Middle failed to install

Dear All,
I am trying to create Forms and Reports by using weblogic server. this is the document i have followed
"How to Install Fusion Middleware 11.1.1.1 / 11.1.1.2 Forms and Reports Only [ID 854117.1] "As per the document they installed weblogic server version 10.3.1.0 but i installed the available one from oracle support portal, that is 10.3.2, hope there wont be any trouble in this, but i have failed while i installing forms and reports which is 11.1.1.2.0. its says could not able to start the weblogic server.
Kindly let me know where i did mistake in this.
1st 11g database
2st installed weblogic server,its successfully installed (10.3.1.0 )( no other activities i done after this ,. like creating domain and all )
3rd 11.1.1.2.0 Fusion middle ware for 11g forms and reports, here only i failed
i have submitted the log file below where i found mistakes.. kindly someone help me!!!!!!!!!!
Regards
Hameed
xecuting Task: Creating Domain
XXX: adding task: oracle.as.install.classic.ca.standard.DomainProvisioningTask
AdminServer port is 7001
trying to connect to TECH3 7001
Creating Weblogic Domain.
java.lang.NoClassDefFoundError: com/bea/plateng/common/util/ObjectStoreManager
     at oracle.as.provisioning.weblogic.ASDomain._createDomain(ASDomain.java:2822)
     at oracle.as.provisioning.weblogic.ASDomain.createDomain(ASDomain.java:2469)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassNotFoundException: com.bea.plateng.common.util.ObjectStoreManager
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionClassLoader.loadClass(StandardConfigActionClassLoader.java:75)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
     ... 18 more
oracle.as.provisioning.exception.ASProvisioningException
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     ... 13 more
progress in calculate progress4
progress in calculate progress4
XXX: adding task: oracle.as.install.classic.ca.standard.DomainProvisioningTask
AdminServer port is 7001
trying to connect to TECH3 7001
Creating Weblogic Domain.
java.lang.NoClassDefFoundError: com/bea/plateng/common/util/ObjectStoreManager
     at oracle.as.provisioning.weblogic.ASDomain._createDomain(ASDomain.java:2822)
     at oracle.as.provisioning.weblogic.ASDomain.createDomain(ASDomain.java:2469)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
oracle.as.provisioning.exception.ASProvisioningException
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
     at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
     at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
     at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:688)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:393)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     ... 13 more
progress in calculate progress4
progress in calculate progress4

