Migrating C/C++Development environment from Solaris 6 OS to Solaris 10 OS.

Hi,
I have several questions. Hope i can get some advises.
I am tasks to do a migration for my current Development environment from Solaris 6 OS to Solaris 10 OS.
Current Scenaros:
=============
My Development environment is on Solaris 6 OS machine ( 5.6 Generic_105181-31 sun4u sparc SUNW,Ultra-2 )
and where i did my C/C++ codings and compilation for my company software application.
We have purchased a new machine Solaris 10 OS machine ( 5.10 Generic_125100-07 sun4u sparcSUNW,Sun-Fire-V210 )
with the objective to replace the old development H/W and OS.
The machine ( Solaris 6 OS) where the software application currently is running will also be replace with a new machine ( Solaris 10 OS).
The Software application is purely C/C++ codings and has no database requirements.
The application is make up of several executables and they utilise the Solaris Unix queues.
The source codes are compiled using Sun compiliers and libraries.
Problems:
========
I did the followings:
1. Installed the Solaris 10 OS machine with all the necessary compilers and libraries for my C/C++ codes.
2. I ported over all my sourcecodes and makefiles from the old machine ( Solaris 6 ) to the new machine ( Solaris 10 )
3. I did a recompilation of the source codes on the new Solaris 10 machine and hit many errors as followings:
"/opt/SUNWspro/prod/include/CC/rw7/rw/rstream.h", line 46: Error: The name istream is ambiguous, istream and std::istream.
"/opt/SUNWspro/prod/include/CC/rw7/rw/rstream.h", line 46: Error: The type "istream" is incomplete.
"/opt/SUNWspro/prod/include/CC/rw7/rw/stringid.h", line 50: Error: The name ostream is ambiguous, ostream and std::ostream.
"/opt/SUNWspro/prod/include/CC/rw7/rw/stringid.h", line 50: Error: The name ostream is ambiguous, ostream and std::ostream.
"/opt/SUNWspro/prod/include/CC/rw7/rw/rwdate.h", line 82: Error: The name istream is ambiguous, istream and std::istream.
"/opt/SUNWspro/prod/include/CC/rw7/rw/vstream.h", line 92: Error: The name ios is ambiguous, ios and std::ios.
"/opt/SUNWspro/prod/include/CC/rw7/rw/vstream.h", line 92: Error: eofbit is not a member of ios.
"/opt/SUNWspro/prod/include/CC/rw7/rw/locale.h", line 115: Error: The name ios is ambiguous, ios and std::ios.
"/opt/SUNWspro/prod/include/CC/rw7/rw/rwdate.h", line 151: Error: The name ostream is ambiguous, ostream and std::ostream.
"/opt/SUNWspro/prod/include/CC/rw7/rw/rwerr.h", line 197: Error: The name ios is ambiguous, ios and std::ios.
"/opt/SUNWspro/prod/include/CC/rw7/rw/cstring.h", line 347: Error: The name istream is ambiguous, istream and std::istream.
Questions:
========
1. Can anyone advise on these errors messages that i am seeing?
2. Can i say that as long i can successful recompile my codes on Solaris 10 , my application will work?
3. Can i simply copy my application ( Compiled in Solaris 6 ) directly to the new Solaris 10 machine and expect it to run properly? What are the concerns if i adopt this approach.
Regards,
Edwin

