Migration CC and FF data from Virsa 4.0 to GRC 10.1 Data Inconsistency

Hello Guru's
We have done Migration from VIRSA 4.0 Compliance Calibrator (CC) and Firefighter (FF) data from to GRCAC 10.1 system.
After Migration, data inconsistency is coming while validation.
Followed standard sap migration guide virsa 4.0 to 10.0
Patch level - GRC AC 10.1 system
SAP_BASIS
740
0008
SAPKB74008
0000
@6H\QAchieved with Support Package@
SAP Basis Component
SAP_ABA
740
0008
SAPKA74008
0000
@6H\QAchieved with Support Package@
Cross-Application Component
SAP_GWFND
740
0008
SAPK-74008INSAPGWFND
0000
@6H\QAchieved with Support Package@
SAP Gateway Foundation 7.40
SAP_UI
740
0010
SAPK-74010INSAPUI
0000
@6H\QAchieved with Support Package@
User Interface Technology 7.40
PI_BASIS
740
0008
SAPK-74008INPIBASIS
0000
@6H\QAchieved with Support Package@
Basis Plug-In
ST-PI
740
0000
0000
SAP Solution Tools Plug-In
SAP_BW
740
0008
SAPKW74008
0000
@6H\QAchieved with Support Package@
SAP Business Warehouse
GRCFND_A
V1100
0006
SAPK-V1106INGRCFNDA
0000
@6H\QAchieved with Support Package@
GRC Foundation ABAP
GRCPINW
V1100_731
0006
SAPK-11506INGRCPINW
0000
@6H\QAchieved with Support Package@
SAP GRC NetWeaver Plug-In
IW_FNDGC
100
0002
SAPK-10002INIWFNDGC
0000
@6H\QAchieved with Support Package@
SAP IW FNDGC 100
WEBCUIF
747
0005
SAPK-74705INWEBCUIF
0000
@6H\QAchieved with Support Package@
SAP Web UI Framework
IW_CBS
200
0009
SAPK-20009INIWCBS
0000
@6H\QAchieved with Support Package@
SAP IW CBS 200
IW_CNT
200
0009
SAPK-20009INIWCNT
0000
@6H\QAchieved with Support Package@
SAP IW CNT 200
IW_SCS
200
0009
SAPK-20009INIWSCS
0000
@6H\QAchieved with Support Package@
Screen Scraping
POASBC
100_731
0001
SAPK-10201INPOASBC
0000
@6H\QAchieved with Support Package@
POA Shared Business Components
Patch level VIRSA 4.0 system
GRCPINW
V1100_731
0008
SAPK-11508INGRCPINW
SAP GRC NetWeaver Plug-In
Kindly let us know after migration, any sap notes need to install.
Regards,
karunakar

Hello Prasant,
We have migrated VIRSA 4 0 to GRC 10.1 system, after migration we have below issues.
1. In table GRACSODRISK (not able to see the medium risk, but in NWBC screen (Access Risks) we are seeing the medium risks.
2. In Function Permission.txt file ( only AND is coming for all, but some OR is avaiable in VIRSA 4 0 system.
And for gap (it automatically taken AND
Example:
AM02
FB02
F_BKPF_BED
ACTVT
2
AND
0
AM02
FB02
F_BKPF_BED
ACTVT
3
AND
1
AM02
FB02
F_BKPF_BED
BRGRU
AND
1
AM02
FB02
F_BKPF_BEK
ACTVT
2
AND
0
AM02
FB02
F_BKPF_BEK
ACTVT
3
AND
1
AM02
FB02
F_BKPF_BEK
BRGRU
AND
1
kindly suggest.
Regards,
Karunakar

Similar Messages

We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation approvers and controllers got migrated but we are not able to map new mitigation approver and controller to the mitigation ids.