Dear Friend ,
I strucked again in the same procedures you said before,,
While creating Instance i am getting error "Creating A SInstance -- failed "
The log files says ..
I am not aware of this procedures,, in web logic server the forms and reports are running.. can u tell me where is the problem??
Regards
Hamid
Creating Instance Service..
AdminServer port is 7001
trying to connect to TECH3 7001
Successful
getDomainRuntimeMBeanServerConnection ...
Connecting to Domain runtime ...
trying to connect to TECH3 7001
Successfully connected to the Domain Runtime ...
trying to connect to TECH3 7001
Successful
MBean Server Connection is :javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection@1b0dd3a
TECH3 7001
weblogic.Deployer invoked with options: -adminurl TECH3:7001 -username weblogic -name NonJ2EEManagement -source D:\Oracle\Middleware\as_1\opmn\applications\NonJ2EEManagement.ear -nostage -deploy -upload -noexit
+<Oct 12, 2011 11:53:50 AM IST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, NonJ2EEManagement [archive: D:\Oracle\Middleware\as_1\opmn\applications\NonJ2EEManagement.ear], to configured targets.>+
+Task 0 initiated: [Deployer:149026]deploy application NonJ2EEManagement [Version=11.1.1] on AdminServer.+
+Task 0 failed: [Deployer:149026]deploy application NonJ2EEManagement [Version=11.1.1] on AdminServer.+
Target state: deploy failed on Server AdminServer
java.lang.NoSuchMethodError: getDeploymentOperation
java.lang.Exception: oracle.as.provisioning.exception.ASProvisioningException
+     at oracle.as.install.classic.ca.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:219)+
+     at oracle.as.install.classic.ca.standard.StandaloneTool.execute(StandaloneTool.java:50)+
+     at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)+
+     at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)+
+     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)+
+     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)+
+     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)+
+     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)+
+     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)+
+     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)+
+     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)+
+     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)+
+     at java.lang.Thread.run(Thread.java:619)+
Caused by: oracle.as.provisioning.exception.ASProvisioningException
+     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)+
+     at oracle.as.install.classic.ca.standard.InstanceProvisioningTask.doExecute(InstanceProvisioningTask.java:215)+
+     ... 12 more+
Caused by: oracle.as.provisioning.engine.CfgWorkflowException
+     at oracle.as.provisioning.engine.Engine.processEventResponse(Engine.java:596)+
+     at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:178)+
+     at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstanceAndComponents(ASInstanceProv.java:116)+
+     at oracle.as.provisioning.engine.WorkFlowExecutor._createASInstancesAndComponents(WorkFlowExecutor.java:525)+
+     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:441)+
+     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)+
+     ... 13 more+
Caused by: oracle.as.provisioning.util.ConfigException:
Error creating ASInstance asinst_1.
Cause:
An internal operation has failed: Unable to validate NonJ2EEManagement Application deployment on admin server.
Action:
See logs for more details.
+     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)+
+     at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:317)+
+     at oracle.as.provisioning.fmwadmin.ASInstanceProv.createInstance(ASInstanceProv.java:166)+
+     ... 17 more+
Caused by: oracle.as.config.ProvisionException: Unable to validate NonJ2EEManagement Application deployment on admin server.
+     at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:678)+
+     at oracle.as.config.impl.RuntimeServiceConnection.deployIfNecessary(RuntimeServiceConnection.java:192)+
+     at oracle.as.config.impl.OracleASInstanceImpl.create(OracleASInstanceImpl.java:92)+
+     at oracle.as.provisioning.fmwadmin.ASInstanceProv._createInstance(ASInstanceProv.java:249)+
+     ... 18 more+
Caused by: oracle.as.config.utl.DeployerException: NonJ2EEManagement Applicationdeployment failed.
+     at oracle.as.config.utl.Deployer.deployApplication(Deployer.java:95)+
+     at oracle.as.config.utl.Deployer.deploy(Deployer.java:52)+
+     at oracle.as.config.impl.RuntimeServiceConnection.deployNonj2eeApplication(RuntimeServiceConnection.java:219)+
+     at oracle.as.config.impl.RuntimeServiceConnection.validateNonj2eeApplication(RuntimeServiceConnection.java:670)+
+     ... 21 more+
Caused by: java.lang.reflect.InvocationTargetException
+     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)+
+     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)+
+     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)+
+     at java.lang.reflect.Method.invoke(Method.java:597)+
+     at oracle.as.config.utl.Deployer.deployApplication(Deployer.java:93)+
+     ... 24 more+
+Caused by: weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application NonJ2EEManagement [Version=11.1.1] on AdminServer.+
Target state: deploy failed on Server AdminServer
java.lang.NoSuchMethodError: getDeploymentOperation
+     at weblogic.Deployer.run(Deployer.java:72)+
+     ... 29 more+
+Caused by: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application NonJ2EEManagement [Version=11.1.1] on AdminServer.+
Target state: deploy failed on Server AdminServer
java.lang.NoSuchMethodError: getDeploymentOperation
+     at weblogic.deploy.api.tools.deployer.Jsr88Operation.report(Jsr88Operation.java:541)+
+     at weblogic.deploy.api.tools.deployer.Deployer.perform(Deployer.java:140)+
+     at weblogic.deploy.api.tools.deployer.Deployer.runBody(Deployer.java:88)+
+     at weblogic.utils.compiler.Tool.run(Tool.java:158)+
+     at weblogic.utils.compiler.Tool.run(Tool.java:115)+
+     at weblogic.Deployer.run(Deployer.java:70)+
+     ... 29 more+
progress in calculate progress4
progress in calculate progress4

Similar Messages

Flash fails to install on vista

I'm getting so frustrated. I have tried eveything to download version 10 of the flash player and nothing seems to work. In the middle of downloading I get the error box that says it has failed to install. I've uninstalled, re-installed, reset the computer, turn it on safe mode. even the registry thing that run in the black box says windows does not recognize command and that didn't work either. What am I doing wrong?Am I stupid or something?

Ok, ok - calm down...
First thing you should try
Turn off User Account Control within the Control Panel, then try the install again.
If this works, turn UAC back on after successful installation.
If it does not work, please post back with more information, i.e. what browser you are trying to install it in.
P.S. I don't understand the "registry thing"; can you point me to where you found that?

"Failed to Install App"

When i try to sync any app. The transfer starts but somewhere during the middle of transfer the process fails and i get a message on my iphone "Failed
to install ___ app" and there is space available on the iphone. What should i do? Any help would be appreciated.

Muhammad ~ Welcome to the Support Communities. This is just a tip...
You can edit your post within 15 minutes. To edit your initial post of a thread, click on the Edit post link in the Actions section at upper right. To edit your subsequent posts of a thread, click on the Edit link at the bottom of the particular post you want to edit. Either way, when done editing, click the blue Update button.