I did the followings:
1. Installed the Solaris 10 OS machine with all the necessary compilers and libraries for my C/C++ codes.
2. I ported over all my sourcecodes and makefiles from the old machine ( Solaris 6 ) to the new machine ( Solaris 10 )
3. I did a recompilation of the source codes on the new Solaris 10 machine and hit many errors as followings:
"/opt/SUNWspro/prod/include/CC/rw7/rw/rstream.h", line 46: Error: The name istream is ambiguous, istream and std::istream.
"/opt/SUNWspro/prod/include/CC/rw7/rw/rstream.h", line 46: Error: The type "istream" is incomplete.
"/opt/SUNWspro/prod/include/CC/rw7/rw/stringid.h", line 50: Error: The name ostream is ambiguous, ostream and std::ostream.
"/opt/SUNWspro/prod/include/CC/rw7/rw/stringid.h", line 50: Error: The name ostream is ambiguous, ostream and std::ostream.
"/opt/SUNWspro/prod/include/CC/rw7/rw/rwdate.h", line 82: Error: The name istream is ambiguous, istream and std::istream.
"/opt/SUNWspro/prod/include/CC/rw7/rw/vstream.h", line 92: Error: The name ios is ambiguous, ios and std::ios.
"/opt/SUNWspro/prod/include/CC/rw7/rw/vstream.h", line 92: Error: eofbit is not a member of ios.
"/opt/SUNWspro/prod/include/CC/rw7/rw/locale.h", line 115: Error: The name ios is ambiguous, ios and std::ios.
"/opt/SUNWspro/prod/include/CC/rw7/rw/rwdate.h", line 151: Error: The name ostream is ambiguous, ostream and std::ostream.
"/opt/SUNWspro/prod/include/CC/rw7/rw/rwerr.h", line 197: Error: The name ios is ambiguous, ios and std::ios.
"/opt/SUNWspro/prod/include/CC/rw7/rw/cstring.h", line 347: Error: The name istream is ambiguous, istream and std::istream.
Questions:
========
1. Can anyone advise on these errors messages that i am seeing?My guess would be that the names have changed from Solaris 6 to Solaris 10.
2. Can i say that as long i can successful recompile my codes on Solaris 10 , my application will work?No. I've seen GNU utilities that compile without error and then fail on make test or make check. A clean compile only means that, a clean compile nothing more.
3. Can i simply copy my application ( Compiled in Solaris 6 ) directly to the new Solaris 10 machine and expect it to run properly? What are the concerns if i adopt this approach.It might. The easiest way to find out is to just move it and see what happens. On a test machine of course.
alan

Similar Messages

I need to migrate an XPI developed for Firefox 2.x on Solaris to Firefox 3.6 for Windows

I need to migrate an XPI developed for Firefox 2.x on Sun Solaris to Firefox 3.6 on Windows. The XPI archive contains a XUL file which gives many error messages when I use the XPI addon:
C:\>firefox.exe -trmail-view
What would be the best approach? Try to modify existing files XUL/JS files or start with the new JS files from Firefox 3.6 Windows?
Existing XPI contains files:
Directory of C:\Documents and Settings\BogdanS\My Documents\solaristrmail_2008_03-all
03/10/2011 05:13 PM <DIR> chrome
02/05/2008 11:21 AM 31 chrome.manifest
03/10/2011 05:14 PM <DIR> components
03/10/2011 12:38 PM 942 install.rdf
Directory of C:\Documents and Settings\BogdanS\My Documents\solaristrmail_2008_03-all\chrome\content
03/06/2008 03:42 PM 274 cfg.js
03/06/2008 03:39 PM 15,164 dispatcher.js
03/05/2008 01:44 PM 19,923 errorManager.js
03/05/2008 02:45 PM 32,339 folders.js
03/05/2008 03:07 PM 36,291 messages.js
03/05/2008 03:07 PM 12,869 search.js
02/20/2008 03:30 PM 5,587 settings.js
03/05/2008 01:46 PM 11,442 trUtils.js
03/10/2011 05:40 PM 80,398 trwin.xul
03/06/2008 03:43 PM 13,115 utils.js
Directory of C:\Documents and Settings\BogdanS\My Documents\solaristrmail_2008_03-all\components
02/12/2008 03:28 PM 5,527 .#trProtocol.js.1.2
02/12/2008 12:46 PM 5,924 trcommandline.js
02/22/2008 09:41 AM 5,719 trProtocol.js

Credit Tony E
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data. See https://support.mozilla.com/kb/Uninstalling+Firefox
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

Question is it possible to build a Development environment from my current production environment VMs

My server admin thinks it is possible to setup a new development environment using copies of the Production VMs.
He will rename the SQL Server and Sharepoint vms see below:
SHAREPOINT SERVER
IP: New IP Address
FQDN: DEVSharePoint.Local
SharePoint SQL SERVER
IP:New IP address
FQDN: DEVSQLSRV.Local
Wouldn't I also need to point IIS in the VM to the new DevSharePoint and new DevSQL using the CA, but curently it is looking like the CA points back to the orignal CA and I don't want to remove a server if that is correct? Also how would I point to
the Central Admin Site to the new location?
how can I quickly resolve this? so I don't impact the current environment with testing new development?