Hello All,
We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation
approvers and controllers got migrated but we are not able to map new
mitigation approver and controller to the mitigation ids.
The steps we have done below.
1. We have created user id in su01 with necessary authorizations
2. we have declared this user id in Access control owners as a
mitigation approver and assigned to the organization unit
Now we are trying to map to newly created mitigation approver to the
mitigation id but we are not able to find that approver id for the mitigation ids. (only old mitigation ids came from VIRSA only we are able to see, not able to add new mitigation approvers / controllers to the mitigation ids)
Kindly check this issue, this is very critical for us.
Thanks in advance.
Regards,
Karunakar

Hi Karunakar,
- Assign Owners to Organization unit
- Make these owners as Mitigation Approver and Monitor
- Create Mitigation Id in this Org. unit
Regards
plaban

Migration from VIRSA 4.0 to GRC 10.0 (ARA)

Hi Guys,
We've just migrated from VIRSA 4.0 to GRC 10.0. We have only two connectors configured ECC and Finace System.
Rules have been generated and we're using the standard "global" ruleset. The rules seem to be generated successfully ( I've checked in the NWBC that the permissions appear after the risk generation and also I've checked some tables like GRACSYSRULE and GRACACTRULE and risks appear there).
When running a risk analysis report at user level in both the system VIRSA 4.0 and GRC 10.0 the no. of conflicts matches where as no. of mitigation doesnot match.Due to this mis-match we are not in a position to go 100% LIVE with GRC and decommisioning VIRSA. We use concept of mitigated roles and not users. Raised the concern with SAP too 2 weeks back and no luck yet.
Does anyone faced a similar issue? can you give me some light in order to solve the issue?
Many Thanks!
Ratan Roy

Hi Andrzej,
Thanks for the reply.
I have one more simple question: how can I change the Violation or Mitigation counts to any RISK Ids?
Say for example:I wanted to make changes in violation and mitigation counts in below mentioned risk.
Access Risk ID
Risk Description
No. of Conflict
No. of Mitigation
SOD Object
F020
Open closed periods previously enter incoming payments
72
45

Migrate tables and stored proc from SQLServer 2005 Express to Oracle10G

How to migrate tables and stored procedures from SQLServer 2005 Express to Oracle10G using SQLDeveloper? thank you very much

Using Oracle SQL Developer Migration Workbench
http://www.oracle.com/technology/tech/migration/workbench/index_sqldev_omwb.html

TS4036 I added Icloud to join my calendar to another person. It erased all history date from previous months. how do I get that data back?

I added Icloud to join my calendar on my phone to another person. It erased all history date from previous months. how do I get that data back?

i found the answer to the first part: reboot and keep hold of command+r
this gave me a list of options
one of them was to reinstall lion from fresh
i went for this
dont know why... but all forum posts i read said u should delete hard disc? theres an option for this
which is the right option?
any suggesstion where i go to register new mac would be great
thanks

When we synch data from AD to FIM Portal 2010 r2 the data is not updates in FIM Portal.

Hi,
When we synch data from AD to FIM Portal 2010 r2 the data is not updates in FIM Portal.
Active directory attribute co have value vietnam but in FIM Portal country attribute have value VIET NAM
we simply mapped AD Attribite to FIM Attribute for inbound
co===>country
why this happen
Regards
Anil Kumar

Anil, please check what do you have in metaverse. It seems that you have attribute flow precedence configured in a way that doesn't export to FIM Portal.
Let's say you have flows like:
(AD MA)
Import flow: (AD) description -> (metaverse) description
(FIM MA)
Import flow (FIM) description -> (metaverse) description
Export flow (FIM) description <- (metaverse) description
And you have higher precedence from FIM. Then, you would never have FIM value updated - even if value in AD changes. It would be exported to FIM only when you don't have this attribute filled in FIM.
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

How is the best way to read data from an iphone if you lost your itunes data after a crash?

How is the best way to read data from an iphone if you lost your itunes data after a crash?

How is the best way to read data from an iphone if you lost your itunes data after a crash?

How to load the data from informatica into bw & how to report the data

Hi friends,
how to load the data from informatica into bw & how to report the data
using cognos.(i.e how to access the data in sap bw using cognos 8 BI suite).
Thanks,
madhu.

