Microsoft outlook 2010 post will not print

when will outlook 2010 be supported for eprint?

Hi jrm,
It may be your email, what is the email extension you are using?
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Similar Messages

Icloud works to syn my contacts and calendar with Outlook 2010 but will not sync mail any ideas ?

Any ideas ?

Howdy Ron,
Take a look at the article linked below, it will walk you through downloading iCloud for Windows and syncing iCloud information like contacts and calendars to Outlook on your PC.
Set up and use iCloud for Windows
Take care,
-Jason

Outlook 2007 will not print .html attachment

I have a user complaining that .html files will not print to any network printer when he right clicks and selects print on the file in the top of the message.
Repaired MS office 2007
Uninstall and install office 2007
Renamed the Outlprnt file to Outlprnt old from C:\Users\%Username%\AppData\Roaming\Microsoft\Outlook\
Created new outlook profile
Tried Safe Mode
Any ideas? It will work with PDF's and other documents. Just not HTML

Hi,
Will it print properly if you open the .html attachment in Internet Explorer?
Please have a look at a similar issue here and check if the solution works in your situation:
http://social.technet.microsoft.com/Forums/office/en-US/972e01a4-a00a-4dd6-b0e6-46e47463e146/outlook-2013-quick-print-not-working-for-html-attachments?forum=outlook
Quote:
To resolved this issue i tried below trouble shooting:
1) Repair MS office 2013
2)Uninstall and install office 2013
3)Rename the Outlprnt file to Outlprnt old from C:\Users\%Username%\AppData\Roaming\Microsoft\Outlook\
4) 2 times Re install printer drivers
5) Creat new outlook profile
if you Unable to print from Outlook 2013 without receiving the "Printer not ready" message (32/64 Win 7 Pro).
This changed worked for us, by selecting the Advanced properties on the printer and changing the default setting "Start printing immediately" to "Start printing after last page spooled".
I hope it works for you, good luck in your quest!
Tzuri Ben Ezra | My Certifications A Plus, MCP, MCSA, MCITP | FaceBook:
Tzuri FaceBook
Please let me know the result.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

My iphone 5 will no longer sync to Microsoft Outlook 2010. Any ideas how to fix this?

My iphone 5 will no longer sync to Microsoft Outlook 2010. Any ideas how to fix this?

Hi jenmik,
Welcome to the Apple Support Communities!
If you are having issues syncing your iPhone to Microsoft Outlook 2010, please read over and use the information provided in the attached article to assist you in troubleshooting.
Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010 - Apple Support
Cheers,
Joe

PSD files will not print from Photoshop CS4 (previously posted in Acrobat printing and prepress)

My questions are: Does the PSD file have the printer information encoded?
Also why has this just started to show up? My wife has work successfully under the same conditions, files moved and printed on different printers, with no problems in the past.
I (we) have been struggling with a recent problem trying to print PSD files from Photoshop CS4. (Vista 32 bit, Epson 3880 networked) When trying to print certain, but not all, PSD files I get the message: "Before you can perform printer-related tasks such as page setup or printing a document, you need to install a printer." I have been in contact with Adobe support about the issue but with little in the way of positive results. I was referred to a kb link: http://kb2.adobe.com/cps/409/kb409119.html Tried all that to no avail. (The first suggestion is absurd to the point of making me wonder what process is used to construct the kbs. You cannot open the print menu when you get this message so....?)
Other solutions are not acceptable for the work my wife is doing, editing high quality photographs for an exhibition with test prints and so on. We are under intense time pressue with four shows coming up in a very short time. The final solution offered is that CS5 has solved all of this. Hum? interesting. No comment except new program, new problems so not a real solution for us.
In searching the web about this problem I have come across many other people with the same problem working from different platforms and even different Adobe products. I noticed that the MAC OS seemed to cause the same problem and that there was a problem with Reader and Acrobat. In every case the problem is never solved by Adobe or anyone else and users find some "workaround". I too have found what we hope is a workaround in our contiued travels on the blogosphere, on flickr http://www.flickr.com/groups/wellington/discuss/72157621548183001/ as "...a nasty, nasty solution" but we skipped the flatten part and the GIMP part and resave the PSD under a different name.
Adobe does seem supportive but not that interested (CS4 right) but I would like to find a real solution and I think many people would benefit from it.
Anyway what I have found is that the PSD files that will not print have been printed on another printer at some time in the past. In my case the Printer was an Epson Artisan A50. The printer we are using now is the Epson Stylus Pro 3880. Even when trying to print wirelessly to the 3880 from the laptop (Was Vista, now Windows 7) that was used to edit and print with the A50, (USB connection) we saw the same error. So it seems that the printer information is somehow embedded in the PSD file (also mentioned in a Blog) and is keeping PS from seeing the printer because the same printer is not there.
Has anybody already found the fix?
I know this is a long post but I have been working on this problem and have heard all of the pat and frankly useless answers and workarounds. Can we find a solution and fix the problem?