10.6.2 failed to install due to 'nfs error', audio no longer works

macbook pro, all other updates have installed just fine, except for 10.6.2
I get this in the log:
11/10/09 3:58:15 PM com.apple.kextcache410 Created mkext archive //System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext.
11/10/09 3:58:15 PM com.apple.kextcache403 Failed to mount helper partition: error 0XF8DA000C (DA err# 0x0c).
11/10/09 3:58:15 PM com.apple.kextd10 kextcache error while updating / (error count: 4)
11/10/09 3:58:15 PM com.apple.kextcache403 /: trouble updating one or more helper partitions.
11/10/09 3:58:15 PM com.apple.kextd10 async child pid 403 exited with status 70
11/10/09 3:58:15 PM com.apple.kextd10 kextcache error while updating / (error count: 5)
11/10/09 3:58:15 PM installd376 PackageKit: Install Failed: (null)
Error Domain=PKInstallErrorDomain Code=121 UserInfo=0x104d22740 "An error occurred while updating system extension information." Underlying Error=(Error Domain=NSPOSIXErrorDomain Code=70 "The operation couldn’t be completed. Stale NFS file handle") {
NSLocalizedDescription = "An error occurred while updating system extension information.";
NSUnderlyingError = "Error Domain=NSPOSIXErrorDomain Code=70 \"The operation couldn\U2019t be completed. Stale NFS file handle\"";
arguments = (
"-update-volume",
nothing is mounted (i rebooted before applying). not sure why it's giving that NFS error. it's consistent tho.. if i reboot and try the manual install of the patch, I get the same error.
after the failed patch "installed" it left my sound not working... so far everything else appears to work. any thoughts on fixing this are appreciated. i ran diskutil and 'fixed perms' and 'verified disk' ... patch still fails.

Try reinstalling the patch. If you get all the way through the installation, then see if your sound works. If not, then I suggest you do a repair install of Sno by installing Sno over Sno as in an upgrade install. Such an install, while usually very safe, still is an install so be appropriated backed up if you proceed.

Failed to install Creative Cloud desktop error code 1 Windows 8.1

I just recently tried to begin a trial of creative cloud in order to get access to photoshop. I really need photoshop for my school because of how powerful it is and the tools is offers. A couple weeks ago I tried to download and install creative cloud for windows 8 64-bit, and the download begins, but once it reaches around 50%, it raises an error message saying "We've encountered the following issues: Creative Cloud desktop failed to install (error code 1)". I was having problems with the internet at the time so I just naturally assumed it was the cause. So I went ahead and gave it a couple of days before I tried again. When I tried again I received the same error message at the same time. I continued to look around for a solution and trying it everyday but I have had absolutely no luck with it, and honestly am getting quite frustrated with it. I have looked everywhere for a solution, I tried the adobe clenup tool, I have checked to make sure I don't have any previous versions of adobe products on my computer, and even tried installing it as an admin in safe mode, and still nothing. I have no idea what to do next, but I know that I have to get ahold of photoshop, one way or another, and it must have the professional tools included in the creative cloud edition. Please tell me there is a simple solution and I have been blind this entire time. If there is no solution, can someone direct me to another software similar to photoshop that has access to the plug-in dDo? (I am in game development and have heard how powerful dDo is and have been dying to use it. I have also been anxious to get photoshop, but it doesn't appear to be possible without the creative cloud desktop app).

Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/

HP C1680 fails to install Software

Can you please help
I have just reinstalled my operating system Windows 7 6- bit OS and needed to reinstall my printer HP Photosmart C6180 All in One. When I first got my new PC( Dell XPS 501L windows 7 Intel core i5. 243M 2.40GHz) I originally install the whole package with no issues.
after the reinstall of the OS, this is issue I was I getting when I tried to reinstalled the HP application (AIO_CDA_FSW_Full_Win_WW_130_140.exe )
Error message:-
C:\Users\andylouey\AppData\Local\Temp\7zS4864\setup\HPzPNP.ice.
I have done the following:
Tried to install from an old download of the software. Result Failed to install message as above.
Tried the original install CD and also tried to use them in various compatibility modes. Result Failed.
Downloaded the critical updates from HP solved the above error message result the above error message was solved.
Downloaded the latest install software program for my HP printer from the HP website tried again to install failed
Ran the HP Scan doctor reported that the printer drivers are all working asked it to run the scan program it reported that it need the full install of the C1680 software to run this
I got the download again ran it. It extracts the file then just disappears and looking at the task manager there is not install running. So again failed
For the second time I downloaded the HP installer network printer wizard but this failed and just keeps going round in circles> It finishes the download gets to the extracting point and then goes back to the identify printer( which is listed) then goes back once again and downloads the install software.
Other steps I have taken. I used the old installation disk to do a complete uninstall of all the drivers and software using Utilities> CCC> Uninstall_ L2.bat . This wored and uninstalled the printer and drivers and I think any remaining software. I also deleted all the %TEMP% files that my Laptop would allow.
Then once again I I used the install wizard first without the USB cable disconnected then the wizard asked me to plug it in. I plugged it in and HP Wizard found the printer and downloaded the appropriate software completed the download and extracted it and then NOTHING.
I have also downloaded the critical update:-
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-126392-2&cc=uk&dlc=en&lc=en...
Can you suggest a solution help. In my view I need to start from scratch and remove all traces of any HP software and drivers and start over. My only issue with this I have done this and still have the same issues. If I go to Microsoft uninstall utility there isn’t anything to uninstall.
Thanks in advance for your reply.
PS. HP wizard has finished downloading for the fourth time and looping to discovering the device again :-( HELP!!!!!!!!
Thanks in adbance for your replies Andy

