Microsoft LifeCam HD-3000 crashes application on exit

Hello! Crash is reproducable on Windows 8 ( on Windows 7 can't reproduce ). I used slightly modified version of AvCAPWPF. Steps to reproduce: 
Play any sound using WPF _before_ initializing HD-3000. 
Capture some video with HD-3000 either with DirectShow or with Media Foundation. 
Exit application and see this crash. It's not crashing always but quite often. 
Please, can you give me some hints on this? I can give you the app if you want.  If you capture video _before_ playing a sound everything is ok. If you play a sound using DirectShow instead of MediaPlayer everything is ok.
> ntdll.dll!TppRaiseInvalidParameter() Unknown
ntdll.dll!TpAllocWork() Unknown
KernelBase.dll!CreateThreadpoolWork() Unknown
RTWorkQ.dll!WorkItem::Alloc(class COsTPWorkQueue *,struct _TP_CALLBACK_ENVIRON_V3 *,void (*)(struct _TP_CALLBACK_INSTANCE *,void *,struct _TP_WORK *),void (*)(struct _TP_CALLBACK_INSTANCE *,void *,struct _TP_WAIT *,unsigned long)) Unknown
RTWorkQ.dll!COsTPWorkQueue::PutWorkItem(struct IMFAsyncResult *,long,__int64,unsigned __int64 *) Unknown
RTWorkQ.dll!CPlatform::InvokeCallback_NoPlatformLock(struct IMFAsyncResult *) Unknown
RTWorkQ.dll!COsTPWaitQueue::CancelWorkItem(unsigned __int64) Unknown
RTWorkQ.dll!CPlatform::CancelWorkItem(unsigned __int64) Unknown
RTWorkQ.dll!RtwqCancelWorkItem() Unknown
mfplat.dll!MFTEnumCache::FreeRegListener(void) Unknown
mfplat.dll!MFDeleteMFTCache(void) Unknown
mfplat.dll!CPlatformPools::ShutdownStart(void) Unknown
RTWorkQ.dll!CPlatform::FinalShutdown(void) Unknown
RTWorkQ.dll!CPlatform::Shutdown(void) Unknown
RTWorkQ.dll!RtwqShutdown() Unknown
mfcore.dll!CDevProxy::Shutdown(void) Unknown
mfcore.dll!CDeviceSource::Shutdown(void) Unknown
mfcore.dll!CMFDeviceSourceActivate::ShutdownObject(void) Unknown
CAL2.dll!00007ff893a85f7d() Unknown
CAL2.dll!00007ff893a35523() Unknown
CAL2.dll!00007ff893a3435d() Unknown
CAL2.dll!00007ff893a36f75() Unknown
CAL2.dll!00007ff893a4105c() Unknown
CAL2.dll!00007ff893a4115c() Unknown
CAL2.dll!00007ff893a3a7f3() Unknown
CAL2.dll!00007ff893a3adaf() Unknown
CAL2.dll!00007ff893a4066f() Unknown
CAL2.dll!00007ff893a3ad25() Unknown
CAL2.dll!00007ff893a36fc4() Unknown
CAL2.dll!00007ff893a7cc58() Unknown
CAL2.dll!00007ff893a7ce60() Unknown
CAL2.dll!00007ff893a7d0ee() Unknown
ntdll.dll!LdrpCallInitRoutine() Unknown
ntdll.dll!LdrShutdownProcess() Unknown
ntdll.dll!RtlExitUserProcess() Unknown
kernel32.dll!ExitProcessImplementation() Unknown
mscoreei.dll!00007ff8c0172d6f() Unknown
mscoreei.dll!00007ff8c0172ee8() Unknown
mscoreei.dll!00007ff8c0167cfd() Unknown
mscoree.dll!_CorExeMain_Exported() Unknown
kernel32.dll!BaseThreadInitThunk() Unknown
ntdll.dll!RtlUserThreadStart() Unknown

I think you need help from AvCAPWPF, I have no LifeCam now, so I can't help you to reproduce it
Best Regards,
Please remember to mark the replies as answers if they help