Inorder to report BW data into Cognos you can extract data from using Open Hub to the DB table from which Cognos reads.
For BW informatic integration refer following docs:
http://www.aman.co.il/aman/pfd/DataInteg_BR.q103cd.pdf.pdf
http://h71028.www7.hp.com/enterprise/cache/3889-0-0-225-121.html
http://devnet.informatica.com/learning/ePresentations.asp
http://72.14.203.104/search?q=cache:C741L86Q19oJ:devnet.informatica.com/showcase/resources/Essbase_DataSheet.pdfinformaticapowerconnect(BI)&hl=en&gl=in&ct=clnk&cd=3
http://www.informatica.com/customers/utilities_energy/fpl_group.htm
http://www.informatica.com/solutions/resource_center/technote_sapbw_65241004.pdf#search=%22Informatica%20to%20Bw%22

Effort required to upgrade from VIRSA 4.0 to GRC 5.3

Dear SAP Experts,
Any body knows what is the effort required forupgrading VIRSA 4.0 to GRC 5.3.
Regards
Prasanth

Hi Prasanth,
that depends on two factors:
- extent of customization in your 4.0 installation
- experience with 5.3
If all you need to do is convert your existing data for risk analysis and mitigations into 5.3, the purely technical stuff can be done in one or two days.
I would recommend starting with a thorough examination of 5.3 features, though, and come up with a scope & plan for the upgrade. 5.3 offers A LOT more than 4.0 did, and you might want to take the opportunity and use that.
Then of course there's 10.0 which might also be an option, as it does not require you to change the platform from ABAP to Java...
Frank.

