Migrate Physical NW6.5 to VM ESXI with Portlock

I am looking to consolidate my windows and Netware servers on one box
running VMware ESXI. Does anyone have experience moving physical to virtual
using Portlock. They claim to make it simple as pie. Will the source
server stay up and running? Will Netware automatically reconfigure for the
new machine? The server hardware boxes are matching. Running NW6.5 sp5
Thanks

Thanks, I give a try once the new server comes (old one really bought on
ebay) I'll sell once the process is done
"Haitch" <[email protected]> wrote in message
news:uTPBl.11899$[email protected]. .
> BEATLE,
>
> > I am looking to consolidate my windows and Netware servers on one box
> > running VMware ESXI. Does anyone have experience moving physical to
virtual
> > using Portlock.
>
> Done it to ESX a couple of times - works as advertised.
>
> > They claim to make it simple as pie. Will the source
> > server stay up and running?
>
> The server will still be running - you need to shut it down before
> bringing up the Virtual.
>
> > Will Netware automatically reconfigure for the
> > new machine?
>
> No - you need to change the NIC and storage driver.
>
> > The server hardware boxes are matching. Running NW6.5 sp5
>
> The virtualised VM presents different hardware than the underlying
> physical hardware - so you need to swap the drivers.
>
> I'd also recommend updating the servers to SP8
>
> H.

Similar Messages

After Migrating from 10g to 11g Geeting problems with Guided navigations.

After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.

Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;"

EBS 11.5.10.2 with bd 9.2.0.8.0 on AIX 5.3 migration to EBS 11.5.10.2 with bd 10g or 11gR2 on AIX 6.1 Path

hello,
I wonder to know what is the path that can I choose to migrate the EBS 11.5.10.2 with bd 9.2.0.8.0 on AIX 5.3 to EBS 11.5.10.2 with bd 11gR2 on AIX 6.1.
According to the certification form in the Oracle support, EBS 11.5.10.2 is not certified with 9.2.0.8.0 database on AIX 6.1,
So must I start by migrating the database first to 10g/11g on aix 5.3 (with it's different patches and pre-requisites) and then migrate the OS to IBM AIX 6.1 with the right release TL4 SP2.
Or
I must start by migrating the OS to AIX 6.1 to have every thing running on AIX 6.1 and then migrate the database to 10g/11g and it's different patches and pre-requisites ?
Thank you for any help.

I have an other question
- in the metalink doc ID : (Note 883202.1) [ID 1271621.1]
Do I Have to do the steps :
- ATG Rollup Patch
- JAVA
- products patches
before or after cloning on AIX 6.1 ?
Thanks

Monitoring Hardware Status HP ESXi with HP SIM, Get information by SNMP

Hi.
Check out to tring this steps http://h30507.www3.hp.com/t5/Technical-Support-Services-Blog/6-Simple-Steps-to-Monitoring-ESXi-with-...
It's ok, I having health hardware status for the server in the HP SIM 7.3 by wbem with Custom HP Image ESXi 5.5 onboard by wbem .
Did any solution to get health status from hp server ESXi or from HP SIM 7.3 by SNMP to another monitoring software?

Have now solved it myself:
1) Create system restore point
2) Uninstall mobile broadband driver and centrino ultimate-N in device manager, but keep files
3) Reboot
4) Lenovo access connections automatically connects to mobile broadband. It's then just a matter of going in there and connecting to wifi also.
Everything is working beautifully now, and switching between wifi and mobile automatically. I think it was just corrupted TCP/IP settings in one or both adaptors.
X230, Core i7, 16GB memory, 512GB Samsung 830 SSD

I had to put my computer by together without migration or time machine I NEED help with order of the files?

I had to put my computer by together without migration or time machine I NEED help with order of the files?

Hi, where are these other files exactly?

