Migrating When the Currently Active Host is Unavailable 8.1

This requirement that you take the server off the network and remove it
          from the disk seems short sighted. Yes in the world of low cost
          hardware you would most likely only run one managed server per physical
          box however in our environment we are going to have two.
          What happens if its a jvm crash then if we take the box offline we lose
          functionality in our remaining jvm which is running. For us we have two
          special purpose jvms and its possible for one to abnormally terminate
          and we need to migrate services to another box in the cluster while the
          2nd one is fine.
          Is there a workaround to this approach to start a managed server and
          tell it to ignore its cache or a way to clean the cache up for a
          specific server while the physical box is up?
          I am opening a support case with you folks on this one. However if
          anyone out there has any experience running multiple managed servers on
          the same box and each one may need to be migrated please chime in.
          Oh and our business folks want us to do it this way since they dont want
          a bug in one subsytem bringing down the other etc.
          Larry

Please take a look at the article below to see whether that helps.
http://dev2dev.bea.com/technologies/soa/xmlmessaging/articles/ClusteredJMS.jsp

Similar Messages

How to Fix: Error (10698) The virtual machine () could not be live migrated to the virtual machine host () using this cluster configuration.

I am unable to live migrate via SCVMM 2012 R2 to one Host in our 5 node cluster. The job fails with the errors below.
Error (10698)
The virtual machine () could not be live migrated to the virtual machine host () using this cluster configuration.
Recommended Action
Check the cluster configuration and then try the operation again.
Information (11037)
There currently are no network adapters with network optimization available on host.
The host properties indicate network optimization is available as indicated in the screen shot below.
Any guidance on things to check is appreciated.
Thanks,
Glenn

