Migrating E&M immediate start from 2821 VGW to AS5350XM but problems with signalling
Hi,
We currently have 2821 VGW platforms running E&M Immediate start. The T1s go into the DACS and the IP interface connects to the SIP server with a simple number plan.
So, when a T1 DS0 signals, the VGW talks to the SIP server, the SIP server does a database lookup and talks back to the VGW and passes the connection details.
However we are now migrating to the AS5350XM platform and replicating the config from the 2821 to the AS5350XM is causing signalling issues.
Here is a sample of the existing 2821 config:
voice rtp send-recv
voice service pots
voice service voip
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
rel1xx disable
min-se 1700
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
controller T1 1/0
ds0-group 0 timeslots 1 type e&m-immediate-start
ds0-group 1 timeslots 2 type e&m-immediate-start
ds0-group 2 timeslots 3 type e&m-immediate-start
voice-port 1/0:0
define Tx-bits idle 1111
define Tx-bits seize 0000
define Rx-bits idle 1111
define Rx-bits seize 0000
timeouts wait-release 1
connection plar 1000
voice-port 1/0:1
define Tx-bits idle 1111
define Tx-bits seize 0000
define Rx-bits idle 1111
define Rx-bits seize 0000
timeouts wait-release 1
connection plar 1001
voice-port 1/0:2
define Tx-bits idle 1111
define Tx-bits seize 0000
define Rx-bits idle 1111
define Rx-bits seize 0000
timeouts wait-release 1
connection plar 1002
dial-peer voice 1000 pots
destination-pattern 1000
port 1/0:0
dial-peer voice 1001 pots
destination-pattern 1001
port 1/0:1
dial-peer voice 1002 pots
destination-pattern 1002
port 1/0:2
dial-peer voice 1 voip
preference 1
destination-pattern .T
session protocol sipv2
session target ipv4:192.168.150.2:5060
session transport udp
voice-class codec 1
voice-class sip options-keepalive retry 1
sip-ua
retry invite 2
timers trying 150
sip-server ipv4:192.168.150.2:5060
Here is the same on on the AS5350xm:
voice rtp send-recv
voice service pots
voice service voip
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
rel1xx disable
min-se 1700 session-expires 1700
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
controller T1 3/0:1
framing ESF
ds0-group 0 timeslots 1 type e&m-immediate-start
ds0-group 1 timeslots 2 type e&m-immediate-start
ds0-group 2 timeslots 3 type e&m-immediate-start
cas-custom 0
define-abcd loop-open 1 1 1 1
define-abcd loop-closure 0 0 0 0
cas-custom 1
define-abcd loop-open 1 1 1 1
define-abcd loop-closure 0 0 0 0
cas-custom 2
define-abcd loop-open 1 1 1 1
define-abcd loop-closure 0 0 0 0
voice-port 3/0:1:0
timeouts wait-release 1
connection plar 1000
voice-port 3/0:1:1
timeouts wait-release 1
connection plar 1001
voice-port 3/0:1:2
timeouts wait-release 1
connection plar 1002
dial-peer voice 1000 pots
destination-pattern 1000
port 3/0:1:0
dial-peer voice 1001 pots
destination-pattern 1001
port 3/0:1:1
dial-peer voice 1002 pots
destination-pattern 1002
port 3/0:1:2
dial-peer voice 1 voip
preference 1
destination-pattern .T
session protocol sipv2
session target ipv4:192.168.150.2:5060
session transport udp
voice-class codec 1
voice-class sip options-keepalive retry 1
sip-ua
retry invite 2
timers trying 150
sip-server ipv4:192.168.150.2:5060
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
What I did notice was the following:
1) When defining loop open and loop closed custom bit configuration is different....on the 2821 you do it on the voice port. On the AS5350, it is not supported on the voice port but appears to be configurable via the T1 controller. I'm not sure if the AS5350 needs any further E&M signalling configuration as the problem lies in the signalling....the AS5350 when the line is cleared down appears to start ringing it again and not following the signalling pattern.