Similar Messages

  • WIN 8.1 and MICROSOFT LIFECAM HD-3000 compatibilty - Preview screen "blacked-out"

    It seems that there are hundreds of Users with Webcam issues since WIN 8.1 has been downloaded. I have trawled sites and Forums for procedures to ensure that my LIFECAM HD-3000 will work otherwise it a waste of £14.99. No solution has worked. Drivers and
    software have been re-loaded from official MS site, and/or Safe Starts undertaken, and/or uninstalling and then re-installing and nothing works.
    I think that the problem is that the CAMERA APP built-in with WINS 8 or 8.1 is "always on" in the background and stops other programs/programmes using the webcam output. Is one definitive answer to get webcams working in WINS8.1. Even the MANYCAM
    software fails to work with WIN8.1.
    Help. Thank you.

    Hi,
    This could be driver issue. Please contact the manufacturer to ask for the latest driver for your Webcam in Windows 8.1, and reinstall it to check the results. If there is not, we need wait for the updates from manufacturer.
    Meanwhile, to use webcam, we need to get it properly set.
    Set Windows 8.1 Apps that May Use the Webcam, Microphone & other devices
    http://www.7tutorials.com/set-windows-81-apps-may-use-webcam-microphone-other-devices
    This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
    Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
    completely understand the risk before retrieving any software from the Internet.
    Hope these could be helpful.
    Kate Li
    TechNet Community Support

  • Microsoft LifeCam VX-3000 not supported

    Since upgrading(?) to Win8, my webcam not longer works with skype. I have tried every possible option, including using the Microsoft support desk to see if there is a compatible driver for this camera. Apparently it is not supported by Microsoft (at this time ... and probably won't be). The same thing happened in "upgrading" to Win 7. I'm not willing to give up yet and buy another camera. Anyone experiencing the same problem?  Is there any other solution?

    You are very welcome.
    Sorry, i have no idea. Please See this thread:
    http://community.skype.com/t5/Windows-8/Webcam-not-working-Check-here/td-p/1161082
    Regards,
    Tamim
    Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
    If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

  • Lifecam HD 3000 problem

    Hi Forum, I hope someone out there can help with this one. I have just installed a Microsoft Lifecam HD 3000 and when video calling, my guests can hear me but not see me yet I can see and hear them perfectly. The camera is supposedly configured for use with Skype and to enable video chat and video recording. Have I set things up properly or is their something further I need to do?
    Mindarie22 (thats in Australia)
    Best regards
    Frederick

    Ross-12 wrote:
    I have exactly the same problem as described above. Microphone works well, I can see the person I'm talking to but they cannot see me. It works once then not again even though I can see myself when I go into options. When I check options during the conversation there no recognition of the cam in the camera box.
    Can anyone recommend another brand of webcam, as it seems to me the driver software is faulty and if Microsoft are interested in fixing it I'll go elsewhere ?
    Please,  run the DirectX diagnostics tool.
    Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
    Be aware that you will have to zip this file before attaching it here.

  • Photoshop element 8 opens a Crash report while exiting the application (win 7 64bit).

    photoshop element 8 opens a Crash report while exiting the application (win 7 64bit). however the program itself is working as we can see the saved data and function it.
    However no idea why it opens a crash report when the application exited properly. It's happening almost on 30 computers. re-install PS8 but still the same.
    Appreciate your help

    Yes please i cant find the source anywhere. I have tried in bunch of computer on all or win 7 64bit but couple of them opening the crash report. Having said that program is working with no issues. it just opens the window when i exit from the application
    it happens only under EDIT not on Organise
    I have tried uninstalled and re-installed still it doesnt work
    Appreciate your help

  • Why can't skype identify my camera - "lifecam HD-3000 microsoft ?

    why can't skype identify my camera - "lifecam HD-3000 microsoft ?