CF8 Enterprise migration to another hosting provider. Help with migration plan (license) needed

Hi there!
We are running a CF8 Enterpsise on an older root Server (virtuozzo VM) and we need to switch to another provider (vmWare VM).
We will probably need more then one month for the migration and I need to come up with a migration plan that doesn't involve rendering the service unavailable.
I've tried to contact Adobe hotline, but the people there knew nothing about licensing, the other number I got from them kicks me after 20 minutes on hold... so I was hoping to be able to find answers here.
I understand CF Enterprise is licensed for 2 CPUs, for unlimited number of virtual machines, so the other server wouldn't qualify to run on the same license key because it's different 2 CPUs. If I could migrate everything within a month then I could use the 30 day demo license, but I will need more then 30 days.
So what are my options? Even if I wanted to buy CF8 Standard to cover the second server while migrating (am not really willing to pay $$$ just to cover few weeks of migration), I'm not sure I'd be able to find a place to buy it. CF9 or CF10 is not an option because we'd need to rewrite the code. What happenes if we do use same license key for few days on both servers - does it stop working? Any hope of me contacting Adobe and getting some kind of "extension" of the 30 day demo license so we can complete the migration?
Any ideas what I can to?
TIA

When you install WS2012R2 on KMS02, you can add the VA role (or you can add it after initial Windows installation), this gives you KMShost and also VAMT.
http://technet.microsoft.com/en-au/library/dn613834.aspx
http://blogs.technet.com/b/askcore/archive/2013/03/14/installing-volume-activation-services-role-in-windows-server-2012-to-setup-a-kms-host.aspx
(this article describes WS2012, not WS2012R2, but it's the same procedure. Note that a Windows Server 2012 R2 CSVLK can activate Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, Windows Server 2012, Windows 8.1
and Windows Server 2012 R2 KMS clients.)
To do this, you will need the KMShost product key (CSVLK) for WS2012R2. You can't use an older version product key for this.
http://social.technet.microsoft.com/wiki/contents/articles/22510.volume-activation-kms-mak-adba-avma.aspx
So, you would setup KMS02 with the KMShost feature for Windows, then add the Office2010 KMShost license pack + Office2010 KMShost key, then add the Office2013 KMShost license pack + Office2013 KMShost key. (the Office license pack downloads are linked
in the above wiki)
By default, KMS02 will attempt to self-publish into your DNS (so that your KMSclients can discover it and begin activating with it).
If existing KMSclients have previously discovered KMS01, those existing KMSclients will continue to contact KMS01 (because clients will cache the KMS they last discovered and used).
You may wish to export the data from KMS01/VAMT2.0 as a file, then, import to KMS02/VAMT3.1:
http://technet.microsoft.com/en-us/library/hh824976.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

VMware Fusion 3 Migration Assistant to migrate physical PC onto existing VM

I posted this on Twitter: VMware announces VMware Fusion 3 details for Mac OS http://bit.ly/43BLHJ
Good to see Fusion 3 coming. I have a question about its Migration Assistant and wonder if anyone can answer based on their use of the assistant in version 2.x
I wonder if it means installed applications on a physical PC are also copied over fully functional to the new virtual machine or just user settings and documents from the PC?
I have an HP Pavilion 17" laptop I despise (noisy hard drives and fans actually can bring on headaches). So this would be good to migrate to my MacBook Pro.
The problem then is, is there a way to migrate the external physical PC onto a VMware based set up I already started using or if that set up will become redundant? Anyone have ideas?
Imran

According to the Migration Assistant dialog, programs, computer settings, and documents will be copied. It requires that both the Mac and the PC be on and connected through the same network.
For your info, VMWare also offers a free stand-alone utility that does what I think you're looking for. It's called VMWare Converter, and it can be found here:
http://www.vmware.com/products/converter/
(For all I know, this is what the migration assistant uses.)
It can be run from the system you want to convert or (more ideally) you'd run it to copy the system that you want to convert, without the operating system actively running (basically, run the converter from another computer and have the hard drive with the OS to be virtualized mounted). It takes a while, but it ultimately produces some virtual machine files that can be used by VMWare.
I've used it once before, when I was switching my fiancee over from a terrible HP Pavilion laptop (15") to a Macbook. It was rather incredible - her entire system was cloned perfectly, and easily accessible through VMWare Fusion. Some useless utilities could be removed (things like special keyboard control software and Intel's wireless client manager, as the hardware that those programs utilized was no longer there) but otherwise all data and programs were copied perfectly. You'd never know that it was a copy of a real machine, it was so perfect. Really fantastic stuff.