Just a few examples, since you ask:
Dr Craig wrote:
…The first suggestion is absurd to the point of making me wonder what process is used to construct the kbs…
…Other solutions are not acceptable…
…The final solution offered is that CS5 has solved all of this. Hum? interesting. No comment except new program, new problems so not a real solution for us…
…In every case the problem is never solved by Adobe or anyone else and users find some "workaround"…
"...a nasty, nasty solution"…
…Adobe does seem supportive but not that interested (CS4 right)… b
…I have been working on this problem and have heard all of the pat and frankly useless answers and workarounds…
That attitude, Dr. Craig. Plus the verbosity you unconscionably inflicted on your fellow forum users.
Cheers.
Wo Tai Lao Le
我太老了       (Not posting as a scientist here
                           but as a Photoshop user
                           so I'll forego listing any unrelated academic titles.)

Microsoft Outlook 2010 email stuck at outbox, the mail will successful send out after you restart the outlook

Dear Mdm/Sir,
I've a problem on Microsoft outlook 2010 with service pack 2.
Sometime it cannot send out email, the email will stuck at outbox. It only work after you restart the outlook and resend.
I've add the 2 email account into this Outlook profiles and running at Windows 7 professional Operating system.
I've try run the Outlook into safe mode, but it can't solve the problem too.
I also create a new email profile and user profile, but still cannot solve the problem.
Please help,
Thank you,
Wcnw

Can you please check onto the Exchange server, the Outbox folder size and Items in it. Use the below command to verify the Outbox folder.
Get-MailboxFolderStatistics -Identity <Alias> -FolderScope Outbox
Look out for ItemsInFolder and FolderSize. If it displays content in it, you would need to remove the emails from the Outbox Folder. The Outbox folder can be accessed from the OWA light version.

OUTLOOK 2010. Does not reply to emails using the same address that received it.

Hello,
Since last week our Outlook accounts are not working properly, when users reply a message it does not reply using the same address that received it, it appears the personal account instead.
We are using exchange accounts, using Outlook 2010 and the accounts affected are automapped to a principal account (.ost).
We already tried to recreate outlook .ost profile, repair Outlook installation, reinstall Office.
Can somebody help?
Thanks in advance.

Hi,
We have received many reports as your description since last week. It sounds like the sending behavior in Outlook 2010 has been changed by some Windows/Office update and goes back to the behavior before.
Before we go any further, I have to mention some of the history for Outlook 2010. In Outlook 2010 without SP1, Mailto’s will use the default/principal account for message when you use Microsoft Outlook 2010 which has multiple accounts delivered to different
data file. However, in later version (Outlook 2010 SP1/SP2), Outlook doesn’t use the default account set in Account settings for new messages. Instead, it uses the account associated with the mailbox or *.pst file you have in focus.
Actually, this behavior is controlled by the registry keys. At this point, I suggest we check the following registry entries are exist and set it to the proper value.
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Options\Mail
DWORD value: NewItemsUseDefaultSendingAccount
Value type: REG_DWORD: 1 for force, 0 to disable.
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\outlook\options
Value Name: ForceAccountSelection
Value type: REG_DWORD: 1 for force, 0 to disable.
Close the registry editor and restart Outlook to check if the behavior what you want would come back.
In addition, our Outlook MVP, Diane Poremsky has written an article with more detail information:
http://www.slipstick.com/outlook/outlook-2010/multiple-accounts-and-the-default-account/
By the way, we still cannot figure out which update is the root of the issue, if someone could test it and share the result here, I would appreciate that. Feel free to post back.
Tony Chen
TechNet Community Support

OfficeJet 4500 will not print two sided over network

I'm running on Windows 7 with an OfficeJet 4500 G510n-z over WiFi. Printer works great except that it will not print two sided. We've used a non-WiFi 4500 to print two sided before. With the new printer the first pages print and the pop-up shows on the laptop (prompt to flip paper over) but nothing happens. The second pages never print.
I've run all of the HP print and network diagnostics. Everything appears to be OK.