Hi
Thank you for your reply and your advice and help
If you look at my help request aboveI have described that I have done your suggetion and yet there are still traces of HP on my hard drive and I am still haveing the same issues.
Below are the steps you have referred to which I covered in my original request :-
Other steps I have taken. I used the old installation disk to do a complete uninstall of all the drivers using CCC> Utilities and Uninstall_L3 . I also deleted all the %TEMP% files (7z) that my Laptop would allow.
Then once again I I used the install wizard first wit the USB cable disconnected then the wizard asked me to plug it in. I plugged it in and HP Wizard found the printer and downloaded the appropriate software completed the download and extracted it and then NOTHING. Except the drivers were installed and the printer was shown in the devices and printers.
I have also downloaded the critical update:-
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-126392-2&cc=uk&dlc=en&lc=en...
Can you suggest a solution help. In my view I need to start from scratch and remove all traces of any HP software and drivers and start over. My only issue with this I have done this and still have the same issues. If I go to Microsoft uninstall utility there isn’t anything to uninstall.
I can print to the printer both wirelessly and via the USB port. But the Solution center will not install just keeps looping. ie idenifies the printer downloads the latest sofware and extracts it then just dissapears of the screen. Nothing comes up and there are no HP programs running in the applications task manager and no processes either.
Thank you in advance for your reply. Regards Andy

Kb2920189 fails to install on Windows 2012 R2 Essentials

Hello,
I have a 2012 R2 Essentials server that fails to install the UEFI KB2920189 update. All other updates installed fine. It's running two disks, one has 8.1 the other has 2012 R2 Esssentials in dual boot mode. No VM. I have heard reports
of successful installs of this kb2920189 update that basically bricks the OS on reboot. I would like to avoid this. The error code during the failed installation is 800F0922.
Thanks

Hi,
Based on your description, I understand that you failed to install KB2920189 with error 800F0922.
Please refer to following operations and check if can help you to solve this issue.
Refer to the KB (KB947821), and use the inbox Deployment Image Servicing and Management (DISM) tool. Then install
this update again.
Please
reset Windows Update components and monitor the result.
Please perform a
clean boot and check if you can install this update successfully.
If this issue still persists, please navigate to: %windir%\Windowsupdate.log and check the log file if can
find some more clues.
For more details, please refer to the following KB.
How to read the Windowsupdate.log file
Hope this helps.
Best regards,
Justin Gu