Regarding: Loading data from R/3 To BI for a Generic Data source

Hi Every,
Need Help Urgent
I had created a Generic data source with function Module as the data source, in Rsa3 it is working fine.
1-> I had replicated the data source to Bi then i had created a info package and then I executed the same. when it is getting the data and it is show in the request monitor (Number of records ) but the status is not changing from Yellow to Green.
Status in Step by step analysis is every step is green Except "Data selection successfully finished ?" (RED)
2-> Then I had seen the Back ground job in Source system which is executing still. I waited for it for a long time but nearly 30 min.
(I had done Steps one and 2 number of time by activating replicating the data source and so on, but still their is no change in it)
3-> Then I had canceled that back ground job with the help of BASIS (as i feel that it is something going wrong).
4-> I feel that their is some thing wrong in the Code of Extractor.
Please Help...............
""Local Interface:
*" IMPORTING
*"     VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*"     VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*"     VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*"     VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*"     VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*"     VALUE(I_REMOTE_CALL) TYPE SBIWA_FLAG DEFAULT SBIWA_C_FLAG_OFF
*" TABLES
*"      I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*"      I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*"      E_T_DATA STRUCTURE ZBI_MATGRIR OPTIONAL
*Need to get the data only for two Gl account which are fro material purchase while MIGO
*G/L Account Numbers: 0010502001 0010502002
data: E_T_DATA1 type table of ZBI_MATGRIR.
RANGES: R_BUKRS FOR BSIS-BUKRS,
          R_BUDAT FOR BSIS-BUDAT,
          R_GJAHR FOR BSIS-GJAHR,
          R_HKONT FOR BSIS-HKONT.
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
           S_COUNTER_DATAPAKID LIKE SY-TABIX,
           S_CURSOR TYPE CURSOR.
*Declare
TYPES: BEGIN OF TY_FAGL,
    RBURS TYPE FAGLFLEXA-RBUKRS,
    RYEAR TYPE FAGLFLEXA-RYEAR,
    DOCNR TYPE FAGLFLEXA-DOCNR,
    BUZEI TYPE FAGLFLEXA-BUZEI,
    DOCLN TYPE FAGLFLEXA-DOCLN,
    PRCTR TYPE FAGLFLEXA-PRCTR,
    SEGMENT TYPE FAGLFLEXA-SEGMENT,
END OF TY_FAGL.
DATA: GT_FAGL TYPE TABLE OF TY_FAGL,
        GS_FAGL TYPE TY_FAGL.
IF I_INITFLAG = SBIWA_C_FLAG_ON.
    CASE I_DSOURCE.
      WHEN 'ZFI_GL_M4'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
     this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUKRS'.
        MOVE-CORRESPONDING L_S_SELECT TO R_BUKRS.
        APPEND R_BUKRS.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GJAHR'.
        MOVE-CORRESPONDING L_S_SELECT TO R_GJAHR.
        APPEND R_GJAHR.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUDAT'.
        MOVE-CORRESPONDING L_S_SELECT TO R_BUDAT.
        APPEND R_BUDAT.
      ENDLOOP.
*GRIR Inventory (RM/Stores/Spares/FG)   10502001
*GRIR Services & Others Payable   10502002
      R_HKONT-SIGN = 'I'. "i_t_select-sign.
      R_HKONT-OPTION = 'BT'." i_t_select-option.
      R_HKONT-LOW = '0010502001'.
      R_HKONT-HIGH = '0010502002'. "i_t_select-high.
      APPEND R_HKONT.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
      OPEN CURSOR WITH HOLD S_CURSOR FOR
       SELECT BUKRS
              AUGBL
              ZUONR
              BELNR
              GJAHR
              BUZEI
              BUDAT
              HKONT
              BLART
              MONAT
              BSCHL
              SHKZG
              DMBTR
              WAERS
              FROM BSIS
             INTO TABLE E_T_DATA
              WHERE BUKRS IN R_BUKRS
                AND GJAHR IN R_GJAHR
                AND BUDAT IN R_BUDAT
                AND HKONT IN R_HKONT.
Fetch records into interface table.
named E_T_'Name of extract structure'.
    FETCH NEXT CURSOR S_CURSOR
               APPENDING CORRESPONDING FIELDS
               OF TABLE E_T_DATA1
               PACKAGE SIZE S_S_IF-MAXSIZE.
    IF SY-SUBRC <> 0.
      CLOSE CURSOR S_CURSOR.
      RAISE NO_MORE_DATA.
    ENDIF.
DELETE E_T_DATA WHERE BLART NE 'WE'.
      SELECT BUKRS
             AUGBL
             ZUONR
             BELNR
             GJAHR
             BUZEI
             BUDAT
             HKONT
             BLART
             MONAT
             BSCHL
             SHKZG
             DMBTR
             WAERS
             FROM BSAS
             into table   E_T_DATA
             WHERE BUKRS IN R_BUKRS
               AND GJAHR IN R_GJAHR
               AND BUDAT IN R_BUDAT
               AND HKONT IN R_HKONT.
           FETCH NEXT CURSOR S_CURSOR
              APPENDING CORRESPONDING FIELDS
              OF TABLE E_T_DATA
              PACKAGE SIZE S_S_IF-MAXSIZE.
append LINES OF e_t_data1 TO E_T_DATA.
DELETE E_T_DATA WHERE BLART NE 'WE'.
ENDIF.                             "First data package ?
    DATA: F_YEAR TYPE BKPF-GJAHR.
    DATA: F_PERI TYPE BAPI0002_4-FISCAL_PERIOD.
IF E_T_DATA[] IS NOT INITIAL.
   SELECT RBUKRS
          RYEAR
          DOCNR
          BUZEI
          DOCLN
          PRCTR
          SEGMENT
          FROM FAGLFLEXA
          INTO TABLE GT_FAGL
          FOR ALL ENTRIES IN E_T_DATA
       WHERE RYEAR = E_T_DATA-GJAHR
           AND DOCNR = E_T_DATA-BELNR
           AND RLDNR = '0L'
           AND RBUKRS = E_T_DATA-BUKRS
           AND BUZEI = E_T_DATA-BUZEI.
         WHERE RYEAR = E_T_DATA-GJAHR
           AND DOCNR = E_T_DATA-BELNR
           AND RBUKRS = E_T_DATA-BUKRS.
     AND DOCLN = E_T_DATA-BUZEI.
ENDIF.
LOOP AT E_T_DATA.
      IF E_T_DATA-SHKZG = 'H'.
        E_T_DATA-DMBTR = E_T_DATA-DMBTR * -1.
      ENDIF.
      CLEAR: F_YEAR.
      CALL FUNCTION 'BAPI_COMPANYCODE_GET_PERIOD'
        EXPORTING
          COMPANYCODEID       = E_T_DATA-BUKRS
          POSTING_DATE        = E_T_DATA-BUDAT
       IMPORTING
         FISCAL_YEAR         = F_YEAR
         FISCAL_PERIOD       = F_PERI.
      DATA: V_DOC(6) TYPE C .
      CLEAR: V_DOC.
      V_DOC = E_T_DATA-BUZEI.
      IF V_DOC IS NOT INITIAL.
        CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
          EXPORTING
            INPUT = V_DOC
          IMPORTING
            OUTPUT = V_DOC.
      ENDIF.
     aS PROFIT center is not updated in all the lines in Bsis
      READ TABLE GT_FAGL INTO GS_FAGL WITH KEY RYEAR = E_T_DATA-GJAHR
                                                DOCNR = E_T_DATA-BELNR
                                                RBURS = E_T_DATA-BUKRS
                                                BUZEI = E_T_DATA-BUZEI.
      IF SY-SUBRC = 0.
        E_T_DATA-PRCTR = GS_FAGL-PRCTR.
        E_T_DATA-SEGMENT = GS_FAGL-SEGMENT.
      ENDIF.
*As we are using the amount DMBTR in which the amount
*will be in company code currency that is Local currency
*group currency always in the main company code currency.
      CONCATENATE   F_YEAR '0' F_PERI INTO E_T_DATA-FISCPER.
      MODIFY E_T_DATA. " from gs_bsis transporting dmbtr fiscper.
      CLEAR: E_T_DATA.
    ENDLOOP.
      S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
   ENDIF.

