Migrating from other Application Server - security questions

Hello guys,
I am newbie with BEA Weblogic, migrating from JBoss/Tomcat.
I am interested in security techniques used in Weblogic.
For example, how can I configure web auth./protected area with authorisation from SQL (MySQL in my case) database? In JBoss/Tomcat I've used to configure JDBC security realm for Tomcat, but in Weblogic 8.1 I can hardly find such ability to configure such realm. I need to say that I see only one default realm.
I am using Weblogic Server 8.1.
Looking forward any your help, thanks!
If you can share some usefull links/articles - this would be great!
P.S. This just the first question. I have many of them dealing with EJB security... :-)

You can write your own "providers"
There are samples available with instructions at
http://dev2dev.bea.com/codelibrary/code/security_prov81.jsp

Similar Messages

Migration from Oracle application server from Windowsto Solaris

Hi Friends,
I want to migrate Oracle application server from Windows to solaris. Please share the document for this.
Thanks in advance
Anil Pinto

Hi,
I hope we need to install Oracle Applcation server on Solaris and need to compile windows forms in soalris.
Thanks & Regards
Anil Pinto

Migrating from Oracle Application Server or WebSphere to WebLogic Server

Does anyone know of any documentation about migrating applications from WebSphere 6.1 or OAS 10.1.3.3 to WebLogic 10.3tp? I found some old (circa 2005) documents, but I doubt they will help much.
Thanks,
Leona

Please refer to the following url:
http://www.sun.com/migration/sunonetools.html
This should give u a head start on what needs to be done and how,. WIth respect to webserver , i guess you can use it or leave it depending on the architecture you require to deploy your solution.
Hope this helps !

Migrating from Iplanet Application Server 6.0 to SUN ONE App Server 7.0

Hi,
I have an Iplanet App Server 6.0 and Iplanet web server 6.0 I would like to migrate to SUN ONE Appserver 7.0 .
If I am migrating,then can I fit the existing web server(Iplanet 6.0) into SUN ONE or not.
Also I want the migrations cost in detail.

Please refer to the following url:
http://www.sun.com/migration/sunonetools.html
This should give u a head start on what needs to be done and how,. WIth respect to webserver , i guess you can use it or leave it depending on the architecture you require to deploy your solution.
Hope this helps !

Changes in webservices while migrating from Oracle App Server to WebLogic

Dear All,
I am developing webservices for a external users.
I am new to webservices.
We were using Oracle Application server to deploy the webservices.
The architecture was as mentioned below
1) A interface class
2) A Implementation class for the above interface class
Now we are planning to migrate from Oracle application server to Weblogic Application server.
I have few doubts about the migration,
1) Will there be any difference between Oracle specific WSDL and WSDL created by Weblogic ant build command
2) As our external parties are referring our SOAP requests ans responses for their implementation, i am concerned about the changes in the SOAP request and response formats. Will there be changes due to application server change?
Oracle app server - Oracle 10g application server version 9.0.4.0
Weblogic appl server - Weblogic application server version 10.3.0.0

Now after creating the WSDL by Weblogic workshop. The previous request XML is not working.
Can someone help soving the below query.
We are in process of upgrading the Oracle 10g application server version 9.0.4.0 to Weblogic application server version 10.3.0.0. In the old application server we were using axis specific jars to create the WSDL for the webservices. There are so many third party applications which are accessing our webservices, so we can not change the wsdl, clients accessiong the webservices and the corresponding formats of request and response xml messages. So we need to deploy the same wsdl and for the same we need to deploy axis on to weblogic 10.3. Can you please help us regarding the same.
Qns
1 - If we can deploy the axis on to the Weblogic 10.3
2 - Can we use the same WSDL in the Weblogic server too.
3 - If we use the same WSDL, will it help us to keep the client accessing the webservices, the request xml format, response XML format the same as it is with Oracle 10g application server case.
4 - Please share how to deploy axis on to the Weblogic 10.3 application server.
5 - Please share how we can create EARs that can be deployed on the webserver using axis specific jars.
Thanks and Regards
Manoj

Migration from Oracle App Server 10.1.3.5 to WebLogic 12 - Expected issues?

