Midi Will Not Recognize My iPad For New Session

I have a Mac Mini and it's running OSX. I got a new app for my iPad2 called Ac-7 Core. I can get into the MIDI setup network and I even see my iPad listed up there. However it will not allow to me to create a new session or even connect to my ipad. If I click on my iPad's name it gets highlighted but it won't let me click CONNECT in fact it won't let me actually do anything but click on my iPad name every other button is faded out and I can't type in any of the boxes. Did I just pay for an app I can't use or is there a way to fix this?

Are you trying to do this using iTunes?

Similar Messages

  • TS1538 Itunes will not recognize my ipad 1 anymore. Did everything it told me to check and still will not recognize it.

    my itunes will not recognize my ipad anymore. Did everything it told me too. What can I do now.

    Have you tried here >  http://support.apple.com/kb/TS1538
    If so...
    Try a Restart of your Computer and this Reset for the iPad...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons..

  • My computer will not recognize my Ipad as a music device, only as a camera

    My computer will not recognize my Ipad as a music device, only as a camera.  When I connect the cable from my Ipad to my computer, only options that appear are for camera and photos.  Thanks.

    That's Windows.

  • ITunes will not recognize my iPad or iPhone.

    iTunes will not recognize my iPad or my iPhone.  However, it will recognize several older iPods.  I am working in Windows 8.  Help.  I have tried everything I could find and even uninstalled and reinstalled iTunes. 
    I really think that my PC is not recognizing these correctly.  When I plug in my iPad it opens directly as an external storage device.  This was working properly a week ago.  What happened? 

    Everytime I try i get an error message that states that itunes has been installed incorrectly.
    What's the precise text of that message, please? (There's a few different ones I can think of that you might be getting.)

  • Safari will not open on iPad for over 24 hr. Internet is working.

    Safari will not open on iPad for over 24 hrs. Internet is working. Laptops are working. Ipad has been perfect until now.

    Reset: hold down the home button along with the power button until you see the Apple, then let go.

  • If I disconnect and connect the session which was currently working will not be avialable but a new session starts.

    Hi
    RDP connection over server 2008 R2 standard, if I disconnect and connect the session, which was currently working  will not be avialable but  a new session starts.
    what features should I add and how to configure so that if connection is lost the user should see the same session when they connect back.
    kind Regards,
    Jayanth

    Hi,
    Please enable this policy and try again.
    Restrict Users to a Single Session
    http://technet.microsoft.com/en-us/library/cc754762.aspx
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • After updating to new version of iTunes my PCM will not recognize my ipad

    After updating to the new version of iTunes why will it not recognize my iPad or iPod?

    Did you enable the Sidebar?
    Ctrl + S

  • ITunes 11.1.4 will not recognize iPhone, iPad after Dell BIOS update

    I suspect the problems everyone is having are related to the BIOS.  I am running a Dell XPS i7-3770 CPU @ 3.40 GHz 3.4 GHz with 24 GB RAM, 64 bit OS x64 based processor.  OS is Windows 8.1
    I just updated my BIOS as suggested by Dell.  Now iTunes 11.1.4 will not recognize my iPhone or iPad.
    My computer accesses the iPhone or iPad, but iTunes does not recognize them.
    This was not a problem prior to updating BIOS.
    Is there a fix or patch?
    I have to sync my devices for work.
    Please no baby-steps replies.  Have tried everything including removing devices from device manager and reconnecting to force driver update and try to force iTunes recognition.  None of that works.
    Thanks!

    Here is the fix from Waldo-E3 elsewhere in this forum.
    Like I said, no baby steps answers please!
    Kudos to Waldo-E3!
      RESOLVED...
    Found these steps posted elsewhere by another and the solution worked for me...
    1. Go to Windows 8.1 Control Panel. 
    2. Go to Hardware and Sound; Devices and Printers; Unspecified (look for Apple Mobile Device USB Driver) 
    3. Right-click, then select properties on the menu list. 
    4. Select the "Hardware" tab at the top  When the properties dialog box opens, once more select properties on the lower right hand button. 
    5. Under the "Driver" tab menu, the update driver button will be grey and unselectable here. So you need to select and click "Change Settings" button located near the lower left corner. 
    6. Now you can click the "Driver" tab menu near the top, so you can see the "Update Driver" button. 
    7. Select "Update Driver". 
    8. Select and click "Browse my computer for driver software". 
    9. For Windows 8.1 64 bit, it should be located in the folder: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.   
    10. Click Next, and let the driver re-install. 
    11. iTunes  11.1.4.62 should open automatically if your iphone is connected already