Fail to install Distibution Point on Windows Server 2012

I have been trying to install a distribution point via sccm 2012 on a windows 2012 server. I keep getting errors about the drive not found (distribution manager failed to verify drive specified by user on distribution point) and it won't install. It worked
on all the other servers I tried, but this one keeps giving trouble.
Does anyone have any idea as to the cause?
I put an extract of the log file here:
Get site system FQDN and account information from DB for ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:18 5848 (0x16D8)
Get site system FQDN and account information from DB for ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:19 5848 (0x16D8)
Failed to get SMS_DistributionPoint object SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:20 5848 (0x16D8)
DPConnection::Connect: For ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\, logged-on as SESVANDERHAVE\svc_scom_msaa SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:32 3724 (0x0E8C)
ConfigureDP SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:32 3724 (0x0E8C)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:44 1724 (0x06BC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:49 1724 (0x06BC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:56:54 1724 (0x06BC)
DP registry settings have been successfully updated on HUSOWINFP01.sesvanderhave.net SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:05 3724 (0x0E8C)
STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=3724 GMTDATE=di dec 31 12:57:05.905 2013 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 31/12/2013
13:57:05 3724 (0x0E8C)
STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=3724 GMTDATE=di dec 31 12:57:05.905 2013 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 31/12/2013
13:57:05 3724 (0x0E8C)
ConfigurePXE SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:05 3724 (0x0E8C)
Failed to get SMS_DistributionPoint object SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:07 3724 (0x0E8C)
CDistributionManager::ConfigurePXE failed; 0x80041002 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:07 3724 (0x0E8C)
No need to initialize monitoring task on HUSOWINFP01.sesvanderhave.net SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:16 3724 (0x0E8C)
Creating, reading or updating IIS registry key for a distribution point. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
IISPortsList in the SCF is "80". SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
IISSSLPortsList in the SCF is "443". SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
IISWebSiteName in the SCF is "". SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
IISSSLState in the SCF is 224. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:18 5848 (0x16D8)
DP settings have been updated to HUSOWINFP01.sesvanderhave.net. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:21 3724 (0x0E8C)
DPConnection::Disconnect: Revert to self SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:22 3724 (0x0E8C)
Sleep 1231 seconds... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:22 3724 (0x0E8C)
Failed to get SMS_DistributionPoint object SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:22 5848 (0x16D8)
Found notification for package 'SES00003' SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Found notification for package 'SES00004' SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Package Thread Limit: 3 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Retry interval: 30 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
DP upgrade thread Limit: 5 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
DP upgrade retry interval: 20 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Starting package processing thread, thread ID = 0x2274 (8820) SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:32 3724 (0x0E8C)
Starting package processing thread, thread ID = 0x9B8 (2488) SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 3724 (0x0E8C)
Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 3724 (0x0E8C)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=8820 GMTDATE=di dec 31 12:57:33.112 2013 ISTR0="SES00003" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00003" SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 8820 (0x2274)
Retrying package SES00003 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 8820 (0x2274)
No action specified for the package SES00003. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 8820 (0x2274)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=2488 GMTDATE=di dec 31 12:57:33.112 2013 ISTR0="SES00004" ISTR1="" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00004" SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 2488 (0x09B8)
Retrying package SES00004 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 2488 (0x09B8)
No action specified for the package SES00004. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:33 2488 (0x09B8)
Start adding package to server ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
Start adding package to server ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\... SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 7936 (0x1F00)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 3404 (0x0D4C)
The distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ is not installed or upgraded yet. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 7936 (0x1F00)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 7936 (0x1F00)
The distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ is not installed or upgraded yet. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 3404 (0x0D4C)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 3404 (0x0D4C)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
Thread Handle = 00000000000031DC SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
DP thread with thread handle 00000000000031DC and thread ID 7936 ended. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 8820 (0x2274)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
Thread Handle = 00000000000016A8 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
DP thread with thread handle 00000000000016A8 and thread ID 3404 ended. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:35 2488 (0x09B8)
Package SES00003 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
The package and/or program properties for package SES00003 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=SES00003, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
Package SES00004 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
The package and/or program properties for package SES00004 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=SES00004, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
StoredPkgVersion (1) of package SES00003. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
SourceVersion (1) of package SES00003. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=8820 GMTDATE=di dec 31 12:57:36.247 2013 ISTR0="Configuration Manager Client Package" ISTR1="SES00003"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00003" SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820
(0x2274)
Failed to process package SES00003 after 1 retries, will retry 99 more times SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 8820 (0x2274)
StoredPkgVersion (1) of package SES00004. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
SourceVersion (1) of package SES00004. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=8216 TID=2488 GMTDATE=di dec 31 12:57:36.282 2013 ISTR0="Configuration Manager Client Upgrade Package"
ISTR1="SES00004" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00004" SMS_DISTRIBUTION_MANAGER 31/12/2013
13:57:36 2488 (0x09B8)
Failed to process package SES00004 after 1 retries, will retry 99 more times SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 31/12/2013 13:57:36 2488 (0x09B8)