Hi all,
the company I work for wants to migrate its Oracle Application Server 10.1.3.5 (with JRE 1.6) to WebLogic 12 and we need to guess which kind of remediation could be needed to have all web-apps still working.
The concerned applications are using dated technologies:
direct JDBC connections to db
JPA 1.0
connection pools with Oracle JDBC drivers
some apps are compiled with Java 1.4, some others with Java 1.6
servlet 2.3
JSP 2.0
We do not expect to come accross big issues but I'm not skilled on this kind of matters so I would like to receive seggestions or alerts from experts. Any remark will be appreciated.
Thank you all.
Regards,
Luca

Hi Luca,
It would be better if you asked this question in the Application Server forum which should be at this URL -
Application Server
and the general forum here -
Oracle Application Server - General
Regards,
Mike

Calling EJB deployed on Weblogic 10.3 from WebSphere Application Server 6

Hi,
We are trying to call an EJB(2.1) deployed in Weblogic 10.3 from WebSphere Application Server 6.
The problem is that the jars containing Weblogic's initial context factory are compiled with JDK5. (Client jar was built as per [http://download.oracle.com/docs/cd/E15051_01/wls/docs103/client/jarbuilder.html] .)
WebSphere is still running on JDK1.4.
Therefore when trying to get the InitialContext to lookup up the bean we get major/minor version errors because of the compiler level mismatch.
Has anyone faced a scenario like this and come up with a solution?
Are there 1.4 jars for Weblogic 10.3 out there?
Any help?
Thanks

Hi Dan,
Yes I am using EJB 3. I saw this thread earlier also but :
1. In my case I am not calling the EJB 3.0 methods directly. I am using a java client (Cataloged as a Java Class Library) which does the lookup and calls the EJB methods. (I am not cataloging and calling the EJB 3.0 methods directly).
2. It is working perfectly fine when the EJB is deployed in Weblogic 10.0 or 10.2.
I am very much new to this so please bear with my small and silly questions! Thanks a lot for you help !
Cheers !
Rajat

Migration of Oracle Application Server

I want to migrate my Oracle application Server 10g 9.0.4 from RHEL 3.0 U4 to RHEL 3.0 U5. My oracle application server is running a portal application and it is also runnins as webserver. Since the existing setup has some performance issue i want to redeploy the applications again but portal users ( 600 + )created in the existing setup has to be migrated in the new setup.
Please give me some inputs in doing that...
Thanks,
CS

If anybody has any helpful info on this topic, I am looking for the same.... to migrate my Windows-based IAS installation to Linux instead.
There is a backup and recovery function built into the IAS Enterprise Manager, but I am uncertain if cross-platform restores are supported or not.

File from the Application server

Hi gurus,
I am working on a scenario where I need to get a file from the application server and for this I need to ask user to enter the location and that too at the selection screen and then I need to read this location using open data set and read data set in my program , once I am done with this I need to do some other validations. so can you please help me out how to achieve this.
Thanks
Rajeev Gupta

Hi
Declare the selection screen with file as parameter so that the user enter the application server file..
the use the OPEND DATASET as mentioned in below code and process
Refer this:
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures.
*& Report ZUPLOADTAB                                                  *                     &----
*& Example of Uploading tab delimited file                             *
REPORT zuploadtab                    .
PARAMETERS: p_infile LIKE rlgrap-filename
                        OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
    name1 like pa0002-VORNA,
    name2 like pa0002-name2,
    age   type i,
    END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
      wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
      MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
      APPEND wa_upload TO it_record.
    ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
    write:/     sy-vline,
           (10) wa_record-name1, sy-vline,
           (10) wa_record-name2, sy-vline,
           (10) wa_record-age, sy-vline.
endloop.
Regards
Anji

Upload tab-delimited file from the application server to an internal table

Hello SAPients.
I'm using OPEN DATASET..., READ DATASET..., CLOSE DATASET to upload a file from the application server (SunOS). I'm working with SAP 4.6C. I'm trying to upload a tab-delimited file to an internal table but when I try load it the fields are not correctly separated, in fact, they are all misplaced and the table shows '#' where supposedly there was a tab.
I tried to SPLIT the line using as separator a variable with reference to CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB but for some reason that class doesn't exist in my system.
Do you know what I'm doing wrong? or Do you know a better method to upload a tab-delimited file into an internal table?
Thank you in advance for your help.