    Hi,
    I would recommend you to perform the steps mentioned below and check if it helps:
    1. Temporarily disable all the third party security programs and boot in
    Clean Boot to exclude 3rd party factor’s effect.
    2. Update your video card drivers and BIOS to the latest version.
    Hope it helps.
    Tracy Cai
    TechNet Community Support

  • Windows App Certification Kit 3.4 error occurred while generating the report (the application will exit)

    Hi all,
    I've encounter a pretty big issue while trying to check if everything with my windows phone 8.1 app is all right. After creating package (*.appx) I launched Windows App Certification Kit 3.4 to run it against all the test. Each time I try I get an error saying
    "an error occurred while generating the report. the application will exit" and Certification tool just crushes
    I looked online for some solutions but couldn't find any. Somebody knows what is going on and how to fix it ?
    Can't insert images into post because of not verified account so imgur:
    http://imgur.com/ptT0cU3

    Try sending it to store anyway… I have the similar issue, the kit hangs when saving result and never complete it.
    Another member has same question.
    https://social.technet.microsoft.com/Forums/en-US/11910167-75e1-47d8-a0fb-fb8046c57f89/windows-app-certification-kit-31-reports-failure-due-to-crash-or-hang?forum=projectsiena.
    If you want to test your app, you can also send to beta store and you can get response from the testers.

  • Lifecam HD-3000 Drivers only

    Does anyone know how, on a large scale, to only install the drivers and leave out the lifecam software?  We have roughly 300 of these to deploy and have already grabbed the drivers only from the install  but when you plug the camera in it still
    tries to go install the software.  We do not want to turn off all windows update driver installations.

    Hi,
    I just would like to know how you grabbed the driver from the installer.
    The installer I can find is below, and I can't find the driver file like inf file after unziping it:
    http://www.microsoft.com/hardware/en-in/p/lifecam-hd-3000#support
    And it's just a web installer, it was installed with downloading at the same time.
    I don't think the driver can be seperated from the software installer.
    I agree with Pranda, let us know how you grabbed the driver out.
    To manage the device and make it work fine, we have to install the software.
    Kate Li
    TechNet Community Support

  • CR2010 Report Viewer control crashes application when deployed

    I have been using the latest release for CR2010, on a Win 7 x64 machine running VS2010 targeting .Net Framework V4, and all is working fine.
    However, when I publish my WPF application as an x86 client and deploy to a WinXP machine, the Report Viewer control crashes the application.
    Any clues out there?

    Yes there is not much to go on. As I described, the symptom is a crashed application - nothing else I can tell you. When you select a report to load into the Report Viewer control - down it goes with nothing more than a "send this dump to microsoft" message.
    I do have some further enlightenment however. I can deploy the application to the standalone machine straight out of the Release bin and it works fine. Given that is the case I can rule out the CR2010 run time install as the issue. What I suspect is the problem is that the individual report files (.rpt and .cs) are not being packaged by the VS2010 publisher.
    There may be a way to do this, but I do not know of it at this point in time, so I have marked this problem as having been solved, but I would like to know if anyone has a solution to the deployment of CR files using VS Publish.
    Thanks

  • Reading objects from a binary file works but crashes LabVIEW on exit

    I've been hunting for the source of some crashes on LabVIEW exit and I was finally able to track it down to this. In my application I wrap measurements into objects that I stream into a binary file during the inspection. In another application I read the file again to browse and analyze the measurements. All this seems to work just fine except that the reading part causes LabVIEW to crash once I close the IDE. Built applications don't report any crashes but I am afraid if it might still cause some instability or unexpected behaviour.
    The snippet below represents the writing and reading scheme I use and with which I am able to reproduce the problem every time. I attached the project for testing it.
    Parts from the internal warning report:
    #OSName: Windows 8.1 Pro N
    #AppName: LabVIEW
    #Version: 13.0f2 32-bit
    DWarn 0xEFBFD9AB: Disposing OMUDClass definition [LinkIdentity "Class 1.lvclass" [ My Computer] even though 1014 inflated data instances still reference it. This will almost certainly cause a crash next time we operate on one of them.
    Possible path leak, unable to purge elements of base #0
     The full log is also attached.
    Notes:
    Remember: the reading works without any problems, the crash after LabVIEW exit is what I'm concerned about
    Seems to only happen with classes/objects—not the default LabVIEW Object, though
    Prepending array size or different byte orders make no difference
    The writing is time critical, the reading is not, in case you wish to suggest other options
    Has anyone else run into this? Should I be concerned for the built applications or can this be simply ruled as an IDE problem?
    Solved!
    Go to Solution.
    Attachments:
    test_project.zip ‏16 KB
    lvlog.txt ‏5 KB