Here is a snippet of the cluster log when from the current VM owner node of the failed migration:
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RHS] Resource Virtual Machine Configuration VMNameHere called SetResourceLockedMode. LockedModeEnabled0, LockedModeReason0.
00000b6c.00001a9c::2014/02/03-13:16:07.495 INFO [RCM] HandleMonitorReply: LOCKEDMODE for 'Virtual Machine Configuration VMNameHere', gen(0) result 0/0.
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RHS] Resource Virtual Machine VMNameHere called SetResourceLockedMode. LockedModeEnabled0, LockedModeReason0.
00000b6c.00001a9c::2014/02/03-13:16:07.495 INFO [RCM] HandleMonitorReply: LOCKEDMODE for 'Virtual Machine VMNameHere', gen(0) result 0/0.
00000b6c.00001a9c::2014/02/03-13:16:07.495 INFO [RCM] HandleMonitorReply: INMEMORY_NODELOCAL_PROPERTIES for 'Virtual Machine VMNameHere', gen(0) result 0/0.
00000b6c.000020ec::2014/02/03-13:16:07.495 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine Configuration <Virtual Machine Configuration VMNameHere>: Current state 'MigrationSrcWaitForOffline', event 'MigrationSrcCompleted', result 0x8007274d
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine Configuration <Virtual Machine Configuration VMNameHere>: State change 'MigrationSrcWaitForOffline' -> 'Online'
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine <Virtual Machine VMNameHere>: Current state 'MigrationSrcOfflinePending', event 'MigrationSrcCompleted', result 0x8007274d
00000e50.000025c0::2014/02/03-13:16:07.495 INFO [RES] Virtual Machine <Virtual Machine VMNameHere>: State change 'MigrationSrcOfflinePending' -> 'Online'
00000e50.00002080::2014/02/03-13:16:07.510 ERR   [RES] Virtual Machine <Virtual Machine VMNameHere>: Live migration of 'Virtual Machine VMNameHere' failed.
Virtual machine migration operation for 'VMNameHere' failed at migration source 'SourceHostNameHere'. (Virtual machine ID 6901D5F8-B759-4557-8A28-E36173A14443)
The Virtual Machine Management Service failed to establish a connection for a Virtual Machine migration with host 'DestinationHostNameHere': No connection could be made because the tar
00000e50.00002080::2014/02/03-13:16:07.510 ERR   [RHS] Resource Virtual Machine VMNameHere has cancelled offline with error code 10061.
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] HandleMonitorReply: OFFLINERESOURCE for 'Virtual Machine VMNameHere', gen(0) result 0/10061.
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] Res Virtual Machine VMNameHere: OfflinePending -> Online( StateUnknown )
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] TransitionToState(Virtual Machine VMNameHere) OfflinePending-->Online.
00000b6c.00001a9c::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] rcm::QueuedMovesHolder::VetoOffline: (VMNameHere with flags 0)
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] rcm::QueuedMovesHolder::RemoveGroup: (VMNameHere) GroupBeingMoved: false AllowMoveCancel: true NotifyMoveFailure: true
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] VMNameHere: Removed Flags 4 from StatusInformation. New StatusInformation 0
00000b6c.000020ec::2014/02/03-13:16:07.510 INFO [RCM] rcm::RcmGroup::CancelClusterGroupOperation: (VMNameHere)
00000b6c.00001a9c::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000021a8::2014/02/03-13:16:07.510 INFO [GUM] Node 3: executing request locally, gumId:3951, my action: /dm/update, # of updates: 1
00000b6c.000021a8::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.00001a9c::2014/02/03-13:16:07.510 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000022a0::2014/02/03-13:16:07.510 INFO [RCM] moved 0 tasks from staging set to task set. TaskSetSize=0
00000b6c.000022a0::2014/02/03-13:16:07.510 INFO [RCM] rcm::RcmPriorityManager::StartGroups: [RCM] done, executed 0 tasks
00000b6c.00000dd8::2014/02/03-13:16:07.510 INFO [RCM] ignored non-local state Online for group VMNameHere
00000b6c.000021a8::2014/02/03-13:16:07.526 INFO [GUM] Node 3: executing request locally, gumId:3952, my action: /dm/update, # of updates: 1
00000b6c.000021a8::2014/02/03-13:16:07.526 INFO [GEM] Node 3: Sending 1 messages as a batched GEM message
00000b6c.000018e4::2014/02/03-13:16:07.526 INFO [RCM] HandleMonitorReply: INMEMORY_NODELOCAL_PROPERTIES for 'Virtual Machine VMNameHere', gen(0) result 0/0.
No entry is made on the cluster log of the destination node.
To me this means the nodes cannot talk to each other, but I don’t know why.
They are on the same domain. Their server names resolve properly and they can ping eachother both by name and IP.

Restart current song while iTunes is not the current active app

In prior iTunes 11 / Mtn. Lion when using an Apple keyboard the F7 key when pressed would re-start a song that was playing with one press, and go to the previous with 2. This functionality has changed so that now it will go to the previous track with one press.
Is there a way to change the functionaly back or, add a separate key command that allows me to restart the current song when iTunes is not the currently active app?
Thanks!

I have a SteelSeries Shift keyboard, and experienced the same problem after updating to 10.4.
Found this little piece of software to fix the problem for me:
http://code.google.com/p/hktunes/
It's not ideal, as it has to run in the system tray in order to work, but it's way better than being without the functionality of the hotkeys, untill the problem is fixed.
Hope this works for you guys as well!

How can I automatically have a new tab always be a copy of the current active tab?

The add-on extension "NewTabURL" (by "sogame") provided the option I want and used for a number of years. But it stopped working when Firefox was updated to version 16.0. When I click for a new tab, all I get is a completely blank tab. How can I automatically have the new tab always be a copy of the current active tab?
Can the extension "NewTabURL" be revised to work in version 16 and/or version 17? If not, how else can I get the new tab functionality that I desire? I can't seem to find any other extension that provides that functionality.
Milt Beychok

My trackball has 4 buttons and a scroll wheel. Each of the 4 buttons is programmable. The 4 buttons are normally pre-programmed for single-click, double-click, drag and right-click by simply pressing on them
Each of the 4 buttons may be programmed to also have other functions. For example, I programmed "control/single-click" to produce a middle click. I could also have used "shift/single-click" or "alt/single-click" to produce the middle-click. Or I could have similarly programmed double-click or drag or right-click. The Kensington Expert Mouse is quite versatile ... once you get the hang of programming it.
I have had it for about 4 years and I had never had the need to program one of them until you told me about using a middle-click.
Milt Beychok

JavaScript: How do you pass the currently active doc to a dialog in a menu item?