I uninstalled the WDS according to the information on this site: http://myitforum.com/myitforumwp/2011/11/08/configmgr-2012-no-need-to-manually-install-wds/
But it still keeps giving me errors about the disk not being valid, it does that wether I choose a disk or leave the default values.
DPConnection::Connect: For ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\, logged-on as SESVANDERHAVE\svc_scom_msaa SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:33 2964 (0x0B94)
ConfigureDP SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:33 2964 (0x0B94)
Upgrading DP with ID 16777238. Thread 0x1bdc. Used 1 threads out of 5. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:50 7492 (0x1D44)
Processing 16777238.INS SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:50 7132 (0x1BDC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:50 7492 (0x1D44)
DPID 16777238 - NAL Path ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ , ServerName = HUSOWINFP01.SESVANDERHAVE.NET, DPDrive = D:, IsMulticast = 0, PXE = 1, RemoveWDS = 0 SMS_DISTRIBUTION_MANAGER 6/01/2014
8:49:50 7132 (0x1BDC)
Created policy provider trigger for ID 16777238 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:50 7692 (0x1E0C)
DPConnection::Connect: For ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\, logged-on as SESVANDERHAVE\******** SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:54 7132 (0x1BDC)
Failed to find a valid drive on the distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:55 7132 (0x1BDC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:55 7492 (0x1D44)
DPConnection::Disconnect: Revert to self SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:56 7132 (0x1BDC)
Failed to install DP files on the remote DP. Error code = 15 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:56 7132 (0x1BDC)
Drive D: is not valid. Error = 15 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:56 7132 (0x1BDC)
STATMSG: ID=2360 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=7132 GMTDATE=ma jan 06 07:49:56.907 2014 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="HUSOWINFP01.SESVANDERHAVE.NET" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 6/01/2014
8:49:56 7132 (0x1BDC)
Will try again after 20 mins ... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:56 7132 (0x1BDC)
DP registry settings have been successfully updated on HUSOWINFP01.sesvanderhave.net SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964 (0x0B94)
STATMSG: ID=9500 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=2964 GMTDATE=ma jan 06 07:49:58.295 2014 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964
(0x0B94)
STATMSG: ID=9503 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=2964 GMTDATE=ma jan 06 07:49:58.295 2014 ISTR0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\"
ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=404 AVAL0="["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964
(0x0B94)
ConfigurePXE SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964 (0x0B94)
Failed to get SMS_DistributionPoint object SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964 (0x0B94)
CDistributionManager::ConfigurePXE failed; 0x80041002 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:49:58 2964 (0x0B94)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:00 7492 (0x1D44)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:05 7492 (0x1D44)
Initialize monitoring task on HUSOWINFP01.sesvanderhave.net SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:16 2964 (0x0B94)
Failed to get object class SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:16 2964 (0x0B94)
ExecStaticMethod failed (80041002) SMS_DistributionPoint, RegisterDPHealthMonTask SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:16 2964 (0x0B94)
Failed to register DP health monitoring task on HUSOWINFP01.sesvanderhave.net. error = 0x80041002 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:16 2964 (0x0B94)
DP settings have been updated to HUSOWINFP01.sesvanderhave.net. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:21 2964 (0x0B94)
DPConnection::Disconnect: Revert to self SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:21 2964 (0x0B94)
Sleep 60 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:21 2964 (0x0B94)
Found notification for package 'SES00003' SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Found notification for package 'SES00004' SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Package Thread Limit: 3 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Retry interval: 30 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
DP upgrade thread Limit: 5 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
DP upgrade retry interval: 20 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Starting package processing thread, thread ID = 0x12CC (4812) SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:31 2964 (0x0B94)
Starting package processing thread, thread ID = 0xDD8 (3544) SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 2964 (0x0B94)
Sleep 3600 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 2964 (0x0B94)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=4812 GMTDATE=ma jan 06 07:50:32.429 2014 ISTR0="SES00003" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00003" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 4812 (0x12CC)
Retrying package SES00003 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 4812 (0x12CC)
No action specified for the package SES00003. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 4812 (0x12CC)
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=3544 GMTDATE=ma jan 06 07:50:32.475 2014 ISTR0="SES00004" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00004" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 3544 (0x0DD8)
Retrying package SES00004 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 3544 (0x0DD8)
No action specified for the package SES00004. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:32 3544 (0x0DD8)
Start adding package to server ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 4812 (0x12CC)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 8896 (0x22C0)
The distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ is not installed or upgraded yet. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 8896 (0x22C0)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 8896 (0x22C0)
Start adding package to server ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 3544 (0x0DD8)
Attempting to add or update a package on a distribution point. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 4628 (0x1214)
The distribution point ["Display=\\HUSOWINFP01.sesvanderhave.net\"]MSWNET:["SMS_SITE=SES"]\\HUSOWINFP01.sesvanderhave.net\ is not installed or upgraded yet. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 4628 (0x1214)
Error occurred. Performing error cleanup prior to returning. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:34 4628 (0x1214)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Thread Handle = 0000000000002BE0 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
DP thread with thread handle 0000000000002BE0 and thread ID 8896 ended. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Will wait for 1 threads to end. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Thread Handle = 0000000000002CF0 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
DP thread with array index 0 ended. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
DP thread with thread handle 0000000000002CF0 and thread ID 4628 ended. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Package SES00004 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
The package and/or program properties for package SES00004 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=SES00004, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Package SES00003 does not have a preferred sender. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
The package and/or program properties for package SES00003 have not changed, need to determine which site(s) need updated package info. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=SES00003, Version=1, Status=2301 SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
StoredPkgVersion (1) of package SES00004. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
SourceVersion (1) of package SES00004. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=3544 GMTDATE=ma jan 06 07:50:35.736 2014 ISTR0="Configuration Manager Client Upgrade Package" ISTR1="SES00004" ISTR2=""
ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00004" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Failed to process package SES00004 after 77 retries, will retry 23 more times SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 3544 (0x0DD8)
StoredPkgVersion (1) of package SES00003. StoredPkgVersion in database is 1. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
SourceVersion (1) of package SES00003. SourceVersion in database is 1. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BEHQWINSCCM02.sesvanderhave.net SITE=SES PID=4552 TID=4812 GMTDATE=ma jan 06 07:50:35.829 2014 ISTR0="Configuration Manager Client Package" ISTR1="SES00003" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="SES00003" SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Failed to process package SES00003 after 77 retries, will retry 23 more times SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Exiting package processing thread. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:35 4812 (0x12CC)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:36 7492 (0x1D44)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:37 2964 (0x0B94)
Sleep 1828 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:37 2964 (0x0B94)
Sleep 20 minutes... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:41 7492 (0x1D44)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:42 2964 (0x0B94)
Sleep 1823 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:42 2964 (0x0B94)
Used 0 out of 3 allowed processing threads. SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:47 2964 (0x0B94)
Sleep 1818 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:47 2964 (0x0B94)
Sleep 1818 seconds... SMS_DISTRIBUTION_MANAGER 6/01/2014 8:50:47 2964 (0x0B94)