    Right off, if you say you can read and write lv objects, try casting your object as a lv object before saving it. The lv object is the ultimate parent of all classes.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Microsoft LifeCam VX-7000 driver for MacBook Pro with retina display

    Microsoft LifeCam VX-7000 driver for MacBook Pro with retina display

    I see a mention of Google Chrome and VirtualBox in your log. Stop using those and see if the situation changes? From what we know so far, the problem is a software one (Apple's fault), not a hardware problem. Mountain Lion is supposed to fix the issue, which should be out in about a week. So you could wait til then, upgrade to ML, and see if its still crashing or not.

  • Microsoft Lifecam Studio HD not working with skype...

    Greetings, I recently upgraded my computer from windows 8 to Windows 8.1.
    My webcam works in the microsoft lifecam application, but when I attempt to use it in Skype, I just see the the swirling 'loading' icon for the webcam.
    I would like to resolve this as soon as possible
    Thanks

    When I say that it doesn't work with any webcam software in the desktop, I mean Skype, Windows Live Messenger, LiveCam Studio software, CyberLink YouCam and not even in the Microsoft Silverlight configuration.
    I know that the webcam is working because it works in the camera app of metro, and in the sound recorder of the desktop. Of course I can see that the webcam microphone is working, but using any of the above software have no video or audio.
    YouCam gives me this error message: "YouCam cannot connect to your webcam ( Microsoft LifeCam Cinema). Try selecting another capture device within settings, or close any applications that may be using this webcam and then restart YouCam."
    worked ok up till last week, downloaded Have reinstall all new drivers and Softwear up to date but No LifeCam.EXE File is missing from Software (US)
    Microsoft needs to fix this as cam only got as Skype Certified
    steve

  • Video Express 10 and Microsoft LifeCam

    Hi
    Is the Microsoft LifeCam supported in Presenter 10 video express? It worked fine in version 9, but every time I try and use it now after updating to Presesnter 10 I get an error message stating it is busy or not functioning (and it is not busy and it is functioning).  But it works fine in other applications.
    Thanks

    This area is for forum issues only.  You'll have better luck posting your question here:
    http://social.technet.microsoft.com/Forums/windows/en-US/home?forum=w7itprogeneral
    Please do not read this sentence. Please ignore the previous sentence.

  • Call an applications 'user exit' from a PL/SQL procedure

    My question is a technical PL/SQL question related to Oracle Applications. I need to call a standard applications 'user exit' from a stored PL/SQL procedure. Can anyone tell me if this is possible and how to do it?
    (i.e. I am attempting to call the AR user exit SALESTAX)
    Thanks,
    Michelle Dodge

    Hi,
    Read this thread, perhaps is there your response :
    Host...
    Nicolas.

  • Many years ago synced iCal with Microsoft program. Since installing Lion whenever I try to create an event in iCal it flashes up message "Unable to open Microsoft sync services Power PC applications no longer supported." How do I get rid of message?

    Many years ago synced iCal with Microsoft program. Since installing Lion whenever I try to create an event in iCal it flashes up message "Unable to open Microsoft sync services Power PC applications no longer supported." How do I get rid of message?

    Lion no longer supports PowerPC apps. If this is Microsoft Office 2008 (Entourage 2008) then you should disable the syncing services.  (I don't have Office 2008 installed anymore so I don't know exactly what it's called anymore.)  If you have Microsoft Office 2004 or earlier, then it can't be run on Lion at all since Lion removed Rosetta, which is what allowed a PPC app to run on an Intel based Mac.
    Also, I believe Microsoft removed sync services from the current Outlook 2011 (which replaces Entourage) so even upgrading to a newer version of Microsoft Office will not get you back that calendar sync feature.  Supposedly Microsoft is working on a new syncing system, but I wouldn't hold my breath.

Maybe you are looking for