2) When doing a "show voice port" on the AS5350XM does not show E&M signalling, whereas it does on the 2821:
AS5350XM:
5350VGW#sh voice port
DS0 Group 3/0:1:0 - 3/0:1:0
Type of VoicePort is CAS
Operation State is DORMANT
Administrative State is UP
No Interface Down Failure
Description is not set
Noise Regeneration is enabled
Non Linear Processing is enabled
Non Linear Mute is disabled
Non Linear Threshold is -21 dB
Music On Hold Threshold is Set to -38 dBm
In Gain is Set to 0 dB
Out Attenuation is Set to 0 dB
Echo Cancellation is enabled
Echo Cancellation NLP mute is disabled
Echo Cancellation NLP threshold is -21 dB
Echo Cancel Coverage is set to 128 ms
Echo Cancel worst case ERL is set to 6 dB
Playout-delay Mode is set to adaptive
Playout-delay Nominal is set to 60 ms
Playout-delay Maximum is set to 1000 ms
Playout-delay Minimum mode is set to default, value 40 ms
Playout-delay Fax is set to 300 ms
Connection Mode is plar
Connection Number is 1000
Initial Time Out is set to 15 s
Interdigit Time Out is set to 10 s
Call Disconnect Time Out is set to 60 s
Ringing Time Out is set to 180 s
Wait Release Time Out is set to 1 s
Spe country is not configured
Region Tone is set for US
Station name None, Station number None
Translation profile (Incoming):
Translation profile (Outgoing):
lpcor (Incoming):
lpcor (Outgoing):
DS0 channel specific status info:
IN OUT
PORT CH SIG-TYPE OPER STATUS STATUS TIP RING
=============== == ============ ==== ====== ====== === ====
2821:
2821VGW#sh voice port
recEive and transMit Slot is 0, Subslot is 0, Sub-unit is 0, Port is 0
Type of VoicePort is E&M
Operation State is DORMANT
Administrative State is UP
No Interface Down Failure
Description is not set
Noise Regeneration is enabled
Non Linear Processing is enabled
Non Linear Mute is disabled
Non Linear Threshold is -21 dB
Music On Hold Threshold is Set to -38 dBm
In Gain is Set to 0 dB
Out Attenuation is Set to 0 dB
Echo Cancellation is enabled
Echo Cancellation NLP mute is disabled
Echo Cancellation NLP threshold is -21 dB
Echo Cancel Coverage is set to 128 ms
Echo Cancel worst case ERL is set to 6 dB
Playout-delay Mode is set to adaptive
Playout-delay Nominal is set to 60 ms
Playout-delay Maximum is set to 1000 ms
Playout-delay Minimum mode is set to default, value 40 ms
Playout-delay Fax is set to 300 ms
Connection Mode is plar
Connection Number is 1000
Initial Time Out is set to 15 s
Interdigit Time Out is set to 10 s
Call Disconnect Time Out is set to 60 s
Ringing Time Out is set to 180 s
Wait Release Time Out is set to 1 s
Companding Type is u-law
Rx A bit no conditioning set
Rx B bit no conditioning set
Rx C bit no conditioning set
Rx D bit no conditioning set
Tx A bit no conditioning set
Tx B bit no conditioning set
Tx C bit no conditioning set
Tx D bit no conditioning set
Rx Seize ABCD bits = 0000 Custom pattern
Rx Idle ABCD bits = 1111 Custom pattern
Tx Seize ABCD bits = 0000 Custom pattern
Tx Idle ABCD bits = 1111 Custom pattern
Ignored Rx ABCD bits = BCD
Region Tone is set for US
Analog Info Follows:
Currently processing none
Maintenance Mode Set to None (not in mtc mode)
Number of signaling protocol errors are 0
Station name None, Station number None
Translation profile (Incoming):
Translation profile (Outgoing):
lpcor (Incoming):
lpcor (Outgoing):
Voice card specific Info Follows:
Operation Type is 2-wire
E&M Type is 1
Signal Type is immediate
Dial Out Type is dtmf
In Seizure is inactive
Out Seizure is inactive
Digit Duration Timing is set to 100 ms
InterDigit Duration Timing is set to 100 ms
Pulse Rate Timing is set to 10 pulses/second
InterDigit Pulse Duration Timing is set to 750 ms
Clear Wait Duration Timing is set to 400 ms
Wink Wait Duration Timing is set to 200 ms
Wait Wink Duration Timing is set to 550 ms
Wink Duration Timing is set to 200 ms
Minimum received Wink Duration Timing is set to 140 ms
Maximun received Wink Duration Timing is set to 290 ms
Minimum seizure Timing is set to 50 ms
Delay Start Timing is set to 300 ms
Delay Duration Timing is set to 2000 ms
Dial Pulse Min. Delay is set to 140 ms
Percent Break of Pulse is 60 percent
Auto Cut-through is disabled
Dialout Delay is 300 ms
Hookflash-in Timing is set to 480 ms
Hookflash-out Timing is set to 400 ms
DS0 channel specific status info:
IN OUT
PORT CH SIG-TYPE OPER STATUS STATUS TIP RING
=============== == ============ ==== ====== ====== === ====
0/0/0:0 01 e&m-imd dorm idle idle
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Can anyone advise if further configuration is required on the AS5350XM in order to pass the E&M signalling correctly ?