P2v migration,brandzone solaris10 on solaris 11-Exiting with exit code 254

hi...
doing p2v migration on vmware : solaris 10 as branded zone on solaris 11
im moving my physical machine solaris 10 to brand zone as in soialris 11
some how im facing the issues..while zone installation
it fails at the end
follwing are the logs::
root@solaris11:/var/log/zones# tail -f zoneadm.20120304T231155Z.s10zone.install
[Monday, March 5, 2012 04:42:03 AM IST] | install_flar
[Monday, March 5, 2012 04:42:07 AM IST] setting ZFS property zoned=on on zpool1/zones/rpool
[Monday, March 5, 2012 04:42:10 AM IST] setting ZFS property canmount=on on zpool1/zones/rpool
[Monday, March 5, 2012 04:42:10 AM IST] setting ZFS property mountpoint=/rpool on zpool1/zones/rpool
[Monday, March 5, 2012 04:42:14 AM IST] setting ZFS property canmount=noauto on zpool1/zones/rpool/ROOT
[Monday, March 5, 2012 04:42:14 AM IST] setting ZFS property mountpoint=legacy on zpool1/zones/rpool/ROOT
[Monday, March 5, 2012 04:42:15 AM IST] Creating active_ds zpool1/zones/rpool/ROOT/zbe-0
[Monday, March 5, 2012 04:42:16 AM IST] Mounting boot environment in zpool1/zones/rpool/ROOT/zbe-0 at /zpool1/zones/root (including child datasets)
[Monday, March 5, 2012 04:42:17 AM IST] Preparing to mount zpool1/zones/rpool/ROOT/zbe-0 at /zpool1/zones/root
[Monday, March 5, 2012 04:42:17 AM IST] Mounting zpool1/zones/rpool/ROOT/zbe-0 at /zpool1/zones/root/ with ZFS temporary mount
[Monday, March 5, 2012 05:23:37 AM IST] ERROR: Unpacking the archive failed
[Monday, March 5, 2012 05:23:37 AM IST] Destroying datasets under zpool1/zones that are not pinned
[Monday, March 5, 2012 05:24:57 AM IST] Destroyed unpinned dataset zpool1/zones/rpool/ROOT/zbe-0
[Monday, March 5, 2012 05:24:57 AM IST] Unpinning datasets under zpool1/zones
[Monday, March 5, 2012 05:24:58 AM IST] Unpinning zpool1/zones
[Monday, March 5, 2012 05:24:58 AM IST] Unpinning zpool1/zones/rpool
[Monday, March 5, 2012 05:24:58 AM IST] Unpinning zpool1/zones/rpool/ROOT
[Monday, March 5, 2012 05:24:58 AM IST] Unpinning zpool1/zones/rpool/export
[Monday, March 5, 2012 05:24:58 AM IST] Unpinning zpool1/zones/rpool/export/home
[Monday, March 5, 2012 05:24:58 AM IST] Exiting with exit code 254
[Monday, March 5, 2012 05:24:58 AM IST] ==== Completed: ====
zone configuration :
root@solaris11:/var/log/zones# zonecfg -z s10zone
zonecfg:s10zone> info
zonename: s10zone
zonepath: /zpool1/zones
brand: solaris10
autoboot: false
bootargs:
file-mac-profile:
pool:
limitpriv:
scheduling-class:
ip-type: exclusive
hostid: 0005b1bc
fs-allowed:
[max-lwps: 32500]
[max-processes: 16250]
attr:
name: zonep2vchk-info
type: string
value: "p2v of host test"
attr:
name: num-cpus
type: string
value: "original system had 2 cpus"
rctl:
name: zone.max-processes
value: (priv=privileged,limit=16250,action=deny)
rctl:
name: zone.max-lwps
value: (priv=privileged,limit=32500,action=deny)
will provide the truss o/p if needed..
my solaris 11 having the system/zones/brand/brand-solaris10
please guide me to clear the issue...any doc will really helpful....
thanks again
muvvas
Edited by: user13152599 on Mar 5, 2012 8:17 AM

source machine:::
bash-3.2# cat /etc/release
Solaris Express Community Edition snv_101a X86
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 31 October 2008
and its ufs
flarcreate -S -n s10-system /nfs/s10-system.flar
on target solaris 11::i have executed the following cmds::;
zonecfg -z s10-zone -f zone.config
zoneadm -z s10-zone install -u -a /export/home/muvvas/s10-system.flar
rpool 20G 39K 9.3G 1% /rpool
zpool1 47G 32K 40G 1% /zpool1
zpool1/zones 47G 6.5G 40G 14% /zpool1/zones