Install of CUCM 8.6.1.10000-43 on VMWare fails on installing progmeter

Hi, Everyone
First time post here, and first time installing CUCM (any version).
I built a VM using a downloaded OVA template for CUCM 6.5.1.10000-43, and the install fails with a critical stop. Once I figured out how to dump logs to the virtual serial port, and looked at the install.log, I found the following information that looks like where the install failed (these are the only LVL::Error and LVL::Critical messages in the log).
It looks like install failed to install the progmeter application component.
Does anyone know what this app does? Any ideas on why it might have failed to install and possible workaround?
I may already have the answer to the question, as I'm attempting install on a VM running on VMWare vServer (rather than ESX/ESXi/vSphere). It is possible that simply being on an unsupported configuration is my problem. I'm trying to work with the equipment immediately available to me, but fully understand that I may have set myself up for failure by even attempting this.
Any help is appreciated greatly.
Regards,
Sean C
INSTALL LOG SNIPPET
08/17/2011 17:51:51 component_install|File:/opt/cisco/install/bin/component_install:743, Function: exec_progmeter(), /opt/cisco/install/bin/progmeter failed (1)|<LVL::Error>
08/17/2011 17:51:51 appmanager.sh|Internal Error, File:/usr/local/bin/base_scripts/appmanager.sh:155, Function: install(), failed to install application components|<LVL::Critical>
08/17/2011 17:51:51 post_install|File:/opt/cisco/install/bin/post_install:869, Function: install_applications(), /usr/local/bin/base_scripts/appmanager.sh -install failed (1)|<LVL::Error>
08/17/2011 17:51:51 post_install|Exiting with result 1|<LVL::Info>
08/17/2011 17:51:51 post_install|INSTALL_TYPE="Basic Install"|<LVL::Debug>
08/17/2011 17:51:51 post_install|File:/opt/cisco/install/bin/post_install:570, Function: check_for_critical_error(), check_for_critical_error, found /common/log/install/critical.log, exiting|<LVL::Error>
08/17/2011 17:51:52 post_install|(CAPTURE) Mail notification cancelled - smtp server address for email not found! [/usr/local/platform/conf/platformConfig.xml]|<LVL::Debug>
08/17/2011 17:51:52 display_screen|Arguments: "Critical Error" "The installation has encountered a unrecoverable internal error. For further assistance report the following information to your support provider.
"/opt/cisco/install/callmanager/scripts/cm_msa_post.sh install PostInstall 8.6.1.10000-43 8.6.1.10000-43 /usr/local/cm/ /usr/local/cm/ /common/log/install/capture.txt " terminated. Exceeded max time (360)
The system will now halt.
Continuing will allow you to dump diagnostic information before halting." "Continue"|<LVL::Debug>

Hi,
Has anyone found a fix for this?
I am trying to run call manager 8.6.1 on the following enviroment
VMware ESXI 4.1
4GB of RAM
80 GB HDD Space
I have allocated the VM one CPU
In regards to vsergeyey reponse I have checked the network adapter and this is flexible.
I have run the OVA template firstly before mounting the image
I have tried installing numerous times.
Each and every time near the "Installing Database Component" I get the following error;

After an iTunes update failed to install iTunes won't open and I get lthe folloowing error messages. Program can't start because MSVCR80.dll is missing, and iTunes not installed correctly. please reinstall iTunes. Error 7( windows errpr 126)

After an iTunes update failed to install, iTunes won't open and I get the following two windows. Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) When I reinstall I get the same messages and ITunes won't open.