I'm using Adobe Acrobat 11.0 Standard on Windows 7, and I'm having trouble with the menu item that I'm creating. The menu item calls a dialog that prompts the user to select a page in the currently active document. The problem is, I can't figure out how to pass the currently active document to the dialog. I scoured the rest of the documentation, did searches on Google and here in the Adobe forums, but haven't turned anything up. The AcroJS API gives the following solution (found under app/methods/execDialog):
This function attaches the Doc object to the dialog box, then passes the dialog box to the app.execDialog method. The dialog4 object and this function can be at the document level.
   function dotheDialog(dialog,doc)
        dialog.doc = doc;
        var retn = app.execDialog( dialog )
Finally, the following script can be executed from a mouse-up action, for example.
    dotheDialog( dialog4, this );
I did this exact thing, but in the dialog, the value of this.numPages still comes out as undefined, indicating that the current document still hasn't been passed. My own code looks like this:
function dotheDialog(dialog, thisDoc){
    dialog.doc = thisDoc;
    var retn = app.execDialog(dialog);
app.addMenuItem({
    cName: "Test Dialogue Box",
    cParent: "Edit",
    cExec: "dotheDialog(templateDialogue, this);"
where templateDialogue is the name of my own dialog, rather than dialog4. I'm not sure what the retn variable that they declare in the documentation is for, but I've tried it with and without that part, and it doesn't seem to make a difference. Does anyone know how to do this?

Sorry, here it is. It's also just a small modification of something directly from the API, which is why it still has the date bit in it.
var templateDialogue = {
initialize: function (dialog) {
    // Create a static text containing the current date.
    var todayDate = dialog.store()["date"];
    todayDate = "Date: " + util.printd("mmmm dd, yyyy", new Date());
    dialog.load({ "date": todayDate });
commit:function (dialog) {    // called when OK pressed
    var results = dialog.store();
    var inBounds = (parseInt(results["tPag"]) < this.numPages);
    if(!inBounds){
      app.alert({
        cMsg: "Please enter a valid number for the page from which to make the template." +
        "\n" + parseInt(results['tPag']) + " = parseInt(results['tPag']) !< this.numPages = " + // I put this in to see the value of this.numPages,
        this.numPages,                                                                           // and it continues to be undefined.
        cTitle: "Page out of Bounds",
        nIcon: 0, nType: 0
    }else{
      var nButton = app.alert({
        cMsg: "Your template is named " + results["tNam"] + " and is made from page " + results["tPag"],
        cTitle: "javascript",
        nIcon: 3, cType: 0
description:    {
    name: "Personal Data",    // Dialog box title
    align_children: "align_left",
    width: 350,
    height: 200,
    elements:
        type: "cluster",
        name: "Add a page to this documents templates.",
        align_children: "align_left",
        elements:
            type: "view",
            align_children: "align_row",
            elements:
                type: "static_text",
                name: "Template Name: "
                item_id: "tNam",
                type: "edit_text",
                alignment: "align_fill",
                width: 300,
                height: 20
            type: "view",
            align_children: "align_row",
            elements:
                type: "static_text",
                name: "Generating Page: "
                item_id: "tPag",
                type: "edit_text",
                alignment: "align_fill",
                width: 300,
                height: 20
            type: "static_text",
            name: "Date: ",
            char_width: 25,
            item_id: "date"
        alignment: "align_right",
        type: "ok_cancel",
        ok_name: "Ok",
        cancel_name: "Cancel"
Side Question: Out of curiosity, how would you abort if the user clicks cancel? I get the feeling that they don't cover it because it's something you're supposed to already know how to do, but...I don't. Would you just put whatever action you want to take into an if ( button == "Ok" ) type statement so that cancel does nothing?