Try:
REPORT ztest MESSAGE-ID 00.
PARAMETER: p_file LIKE rlgrap-filename   OBLIGATORY.
DATA: BEGIN OF data_tab OCCURS 0,
      data(4096),
      END   OF data_tab.
DATA: BEGIN OF vendor_file_x OCCURS 0.
* LFA1 Data
DATA: mandt LIKE bgr00-mandt,
      lifnr LIKE blf00-lifnr,
      anred LIKE blfa1-anred,
      bahns LIKE blfa1-bahns,
      bbbnr LIKE blfa1-bbbnr,
      bbsnr LIKE blfa1-bbsnr,
      begru LIKE blfa1-begru,
      brsch LIKE blfa1-brsch,
      bubkz LIKE blfa1-bubkz,
      datlt LIKE blfa1-datlt,
      dtams LIKE blfa1-dtams,
      dtaws LIKE blfa1-dtaws,
      erdat LIKE lfa1-erdat,
      ernam LIKE lfa1-ernam,
      esrnr LIKE blfa1-esrnr,
      konzs LIKE blfa1-konzs,
      ktokk LIKE lfa1-ktokk,
      kunnr LIKE blfa1-kunnr,
      land1 LIKE blfa1-land1,
      lnrza LIKE blfa1-lnrza,
      loevm LIKE blfa1-loevm,
      name1 LIKE blfa1-name1,
      name2 LIKE blfa1-name2,
      name3 LIKE blfa1-name3,
      name4 LIKE blfa1-name4,
      ort01 LIKE blfa1-ort01,
      ort02 LIKE blfa1-ort02,
      pfach LIKE blfa1-pfach,
      pstl2 LIKE blfa1-pstl2,
      pstlz LIKE blfa1-pstlz,
      regio LIKE blfa1-regio,
      sortl LIKE blfa1-sortl,
      sperr LIKE blfa1-sperr,
      sperm LIKE blfa1-sperm,
      spras LIKE blfa1-spras,
      stcd1 LIKE blfa1-stcd1,
      stcd2 LIKE blfa1-stcd2,
      stkza LIKE blfa1-stkza,
      stkzu LIKE blfa1-stkzu,
      stras LIKE blfa1-stras,
      telbx LIKE blfa1-telbx,
      telf1 LIKE blfa1-telf1,
      telf2 LIKE blfa1-telf2,
      telfx LIKE blfa1-telfx,
      teltx LIKE blfa1-teltx,
      telx1 LIKE blfa1-telx1,
      xcpdk LIKE lfa1-xcpdk,
      xzemp LIKE blfa1-xzemp,
      vbund LIKE blfa1-vbund,
      fiskn LIKE blfa1-fiskn,
      stceg LIKE blfa1-stceg,
      stkzn LIKE blfa1-stkzn,
      sperq LIKE blfa1-sperq,
      adrnr LIKE lfa1-adrnr,
      mcod1 LIKE lfa1-mcod1,
      mcod2 LIKE lfa1-mcod2,
      mcod3 LIKE lfa1-mcod3,
      gbort LIKE blfa1-gbort,
      gbdat LIKE blfa1-gbdat,
      sexkz LIKE blfa1-sexkz,
      kraus LIKE blfa1-kraus,
      revdb LIKE blfa1-revdb,
      qssys LIKE blfa1-qssys,
      ktock LIKE blfa1-ktock,
      pfort LIKE blfa1-pfort,
      werks LIKE blfa1-werks,
      ltsna LIKE blfa1-ltsna,
      werkr LIKE blfa1-werkr,
      plkal LIKE lfa1-plkal,
      duefl LIKE lfa1-duefl,
      txjcd LIKE blfa1-txjcd,
      sperz LIKE lfa1-sperz,
      scacd LIKE blfa1-scacd,
      sfrgr LIKE blfa1-sfrgr,
      lzone LIKE blfa1-lzone,
      xlfza LIKE lfa1-xlfza,
      dlgrp LIKE blfa1-dlgrp,
      fityp LIKE blfa1-fityp,
      stcdt LIKE blfa1-stcdt,
      regss LIKE blfa1-regss,
      actss LIKE blfa1-actss,
      stcd3 LIKE blfa1-stcd3,
      stcd4 LIKE blfa1-stcd4,
      ipisp LIKE blfa1-ipisp,