The solution below was found on the sticky post at the top of this board "Fixes and Workarounds from HP"
I think the patch below only applies if you have the original printer software installed, I assume this issue was fixed in later versions of the printer software, Read the patch information carefully.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-69847-2&lc=en&dlc=en&cc=us&...
This Print Driver Update contains improvements for issues related to the following applications and/or print functionality:
     Microsoft Office 2007
     Duplex printing via network
     Printing from Intuit applications
     Print margin accuracy
     Thai language font

Elements 8 Editior will not print !!

I am extremely annoyed at Adobe as Elements Editor (8.0) will not print!! I have seen a number of complaints about this and I have tried multiple things to fix the problem. I own many different Adobe products (Design Suite 5, Reader, Acrobat, Elements) as well as many other programs (Office 03, 07, and 10, Corel Suite of products, many photo related programs, etc.) and they all work fine on all te printers attached to my computer. Even Elements organizer works perfectly.
With the Elements Editor I get an error box that starts with “Before you can perform printer-related tasks such as page setup or printing a document you need to install a printer”.
Another post to this forum suggested using the Microsoft XPS document writer print driver. I tried that and it did get me a bit farther in that I finally was able to get the print dialog box up; however, whenever I selected another printer I got an error message telling me there was a fatal program error and I had to eventually quit and re-start elements.
I have looked for Elements updates – and none are available. Someone suggesting re-loading the program and I really do not want to do that as the program works perfectly (as dies the organizer) except for printing. I have recently updated the print driver so that cannot be the problem and as I said – you can print directly from the organizer.
To make matters worse I got so frustrated looking for a web address or e-mail for sending my complaint to Adobe that I gave up – none could be found.
Can anyone let me in on the secret as to how to print, or get the editor to recognize the printer, from Elements Editor?
Thanks – Mike

Mike,
You state: " I have recently updated the print driver so that cannot be the problem and as I said – you can print directly from the organizer."
I have been led to believe that the print engines for Editor and Organizer are not the same, even though they are marketed within the same program. It may be that the driver for the printer antedates the production of PSEv.8.
Have you tried using another printer (of recent vintage) for printing from Editor?

Black ink cartridge will not print

I just finished a one hour online chat with HP Support. The black cartridge of my C6180 will not print. After going through many steps the Support tech stated "I appreciate your patience and efforts in performing all the troubleshooting steps provided. I apologize to inform you that we have tried all the possible troubleshooting steps that should have resolved the issue. However, the issue at hand is with the hardware of the unit."
My printer, the C6180, is only 15 months old and I paid $239.99 + charges - no warranty purchased. This printer was only used in my home and always treated gently. I was told that the best HP can do for me is allow me to purchase a refurbished C7280 for $224.99 or a refurbished C8100 for $239.99. Needless to say, I refused the offer. I informed HP that I will never purchase another HP product. BUYER BEWARE!

ELF123 wrote:
I have the HP Officejet J5780, I have had the printer for a year and I have NEVER been able to print out of the Black cartridge. I always have to change my documaent to a color in order for it to print. I have replaced the catridge a few times, thinking that would help, still will not print.Using black cartridge # 74.
Thank you
What happens when you make a black copy? Does the printer go through the motions of printing but there is no black ink on the page? Try printing a test page from the front panel as shown here. If there is no black printing then remove the black cartridge and gently blot it on a damp tissue. Do you get a mark of solid black ink? If there is a blot of black ink but no black printing in the self test pagethen your printer likely requires service.
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Officejet Pro 8620 will not print old documents, only newly created ones

When I use the driver designed for the printer I can only print documents (Word, Excel, and Publish 2007) that are new, as long as I have not copied and pasted or inserted sheets from previously created documents. It will not print any Outlook 2007 emails but it prints PDF's fine. Also, the printer works fine with driver for deskjet 990c but limits my options on page size and the margin on the right side won't change and are way to big for most of my documents. Any thoughts?

This is very peculiar @bmphr
Running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor> >>>>> www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
Thanks, I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Apple Applications Will Not Print

After installing new Epson 2.1 print driver in Snow Leopard all Apple Applications will not print now. (Text Edit, iPhoto, Safari …ect.) Yet all other Applications will print Adobe, Microsoft ect. ) Try downgrading print driver, but that did not work to solve problem. How can I solve this problem?