Error message: File can't be opened right now because it's being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.

I recently transferred some data from my external hard drive to my desktop, but there was an error transferring some of the files and it couldn't respond, and eventually i simply removed the external hard drive. However, the folder/files are still on my desktop, and when i try to move them or delete them, this error message appears:
“-folder/file name-” can’t be opened right now because it’s being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.
Since I removed the external hard drive before the files were finished transferring, there is no way for the current task to be completed. How can I resolve this and delete the folders/files from my desktop?

I just managed to resolve this by going to the apple sign in the top left, choosing force quit (or you could do option+command+esc), then i chose finder, and i clicked relaunch. After relaunching finder, the error message doesn't appear anymore, and I could move these files/folders, and delete them just fine.
Hope this will help other people who encounter similar problems in the future!

Suggestions to find the current active fields in debugging mode

Hi All,
I need to validate a particular entry in the screen in a particular subroutine(inside a user exit). I know the field gets populated but do not know which field is that, is there a way to know the current active fields in the debugging mode.
Regards,
Karthik

Hi,
You can create dynamic types and data for those types are run time.
lets assume that you have structure of some type and you have work area of that type.
DATA: lv_data type SPFLI.
DATA: lr_rtti_struc TYPE REF TO cl_abap_structdescr.
DATA: lt_comp       TYPE cl_abap_structdescr=>component_table.
DATA: ls_comp       LIKE LINE OF lt_comp.
DATA: lr_data       TYPE REF TO data.
FIELD-SYMBOLS: <fs_data> TYPE ANY.
    lr_rtti_struc ?= cl_abap_structdescr=>describe_by_data( lv_data ).
    lt_comp = lr_rtti_struc->get_components( ).
"Now lets remove two fileds from the table as follows.
LOOP AT lt_comp into ls_comp.
DELETE lt_comp INDEX sy-tabix.
IF sy-tabix = 2.
EXIT. " Delete two components of the structure now lt_comp as two components less from SPFLI
ENDIF.
ENDLOOP.
    CALL METHOD cl_abap_structdescr=>create
      EXPORTING
        p_components = lt_comp
        p_strict     = abap_false
      RECEIVING
        p_result     = lr_rtti_struc.
CREATE DATA lr_data TYPE HANDLE lr_rtti_struc. "Now you have data of the new type
    ASSIGN lr_data->* TO <fs_data>.
    CREATE DATA lr_table LIKE STANDARD TABLE OF <fs_data>.
    ASSIGN lr_table->* TO <fs_table>.
Regards,
Sesh

After the currently active tab is closed, can the previously acitve tab be automatically displayed?

After the currently active tab is closed, I don't want to see the tab on its right or on its left. I want to see the tab that was active before the closed one, whatever its position is on the tab strip.
Can that be achieved?

My trackball has 4 buttons and a scroll wheel. Each of the 4 buttons is programmable. The 4 buttons are normally pre-programmed for single-click, double-click, drag and right-click by simply pressing on them
Each of the 4 buttons may be programmed to also have other functions. For example, I programmed "control/single-click" to produce a middle click. I could also have used "shift/single-click" or "alt/single-click" to produce the middle-click. Or I could have similarly programmed double-click or drag or right-click. The Kensington Expert Mouse is quite versatile ... once you get the hang of programming it.
I have had it for about 4 years and I had never had the need to program one of them until you told me about using a middle-click.
Milt Beychok

Script to find the currently active sql

hey,
Can somebody post me a script to find the currently active sql in the database ???

Hi,
You can try these below:
select s.username
       c1,t.sql_text
from v$session s, v$sqltext t
where
s.sql_address = t.address and
s.sql_hash_value = t.hash_value and
s.username is not null
order by s.username,s.prev_sql_addr,s.prev_hash_value,t.piece;
or
select sesion.sid,
       sesion.serial#,
       sesion.username,
       sesion.sql_id,
       sesion.sql_child_number,
       optimizer_mode,
       hash_value,
       address,
       sql_text
from v$sqlarea sqlarea, v$session sesion
where sesion.sql_hash_value = sqlarea.hash_value
   and sesion.sql_address    = sqlarea.address
   and sesion.username is not nullCheers

When the current toolbar is touched previous toolbar items are activated.