Migrate GW7 to Linux GW7 or 8 with c06b , with libraries

Howdy ,
( reason for my migration is speed of Linux and slightly damaged edir , so in this scenario i also have created a new tree!)
After browsing around because i bumped into the c06b error when trying to load the poa on linux i was suprised that there was little or no information around to upgrade to linux with libraries .. apart from the check in check out options .. which actully works ...but safety of documents id thought id post the way we did it to spare people the check in check out option and just migrate to full :)
In my company there are 30+ libraries stored on the same server .. residing outside our poa , on the same disk system but not within the poa ..
* old system * NW6.5 SP8 / GW 7.03 (tree 1 )
WEBACC (\\SERVER\VOL\grpwise\dmn\web)
GWIA (\\SERVER\VOL\grpwise\dmn\gwia)
POA &MTA (\\SERVER\VOL\grpwise\poa) (\\SERVER\VOL\grpwise\mta)
Remote storage area's
(\\SERVER\VOL\grpwise\poa\lib1)
(\\SERVER\VOL\grpwise\poa\lib2) etc etc
migrating all this to
* Linux OES2 SUSE10 (tree 2 )
7.03 / 8.0 agents installed ( default location)
/media/nss/VOL/grpwise
so keeping my structures basicly the same..
Now for the basic file transfer we decided to go with Rsync .. , this gives us time to copy while on production and resync when we want to have a freeze point to actually go live on linux, whitout disturbing production.
during this rsync , we created a new tree and created all the users inside the new tree , reinstalled zenworks etc etc ..
so tree2 was tested with login scripts etc while the rsync was copying data from the old NW server to the New LNX server.
once rsync was done we grafted the groupwise objects into the new tree (LINUX)once in the new tree the paths of the remote storage area's has to be set then a rebuild of the poa is prefferred .. however here's 1 catch
all the files are still UPPER and LOWER case , u need to correct this (ON LINUX).. there are scripts around .. after correcting this .. we tried to load the poa .. no success .. ( changed UNC paths from console one windows, also added the native linux path to match our newly system )
c06b ( ran gwcheck .. same result)
so we setted up a new netware server in the new tree .. resynced to that server , regrafted the lot again .. ( gwagents installed )
modify the storage area paths again .. and it loads .. ON netware 6.5 sp8 ..
from this point we tried the migration tool to merge it into linux ( since we want a new tree .. and im quite certain it doesnt migrate trees .. )
we had to set up the netware box ( once again not to disturb production )
only this time using the migration tool .. ( since the data was present on the lnx server migration took 2 hours ) however when completed ... no poa on linux .. c06b error ..gwchecked again .. same result ..
so then we tried loading the poa on the netware box with the storage area's on linux( once again modifying the paths in console one/windows )
it worked .. my new netware box was running storage area's on linux .. without errors on the netware poa .. so there has to be something off .. don't you think ?
so proven that the netware server can load the storage area's of the linux server ( in the same tree ... this was my fall back if linux failed to migrate)
however still no poa agent with libraries on linux .. here's the sollution
install console one on the LINUX server with gw snapins .. ull notice that all the storage area's UNC paths have changed .. this is incorrect.. u have to modify the UNC path to the native linux one .. and u have to do this on the linux consoleone version ..
console one windows UNC path of the storage area looks like this
\\SERVER\VOL\POA\LIB
when loading LINUX consoleone UNC looks like this
/media/nss/VOL/SERVER/VOL/POA/LIB or similar ...........in my case this should be:
UNC
/media/nss/vol/poa/lib
LINUX PAth
/media/nss/vol/poa/lib
u can verify this by bringing up your new POA on linux with NOCFG
( be sure to make changes to the MTA /PORTS ETC, so it can communicate with the poa ! )
modify the paths in linux console one and watch the magic ,,,ull notice that if u access the library ( poa loaded with show :) ) and the path isn't modified correctly the c06b error pops over ..
Give it time to update though ..
after that u can launch your new POA from the console without NOCFG
and every works nice and dandy !