  • ITunes 11 wifi sync will not recognize my iPad 2 and iPhone 4 running iOS 6

    Since I upgraded to iTunes 11, iTunes no longer recognizes my iPad 2 and iPhone 4 (both running iOS 6.0.1) as active devices for the purposes of wifi sync.  It does, however, recognize my iPad 1 running iOS 5.  The only way I can sync my iPad 2 or iPhone 4 is to attach the USB cable. 
    The older version of iTunes 10 started exhibiting this behavior when iOS 6 was released, but I was able to get iTunes to recognize the devices by powering them off and then back on.
    Is anyone else experiencing this issue?  Some advice from Apple would be appreciated.

    Guys, I just performed the Itunes update and experienced the same (honestly I was expecting it),
    My sollution was, clear up caches on both iPad 2 and  iTunes.
    Exactly what I did was the following:
    1. Update iTunes.
    2. Deactivate the home sharing on iTunes.
    3. Disconect iPad from home sharing.
    4. On iTunes>Preferences>Devices "Allow" the automatic sync for iPod, iPhone & iPad
    5. Click on the button labeled "restart synchronization historical" (sorry, don't know how the button looks in English, mine is in Spanish)
    6. Click Ok
    7. To clear up iPad's caché I force reset the device by pressing and hold both buttons on the device (front and top)
    8. Activate the home sharing on both devices again and voilá... there is my full blues collection again!
    Maybe for some people it will work this way just fine and for others by doing in a different order, after all for what I see is a caché issue.
    Let me know if it was of any help, I'm more PC than mac but network issues are the same and I'm more than glad to help and learn any time.

  • My iPhone will not recognize other iPhones for iMessage after updating to ios 6.  Any suggestions?

    I updated my phone last week and after the update was finished I noticed I could not initiate an iMessage conversation with other iPhone users who I had always been able to use iMessage with.  If I begin the conversation it sends as a regular SMS message and after the other iPhone user responds it allows me to use iMessage.  I have toggled the iMessage switch on and off, signed out and back in on my apple I.D., as well as resorting to restoring my phone, still nothing.  Is anyone else experiencing this issue?

    What happens when you try?
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Will not recognize DVDs, including the new OS X Snow Leopard install disk

    I just got a used, year-old Macbook Pro and it will not read DVDs and was brought to my attention when I tried to install the new OS X 10.6 and it would make noises like it was trying to read the disk, and then it ejects the disk every time I try. I tried multiple DVDs and it did the same **** for everything I put in. It reads CDs completely fine and even burns CDs but for some reason it does not read DVDs. Any suggestions are very helpful.

    Not recognizing / mounting discs: I used to think this was a cleaning issue, and found myself removing my optical drives, taking them apart, and cleaning the lenses, etc. whenever the problem occurred. Then one time decided to simply disconnect the drives, restarting the system with the drives disconnected, then shutting down, reconnecting the drives, and restarting... bam. Drives were good to go, the problem fixed- discs mounting just fine. Apparently it wasn't the "cleaning" I was doing, it was the disconnect / reconnect that was fixing it. I don't bother cleaning them any more. Now I just do the disconnect/reconnect dance. I would consider this as being something related to the SMC, except the same issue existed with my G5, which did not utilize the SMC function as with the Intel machines.

  • Itunes will not recognize my ipad mini please help.

    I am trying to sinc music from itunes to my Ipad and my PC will not even recognize my Ipad.

    Device not recognized
    http://support.apple.com/kb/TS1538

  • I just recently updated my itunes to latest version and also updated to ios5.  Now itunes will not recognize my ipad.  What do I do now?  I tried to backup to itunes and icloud but it won't recognize the ipad.