I have a UIToolBar *toolbar1. I have 3 buttons on the toolbar. And the tool bar is at the bottom of the view.
The buttons are like library button, moreApps button, recordVideo button. If I touch the library button a new view(a UITableViewController) appears. I used presentModelViewController for it. If I touch moreApps button a new view (a UIViewController) appears and it loaded from http//. The recordButton touch gives another UIViewController view.
When the moreApps button is touched and the view is loaded, it have the content from web and a UIToolBar *toolbar2 at the bottom the view. It has a refresh button and done button.
The problem is when I touch the toolbar2 (not on the refresh button and done button) the previous views button are activated and corresponding views of previous buttons(library button, playVideo button) are loaded. I am not able to understand about this problem.
Thank you.

Try: [/questions/790833]

Rename the current active file?

I'm wanting a script to be able to rename open Photoshop files, if possible.
I cobbled this together from an existing script:
tell application "Adobe Photoshop CS5"
activate
          set old_name to name of current document
          set dialog_result to display dialog ¬
                    "Rename active document:" default answer (old_name) ¬
                    buttons {"Cancel", "Rename"} default button 2 ¬
with icon note
          if button returned of dialog_result = "Rename" then
                    set new_name to text returned of dialog_result
                    set d to properties of current document
                    if path of d is equal to missing value then
                              set name of current document to new_name
                    else
                              tell me to set the_file to POSIX file (d's path as text) as alias
                              tell application "Finder"
                                        set name of the_file to new_name
                              end tell
                    end if
          end if
end tell
If I run it it shows the dialogue window, but when I enter the new name and hit Return it throws out lots of errors.
Is something like this possible?

As Chris wrote Photoshop is not a File Editor. Photoshop edits Photoshop Documents the current Document may or may not have a file on the system created fron the active document. If if does have a file assocatation I sure with scripting you can perform file operations on the file like delete, rename, move etc. However the will not change the active document name. Basicly document name is read only.... well sort of read only for if the current document does not have a file assocation and you save it into you file system The docoument becomes assocated with a file and Photoshop will change the active document name. Aslo when you open a RAW file through ACR the inage image window or tab may show something like imagename.cr2 there is not actually a file associated with the document for Photoshop can not save a Camera RAW file so if you save it as PSD or TiFF the window or tab will now show the file assocation imagename.psd|tif not .cr2. The document name does not always change with a save for if you save the PSD as a jpeg after the jpeg images is saved the document reverts back to its layered and color depth state and is still imagename.psd. There is no active document associated with that saved jpeg file. You can open it and have two document open that look the same one being layered a and perhaps 16bit and the other flat and 8bit.

To know the currently active objects

Hi all,
I am facing a problem to know the number of active objects in the JVM for the currently running java application.
I mean iwant to know when they are destroyed and how much memory they are consuming while they are in the heap.
Also i want to know their references.
Can any one suggest me a way to achieve this objective?
Thanks in advance.
Pravat.

Hi,
Just for information, you can perform join with V$SQLTEXT too
select s.username c1, t.sql_text from
v$session s, v$sqltext t
where
s.sql_address = t.address and
s.sql_hash_value = t.hash_value and
s.username is not null
order by s.username, s.prev_sql_addr,s.prev_hash_value, t.piece;Cheers

Get the current active monitor handle in multi monitor environment

Hi,
I have a requirement to get the HMONITOR handle of the active monitor in multi monitor environment.
i.e; Get the HMONITOR of the currently selected monitor
Thanks in advance

Hi Chris Lewis,
Thanks for quick reply.
I'm referring to the monitor, where a window is invoked
I want to identify from which monitor, my window was invoked, so that I can create and show the window in that monitor.
I had already tried using MonitorFromWindow(). But it always give primary monitor handle.
My Code:
HMONITOR hMonitor = ::MonitorFromWindow(myMainFrame->GetSafeHwnd(), MONITOR_DEFAULTTONEAREST);
hMonitor always refers to Primary monitor, though window is invoked from Secondary monitor.
Thanks in advance

SetRegion does not update the region when the current one is slightly diff.