I think that the best if to create new dev environment.
Then you can migrate your current SharePoint databases (Content, Services) to the new dev environment.
References:
Create Dev SharePoint Environment
Move Content Databases in SharePoint 2013
[custom.development]

Migration from AIX Oracle8i to Solaris Oracle8i?

Hi,
I wonder how to migrate Oracle 8i (8.1.7) on AIX to Oracle
8i (8.1.7) on Solaris?
The Oracle version is the same, but only the O.S platform is
different. I have found the migration information from Oracle
web site but it only talks about migration between different
database.
Thanks.

> In our organisation, we are planning to migrate from AIX6.1 to Solaris x64. The processor which we'll be using is UltraSPARC+IV processor.
Well - I think you're mixing a few things up here.
Solaris x64 refers to Solaris on the Intel or the AMD processor (x64 == x86_64 == AMD64)
UltraSPARC IV+ refers to a CPU developed by Sun (now Oracle).
> 1. Which guide to refer for moving the SAP System from AIX6.1 to Solaris
There are no specific guides for OS migrations. You use the heterogeneous system copy approach. However, migrating a database and/or operating system requires a certified migration consultant on-site doing the migration. If you do it yourself you'll loose support from SAP for problems during the migration and for the target system (see http://service.sap.com/osdbmigration).
> 2. Is UltraSPARC+IV processor is supported for Oracle 10g
Yes. Solaris 10 on SPARC Is supported.
Markus

Migration from AIX6.1 to Solaris x64

Hi,
In our organisation, we are planning to migrate from AIX6.1 to Solaris x64. The processor which we'll be using is UltraSPARC+IV processor. I need clarification for below mentioned points.
1. Which guide to refer for moving the SAP System from AIX6.1 to Solaris
2. Is UltraSPARC+IV processor is supported for Oracle 10g
Also, please let me know the steps to be followed for the activity mentioned above.
Regards,
Ranjith

> In our organisation, we are planning to migrate from AIX6.1 to Solaris x64. The processor which we'll be using is UltraSPARC+IV processor.
Well - I think you're mixing a few things up here.
Solaris x64 refers to Solaris on the Intel or the AMD processor (x64 == x86_64 == AMD64)
UltraSPARC IV+ refers to a CPU developed by Sun (now Oracle).
> 1. Which guide to refer for moving the SAP System from AIX6.1 to Solaris
There are no specific guides for OS migrations. You use the heterogeneous system copy approach. However, migrating a database and/or operating system requires a certified migration consultant on-site doing the migration. If you do it yourself you'll loose support from SAP for problems during the migration and for the target system (see http://service.sap.com/osdbmigration).
> 2. Is UltraSPARC+IV processor is supported for Oracle 10g
Yes. Solaris 10 on SPARC Is supported.
Markus

Migrate development environment to Eclipse 3.4 M6

I want to migrate development environment to Eclipse 3.4.
I require to use version 2.1 of BEA Server Tools and want the download link for the same as I am using Eclipse 3.4 M6 and version 2.0 doesnt work with it.
Any download link available for the same?
Even Beta version will do.
Thanks,
Manish.

Can you ensure that the SWF your are debugging is a release SWF?
I've recently fixed a bug (which is not publicly available) where the same stacktrace was visible:
A release SWF loads a debug SWF via SWFLoader/ModuleLoader, etc.
Making sure the main container SWF is a debug one. That should fix this problem.
(You can check whether a SWF is debug or not by opening it in nemo440 (google for that) and looking for debugfile / debugline opcodes.)
Let me know how it works out.
Cheers,
Anirudh

Migration of weblogic 8.1 from solaris to 10.3 in Linux

Hello All,
We want migrate our WebLogic 8.1 from Solaris to 10.3 in linux, i am unable to find any documents on this.
Can any one help me on this.
Thanks,
Nkhil

install linux version of weblogic 10.3
create domain, you may have to extend your domain to include adf libraries.
start admin server
goto, console create datasource
also you can enable tunneling
open your project in jdev
create an app. server for tunneling
deploy it.
that's what I did.