thedevastator,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Replica Migrate Physical box to VM

Hello All,
1) We would like to migrate our aging physical OES DHCP box to our VM environment.
2) The current physical box has a replica of all our partitions and they are R/W.
3) This box is using Failover Peer protocol with another DHCP box.
4) Is it OK do to a live migration over to the VM with that box having a replica of all our partitions?
Thanks
-Hans

hpfeil,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Migrated from old Mac to new Mac with Lion, iPhoto 6 still here, can't update

Hi, I just migrated from an old MacBook to a brand new MacBook Pro. The Apple Store did the migration for me. For some strange reason, iPhoto 6 is present on this Mac, even though it should have come with iPhoto '11. I understand that I should be able to install iPhoto '11 from the App Store, since this Mac is entitled to it, but it only shows up as a $15 purcahse instead.
Does anyone know how to get the App Store to recognise that this Mac shipped with, and is entitled to, iPhoto '1?

First, get rid of any old copy of iPhoto you have on the new computer. Log into the App Store using your Apple ID. Click on Purchases icon. At the top you should find the three iLife apps with an Accept button to click on. Then you can download iPhoto without having to pay for it.

Sum Aggregation Error in Physical & BMM Layer in OBIEE 11g with Essbase 11

Hi everyone,
I'm using OBIEE 11g with Essbase 11 as the data source. I'm using Sample Basic database from the Essbase as my data source. If I'm using the hierarchy for the measures (so I don't flatten the measures), and when I changed the aggregation in both physical and BMM layer from Aggregate_External to Sum, I can't create a report at all from the Answers.
Does anyone encounter the same thing? Any ideas/solution about this? Please help.
Thanks a lot!

Hi Deepak,
When I picked the "Basic - measure" alone, I got this error.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 96002] Essbase Error: Unknown Member Basic - measure used in query (HY000)
SQL Issued: SELECT 0 s_0, "Sample Basic"."Basic"."Basic - measure" s_1 FROM "Sample Basic".
When I picked the "Gen1,Measures" alone from the measure dimension, I got this error:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 46008] Internal error: File server\Query\Optimizer\ServiceInterfaceMgr\SIMDB\Src\SQOIMDXGeneratorGeneric.cpp, line 2610. (HY000)
SQL Issued: SELECT 0 s_0, "Sample Basic"."Measures"."Gen1,Measures" s_1, SORTKEY("Sample Basic"."Measures"."Gen1,Measures") s_2 FROM "Sample Basic"
But when I queried the dimensions one by one (only single dimension each), no error was shown.
This only happens if I use Sum in the physical and BMM layer. If I use External_Aggregation, these errors do not happen. And if I flatten the measures, these errors also do not happen.

Issue with physical standby database not in sync with primary

Hi,
I created an physical standby database couple of Hours back . I am trying to keep the standby database in Managed recovery mode to make the standby in sync with primary but it is throwing the below erros. Please share your suggestion ...
SQL> select thread#,max(sequence#) from v$log_history group by thread#;
THREAD# MAX(SEQUENCE#)
1 7
PROCESS STATUS THREAD# SEQUENCE#
ARCH CONNECTED 0 0
ARCH CONNECTED 0 0
RFS OPENING 1 12
ALERT LOG :
Tue Mar 20 07:31:32 2012
alter database recover managed standby database disconnect from session
Tue Mar 20 07:31:32 2012
Attempt to start background Managed Standby Recovery process (PRIMARY)
MRP0 started with pid=18, OS id=16370
Tue Mar 20 07:31:32 2012
MRP0: Background Managed Standby Recovery process started (PRIMARY)
Managed Standby Recovery not using Real Time Apply
parallel recovery started with 8 processes
Media Recovery Log /oracle/STDBY/arch/1_3_777567883.dbf
Tue Mar 20 07:31:39 2012
Completed: alter database recover managed standby database disconnect from session
Tue Mar 20 07:31:54 2012
Incomplete recovery applied all redo ever generated.
Recovery completed through change 9677325080303
Tue Mar 20 07:31:54 2012
MRP0: Media Recovery Complete (PRIMARY)
Tue Mar 20 07:31:55 2012
MRP0: Background Media Recovery process shutdown (PRIMARY)
Thanks,
Rakesh