I'm working on some iPhone MapKit code which fires off some events when the boundaries of the map change (basically some queries to an external server). There is one edge case I can't seem to solve. When users enter a new address I use setRegion to zoom in on that location and afterwards I compute the bounds of the map and query my external server with those coordinates. I always call setRegion however, there is one edge case when it will not fire. That, is, when a user magically happens to select the exact same address that lies at the current center of the map, when that map is zoomed to exactly the same region. Of course this possibility is rare but it is easy achievable in code.
This would be the equivalent of allowing the user to drop a pin at the center of the current map and fire off a query to my server based on that. Unfortunately because the code logic depends on the region changing (which I've done so that users can easily pan around the map and not have to explicitly press a refresh button), I need a work around. How can I know when setRegion has been called but it won't fire regionWillChange / regionDidChange. Can I override the function some how?
As a work around I tried to detect when the region wouldn't change by writing code just before I set the region to compare the new region's center coordinates and span values to that of the current map region's.
Unfortunately when I set the search Location to be the center of the current map I get the following results:
diff in latitude of center 0.000000
diff in longitude of center 0.000016
diff in latitude span -0.000000
diff in longitude span 0.000000
In different cases the error is slightly different but generally speaking even when the region is slightly different like this setRegion or morever, regionDidChange, do not fire. Can anyone explain why? Or how I could go about detecting this properly. Note: I also tried with mapView.centerCoordinate but I get similar errors, and I only want to know when the region will NOT change (if the centerCoordinate is the same the zoom level / region can still be different).

I realized the code was not included. That should make my question clearer
CLLocation *centerOfMap = [[CLLocation alloc] initWithLatitude:mapView.centerCoordinate.latitude longitude:mapView.centerCoordinate.longitude];
mySearchLocation.searchLocation = centerOfMap;
//Recenter and zoom map in on search location
MKCoordinateRegion region = {{0.0f, 0.0f}, {0.0f, 0.0f}};
region.center = mySearchLocation.searchLocation.coordinate;region.span.longitudeDelta = 0.01f;
region.span.latitudeDelta = 0.01f;
[self.mapView setRegion:region animated:YES];
And:
//Recenter and zoom map in on search location
MKCoordinateRegion region = {{0.0f, 0.0f}, {0.0f, 0.0f}};
region.center = mySearchLocation.searchLocation.coordinate;
region.span.longitudeDelta = 0.01f;
region.span.latitudeDelta = 0.01f;
region = [mapView regionThatFits:region]; //Not sure if this is necessary
NSLog(@"diff in latitude of center %f", (mapView.region.center.latitude - region.center.latitude));
NSLog(@"diff in longitude of center %f", (mapView.region.center.longitude - region.center.longitude));
NSLog(@"diff in latitude span %f", (mapView.region.span.latitudeDelta - region.span.latitudeDelta));
NSLog(@"diff in longitude span %f", (mapView.region.span.longitudeDelta - region.span.longitudeDelta));
[self.mapView setRegion:region animated:YES];

The next screen's audio starts playing when the current screens audio has finished

So I've added audio to a few screens and on the first couple it works fine. I have added a mute button and that's all, I just want the audio to play to the end then stop on each screen. It does that perfectly on the first few screens and then at a certain point, when the audio for that screen has finished, it plays the audio for the next screen, and the next, and so on even though I haven't moved on. I can't work out why it's doing this! Sure someone can explain what I've done wrong. Using Captivate 8.0.1...

I adjusted them on one screen and it worked - you've solved my problem again - Thank you!
Is there a way I can make my audio files load up like this automatically?

Migrating When the Currently Active Host is Unavailable 8.1

Similar Messages

Maybe you are looking for