Hi,
Please check the log of same jobs for last week and check is today its taking more time,also check with basis is their any backup initited at same time.
Moreover until the background job failed automatically its difficult to imagine what is the exact issue.
Thanks,

How can you add data from a variable into a column in a data flow?

I need to populate a table with data from a variable. The data type of the variable is String. I'm running into issues doing it the way I am. I have variable
User:VariableName = "Some moderately sized string of data"
When I try to use a Derived Column Transformation Editor to insert the variable into the data flow as a new column, SSIS forces the Data Type to be Unicode String[DT_WSTR] and I can't change it. Additionally the length is 0 and I also can't change that.
When I run the package it errors with a truncation error. If the length is 0 then that makes sense but then why can't I change it to something that makes more sense?
What is the correct way to go about this?

Use advanced editor to change data type and length.
http://www.sureshjoshi.com/development/ssis-string-variables-in-derived-columns/

Delivery date from PO not updated with inbound delivery (EDI) date

Dear all,
The delivery date in the purchase order (as per my understanding) is the purchase order creation date + the planned delivery time.
We are using EDI and an inbound delivery gets created when the shipping notification is received from the vendor.
The real inbound delivery (EDI) date is usually different from the planned delivery date of the purchase order. But the problem is that the delivery date from the PO is not getting updated with the EDI delivery date.
Is it possible to have the delivery date from the PO updated with the real EDI delivery date?
I need this because I want to calculate planned delivery costs based on the EDI delivery date, and so far when I post the goods receipt (Price Date Category = "Delivery date" in the PO), the system is taking the price valid at the delivery date from the PO instead of taking the price valid at the delivery date of the EDI message.
Thanks a lot,
Annabelle R.

We have applied the note 793478 "Change of the pricing date in EXIT SAPLEINR 003".
In our process flow, an inbound delivery is created with reference to the PO, then the goods receipt is done with reference to this inbound delivery.
When the option 5 "Goods receipt date" is selected in the Conditions Control tab of the purchase order, now when the goods receipt is posted, the price is calculated based on the inbound delivery date, which is what we wanted.