Well for me the forms were ok to open with 11g, just had to correct differences and recompile to run.
That there script is a ton of help!..well you forgot to mention the Output_File parameter, but I could find that myself now that I knew what to look at. Now if I could also set it not to produce .err files when everything went fine and to set the output names so that the old compiled forms get overwritten..
the SRW.* calls turned out to be things used in Reports, so it was hopeless to compile in forms..but also not needed
as for ENABLE_ITEM and DISABLE_ITEM I found these to use as their definitions in a library, that proved sufficient.
procedure enable_item
( p_menuName in varchar2
, p_menuItemName in varchar2
) is
v_menuItem menuitem;
begin
v_menuItem := find_menu_item(p_menuName||'.'||
p_menuItemName);
if (not id_null(v_menuItem))
and (get_menu_item_property(v_menuItem,visible) = 'TRUE')
then
set_menu_item_property(v_menuItem, enabled, property_true);
end if;
end;
procedure disable_item
( p_menuName in varchar2
, p_menuItemName in varchar2
) is
v_menuItem menuitem;
begin
v_menuItem := find_menu_item(p_menuName||'.'||
p_menuItemName);
if (not id_null(v_menuItem))
and (get_menu_item_property(v_menuItem,visible) = 'TRUE')
then
set_menu_item_property(v_menuItem, enabled, property_false);
end if;
end;Some forms still playing with me, but the compilation issues there don't seem to be connected with this topic..and now I got issues with reports >.< but that requires a topic elsewhere. Thanks all!
Similar Messages
-
My IPad cannot download live Tv from skygo. I have no problem with my lap top so I assume the broad band is okay. Can anybody suggest why the live streaming will not work on my iPad .
Are you using the Sky Go app to try and watch it ? If so are you logged in with your Sky account ?
If you are using the app then you could try closing the app completely and see if it works when you re-open it : from the home screen (i.e. not with Sky Go 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Sky Go app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
I recently downloaded Aperture 3 from itunes. I have a problem with faces.
I recently downloaded Aperture 3 from itunes. I have a problem with Faces.
In Faces Mode when a particular face is selected it is wrongly including, from the 11.5k photos in my Aperture library, people with different names and photos where people have deliberately not been named. This happens every few photos between the correctly named ones and makes Faces virtually unuseable.
I took my 27" imac 2.8 GHz Intel Core i5 to Apple in the Trafford Centre where a patient assistant, Andy spent 2 hours trying to resolve the problem to no avail.
In his attempts, he consolidated my iphoto library into Aperture and even reinstalled Aperture. He confirms I am using the programme properly.
Iphoto Faces works perfectly and is used regularly by family, grandchildren etc,. I want to move away from iIphoto and use just Aperture as it is intended.
Can anybody help.I have tried all aspects of the troubleshooting basics including the 1st aid section except the rebuild data basis.
The Apple assistant at the shop suggested I contact Apple as he couldn't resolve this issue.
His laptop also suffered a snag I also experience where the left & right hand pointers intermittently stop moving through the photos. I have to come out of Faces and back again for it to resume operating correctly. -
I have new MacBook Air. When I first got it, I migrated some of my files from my PC to the MacBook Air without any problems. Now I'm trying to migrate more files, music, etc. and I keep getting the continuous spining circle with "Looking for Other Computers." I've tried everything and for some reason it is not finding my PC. What am I doing wrong?
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
my eraphone of my iphone 4s white unlocked make strange noises during the call and still doing the noise like an interference or saturing the spekaer
This is a common problem with iPhone 4s (and IOS 5) There isn't ' anything you can do about it, so you're best bet is to go down to the store and get an exchange. If you have an older iPhone (3gs/4) roll back your update from IOS 5 to IOS 4.
-
I bought my iphone from carephone warehouse, sim free and with no contract. 5 months down the line I had a problem with the phone and I booked a genius appointment, they swapped my phone and gave me a new phone but they locked my phone to tmobile!!! I now do not use tmobile and I have an iphone which is locked to tmobile!!! I bought an unlocked phone and apple have locked it!!! what can i do?