Migration from Sun solaris 8 to Solaris 10

Hi,
We are migrating from Solaris 8 to Solaris 10 with the compiler migration also earlier we are using Sun Studio 6 and now it is Sun Studio 11.
When we are compiling the code on Solaris 10 which has been running on the Solaris 8, we are facing some error. So could you help me on this
"ResourceManager.h", line 98: Warning (Anachronism): Type names qualified by template parameters require "typename".
"ConnectionMgr.h", line 62: Where: While specializing "ResourceManager<T>".
"ConnectionMgr.h", line 62: Where: Specialized in non-template code.
"ResourceManager.h", line 100: Warning (Anachronism): Type names qualified by template parameters require "typename".
"ConnectionMgr.h", line 62: Where: While specializing "ResourceManager<T>".
"ConnectionMgr.h", line 62: Where: Specialized in non-template code.
2 Warning(s) detected.
make[1]: *** [obj/ConnectionMgr.o] Error 2
Not sure of the warning , am not able to see these error on the compilation on Sun Studio 6.Below is the bit of the header file code, where the error is occurring.
98 typedef map<ResourceID, ResElement *>::iterator ResMapIterator;
100 typedef list<ResElement *>::iterator ResListIterator;
We are using a /opt/SUNWspro/bin/CC compiler and the verison is CC: Sun C++ 5.8
Please help me out about the issue

Since you are jumping several compiler releases and two Solaris releases, you should migrate in two steps.
1. Get your application working with Sun Studio 11 on Solaris 8.
2. You can now run that application on Solaris 10, or you can rebuild it on Solaris 10 and then run it.
An application built on Solaris 8 will run on Solaris 9 and 10.
An application built on Solaris 10 cannot be run on Solaris 8 or 9.
We promise upward binary compatibility, allowing an old binary to be used with a newer compiler or on a newer Solaris. But we can't promise source code compatibility because we don't want to have to duplicate old bugs in old compilers.
C++ 5.8 in Sun Studio 11 detects errors that older compilers might have missed. The rules about where to use "typename" are one example.
I would not expect the warning about typename to be generated by either of the source code lines that you show, but I can't really tell without seeing a compilable example.
You need to use typename when you use a type that depends on a template parameter. Example:
template <class T> class C1 {
public:
typedef T Type;
template <class T> class C2 {
public:
typename T::Type a;
C2< C1<int> > c2i;If in C2 you do not specify typename, the compiler does not know whether T::Type is intended to be the name of a type. If it is not a type, the code is always invalid. The C++ rule is that if an an identifier is not known to be a type, it is not a type. You use typename to tell the compiler that T::Type is supposed to be the name of a type.

Migration Oracle 8.17 from Solaris 8 to Solaris 10

Is it possible to migrate Oracle 8.1.7 from Solaris 8 to Solaris 10? I find out the papers or the practices from internet that were done before. Do you have any documents said that or gurantee success?

Perhaps contact Oracle.
http://www.oracle.com
Maybe they will know how to make version 8.1.7 work with newer
distributions of various OS's.
After all, it is their product, not Sun's product.

Migrating EBS R12 from Solaris 9 to Solaris 10

Hi
Did anyone tried migrating EBS R12 from Solaris 9 to Solaris 10?
Regards

Also check the following:
Note: 399895.1 - Database Startup On Solaris 10 Fails With Ora-27102 Out Of Memory Error
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=399895.1
Note: 169706.1 - Oracle Database on AIX,HP-UX,Linux,MacOSX,Solaris,Tru64 Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.1)
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=169706.1