Extracting data from Legacy system - How do we get the data into a normaliz

Hi All,
Requirement that I have now is to get the data from 6 different tables ORACLE database to BI using DB Connect, where in each of those 6 tables has the transactional data as well - If it is only 2 tables, would have been creating a view and get the data. Each of the 6 tables are linked to one other by the Primary Key and Foreign key relation ship.
If it is from ERP system we would have created a Functional Module.
Please advice me on how to get the data to BI end from those tables in Legacy system.
Thanks in advance.

Anil:
I recommend following Ralph Kimball's EDW data modeling principles.
Have a staging layer of DSO's with data dump from source system. So have 6 different DSO's extracting data from 6 tables from source system independently.
Then have an integeration layer of DSO's depending on requirement. You could combine data from 2 or more DSO's here based on requirement and integrate your data here. Use primary key foreign key relationships here to do look ups or direct loads to do your business logic.
Then have an analytical layer of InfoCubes, MultiProviders, InfoSets as required.
The 3 layered architecture is a standard best practice that i have seen followed in many organizations. You could search for this type of architecture online under EDW (Enterprise Data Warehouse). There should be plenty of information available.
Good Luck.
MP.

Migrating (uninstalling and reinstalling) agents from 12.1.0.1 to 12.1.0.2

We have an existing Cloud Control 12.1.0.1 installation with about 40 agent deployments across our enterprise. Having run into many bugs in 12.1.0.1 that are ostensibly fixed in 12.1.0.2, we are planning to upgrade - however it appears that the recommendation is to install a new 12.1.0.2 Cloud Control and migrate agents from the old system to the new.
We have installed the new system, but are looking for an efficient way to migrate the existing agents, as the Oracle docs state that the agent must be removed from the original 12.1.0.1 system prior to adding to the new 12.1.0.2 system. Not sure if Oracle docs are incomplete, as none of the instructions reference using the Cloud to 'Remove Target' on the agent (yet this functionality appears to exist) - I am hoping that given that we are able to deploy an agent through cloud we should also be able to remove it via cloud?
If not, is the only way to remove by using the runInstaller -deinstall in each agent home across our enterprise? If so, the docs are somewhat sparse on which installed products to remove with the graphical installer, should I be removing:
- agent12g1
- sbin12g1
- oracle_sysman_xxxxxx_12_1_0_1_0_discovery_Home0 (and all permutations?)

Hi ngilbert
If my understanding is not correct from your posting, drop me an email and we can discuss your requirement further.
1) if you are upgrade your agents from 12.1. to 12.2 then you have to use agent upgrade console to do that and it does an out of place agent upgrade ( you get a new agent home)
To clarify, you don’t have to re-install the agent to upgrade an agent from 12.1 to 12.2. You can argue that out of place upgrade is equivalent to fresh install of 12.2 but as a part of this agent upgrade process we upgrade plug ins, migrate the agent config and other details.
2) If your concern is how to delete the old 12.1 agent home on multiple target host after agent upgrade? Then yes, this an requirement for us to automate this process to clean up the old agent homes while doing an agent upgrade from 12.1. to 12.2. For time being, as I mentioned earlier we detach the old 12.1 agent home from inventory so the only thing you have to do is to remove the old home directories.
3) Are you also trying to migrate your operating system on the OMS or Repository host as a part of this upgrade ?

How to migrate catehery and chat room from one lync 2013 PR pool to other

Looks weired question, But i am working on to moveing chat room anmd catagory from one lync 2013 PR pool to other persietenc pool in different site.
Any one has nay idea or any post talking about ??
Anil MCC 2011,ITIL V3,MCSA 2003,MCTS 2010, My Blog : http://messagingschool.wordpress.com

Hi Surya,
Do you want to show just 2 rows, one for an "Adjusted AC_41AB" and one for "AC_41ABC"?
If so, could you not just choose AC_41AB and AC_41ABC as the Dimension Members, then create a local member to be the "Adjusted AC_41AB" which is a calculation of AC_41AB minus AC_41ABC. Then you could hide the non-adjusted AC_41AB row so that it's not visible?
If I get a chance I will test it and let you know.
Regards
John.

Migration CC and FF data from Virsa 4.0 to GRC 10.1 Data Inconsistency

Similar Messages

Maybe you are looking for