      taxbs LIKE blfa1-taxbs,
      profs LIKE blfa1-profs,
      stgdl LIKE blfa1-stgdl,
      emnfr LIKE blfa1-emnfr,
      lfurl LIKE blfa1-lfurl,
      j_1kfrepre LIKE blfa1-j_1kfrepre,
      j_1kftbus   LIKE blfa1-j_1kftbus,
      j_1kftind   LIKE blfa1-j_1kftind,
      confs LIKE lfa1-confs,
      updat LIKE lfa1-updat,
      uptim LIKE lfa1-uptim,
      nodel LIKE blfa1-nodel.
DATA: END   OF vendor_file_x.
FIELD-SYMBOLS: <field>,
                <field_1>.
DATA: delim          TYPE x        VALUE '09'.
DATA: fld_chk(4096),
      last_char,
      quote_1     TYPE i,
      quote_2     TYPE i,
      fld_lth     TYPE i,
      columns     TYPE i,
      field_end   TYPE i,
      outp_rec    TYPE i,
      extras(3)   TYPE c        VALUE '.,"',
      mixed_no(14) TYPE c        VALUE '1234567890-.,"'.
OPEN DATASET p_file FOR INPUT.
DO.
READ DATASET p_file INTO data_tab-data.
IF sy-subrc = 0.
    APPEND data_tab.
ELSE.
    EXIT.
ENDIF.
ENDDO.
* count columns in output structure
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
columns = sy-index.
ENDDO.
* Assign elements of input file to internal table
CLEAR vendor_file_x.
IF columns > 0.
LOOP AT data_tab.
    DO columns TIMES.
      ASSIGN space TO <field>.
      ASSIGN space TO <field_1>.
      ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
      SEARCH data_tab-data FOR delim.
      IF sy-fdpos > 0.
        field_end = sy-fdpos + 1.
        ASSIGN data_tab-data(sy-fdpos) TO <field_1>.
* Check that numeric fields don't contain any embedded " or ,
        IF <field_1> CO mixed_no AND
           <field_1> CA extras.
          TRANSLATE <field_1> USING '" , '.
          CONDENSE <field_1> NO-GAPS.
        ENDIF.
* If first and last characters are '"', remove both.
        fld_chk = <field_1>.
        IF NOT fld_chk IS INITIAL.
          fld_lth = strlen( fld_chk ) - 1.
          MOVE fld_chk+fld_lth(1) TO last_char.
          IF fld_chk(1) = '"' AND
             last_char = '"'.
            MOVE space TO fld_chk+fld_lth(1).
            SHIFT fld_chk.
            MOVE fld_chk TO <field_1>.
          ENDIF.       " for if fld_chk(1)=" & last_char="
        ENDIF.         " for if not fld_chk is initial
* Replace "" with "
        DO.
          IF fld_chk CS '""'.
            quote_1 = sy-fdpos.
            quote_2 = sy-fdpos + 1.
            MOVE fld_chk+quote_2 TO fld_chk+quote_1.
          ELSE.
            MOVE fld_chk TO <field_1>.
            EXIT.
          ENDIF.
        ENDDO.
        <field> = <field_1>.
      ELSE.
        field_end = 1.
      ENDIF.
      SHIFT data_tab-data LEFT BY field_end PLACES.
    ENDDO.
    APPEND vendor_file_x.
    CLEAR vendor_file_x.
ENDLOOP.
ENDIF.
CLEAR   data_tab.
REFRESH data_tab.
FREE    data_tab.
Rob