HI CKPT,
Thanks for the reply. All the Archives from primary are transferred to the standby by RFS. Also i tried to register the log files manually even but it says already registered. They are no errors in the primary instance alert log file. Please find the log
SEVERITY ERROR_CODE MESSAGE TO_CHAR(TIMESTAMP,'D
Informational 0 ARC0: Archival started 20-MAR-2012 06:51:36
Informational 0 ARC1: Archival started 20-MAR-2012 06:51:36
Informational 0 ARC0: Becoming the 'no FAL' ARCH 20-MAR-2012 06:51:36
Informational 0 ARC0: Becoming the 'no SRL' ARCH 20-MAR-2012 06:51:36
Informational 0 ARC1: Becoming the heartbeat ARCH 20-MAR-2012 06:51:36
Informational 0 Redo Shipping Client Connected as PUBLIC 20-MAR-2012 06:52:07
Informational 0 -- Connected User is Valid 20-MAR-2012 06:52:07
Informational 0 RFS[1]: Assigned to RFS process 15934 20-MAR-2012 06:52:07
Informational 0 RFS[1]: Identified database type as 'physical standby' 20-MAR-2012 06:52:07
Warning 0 RFS[1]: No standby redo logfiles created 20-MAR-2012 06:52:07
Control 0 Attempt to start background Managed Standby Recovery process 20-MAR-2012 06:52:42
Control 0 MRP0: Background Managed Standby Recovery process started 20-MAR-2012 06:52:42
Informational 0 Managed Standby Recovery not using Real Time Apply 20-MAR-2012 06:52:47
Informational 0 Media Recovery Log /oracle/STDBY/arch/1_3_777567883.d 20-MAR-2012 06:52:49
bf
Control 0 MRP0: Media Recovery Complete 20-MAR-2012 06:53:04
Control 0 MRP0: Background Media Recovery process shutdown 20-MAR-2012 06:53:06
Informational 0 Managed Standby Recovery not using Real Time Apply 20-MAR-2012 06:53:24
Control 0 Media Recovery Complete 20-MAR-2012 06:53:43
Control 0 Attempt to start background Managed Standby Recovery process 20-MAR-2012 06:54:55
Control 0 MRP0: Background Managed Standby Recovery process started 20-MAR-2012 06:54:55
Informational 0 Managed Standby Recovery not using Real Time Apply 20-MAR-2012 06:55:00
Informational 0 Media Recovery Log /oracle/STDBY/arch/1_3_777567883.d 20-MAR-2012 06:55:01
bf
Control 0 MRP0: Media Recovery Complete 20-MAR-2012 06:55:17
Control 0 MRP0: Background Media Recovery process shutdown 20-MAR-2012 06:55:18
Informational 0 Redo Shipping Client Connected as PUBLIC 20-MAR-2012 07:31:03
Informational 0 -- Connected User is Valid 20-MAR-2012 07:31:03
Informational 0 RFS[2]: Assigned to RFS process 16366 20-MAR-2012 07:31:03
Informational 0 RFS[2]: Identified database type as 'physical standby' 20-MAR-2012 07:31:03
Warning 0 RFS[2]: No standby redo logfiles created 20-MAR-2012 07:31:04
Warning 0 RFS[2]: No standby redo logfiles created 20-MAR-2012 07:31:06
Control 0 Attempt to start background Managed Standby Recovery process 20-MAR-2012 07:31:32
Control 0 MRP0: Background Managed Standby Recovery process started 20-MAR-2012 07:31:32
Informational 0 Managed Standby Recovery not using Real Time Apply 20-MAR-2012 07:31:37
Informational 0 Media Recovery Log /oracle/STDBY/arch/1_3_777567883.d 20-MAR-2012 07:31:38
bf
Control 0 MRP0: Media Recovery Complete 20-MAR-2012 07:31:54
Control 0 MRP0: Background Media Recovery process shutdown 20-MAR-2012 07:31:55
36 rows selected.
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/STDBY/arch/
Oldest online log sequence 13
Next log sequence to archive 0
Current log sequence 14
SQL> ho ls -ltra /oracle/STDBY/arch/
total 3754456
drwxr-xr-x 4 oracle dba 4096 Feb 13 17:38 ..
-rw-r----- 1 oracle dba 908516864 Mar 20 06:37 1_8_777567883.dbf
-rw-r----- 1 oracle dba 770419200 Mar 20 06:40 1_3_777567883.dbf
-rw-r----- 1 oracle dba 757698048 Mar 20 06:41 1_4_777567883.dbf
-rw-r----- 1 oracle dba 5171712 Mar 20 06:41 1_5_777567883.dbf
-rw-r----- 1 oracle dba 1060801024 Mar 20 06:43 1_6_777567883.dbf
-rw-r----- 1 oracle dba 323025920 Mar 20 06:43 1_7_777567883.dbf
-rw-r----- 1 oracle dba 1558016 Mar 20 06:43 1_9_777567883.dbf
-rw-r----- 1 oracle dba 4608 Mar 20 06:43 1_10_777567883.dbf
-rw-r----- 1 oracle dba 1579008 Mar 20 06:52 1_11_777567883.dbf
-rw-r----- 1 oracle dba 11876864 Mar 20 07:31 1_12_777567883.dbf
-rw-r----- 1 oracle dba 2560 Mar 20 07:31 1_13_777567883.dbf
drwxr-xr-x 2 oracle dba 36864 Mar 20 07:31 .
SQL>