In response to this, Carphone Warehouse (and Phones4U) sell what is commonly referred to as "sim free" handsets - these are not the same as unlocked. Sim free handsets will automatically lock to the first network sim card that the phone is activated with, and that will be permanently. The only way to unlock the handset would be to go through the network (T-Mobile I understand) and request they unlock it for you. More than likely, there will be a charge as you are no longer a T-Mobile customer.
If you ever want to purchase a new unlocked iPhone, the only place you can buy one is from Apple directly. Any other place will most likely sell sim free handsets. -
Migrate from Lightroom 3 to Aperture 3 - Problems with DNG
Hello : )
I will migrate from Lightroom 3 to Aperture 3. I've tested Aperture for a while and I like it, but I have one problem. If I import DNG files, I lost all the settings I've made in Lightroom, except Metadata. Is there any way to import DNG files and get all the settings? If not I think a migration to Aperture will not be possible to me, because I've over 50.000 DNG files and I don't want to convert them to tiff or other formats and lost all the benefits of the RAW files.
Thanks
derRabeLook at the video below- I think it will solve your problem.
http://www.youtube.com/watch?v=7R4HgOZ3oBc -
I just purchased a new Macbook Pro Retina, and I have an old Macbook Pro w/o Retina and wish to use migration assistant. I still want to use the older Macbook Pro and keep all the files on it, but copy them and also put them on my new Macbook. What I'm trying to say is, can I use migration assistant to move files to a new Mac, while keeping the files on the old computer?
You can omit some broad categories, but you can't pick and choose individual items.
See Using Setup Assistant on Mountain Lion or Lion (preferred method), or the similar Using Migration Assistant on Mountain Lion or Lion for the gory details. -
Migrating from NIS to JDS 6.3 - problems with addNISObject
I'm trying (again) to transfer our NIS maps to the LDAP server using the inityp2l command.
This seems to work. It sets up the NISLDAPmapping and the /etc/default/ypserv files, but when I run ypserv -Ir, I get the following errors:
Mar 30 15:45:14 sun34 ypserv[6260]: [ID 473756 user.error] addNISObject: ldapAdd error 32 (No such object) for (dn: dc=starfleet,dc=example,dc=com)
Mar 30 15:45:15 sun34 ypserv[6260]: [ID 473756 user.error] addNISObject: ldapAdd error 32 (No such object) for (dn: dc=com)
Mar 30 15:45:15 sun34 ypserv[6260]: [ID 556977 user.error] addParent: Unable to create parent (dn: dc=com) of (dn: dc=example,dc=com) in the DIT
Mar 30 15:45:15 sun34 ypserv[6260]: [ID 556977 user.error] addParent: Unable to create parent (dn: dc=example,dc=com) of (dn: dc=starfleet,dc=example,dc=com) in the DIT
Mar 30 15:45:15 sun34 ypserv[6260]: [ID 572537 user.error] Could not make nisDomain object for starfleet.example.com
Now, I've looked for the nis attributes in the LDAP server, and I can't find any. Do I have to manually add all of the nisObject classes? I used the ldapsearch command giveni n the following site here.
I still get nothing when I use the following command:
ldapsearch -b cn=schema objectclass=* | grep nisDomainObject Anyway, it looks like the LDAP server instance in JDS 6.3 doesn't include any nis object classes at all. Following the instructions in the documentation results in the errors above.
Interestingly, the errors log has the following entry (which leads me to assume that JDS 6.3 does not include nis object classes):
[30/Mar/2009:13:28:49 +0100] - ERROR<5894> - Schema - conn=10 op=1 msgId=2 - User error: Entry "dc=example,dc=com" has unknown object class "nisDomainObject"
Note that I had to add that objectclass myself.
Any ideas?
Thanks
Edited by: cannonac on 30-Mar-2009 15:53You've done it again. I have to say, I'm new to this but I thought, and the documentation doesn't really give much of a clue, that idsconfig was meant fo iPlanet Directory Server 5.x, not JDS 6.x. That's why I hadn't done anything with it.
Thank you for all the help you've given me with this install. I'd be bald with frustration now if it wasn't for your help.
Andy -
Do I have to reinstall my printer drivers after upgrading to 10.8? I seem to have lost the ability to communicate with either of 2 wireless printers and to download pictures from my camera. (Photoshop keeps telling me it can't find the device.) Any suggestions?
Have you repaired permissions and restarted your computer after installing ML? Checked your printer settings in System Preferences?
If Software Update does not list any updated drivers for your model printer, you should go to the printer's manufacturer website and download the drivers from there and/or contact their tech support to determine if your printer is compatible w/ML.