    After updating itunes to latest version and ios5, my itunes will no longer recognize my ipad.  I tried to restore from backup on itunes and icloud without success.  Help!!

    http://support.apple.com/kb/TS3274 check this first

  • FF 21.0 Does not recognize Quicktime Plugin for new users

    Running OSX 10.8.3 on a late 2012 27" iMac. For some reason FF will not load the Quicktime plugin for a newly created user. It fails on two different iMacs and both OSX 10.8.3 and OSX 10.7.5. It does load the plugin for users that were created before FF 21.0 was installed. A very strange problem.

    There has been a change in where Firefox searches for plugins and the plugins folder in the Firefox program folder is no longer scanned for plugins, so Firefox won't find them anymore if they are installed in the plugins folder instead of the "browser\plugins" folder that Firefox now scans.
    You can set the plugins.load_appdir_plugins pref to true on the about:config page to make Firefox scan the "<install>/plugins/" directory for plugins like the WMP plugin (np-mswmp.dll).
    You can alternatively move plugins from "<install directory>\plugins\" to "<install directory>\browser\plugins\" to make Firefox find them again.
    *http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/
    *http://mike.kaply.com/2013/04/24/major-changes-coming-in-firefox-21/

  • Firefox claims that it is already running and will not let me start a new session after closing out

    I've been having this problem intermittently on both my Dell XPS 8000 and my HP nx7400 laptop. The Dell is running the latest version of Windows 7 Pro and the HP is running XP Pro (fully updated). After closing out of a Firefox session and running other apps, Firefox will not let me initiate another session, saying that "Firefox is already running... Please close the session..." That's not an exact quote, but you get the idea. CTRL-ALT-DEL and all other conventional means don't work and I am forced to reboot the system. This is a royal pain.. and I need some pain relief! Any suggestions? I may revert to an earlier version of Firefox until I see a solution... can't hurt, but I really like 4.0 and I don't look at going backwards as "progress."
    Thanks.
    Tom

    Sounds like it is hanging when you exit and later try to restart Firefox.
    * How to stop the running Firefox process
    ** In Task Manager, does firefox.exe show in the '''<u>Processes</u>''' tab?
    ** See: http://kb.mozillazine.org/Kill_application
    **Windows 7 users: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
    * What may cause Firefox to hang at exit
    **Windows 7 Task Manager: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
    ** http://support.mozilla.com/en-US/kb/Firefox+hangs
    ** http://kb.mozillazine.org/Firefox_hangs
    ** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
    * You may need to try Firefox Safe Mode
    ** You may need to use '''Safe Mode''' to locate the problem:
    ***See: http://kb.mozillazine.org/Safe_Mode
    ***Firefox 4 users, hold the Shift key while clicking the Firefox 4 desktop icon to enter Safe Mode.
    ***Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox.
    ****In Firefox 4, Safe Mode also disables Plugins and Hardware Acceleration.
    ****If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''<u>before</u>''' starting Safe Mode (In Firefox 4, Tools > Add-ons > Appearance). See: http://support.mozilla.com/en-US/kb/Using%20themes%20with%20Firefox#w_managing-themes-and-personas
    ****When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode".
    ****Test to see if the problem you are experiencing is corrected.
    *** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it
    ***#by enabling '''<u>one at a time</u>''' until the problem reappears.
    ***#You can also enable a few at a time (3-5), keeping track of what you just re-enabled to see if the problem re-occurs; this will help narrow down the possibilities if you have a large number of add-ons.
    ***#'''<u>You MUST close and restart Firefox after EACH change</u>''' via File > Restart Firefox (on Mac: Firefox > Quit).
    ***#You can use "Disable all add-ons" on the Safe Mode start window.
    **See the following for more information
    *** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
    *** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
    *** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting
    <br />
    <br />
    '''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
    *Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
    #'''''Check your plugin versions''''' on either of the following links':
    #*http://www.mozilla.com/en-US/plugincheck/
    #*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #*There are plugin specific testing links available from this page:
    #**http://kb.mozillazine.org/Testing_plugins
    #'''Update the [[Java]] plugin''' to the latest version.
    #*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
    #**'''''Be sure to <u>un-check the Yahoo Toolbar</u> option during the install if you do not want it installed.
    #*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
    #* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
    #* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
    #*Java Test: http://www.java.com/en/download/help/testvm.xml

Maybe you are looking for