Complications migrating from Snow Leopard Server to Mountain Lion Server.

I'm migrating from Snow Leopard Server to Mountain Lion Server. The article "OS X Server: Upgrade and migration" (http://support.apple.com/kb/HT5381) says
"Make sure that any DNS or DHCP servers on which your server depends remain running during the upgrade"
This advice is reinforced by the details of the article "OS X Server: Steps to take before upgrading or migrating the Open Directory database" (http://support.apple.com/kb/HT5300).
As the server I'm migrating from provides these services it will need to be running during the migration process. This would seem to limit my options to doing the migration from a Time Machine backup (or, making a seperate clone of the server's drive and connecting it externally to the new box)
My main concern is the seemingly inevitable clash that is going to occur on the network as the new server takes on the roles of the old one - while it is still running.
What are my options here ?
This is my second attempt as on my first try I did the migration from the TM backup with the network down - and none of my local network users or their home directories were migrated, although the settings for the mount points were, but there were no actual directories where they pointed to!
Clear directions on how to procede would be VERY MUCH appreciated
Thank you.

Moving from Snow Leopard to Mountain Lion means first installing the client (non-Server) version of Mountain Lion and then install Server.app this means that for at least part of the process you will not be running DNS, DHCP or Open Directory.
If you are going to end up using the same DNS name and IP address after the change then an approach you could follow would be as follows.
Destroy any Open Directory replicas
Archive your Open Directory Master (to make a backup)
Note down your DNS records in case they get messed up
Export via Workgroup Manager your users, and groups (you might not need this but better safe than sorry), make sure you do not include the diradmin account
Keep a full back of the server (you should always have backups)
Note down your DHCP server settings in case they get messed up
Note down any other service settings
Install Mountain Lion
Install Server.app
Install Workgroup Manager (extra free download)
Run Server.app
Make sure settings for services are as much as possible the same as before
If your lucky that may be all you need to do, otherwise...
Restore Open Directory archive, if your lucky that will be all you need to do, otherwise...
Make new Open Directory Master
Run Workgroup Manager
Import users and groups you previously exported
You will then have to set passwords for each user as these are not preserved via Workgroup Manager export
When I did this, I was also being forced to change all my IP addresses so I had no choice but to use Workgroup Manager to export and import accounts.

When I go to purchase an item from iTunes the wrong security questions show up so I cannot correctly answer them. What can I do to fix this?

When I go to purchase an item from iTunes the wrong security questions show up and I cannot answer them accurately. Also it is now locked. How can I unlock my ID and get the correct security questions?

1) Apple ID: All about Apple ID security questions
If necessary
2) See Here... ask to speak with the Account Security Team...
Apple ID: Contacting Apple for help with Apple ID account security
3) Or Email Here > Apple Support iTunes Store Contact

Re: Migration from Sysbase Adaptive Server 11.5 to Oracle 8.0.6

I had a problem when using Oracle Migration Workbench to migrate a database from Migration from Sybase Adaptive Server 11.5 to Oracle 8.0.6 in NT environment.
It contains only 8 tables.
Firstly, it captured well the source database from Sybase. But It hang on every times when mapping tables in this database to Oracle.
Is there anyone experienced with this problem?
By the way, I would like to know that which way (tool) is the best one to migrate
A system from Sybase Adaptive Server 11.5 to Oracle 8.0.6
Any idea will be very appreciated?
Thanks
null

Thanks very much.
I have sent both the error.log and my repository to [email protected]
Could you please let me know if you have any advice.
John

Migration from MS SQL Server 7.0 to ORACLE 7.3

I am unable to download WorkBench. Does it support the migration from MS SQL Server 7.0 to ORACLE 7.3 anyway.

Actually, I have to do the conversion from MS SQL Server 7.0 to ORACLE 7.3. I am thinking to do migration firt then do the conversion by writing the packages. Is there any other way to do it......
I am unable to download WorkBench. Does it support the migration from MS SQL Server 7.0 to ORACLE 7.3 anyway.

Migrating from MS-SQL Server to Oracle

Hi,
Is there any Java Tool to migrate from MS-SQL Server to Oralce?
(My Organization's data is already stored in MS-SQL Server database, now we want to migrate to Oracle;
is there any easy way to pull data from MS-SQL Server and push into Oracle database)
thanks,

I think u should use a third party help to resolve this problem, i use dbload to solve it when i was migrated my data, it can migrate almost any data, it helps me to convert MSSQL to MYSQL, MS access to MSSQL, mysql, csv loader, foxpro and MSSQL to MS access, MYSQl, CSV, foxpro etc. i found it on google search.
Download Free : http://www.dbload.com

Migrating from other Application Server - security questions

Similar Messages

Maybe you are looking for