Read the various Knowledge Base ML printing articles. Here are a few to get you started:
OS X Mountain Lion: If the software for your printer can’t be found
OS X Mountain Lion: Troubleshoot a USB printer
OS X Mountain Lion: Troubleshoot an AirPort printer
If none of the above work, post back w/the model of your printer and how it's connected to your computer. USB? Wireless? -
On a Mac, Just upgraded from Lightroom 4, to 5. Problems with Catalog transfer.
So I did the upgrade version of Lightroom 5 from 4. I did the catalog transfer to move all of my images over from lightroom 4 to 5. But now when I click on any of my old images (from a lightroom 4 catalog) in lightroom 5, I get an error message that says Lighroom has a problem reading the images. Last night I tried to export from lightroom 5 to my desktop and it did not work with the same error message coming up. Help!!! What am I (did I) doing wrong?
-Once I put the disc in I followed the procedures to upload LR5. This was successful. The first time I opened LR5 I was prompted to transfer my old LR4 catalogs to LR5 which I did.
-Now when I click on any image, once I click away, in the lower scroll bar of images an exclamation mark in a small circle. When you click on the exclamation mark this message appears "Lightroom has encountered problems reading this photo. You will not be able to make adjustments to the photo." This happens to every image I click on. -
Cannot access iCloud which started yesterday 4/17/14. No problem with other browers.
I use a bookmark tab to access my iCloud items i.e. calender, contact, notes, etc. Yesterday when I tried to access, I get the "background" of the opening page and nothing else happens. No problem accessing with Chrome or IE. Very annoying as Firefox is my main and preferred browser. Has anyone else experienced this?
Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you. -
I upgraded from design premium cs5.5 to design premium cs6 and am unable to install. I get all the way to where it asks for the serial number of my prior product. Then it complains that the serial number dosent represent an eligible product. The install is on a new machine that has never had the adobe product installed. I unregistered the cs5.5 product on my old machine before trying to install cs0.
Contact serial number support by web chat.
Mylenium -
Windows 2000 upgrade from win98--will i have problems with my pci-7344, pci 6110e & ni5411?
I am running win98 with my Labview 5.1. It running fine, but I would like to upgrade the os to windows 2000.
When I was running a check of the hardware, win2k said that the following hardware may not run:
pci-7344, pci-6110 & ni-5411.
will i need new drivers?
will i run into any problems?
any suggestions?
thanks!
Byron Golden
Allied Geophysical Labs
U of HoustonByron,
You should not have any problems when you upgrade your OS. Depending on what driver versions you have for that hardware, you may want to go ahead an upgrade your drivers anyway, though. The drivers for these devices are all available for free from our website at:
Current Driver Versions
http://digital.ni.com/softlib.nsf/webcategories/9AD71162B755F0E786256BBC005F001A?OpenDocument&node=132060_US
Try that and let me know if you have any trouble.
Regards,
Scott R.
Applications Engineer
National Instruments -
Upgrading from iTunes 4 to iTunes 6 (problem with windows)
hi,
im having trouble with installing the new itunes...
The installation went to plan, but when you try to click on iTunes, windows popup saying "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience." what do i do?
Ive tried uninstalling it and reinstalling the old version but it still wont work...
can you please see if you can help me because i use my iTunes everydayhi Minh Dang!
"iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
the first thing i check for with one of these is a broken quicktime. first see:
b noir, "My itunes won't start" #19, 10:39am Oct 20, 2005 CDT
keep us posted.
love, b
Maybe you are looking for
-
Long text not displayed in outpur of adhoc query
Hi, I am trying to run an ad hoc query in which i need the Org unit long text in the output. When i run i only see the short text of the Org unit.I tried changing the output display option as 'Value and text' and 'text' both but it shows the short te
-
How to disconnect a file sharing client in Mountain Lion?
If mac (e.g., a macbook) is connected to my desktop mac as a file sharing client, how can I dissconnect that macbook without having to turn off file sharing on my desktop machine? I could go back to the macbook and disconnect the shared file from the
-
Displaying different patterns on a label
Hi, I want to display different patterns on a label component , like label with mesh or lable with lines passing diagonally. Is there any way to draw these patterns on a label Thanks
-
If I originally purchased Dreamweaver for Windows, can I download the Mac version? I don't have a PC
I have my original serial number, but I do not have the cds. I need to download new software for my Mac. Since I don't use my Windows version anymore, can I do this?
-
Was on J/ drive and found some files named Tudo.iaplugin, Weibo.iaplugin, YouKu.iaplugin, TencentWeibo.iaplugin, QQ.iaplugin. Wanted to know what these files are and do I need them.