The printer drivers that shipped with the original SL are on the install disk and should be extractable with Pacifist. Additionally, if you're familiar with the Terminal.app, pop in the install disk, enter this in the Terminal window, and hit the return key:
*open /Volumes/Mac\ OS\ X\ Install\ DVD/System/Installation/Packages/*
That opens the folder holding the install packages. Drag the Epson ones out to the Desktop and manually install them.
If that doesn't fix things, then call Epson, since they put together the update package described in http://www.apple.com/downloads/macosx/apple/firmware_hardware/epsonprinterdriver sformacosxv1061.html
Just saw your latest post. If the above doesn't fix things, then file a bug report with Apple via its Bug Reporter system. To do ths, join the Apple Developer Connection (ADC)—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report or enhancement request. The nice thing with this procedure over submitting feedback is that you get a response and a follow-up number; thus, starting a dialog with engineering.

My hp4500 will not print a complete list of pages. if there were 5 pages it prints 2 then stops

My printer will not print all the pages when i print multiple pages. if i want 5 pages of documents i get 2 and it stops and i need to start with the numbered pages. it prints 2 more then stops. i had this problem before but for got how i was told to fix it

Hi,
Microsoft has released an Hotfix which should address such an issue.
Install the Hotfix below and check for any difference:
http://support.microsoft.com/kb/3000461/en-us
Please let me know if that help getting the problem resolved.
Regards
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP CP3525dn will not print a specific range of pages

Our Color HP Printer model# CP3525dn will not print a range of pages within a MS Word document HELP

Hi,
Microsoft has released an Hotfix which should address such an issue.
Install the Hotfix below and check for any difference:
http://support.microsoft.com/kb/3000461/en-us
Please let me know if that help getting the problem resolved.
Regards
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Officejet Pro 8600 - Macbook Pro and Macbook Air will not print

Products:
HP Officejet Pro 8600
Macbook Pro (Mac OS X, Version 10.7.5)
Macbook Air (OS X, Version 10.8.2)
Question:
Why did my Macs initially print fine, but now will not print at all?
Full Story:
I have a wireless network at my house that consisted of a 30mb cable internet, Netgear 900n, HP Officejet Pro 8600, 2 Dell Laptops with Windows 7, a Lenovo Laptop with Windows 7, and Dell Tower with Windows 7 - All printed just fine.
The HP Officejet 8600 was added to my network about 2 months ago.
I added a Macbook Pro and a Macbook Air about 3 weeks ago. Both Macs printed just fine for about a week. Then suddenly they stopped. I spent about 2 hours on the phone with HP Service, and they finally said it must be my router. So I called Netgear. Netgear was useless! They wanted me to agree to charges for services before they would even discuss the issue.
Due to information provided by HP's service support, and because Netgear will not support their product, I promptly purchased a new router - an Apple Airport Extreme.
The Macs recognize the printer, will print if hardwired via a USB cable, but will not print wirelessly to the Officejet Pro 8600. The PCs print fine.
The frustration that is being felt is compound by the fact that the Macs printed just fine with the Officejet Pro 8600 2 weeks ago, and now the printer just shows "idle"... even with a new router. (see image below)
Please help, I appreciate any support.
As a side note, the HP Service rep was very friendly, and definitely tried to support the HP Product, which is much more than I can say about Netgear.
Thank you,
This question was solved.
View Solution.

Hi,
More likely the issue related with Multicast, which Apple devices relies on to communicate with teh device through the network.
First try unplugging the router for 30 seconds.
Plug it back to the power and wait for 2-3 minutes.
Turn the HP printer Off and back On, then check for any difference.
If the same persists, try changing your router configuration as following
Note: the settings below are not related with the HP product, I provide you the steps as a best effor and those are only based on my own knowledge. you may try modifying the router settings at your own risk:
Open the router configuration page (can be found listed as the Default Gateway by clicking the Wireless icon on the printer, then print a network configuration report.
Click the Advanced tab.
Click the Setup option from the menu, then click on WAN Setup.
Make sure to uncheck the box next to Disable IGMP Proxying and Apply the changes.
Click the LAN Setup on the same Setup menu.
Set the RIP Version as RIP-2 and Apply the changes.
Reboot your router and then check for any change.
I hope you may find that information useful, you may also use the user guide below for further information:
http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.pdf
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Microsoft outlook 2010 post will not print

Similar Messages

Maybe you are looking for