Click here and follow the instructions.
(98815)

Snow Leopard fails to install - Tech Support and Genius Bar can't fix it

I am having an exceedingly difficult time installing Snow Leopard. I have tried everything I can think of and tech support AND the Genius Bar have failed me so far.
The Details:
Every time I install SL it starts off well but sometime between 18 minutes remaining and 6 minutes remaining it fails. I get an error message that says there was an error that prevented installation. Looking in the installer log gives me a little more information. It usually has 15 or so errors, the last of which is always a very long line saying some package failed to install/unpack/be copied. The odd thing is that the file name is different every time.
So far I have tried:
Repairing the disk and installing
Installing from a different install DVD
Installing from external hard drive at the Genius Bar
Installing using RAM borrowed from the Genius Bar
Wiping the HD completely. I erased all my partitions and tried to install on a completely blank hard drive with a single HFS+ partition
I can only think of a few things that can cause the install to fail: DVD, optical drive, RAM, files on HDD, and HDD hardware. I think I've eliminated all those possibilities except HDD hardware. Changing that on a MacBook isn't trivial and I don't have one handy. Also I would think a HDD problem, or any hardware problem, would cause all sorts of errors and with the exception of this the machine has no serious problems and apps crash only occasionally. I've had no system crashes for as long as I can remember.
I have a Time Machine back up and have successfully restored my old Leopard System onto the MacBook (twice now) so at least I have the option to just give up on SL if I want to. As an aside, restoring from TM went well but not perfectly. Next time I install an OS I will be making a disk image backup. Does anyone else have any ideas? If you solve this problem I'll be eternally grateful and very impressed.
Thanks in advance
Jay

I'm sorry. I should have answered when you asked about RAM the first time. I have 2GB. I have tried installing with that, and I tried installing with RAM at the Genius Bar. I don't know how much the guy used at the Genius Bar.
Last night I restored from time machine so I currently have Leopard installed on the machine. After the restoration my email archive is little strange, I had to re-authorize iTunes and various other annoyances pop up but it runs without any problems.

TS1702 I have just tried to install Anthill to my iPod touch Gen 4. I get a message "Anthill failed to install" on the iPod. I already had Anthill Free installed so deleted it. I can install other free apps but not Anthill Free. Have tried the 7 steps. An

I have just tried to install the full version of Anthill to my iPod touch Gen 4. I get a message on the iPod saying "Anthill failed to install" and an error on the computer "OxE8000004". I already had Anthill Free installed so deleted it in case it was interferring with the new download. I can install other free apps but now can't even install Anthill Free. I have tried the 7 resolution steps advised by Apple and have totally run out of ideas as to what I can try next. I am using a new laptop since installing Anthill Free the first time and am now running Windows 7, otherwise everything else is the same. Any help would be sincerely appreciated. Thanks.

- Maybe here:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
- Try redownloading the app directly to the iPod by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Hi, I recently upgraded my xcode to 5.1, my project is running well in ios 7.0,6.0, But in ios 7.1 i'm getting error like"iOS Simulator failed to install the application". Can anybody please suggest the solution for it.

My project is not running in ios 7.1 simulator i'm getting error like "iOS Simulator failed to install the application". Please suggest a solution for it.

We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer s

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message - "A problem occurred extracting the archive".
Can anyone help?

Yep. Nothing happens at all. Windows tries to execute the uninstaller, but I don't get any other screen and all activity stops for the MSI. I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn't find anything or something.
It's as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the "Size" column. Now it's just blank. Link to screenshot below:
http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
Note the install date. That's when I was able to successfully reinstall it. Now I can't even do that. I should also mention I tried Revo Uninstaller. It deleted one small registry key, but nothing changed.
By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it? It refused to run unless I had one in it, so I used my install dvd.

Error Message 3 Quick Time failed to install

I have tried every way I know possible to download iTunes. I have loaded Quicktime stand alone, I have loaded iTunes to my hard drive and tried to start the install from there and not the internet. I have turned off all firewalls and virus/spyware software. I continue to get Error Message 3, Quick Time failed to install. I am very frustrated with this problem as well as the run around I'm getting from Apple. I can't even update my iPod. I thought my iPod purchase was going to be great. But after the short battery life issue and now the software issue. I am starting to re-think my purchase. Does anyone have a solution to the software problem that works??? Apple even tried to blame the problem on my computer. I see from all the people that have this problem in this forum it is not my computer. Please help if you can...Thanks, M
Toshiba Qosmio F25-AV205 Windows XP Pro Also Windows Media Center

Do you use Yahoo messenger? It's probably easier to walk you through it

Middle failed to install

Similar Messages

Maybe you are looking for