-when-installing-office-2010-HA102597134.aspx
For licensing advice, as <Don> suggested above, you should contact your local Microsoft customer support or reseller.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

DefaultFileName does not work with apache-webligic bridge in service pack 5

The DefaultFileName directive does not work with apache-webligic bridge
from service pack 5. It used to work with the apache-webligic bridge
from service pack 3. Can anybody tell me why? Thanks.
Wei

I also had same issues using iPhone 5. Got chance to speak with senior engineers at NTC and they have confirmed 3G equipment they are using is not yet compatible with 3G band that iPhone 5 uses. So technically speaking, iPhone 5 has a hardware that is a generation ahead and not backward compatible to 3G system NTC currently uses.
On a bright side though, they confirmed that NTC is aware of the situation and is soon upgrading its hardware within next 1 or 2 months which will finally support 3G on iPhone 5. The other operator though already has support for this (don't want to mention their name but you know the alternative).
As for me, I'll be waiting for the (super frustrating) NTC to upgrade their hardware.
BTW - Apple has nothing to do with this issue.

Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

I originally posted this question here:
answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
and was asked to post it on this forum...
I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power. I have finally gone back the previous version 9926, which has its issues but no where near as bad
as not having any network connectivity! Does anyone have this issue and a workaround?
Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
this... Thanks!
I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
(but I suspect not just the only culprit) in this above mentioned problem...
10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop.
Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
that has happened with the Cisco software install attempts under 10041.
Another note: CISCO Anyconnect also has the issue.

You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

I tried to answer in your other post.. please stick to one thread ..
What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

I have a website that I am building. Transferring word docs to the site by copy/paste does not work with firefox.Why?

I am trying to complete my website data entry with fire fox since the security of internet explorer is questionable. I am having no success in transferring written or graphic documents from Fire Fox to my website.

I assume this is a sitebuilder tool. Could you mention which sitebuilder it is?
Is the problem that a paste button provided by the sitebuilder does nothing when you click it? This could be related to a Firefox security feature that bars sites from reading your Windows clipboard. Or it could just be broken. If it's a sitebuilder button, I could look into past threads for possible solutions/workarounds.
For pasting text, instead of using a button provided by the sitebuilder, can you use one of the Windows shortcuts?
* Ctrl+v
* right-click > Paste
* Edit menu > Paste ''(if you use the classic menu bar)''
That might not work with images...
Finally, I will say that Internet Explorer 11 is a pretty solid product. If you need to use it for your website builder tool because it only works well in IE, I don't think you are taking a lot of security risk there. Just don't stray over to random sites you don't trust.

Versamail Auto-sync feature not working with AOL mail w/Treo 700p (Verizon)

I'm having a problem with the Auto-sync feature not working with my 700p (verizon) with my aol mail. It had worked perfect since May 2007. Just started having problems End of April 2008. Sounded like I needed another incoming mail server from aol other than: imap.aol.com, aol told me they also use pop.aol.com, that isn't working either. I get an error message that says "last auto-sync attempt failed."....Anyone else having this issue? I'm trying to decide whether to get rid of my aol mail of 14 yrs and use other address to continue using versamail 3.5 or keep aol and use Verizon Wireless sync. I do not like how wireless sync sends mail to outbox and then syncs vs sending right away. Please help...
Post relates to: Treo 700p (Verizon)

I am having the EXACT same problem: Palm 700p, Versamail, AOL, Verizon.
It started about 1 month ago. The GET still works, but AUTO-SYNC does not...After spending hours on the phone with Palm tech support, and reaching someone who said AOL had changed something in their servers. They suggested TRYING Chatteremail, another Palm product. I have tried it for 20+ days out of the 30 days you get for free. It works pretty well, but NOT every e-mail that goes to my AOL acct is making it to my phone. The thing that's great about Chatter is that can be "live" all of time. Not auto-syncing every 15 minutes.
It's very frustrating....The same way the Versamail just stopping auto-syncing is very frustrating. With Versamail, sometimes I did not even get the error message. If Chatteremail worked consistently, I would bite the bullet, and pay for it, but to pay for it, and have it not pull down all the e-mails, all the time is not good.
I spoke to Palm Tech Support in N. America today, and they say the way AOL uses IMAP servers is in a non-traditional way, and it's very hard to deal with. They suggest ditching AOL, and using something reliable for syncing purposes like GMAIL. It's just hard to cut the cord. The man I was on the phone with knew of my problem, and he solved it by getting rid of AOL. It's just tough, since so many people have the e-mail address for me.
On http://mobile.aol.com/aolproducts/mobile-email/mail-client
there seems to be some indication when you click on Smart Phones on left, that Coming Soon is Palm, but I don't know if that's going to be downloadable for 700p, or Palms moving forward. Or how far away that is.
I tried wireless sync and hated it.
This is really a pain in the butt.
*** Who did you speak to at AOL?
*** How did you reach them? e-mail? phone #?
I also did a search and found another program called "Snappermail", which I might try, and see if it's any better than Chatteremail.
http://www.handango.com/SoftwareCatalog.jsp?jid=24BX5EEAD31DXE6AB588D59X31E95BD5&osId=904&siteId=1&N...
If you find anything out, please let me know here, ok? This is very bad for me.
Post relates to: Treo 700p (Verizon)

Microsoft direct push not working with Versamail build 77

Similar Messages

Maybe you are looking for