Server 2003 SBS (with Exchange 2003) migrate to new machine Server 2012 Standard (with Exchange 2013)

This is what I have:
A very outdated machine running a small domain, SBS 2003 and Exchange - this is the ONLY server currently.
This is what my boss ordered:
A Dell R210 II machine with Server 2012 Standard (and I downloaded the trial for Exchange 2013).
He wants the old server completely replaced and gone - with everything moved over (including Exchange) to the new machine. The main reason for the upgrade is that not all users can access email on their machines (Macs, new versions of Outlook, etc.)
I have set up a new standalone server before but never migrated one - and I've found that going from SBS2003/Exchange2003 to Server2012/Exchange2013 is not simple in the least.
I thought I could just set up the new server as a DC on the domain and have everything replicated to it from the source server. Then I could decommission the old server. I have been told that 1) I can't upgrade Exchange 2003 to 2013 and 2) that I shouldn't
put Exchange on a DC. What do you do if you only have the one server?

Hi,
Just additional. Please also refer to following threads and article, then check if can help you.
Migrate
SBS 2003 to Windows Server 2012 Standard
Migration
SBS 2003 to Windows Server 2012 Standard
Transition
from Small Business Server to Standard Windows Server
Hope this helps.
Best regards,
Justin Gu

Can't migrate from 10.8 to 10.9 with Time Machine

My old 2009 MacBookPro stopped working and I replaced it with the new one and hoped to be able to use the Migration Assistant to recover my backed up data I had in Time Machine. So far it jsut keeps "Looking for other sources" when I choose to migrate from Time Machine. I was told I should be able to do this going to the new system and I've done it with out any issues in the past. Is there anything I can do to get this working?

I'm having the same issue with trying to restore a Time Machine backup of a Mavericks machine saved to my Airport Time Capsule to a newly re-installed Macbook Pro running Mavericks. Anyone have any other suggestions?
The Migration Assistant keeps getting stuck on Step 5 of the section "Time Machine And other disk migration" in these instructions http://support.apple.com/kb/HT5872.
The computer names have been set to the same names. My Airport Time Capsule firmware version is 7.7.2.
Solution: I had to click on the Time Capsule icon to enable the "Continue" button. The icon doesn't look like a selectable button, unfortunately.
Message was edited by: alfredbeta

Migrate Physical NW6.5 to VM ESXI with Portlock

Similar Messages

Maybe you are looking for