Creating or copying application express users from development environment

Hello,
Hope someone can answer my question soon.
I am kind of new to the application express development and to Oracle database too ( about 8 month). I developed an application on development environment at my work. Now it's time to deploy this application to test and production environment. This application is secured so I had an ACL page were I setup 2 users that they can view and edit data, and I setup myself as an admin for this application.
I succsessfully deployed the application on the test and production environment but I cannot login and not other users. How do I setup or to copy same users from Development to production environment.
I am using apex 3.0.1 and database 10g.
on Development I have workspace called development and the schema is DEV. For production I have a workspace called production and the schema called prod. So I am dealing with different 2 workspaces and 2 different schemas but one database instance.
Thank you in advance for your assistance.
Kind Regards,
Sofia.
Edited by: user633945 on Oct 15, 2008 3:36 PM

Hello,
APEX has a utility to export the workspace and the users. In the application, go to export/import --> export --> workspace users (this is not the default view, and you’ll need to choose it). This will generate a SQL script you can import into the source instance.
In general, it’s best to keep the same environment in the development (test) and production instances – The same workspace ID, name, and application ID. These are pre-condition to be allowed to import single page/components between the instances. Otherwise you will have to import the entire application, each time you need to update the application.
In case you can’t maintain the same environment in your instances, you’ll need to manually edit the exported script. If the workspace already exist, you need to delete the ‘Workspace’ section. Then you’ll need to edit the user details, setting the default schema correctly.
Hope this helps,
Arie.

Lost ODBC Connection from development environment

Using LV 7.1 and an Active-X based ODBC Connection scheme to a MySQL database which has worked flawlessly up until now. I've just written an application which accesses the database to generate a 'recipe' for our operators to follow. This is poked into a multicolumn listbox, and works perfectly from the compiled version. However, when I'm running the very same program in the development envirnment, I will get an error which indicates I have lost the connection to the database. Never happened from the built versions, and yes, I'm running exactly the same code. This is irritating, as when I'm trying to debug the SQL pieces, the code crashes. Happily, the compiled versions are working, but it makes me nervous when programs crash like this.
I am doing a listbox refresh every 60s or so, which involves accessing the database, reading a large chunk and displaying it. Im' also doing an ODBC conncetion check every 2s, and possibly some other database access depending on the operator input. MySQL is set up so that I can have 100 threads open at once, and I never approach that. I always open, do command, then close and destroy connections.
All I can think of is that there is a difference in the timing and the database access between the developement environment and the compiled versions.
Any thoughts anyone?

Hi,
Yes, that is exactly what I have done. Built the executable which runs without problems.
I've also tried to strip the program down by simply running the piece which polls the database continually. This seemed to run fine until I ran another program which also accessed the same database. So, to summarize:
1. The development environment program with single loop running accessing the database every 2s or so runs fine.
2. The dev. env. app. running multiple loops possibly accessing the db concurrently crashes
3. The same program as 2 but built into an application runs fine.
MSB

Xcode download from the app store trashed by development environment and I cannot recover by downloading again

I downloaded xcode and it trashed my development environment.
I had previously installed an earlier version.
My purchased apps page does not list XCODE. However, If I go to the XCODE download page in the App, it lists it as installed.
Any suggestions would be gratefully accepted.

Go to your Spotlight search. (Swipe from left to right at your primary home screen.)
Type in 'Facebook'.
You should see your Facebook app.
Unless you held down an app icon until it 'wiggles', then hit the black 'x' to delete it, you didn't delete the app.

Weblogic development environment on Solaris

I have sucessfuly installed Weblogic 5.1 on Solaris and want to proceed
to create a development environment, so I copied the myserver directory
to /path/to/weblogic/dev and copied weblogic.properties to the same, I
then copied startWebLogic.sh to startDev.sh and altered both to point to
my new server and runned the startDev script. The server started, but
using the weblogic.properties in my weblogic directory. I was told by my
instructor that WLS would look inside the directory of the specified
server for another instance of weblogic properties, but it does not seem
to find it. Am I missing something?
Sven
[Cilix Software Ltda.] <http://www.cilix.com.br> Sven E. van ´t Veer
<mailto:[email protected]>
Desenvolvedor Java
Avenida Rio Branco 89, 18o Andar
Centro, CEP 20040-004, Rio de Janeiro - RJ
Tel: 021 - 2331640
[att1.html]
[imagem.JPG]

The properties file is hierarchical. So, if you have a properties file located in the servername directory and one in the root WebLogic installation, the properties file located in the servername directory will overwrite any properties that were previously defined in the root WebLogic installation properties file.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Sven van ´t Veer" <[email protected]> wrote in message news:[email protected]..
I have sucessfuly installed Weblogic 5.1 on Solaris and want to proceed to create a development environment, so I copied the myserver directory to /path/to/weblogic/dev and copied weblogic.properties to the same, I then copied startWebLogic.sh to startDev.sh and altered both to point to my new server and runned the startDev script. The server started, but using the weblogic.properties in my weblogic directory. I was told by my instructor that WLS would look inside the directory of the specified server for another instance of weblogic properties, but it does not seem to find it. Am I missing something?
Sven
Sven E. van ´t Veer
Desenvolvedor Java
Avenida Rio Branco 89, 18o Andar
Centro, CEP 20040-004, Rio de Janeiro - RJ
Tel: 021 - 2331640
[att1.html]
[imagem.JPG]

Migration from Solaris 9 to Solaris 10: Memory fault problem

We are facing to migrate appication from Solaris 9 to Solaris 10,
Compilation was not a problem, but while running the application it is raising the following fault,
tail of truss
Incurred fault #5, FLTACCESS %pc = 0x100025CA8
siginfo: SIGBUS BUS_ADRALN addr=0x101394CC
Received signal #10, SIGBUS [default]
siginfo: SIGBUS BUS_ADRALN addr=0x101394CC
core analysis show that the fault occurs at different points for different runs.
Please let us know if there is a patch to solve the same.
Thanks & Regards

Sorry i should have mentioned it as migration from Solaris 8 to Solaris 10.
Other info: In solaris 8 we compiled using -m32 and on Solaris 10 we are using -m64.
We had never tried on Solaris 9.
i just tried compiling on Solaris 9, i got the same error as in Solaris 10.
I tried to find using dbx but it crashes at different points for different runs.
First Run by pointing connection string - schema 1
dbx m2 core
detected a multithreaded program
program terminated by signal BUS (invalid address alignment)
(/Teamware/bin/../WS5.0/bin/sparcv9/dbx) where
current thread: t@1
=>[1] AddClient(0xffffffff7ffff0c0, 0xffffffff7ffff2f0, 0xffffffff7ffff1d4, 0x373300, 0xff0000000000, 0x8080808080808080), at
0x100025ca8
[2] DBSERV_RadReadProxyClients(0x1, 0x10002599c, 0x0, 0x0, 0x0, 0x0), at 0x10006106c
[3] ClientInitialise(0x1, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x1000263e8
[4] InitialiseDetails(0x1, 0x1, 0x0, 0xffffffff7ffff600, 0xffffffff7ffff5f8, 0xffffffff7ffff5f0), at 0x10002bd4c
[5] ReadDatabaseIntoSharedMem(0x1000a9dd8, 0x2aa5, 0x10cf000, 0x20000000, 0x1, 0x8), at 0x10000c5d0
Second run by pointing Connect-string to Schema 2:
detected a multithreaded program
program terminated by signal BUS (invalid address alignment)
(/Teamware/bin/../WS5.0/bin/sparcv9/dbx) where
current thread: t@1
=>[1] AddReplyMessage(0xffffffff7ffff1d8, 0x6564006d69732d63, 0xffffffff7ffff200, 0x656400, 0xff0000000000,
0x8080808080808080), at 0x10002e458
[2] DBSERV_RadReadRadiusReplyMessages(0x10002e348, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x1000700a4
[3] RadiusReplyMessageInitialise(0x1000b0538, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x10002e2dc
[4] InitialiseDetails(0x1, 0x1, 0x0, 0xffffffff7ffff5f0, 0xffffffff7ffff5e8, 0xffffffff7ffff5e0), at 0x10002bc3c
[5] ReadDatabaseIntoSharedMem(0x1000a9dd8, 0x2c29, 0x1be400, 0x20000000, 0x1, 0x8), at 0x10000c5d0

Migrating C/C++Development environment from Solaris 6 OS to Solaris 10 OS.

Similar Messages

Maybe you are looking for